commit 53cf5797f1 upstream
Gather Data Sampling (GDS) is mitigated in microcode. However, on
systems that haven't received the updated microcode, disabling AVX
can act as a mitigation. Add a Kconfig option that uses the microcode
mitigation if available and disables AVX otherwise. Setting this
option has no effect on systems not affected by GDS. This is the
equivalent of setting gather_data_sampling=force.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 553a5c03e9 upstream
The Gather Data Sampling (GDS) vulnerability allows malicious software
to infer stale data previously stored in vector registers. This may
include sensitive data such as cryptographic keys. GDS is mitigated in
microcode, and systems with up-to-date microcode are protected by
default. However, any affected system that is running with older
microcode will still be vulnerable to GDS attacks.
Since the gather instructions used by the attacker are part of the
AVX2 and AVX512 extensions, disabling these extensions prevents gather
instructions from being executed, thereby mitigating the system from
GDS. Disabling AVX2 is sufficient, but we don't have the granularity
to do this. The XCR0[2] disables AVX, with no option to just disable
AVX2.
Add a kernel parameter gather_data_sampling=force that will enable the
microcode mitigation if available, otherwise it will disable AVX on
affected systems.
This option will be ignored if cmdline mitigations=off.
This is a *big* hammer. It is known to break buggy userspace that
uses incomplete, buggy AVX enumeration. Unfortunately, such userspace
does exist in the wild:
https://www.mail-archive.com/bug-coreutils@gnu.org/msg33046.html
[ dhansen: add some more ominous warnings about disabling AVX ]
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8974eb5882 upstream
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b81fac906a upstream
Initializing the FPU during the early boot process is a pointless
exercise. Early boot is convoluted and fragile enough.
Nothing requires that the FPU is set up early. It has to be initialized
before fork_init() because the task_struct size depends on the FPU register
buffer size.
Move the initialization to arch_cpu_finalize_init() which is the perfect
place to do so.
No functional change.
This allows to remove quite some of the custom early command line parsing,
but that's subject to the next installment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.902376621@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1703db2b90 upstream
No point in keeping them around.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.841685728@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f34bb2a24 upstream
Nothing in the call chain requires it
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.783704297@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54d9a91a3d upstream
No point in doing this during really early boot. Move it to an early
initcall so that it is set up before possible user mode helpers are started
during device initialization.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.727330699@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 439e17576e upstream
Invoke the X86ism mem_encrypt_init() from X86 arch_cpu_finalize_init() and
remove the weak fallback from the core code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.670360645@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9df9d2f047 upstream
X86 is reworking the boot process so that initializations which are not
required during early boot can be moved into the late boot process and out
of the fragile and restricted initial boot phase.
arch_cpu_finalize_init() is the obvious place to do such initializations,
but arch_cpu_finalize_init() is invoked too late in start_kernel() e.g. for
initializing the FPU completely. fork_init() requires that the FPU is
initialized as the size of task_struct on X86 depends on the size of the
required FPU register buffer.
Fortunately none of the init calls between calibrate_delay() and
arch_cpu_finalize_init() is relevant for the functionality of
arch_cpu_finalize_init().
Invoke it right after calibrate_delay() where everything which is relevant
for arch_cpu_finalize_init() has been set up already.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/r/20230613224545.612182854@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61235b24b9 upstream
Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9349b5cd09 upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230613224545.493148694@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44ade508e3 upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20230613224545.431995857@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01eb454e9b upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.371697797@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f066a22fe upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.312438573@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ceecc2589 upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230613224545.254342916@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9841c42316 upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.195288218@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c38e30056 upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.137045745@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee31bb0524 upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.078124882@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c7077a726 upstream
check_bugs() is a dumping ground for finalizing the CPU bringup. Only parts of
it has to do with actual CPU bugs.
Split it apart into arch_cpu_finalize_init() and cpu_select_mitigations().
Fixup the bogus 32bit comments while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230613224545.019583869@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7725acaa4f upstream
check_bugs() has become a dumping ground for all sorts of activities to
finalize the CPU initialization before running the rest of the init code.
Most are empty, a few do actual bug checks, some do alternative patching
and some cobble a CPU advertisement string together....
Aside of that the current implementation requires duplicated function
declaration and mostly empty header files for them.
Provide a new function arch_cpu_finalize_init(). Provide a generic
declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub
inline otherwise.
This requires a temporary #ifdef in start_kernel() which will be removed
along with check_bugs() once the architectures are converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00ae1491f9 upstream.
Smatch detected potential error pointer dereference.
drivers/gpu/drm/drm_syncobj.c:888 drm_syncobj_transfer_to_timeline()
error: 'fence' dereferencing possible ERR_PTR()
The error pointer comes from dma_fence_allocate_private_stub(). One
caller expected error pointers and one expected NULL pointers. Change
it to return NULL and update the caller which expected error pointers,
drm_syncobj_assign_null_handle(), to check for NULL instead.
Fixes: f781f661e8 ("dma-buf: keep the signaling time of merged fences v3")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b09f1996-3838-4fa2-9193-832b68262e43@moroto.mountain
Cc: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f781f661e8 upstream.
Some Android CTS is testing if the signaling time keeps consistent
during merges.
v2: use the current time if the fence is still in the signaling path and
the timestamp not yet available.
v3: improve comment, fix one more case to use the correct timestamp
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630120041.109216-1-christian.koenig@amd.com
Cc: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c21e066f9 upstream.
mbind() calls down into vma_replace_policy() without taking the per-VMA
locks, replaces the VMA's vma->vm_policy pointer, and frees the old
policy. That's bad; a concurrent page fault might still be using the
old policy (in vma_alloc_folio()), resulting in use-after-free.
Normally this will manifest as a use-after-free read first, but it can
result in memory corruption, including because vma_alloc_folio() can
call mpol_cond_put() on the freed policy, which conditionally changes
the policy's refcount member.
This bug is specific to CONFIG_NUMA, but it does also affect non-NUMA
systems as long as the kernel was built with CONFIG_NUMA.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Fixes: 5e31275cc9 ("mm: add per-VMA lock and helper functions to control it")
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c54312f96 upstream.
It was pointed out[1] that using folio_test_hwpoison() is wrong as we need
to check the indiviual page that has poison. folio_test_hwpoison() only
checks the head page so go back to using PageHWPoison().
User-visible effects include existing hwpoison-inject tests possibly
failing as unpoisoning a single subpage could lead to unpoisoning an
entire folio. Memory unpoisoning could also not work as expected as
the function will break early due to only checking the head page and
not the actually poisoned subpage.
[1]: https://lore.kernel.org/lkml/ZLIbZygG7LqSI9xe@casper.infradead.org/
Link: https://lkml.kernel.org/r/20230717181812.167757-1-sidhartha.kumar@oracle.com
Fixes: a6fddef49e ("mm/memory-failure: convert unpoison_memory() to folios")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1f02b9575 upstream.
mm->mm_lock_seq effectively functions as a read/write lock; therefore it
must be used with acquire/release semantics.
A specific example is the interaction between userfaultfd_register() and
lock_vma_under_rcu().
userfaultfd_register() does the following from the point where it changes
a VMA's flags to the point where concurrent readers are permitted again
(in a simple scenario where only a single private VMA is accessed and no
merging/splitting is involved):
userfaultfd_register
userfaultfd_set_vm_flags
vm_flags_reset
vma_start_write
down_write(&vma->vm_lock->lock)
vma->vm_lock_seq = mm_lock_seq [marks VMA as busy]
up_write(&vma->vm_lock->lock)
vm_flags_init
[sets VM_UFFD_* in __vm_flags]
vma->vm_userfaultfd_ctx.ctx = ctx
mmap_write_unlock
vma_end_write_all
WRITE_ONCE(mm->mm_lock_seq, mm->mm_lock_seq + 1) [unlocks VMA]
There are no memory barriers in between the __vm_flags update and the
mm->mm_lock_seq update that unlocks the VMA, so the unlock can be
reordered to above the `vm_flags_init()` call, which means from the
perspective of a concurrent reader, a VMA can be marked as a userfaultfd
VMA while it is not VMA-locked. That's bad, we definitely need a
store-release for the unlock operation.
The non-atomic write to vma->vm_lock_seq in vma_start_write() is mostly
fine because all accesses to vma->vm_lock_seq that matter are always
protected by the VMA lock. There is a racy read in vma_start_read()
though that can tolerate false-positives, so we should be using
WRITE_ONCE() to keep things tidy and data-race-free (including for KCSAN).
On the other side, lock_vma_under_rcu() works as follows in the relevant
region for locking and userfaultfd check:
lock_vma_under_rcu
vma_start_read
vma->vm_lock_seq == READ_ONCE(vma->vm_mm->mm_lock_seq) [early bailout]
down_read_trylock(&vma->vm_lock->lock)
vma->vm_lock_seq == READ_ONCE(vma->vm_mm->mm_lock_seq) [main check]
userfaultfd_armed
checks vma->vm_flags & __VM_UFFD_FLAGS
Here, the interesting aspect is how far down the mm->mm_lock_seq read can
be reordered - if this read is reordered down below the vma->vm_flags
access, this could cause lock_vma_under_rcu() to partly operate on
information that was read while the VMA was supposed to be locked. To
prevent this kind of downwards bleeding of the mm->mm_lock_seq read, we
need to read it with a load-acquire.
Some of the comment wording is based on suggestions by Suren.
BACKPORT WARNING: One of the functions changed by this patch (which I've
written against Linus' tree) is vma_try_start_write(), but this function
no longer exists in mm/mm-everything. I don't know whether the merged
version of this patch will be ordered before or after the patch that
removes vma_try_start_write(). If you're backporting this patch to a tree
with vma_try_start_write(), make sure this patch changes that function.
Link: https://lkml.kernel.org/r/20230721225107.942336-1-jannh@google.com
Fixes: 5e31275cc9 ("mm: add per-VMA lock and helper functions to control it")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8ab9f7b64 upstream.
When VMAs are merged, dup_anon_vma() is called with `dst` pointing to the
VMA that is being expanded to cover the area previously occupied by
another VMA. This currently happens while `dst` is not write-locked.
This means that, in the `src->anon_vma && !dst->anon_vma` case, as soon as
the assignment `dst->anon_vma = src->anon_vma` has happened, concurrent
page faults can happen on `dst` under the per-VMA lock. This is already
icky in itself, since such page faults can now install pages into `dst`
that are attached to an `anon_vma` that is not yet tied back to the
`anon_vma` with an `anon_vma_chain`. But if `anon_vma_clone()` fails due
to an out-of-memory error, things get much worse: `anon_vma_clone()` then
reverts `dst->anon_vma` back to NULL, and `dst` remains completely
unconnected to the `anon_vma`, even though we can have pages in the area
covered by `dst` that point to the `anon_vma`.
This means the `anon_vma` of such pages can be freed while the pages are
still mapped into userspace, which leads to UAF when a helper like
folio_lock_anon_vma_read() tries to look up the anon_vma of such a page.
This theoretically is a security bug, but I believe it is really hard to
actually trigger as an unprivileged user because it requires that you can
make an order-0 GFP_KERNEL allocation fail, and the page allocator tries
pretty hard to prevent that.
I think doing the vma_start_write() call inside dup_anon_vma() is the most
straightforward fix for now.
For a kernel-assisted reproducer, see the notes section of the patch mail.
Link: https://lkml.kernel.org/r/20230721034643.616851-1-jannh@google.com
Fixes: 5e31275cc9 ("mm: add per-VMA lock and helper functions to control it")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 588159009d upstream.
An attempt to acquire exclusive lock can race with the current lock
owner closing the image:
1. lock is held by client123, rbd_lock() returns -EBUSY
2. get_lock_owner_info() returns client123 instance details
3. client123 closes the image, lock is released
4. find_watcher() returns 0 as there is no matching watcher anymore
5. client123 instance gets erroneously blocklisted
Particularly impacted is mirror snapshot scheduler in snapshot-based
mirroring since it happens to open and close images a lot (images are
opened only for as long as it takes to take the next mirror snapshot,
the same client instance is used for all images).
To reduce the potential for erroneous blocklisting, retrieve the lock
owner again after find_watcher() returns 0. If it's still there, make
sure it matches the previously detected lock owner.
Cc: stable@vger.kernel.org # f38cb9d9c2: rbd: make get_lock_owner_info() return a single locker or NULL
Cc: stable@vger.kernel.org # 8ff2c64c97: rbd: harden get_lock_owner_info() a bit
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ff2c64c97 upstream.
- we want the exclusive lock type, so test for it directly
- use sscanf() to actually parse the lock cookie and avoid admitting
invalid handles
- bail if locker has a blank address
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f38cb9d9c2 upstream.
Make the "num_lockers can be only 0 or 1" assumption explicit and
simplify the API by getting rid of output parameters in preparation
for calling get_lock_owner_info() twice before blocklisting.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e4ab7b4c8 upstream.
When using the cleaner policy to decommission the cache, there is
never any writeback started from the cache as it is constantly delayed
due to normal I/O keeping the device busy. Meaning @idle=false was
always being passed to clean_target_met()
Fix this by adding a specific 'cleaner' flag that is set when the
cleaner policy is configured. This flag serves to always allow the
cleaner's writeback work to be queued until the cache is
decommissioned (even if the cache isn't idle).
Reported-by: David Jeffery <djeffery@redhat.com>
Fixes: b29d4986d0 ("dm cache: significant rework to leverage dm-bio-prison-v2")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3844ed5e78 upstream.
Dpt objects that are created from internal get evicted when there is
memory pressure and do not get restored when pinned during scanout. The
pinned page table entries look corrupted and programming the display
engine with the incorrect pte's result in DE throwing pipe faults.
Create DPT objects from shmem and mark the object as dirty when pinning so
that the object is restored when shrinker evicts an unpinned buffer object.
v2: Unconditionally mark the dpt objects dirty during pinning(Chris).
Fixes: 0dc987b699 ("drm/i915/display: Add smem fallback allocation for dpt")
Cc: <stable@vger.kernel.org> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718225118.2562132-1-radhakrishna.sripada@intel.com
(cherry picked from commit e91a777a6e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50164507f6 upstream.
Even the 'disable_send_metrics' is true so when the session is
being opened it will always trigger to send the metric for the
first time.
Cc: stable@vger.kernel.org
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac4436a5b2 upstream.
Since commit 3d439b1a2a ("thermal/core: Alloc-copy-free the thermal
zone parameters structure"), thermal_zone_device_register() allocates
a copy of the tzp argument and frees it when unregistering, so
thermal_of_zone_register() now ends up leaking its original tzp and
double-freeing the tzp copy. Fix this by locating tzp on stack instead.
Fixes: 3d439b1a2a ("thermal/core: Alloc-copy-free the thermal zone parameters structure")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 6.4+ <stable@vger.kernel.org> # 6.4+: 8bcbb18c61d6: thermal: core: constify params in thermal_zone_device_register
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8527beb120 upstream.
The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.
Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.
Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.
Fixes: 69728051f5 ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq")
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05d881b85b upstream.
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline.
Fixes: d4d5be94a8 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f061e2be86 upstream.
The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:
wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16
Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21d9b73a7d upstream.
Currently the mptcp code generate a "new listener" event even
if the actual listen() syscall fails. Address the issue moving
the event generation call under the successful branch.
Cc: stable@vger.kernel.org
Fixes: f8c9dfbd87 ("mptcp: add pm listener events")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-2-6f60fe7137a9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 856d8e3c63 upstream.
The DASD driver has certain types of requests that might be rejected by
the storage server or z/VM because they are not supported. Since the
missing support of the command is not a real issue there is no user
visible kernel error message for this.
For copy pair setups there is a specific error that IO is not allowed on
secondary devices. This error case is explicitly handled and an error
message is printed.
The code checking for the error did use a bitwise 'and' that is used to
check for specific bits. But in this case the whole sense byte has to
match.
This leads to the problem that the copy pair related error message is
erroneously printed for other error cases that are usually not reported.
This might heavily confuse users and lead to follow on actions that might
disrupt application processing.
Fix by checking the sense byte for the exact value and not single bits.
Cc: stable@vger.kernel.org # 6.1+
Fixes: 1fca631a11 ("s390/dasd: suppress generic error messages for PPRC secondary devices")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05f1d8ed03 upstream.
Quiesce and resume are functions that tell the DASD driver to stop/resume
issuing I/Os to a specific DASD.
On resume dasd_schedule_block_bh() is called to kick handling of IO
requests again. This does unfortunately not cover internal requests which
are used for path verification for example.
This could lead to a hanging device when a path event or anything else
that triggers internal requests occurs on a quiesced device.
Fix by also calling dasd_schedule_device_bh() which triggers handling of
internal requests on resume.
Fixes: 8e09f21574 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 350cd9b959 upstream.
There was an invalidate_inode_pages2 added to readonly mmap path
that is unnecessary since that path is only entered when writeback
cache is disabled on mount.
Cc: stable@vger.kernel.org
Fixes: 1543b4c507 ("fs/9p: remove writeback fid and fix per-file modes")
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09430aba3a upstream.
There were two flags (s_flags and s_cache) which had incorrect signed
type in the parameters of the file cache mode helper function.
Cc: stable@vger.kernel.org
Fixes: 1543b4c507 ("fs/9p: remove writeback fid and fix per-file modes")
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 878cb3e033 upstream.
There appears to be a typo in the comparison statement for the logic
which sets a file's cache mode based on mount flags.
Cc: stable@vger.kernel.org
Fixes: 1543b4c507 ("fs/9p: remove writeback fid and fix per-file modes")
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75b396821c upstream.
This eliminates a check for shared that was overrestrictive and
prevented read-only mmaps when writeback caches weren't enabled.
Cc: stable@vger.kernel.org
Fixes: 1543b4c507 ("fs/9p: remove writeback fid and fix per-file modes")
Reported-by: Robert Schwebel <r.schwebel@pengutronix.de>
Closes: https://lore.kernel.org/v9fs/ZK25XZ%2BGpR3KHIB%2F@pengutronix.de
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eee4a119e9 upstream.
retval from filemap_fdatawrite was immediately overwritten by the
following p9_fid_put: preserve any error in fdatawrite if there
was any first.
This fixes the following scan-build warning:
fs/9p/vfs_dir.c:220:4: warning: Value stored to 'retval' is never read [deadcode.DeadStores]
retval = filemap_fdatawrite(inode->i_mapping);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 89c58cb395 ("fs/9p: fix error reporting in v9fs_dir_release")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de0e30bee8 upstream.
Currently nettrace does not work on LoongArch due to missing
bpf_probe_read{,str}() support, with the error message:
ERROR: failed to load kprobe-based eBPF
ERROR: failed to load kprobe-based bpf
According to commit 0ebeea8ca8 ("bpf: Restrict bpf_probe_read{,
str}() only to archs where they work"), we only need to select
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to add said support,
because LoongArch does have non-overlapping address ranges for kernel
and userspace.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4eece7e6de upstream.
As the code comment says, the initial aim is to reduce one instruction
in some corner cases, if bit[51:31] is all 0 or all 1, no need to call
lu32id. That is to say, it should call lu32id only if bit[51:31] is not
all 0 and not all 1. The current code always call lu32id, the result is
right but the logic is unexpected and wrong, fix it.
Cc: stable@vger.kernel.org # 6.1
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Reported-by: Colin King (gmail) <colin.i.king@gmail.com>
Closes: https://lore.kernel.org/all/bcf97046-e336-712a-ac68-7fd194f2953e@gmail.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e66d511fc9 upstream.
This patch fixes an underflow issue in the return value within the
exception path, specifically at .Llt8 when the remaining length is less
than 8 bytes.
Cc: stable@vger.kernel.org
Fixes: 8941e93ca5 ("LoongArch: Optimize memory ops (memset/memcpy/memmove)")
Reported-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dddfa05eb5 upstream.
This reverts commit 9b0da3f223.
The sigio.c is clearly user space code which is handled by
arch/um/scripts/Makefile.rules (see USER_OBJS rule).
The above mentioned commit simply broke this agreement,
we may not use Linux kernel internal headers in them without
thorough thinking.
Hence, revert the wrong commit.
Link: https://lkml.kernel.org/r/20230724143131.30090-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307212304.cH79zJp1-lkp@intel.com/
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Richard Weinberger <richard@nod.at>
Cc: Yang Guang <yang.guang5@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c40d6b3249 upstream.
The soundwire subsystem uses two completion structures that allow
drivers to wait for soundwire device to become enumerated on the bus and
initialised by their drivers, respectively.
The code implementing the signalling is currently broken as it does not
signal all current and future waiters and also uses the wrong
reinitialisation function, which can potentially lead to memory
corruption if there are still waiters on the queue.
Not signalling future waiters specifically breaks sound card probe
deferrals as codec drivers can not tell that the soundwire device is
already attached when being reprobed. Some codec runtime PM
implementations suffer from similar problems as waiting for enumeration
during resume can also timeout despite the device already having been
enumerated.
Fixes: fb9469e54f ("soundwire: bus: fix race condition with enumeration_complete signaling")
Fixes: a90def0681 ("soundwire: bus: fix race condition with initialization_complete signaling")
Cc: stable@vger.kernel.org # 5.7
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
