[ Upstream commit a7e73339ad ]
Now that the differences in ARL entry formats are neatly contained into
functions per chip family, wrap them into an ops struct and add wrapper
functions to access them.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-7-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8e46aacea4 ("net: dsa: b53: use same ARL search result offset for BCM5325/65")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0c476f325 ]
Split reading search entries into a function for each format.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-6-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8e46aacea4 ("net: dsa: b53: use same ARL search result offset for BCM5325/65")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1716be6db0 ]
In order to more easily support more formats, move accessing
ARL_SRCH_CTL into helper functions to contain the differences.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-5-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8e46aacea4 ("net: dsa: b53: use same ARL search result offset for BCM5325/65")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a291fe722 ]
Instead of duplicating the whole code iterating over all bins for
BCM5325, factor out reading and parsing the entry into its own
functions, and name it the modern one after the first chip with that ARL
format, (BCM53)95.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8e46aacea4 ("net: dsa: b53: use same ARL search result offset for BCM5325/65")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6e4fd38bf ]
Align the b53_arl_read{,25}() functions by consistently using the
parsed arl entry instead of parsing the raw registers again.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8e46aacea4 ("net: dsa: b53: use same ARL search result offset for BCM5325/65")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9316012dd0 ]
BCM5325/65's Entry register uses the highest three bits for
VALID/STATIC/AGE, so shifting by 53 only will add these to
b53_arl_entry::vid.
So make sure to mask the vid value as well, to not get invalid VIDs.
Fixes: c45655386e ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f268e275c ]
Since BCM5325 and BCM5365 only support up to 256 VLANs, the VLAN_ID_IDX
register is only 8 bit wide, not 16 bit, so use an appropriate accessor.
Fixes: c45655386e ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc10cf1368 ]
sc->first_error might already be set and sc->status
is thus unexpected, so this should avoid the WARN[_ON]_ONCE()
if sc->first_error is already set and have a usable error path.
While there set sc->first_error as soon as possible.
This is done based on a problem seen in similar places on
the server. And there it was already very useful in order
to find the problem when we have a meaningful WARN_ONCE()
that prints details about the connection.
This is much more useful:
[ 309.560973] expected[NEGOTIATE_NEEDED] != RDMA_CONNECT_RUNNING
first_error=0 local=192.168.0.200:445 remote=192.168.0.100:60445
[ 309.561034] WARNING: CPU: 2 PID: 78 at transport_rdma.c:643
recv_done+0x2fa/0x3d0 [ksmbd]
than what we had before (only):
[ 894.140316] WARNING: CPU: 1 PID: 116 at
fs/smb/server/transport_rdma.c:642 recv_done+0x308/0x360 [ksmbd]
Fixes: 58dfba8a2d ("smb: client/smbdirect: replace SMBDIRECT_SOCKET_CONNECTING with more detailed states")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Paulo Alcantara <pc@manguebit.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1adb2dab97 ]
These will be used in various places in order to assert
the current status mostly during the connect and negotiation
phase. It will replace the WARN_ON_ONCE(sc->status != ...)
calls, which are very useless in order to identify the
problem that happened.
As a start client and server will need to define their own
__SMBDIRECT_SOCKET_DISCONNECT(__sc) macro in order to use
SMBDIRECT_CHECK_STATUS_DISCONNECT().
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Paulo Alcantara <pc@manguebit.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 425c32750b ("smb: server: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smb_direct_cm_handler()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f3fd108c5 ]
This can be used like this:
int err = somefunc();
pr_warn("err=%1pe\n", SMBDIRECT_DEBUG_ERR_PTR(err));
This will be used in the following fixes in order
to be prepared to identify real world problems
more easily.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Paulo Alcantara <pc@manguebit.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 425c32750b ("smb: server: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smb_direct_cm_handler()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b276445e98 ]
Some keystone clock drivers can be selected when COMPILE_TEST is
enabled but since commit b745c0794e ("clk: keystone: Add sci-clk
driver support") they are never actually built.
Enable compile testing by allowing the build system to process the
keystone drivers.
Fixes: b745c0794e ("clk: keystone: Add sci-clk driver support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a913d1f6a7 ]
Following test can cause IO hang:
mdadm -CvR /dev/md0 -l10 -n4 /dev/sd[abcd] --assume-clean --chunk=64K --bitmap=none
sleep 5
echo 1 > /sys/block/sda/device/delete
echo 1 > /sys/block/sdb/device/delete
echo 1 > /sys/block/sdc/device/delete
echo 1 > /sys/block/sdd/device/delete
dd if=/dev/md0 of=/dev/null bs=8k count=1 iflag=direct
Root cause:
1) all disks removed, however all rdevs in the array is still in sync,
IO will be issued normally.
2) IO failure from sda, and set badblocks failed, sda will be faulty
and MD_SB_CHANGING_PENDING will be set.
3) error recovery try to recover this IO from other disks, IO will be
issued to sdb, sdc, and sdd.
4) IO failure from sdb, and set badblocks failed again, now array is
broken and will become read-only.
5) IO failure from sdc and sdd, however, stripe can't be handled anymore
because MD_SB_CHANGING_PENDING is set:
handle_stripe
handle_stripe
if (test_bit MD_SB_CHANGING_PENDING)
set_bit STRIPE_HANDLE
goto finish
// skip handling failed stripe
release_stripe
if (test_bit STRIPE_HANDLE)
list_add_tail conf->hand_list
6) later raid5d can't handle failed stripe as well:
raid5d
md_check_recovery
md_update_sb
if (!md_is_rdwr())
// can't clear pending bit
return
if (test_bit MD_SB_CHANGING_PENDING)
break;
// can't handle failed stripe
Since MD_SB_CHANGING_PENDING can never be cleared for read-only array,
fix this problem by skip this checking for read-only array.
Link: https://lore.kernel.org/linux-raid/20251117085557.770572-3-yukuai@fnnas.com
Fixes: d87f064f58 ("md: never update metadata when array is read-only.")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e81fa8d80 ]
The "qcom,halt-regs" consists of a phandle reference followed by the
three offsets within syscon for halt registers. Thus, we need to
request 4 integers from of_property_read_variable_u32_array(), with
the halt_reg ofsets at indexes 1, 2, and 3. Offset 0 is the phandle.
With MAX_HALT_REG at 3, of_property_read_variable_u32_array() returns
-EOVERFLOW, causing .probe() to fail.
Increase MAX_HALT_REG to 4, and update the indexes accordingly.
Fixes: 0af65b9b91 ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://lore.kernel.org/r/20251129013207.3981517-1-mr.nuke.me@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81d5a6a438 ]
In addition to deferring to the trylock fallback in NMIs, only do so
when an rqspinlock waiter is queued on the current CPU. This is detected
by noticing a non-zero node index. This allows NMI waiters to join the
waiter queue if it isn't interrupting an existing rqspinlock waiter, and
increase the chances of fairly obtaining the lock, performing deadlock
detection as the head, and not being starved while attempting the
trylock.
The trylock path in particular is unlikely to succeed under contention,
as it relies on the lock word becoming 0, which indicates no contention.
This means that the most likely result for NMIs attempting a trylock is
a timeout under contention if they don't hit an AA or ABBA case.
The core problem being addressed through the fixed commit was removing
the dependency edge between an NMI queue waiter and the queue waiter it
is interrupting. Whenever a circular dependency forms, and with no way
to break it (as non-head waiters don't poll for deadlocks or timeouts),
we would enter into a deadlock. A trylock either breaks such an edge by
probing for deadlocks, and finally terminating the waiting loop using a
timeout.
By excluding queueing on CPUs where the node index is non-zero for NMIs,
this sort of dependency is broken. The CPU enters the trylock path for
those cases, and falls back to deadlock checks and timeouts. However, in
other case where it doesn't interrupt the CPU in the slow path while its
queued on the lock, it can join the queue as a normal waiter, and avoid
trylock associated starvation and subsequent timeouts.
There are a few remaining cases here that matter: the NMI can still
preempt the owner in its critical section, and if it queues as a
non-head waiter, it can end up impeding the progress of the owner. While
this won't deadlock, since the head waiter will eventually signal the
NMI waiter to either stop (due to a timeout), it can still lead to long
timeouts. These gaps will be addressed in subsequent commits.
Note that while the node count detection approach is less conservative
than simply deferring NMIs to trylock, it is going to return errors
where attempts to lock B in NMI happen while waiters for lock A are in a
lower context on the same CPU. However, this only occurs when the lower
context is queued in the slow path, and the NMI attempt can proceed
without failure in all other cases. To continue to prevent AA deadlocks
(or ABBA in a similar NMI interrupting lower context pattern), we'd need
a more fleshed out algorithm to unlink NMI waiters after they queue and
detect such cases. However, all that complexity isn't appealing yet to
reduce the failure rate in the small window inside the slow path.
It is important to note that reentrancy in the slow path can also happen
through trace_contention_{begin,end}, but in those cases, unlike an NMI,
the forward progress of the head waiter (or the predecessor in general)
is not being blocked.
Fixes: 0d80e7f951 ("rqspinlock: Choose trylock fallback for NMI waiters")
Reported-by: Ritesh Oedayrajsingh Varma <ritesh@superluminal.eu>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251128232802.1031906-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit beb7021a60 ]
Ritesh reported that timeouts occurred frequently for rqspinlock despite
reentrancy on the same lock on the same CPU in [0]. This patch closes
one of the races leading to this behavior, and reduces the frequency of
timeouts.
We currently have a tiny window between the fast-path cmpxchg and the
grabbing of the lock entry where an NMI could land, attempt the same
lock that was just acquired, and end up timing out. This is not ideal.
Instead, move the lock entry acquisition from the fast path to before
the cmpxchg, and remove the grabbing of the lock entry in the slow path,
assuming it was already taken by the fast path. The TAS fallback is
invoked directly without being preceded by the typical fast path,
therefore we must continue to grab the deadlock detection entry in that
case.
Case on lock leading to missed AA:
cmpxchg lock A
<NMI>
... rqspinlock acquisition of A
... timeout
</NMI>
grab_held_lock_entry(A)
There is a similar case when unlocking the lock. If the NMI lands
between the WRITE_ONCE and smp_store_release, it is possible that we end
up in a situation where the NMI fails to diagnose the AA condition,
leading to a timeout.
Case on unlock leading to missed AA:
WRITE_ONCE(rqh->locks[rqh->cnt - 1], NULL)
<NMI>
... rqspinlock acquisition of A
... timeout
</NMI>
smp_store_release(A->locked, 0)
The patch changes the order on unlock to smp_store_release() succeeded
by WRITE_ONCE() of NULL. This avoids the missed AA detection described
above, but may lead to a false positive if the NMI lands between these
two statements, which is acceptable (and preferred over a timeout).
The original intention of the reverse order on unlock was to prevent the
following possible misdiagnosis of an ABBA scenario:
grab entry A
lock A
grab entry B
lock B
unlock B
smp_store_release(B->locked, 0)
grab entry B
lock B
grab entry A
lock A
! <detect ABBA>
WRITE_ONCE(rqh->locks[rqh->cnt - 1], NULL)
If the store release were is after the WRITE_ONCE, the other CPU would
not observe B in the table of the CPU unlocking the lock B. However,
since the threads are obviously participating in an ABBA deadlock, it
is no longer appealing to use the order above since it may lead to a
250 ms timeout due to missed AA detection.
[0]: https://lore.kernel.org/bpf/CAH6OuBTjG+N=+GGwcpOUbeDN563oz4iVcU3rbse68egp9wj9_A@mail.gmail.com
Fixes: 0d80e7f951 ("rqspinlock: Choose trylock fallback for NMI waiters")
Reported-by: Ritesh Oedayrajsingh Varma <ritesh@superluminal.eu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251128232802.1031906-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c909fec69f ]
There are several places where a value of type 'int' is shifted by
lpddr->chipshift. lpddr->chipshift is derived from QINFO geometry and
might reach 31 when QINFO reports a 2 GiB size - the maximum supported by
LPDDR(1) compliant chips. This may cause unexpected sign-extensions when
casting the integer value to the type of 'unsigned long'.
Use '1UL << lpddr->chipshift' and cast 'j' to unsigned long before
shifting so the computation is performed at the destination width.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c68264711c ("[MTD] LPDDR Command set driver")
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5235eb6cf ]
Prevent a kernel warning when netconsole setup fails on devices with
IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in
__flush_work) occurs because the cleanup path tries to cancel an
uninitialized work queue.
When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL,
it fails early and calls skb_pool_flush() for cleanup. This function
calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been
initialized yet, triggering the warning.
Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the
work queue is properly initialized before any potential failure points.
This allows the cleanup path to safely cancel the work queue regardless
of where the setup fails.
Fixes: 248f6571fd ("netpoll: Optimize skb refilling on critical path")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251127-netpoll_fix_init_work-v1-1-65c07806d736@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c28ee720a ]
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b9 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c121a243 ]
Currently, if NVMEM provider is probed later than Aquantia, loading the
firmware will fail with -EINVAL.
To fix this, simply check for -EPROBE_DEFER when NVMEM is attempted and
return it.
Fixes: e93984ebc1 ("net: phy: aquantia: add firmware load support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251127114514.460924-1-robimarko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49c9e09d96 ]
Disconnected files or directories can appear when they are visible and
opened from a bind mount, but have been renamed or moved from the source
of the bind mount in a way that makes them inaccessible from the mount
point (i.e. out of scope).
Previously, access rights tied to files or directories opened through a
disconnected directory were collected by walking the related hierarchy
down to the root of the filesystem, without taking into account the
mount point because it couldn't be found. This could lead to
inconsistent access results, potential access right widening, and
hard-to-debug renames, especially since such paths cannot be printed.
For a sandboxed task to create a disconnected directory, it needs to
have write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) to
the underlying source of the bind mount, and read access to the related
mount point. Because a sandboxed task cannot acquire more access
rights than those defined by its Landlock domain, this could lead to
inconsistent access rights due to missing permissions that should be
inherited from the mount point hierarchy, while inheriting permissions
from the filesystem hierarchy hidden by this mount point instead.
Landlock now handles files and directories opened from disconnected
directories by taking into account the filesystem hierarchy when the
mount point is not found in the hierarchy walk, and also always taking
into account the mount point from which these disconnected directories
were opened. This ensures that a rename is not allowed if it would
widen access rights [1].
The rationale is that, even if disconnected hierarchies might not be
visible or accessible to a sandboxed task, relying on the collected
access rights from them improves the guarantee that access rights will
not be widened during a rename because of the access right comparison
between the source and the destination (see LANDLOCK_ACCESS_FS_REFER).
It may look like this would grant more access on disconnected files and
directories, but the security policies are always enforced for all the
evaluated hierarchies. This new behavior should be less surprising to
users and safer from an access control perspective.
Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() and
fix the related comment.
Because opened files have their access rights stored in the related file
security properties, there is no impact for disconnected or unlinked
files.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Reported-by: Tingmao Wang <m@maowtm.org>
Closes: https://lore.kernel.org/r/027d5190-b37a-40a8-84e9-4ccbc352bcdf@maowtm.org
Closes: https://lore.kernel.org/r/09b24128f86973a6022e6aa8338945fcfb9a33e4.1749925391.git.m@maowtm.org
Fixes: b91c3e4ea7 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Fixes: cb2c7d1a17 ("landlock: Support filesystem access-control")
Link: https://lore.kernel.org/r/b0f46246-f2c5-42ca-93ce-0d629702a987@maowtm.org [1]
Reviewed-by: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98693e0897 ]
Thanks to a device generating an ACS violation during bus reset,
lockdep reported the following circular locking issue:
CPU0: SET_IRQS (MSI/X): holds igate, acquires memory_lock
CPU1: HOT_RESET: holds memory_lock, acquires pci_bus_sem
CPU2: AER: holds pci_bus_sem, acquires igate
This results in a potential 3-way deadlock.
Remove the pci_bus_sem->igate leg of the triangle by using RCU
to peek at the eventfd rather than locking it with igate.
Fixes: 3be3a074cf ("vfio-pci: Don't use device_lock around AER interrupt setup")
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20251124223623.2770706-1-alex@shazbot.org
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5efd56fa1 ]
The rodata=on security measure requires that any code path which does
vmalloc -> set_memory_ro/set_memory_rox must protect the linear map alias
too. Therefore, if such a call fails, we must abort set_memory_* and caller
must take appropriate action; currently we are suppressing the error, and
there is a real chance of such an error arising post commit a166563e7e
("arm64: mm: support large block mapping when rodata=full"). Therefore,
propagate any error to the caller.
Fixes: a166563e7e ("arm64: mm: support large block mapping when rodata=full")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 545d1287e4 ]
Discovered by Atuin - Automated Vulnerability Discovery Engine.
The 'len' variable is calculated as 'min(32, trans->len + 1)',
which includes the 1-byte command header.
When copying data from 'trans->tx_buf' to 'ch341->tx_buf + 1', using 'len'
as the length is incorrect because:
1. It causes an out-of-bounds read from 'trans->tx_buf' (which has size
'trans->len', i.e., 'len - 1' in this context).
2. It can cause an out-of-bounds write to 'ch341->tx_buf' if 'len' is
CH341_PACKET_LENGTH (32). Writing 32 bytes to ch341->tx_buf + 1
overflows the buffer.
Fix this by copying 'len - 1' bytes.
Fixes: 8846739f52 ("spi: add ch341a usb2spi driver")
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Link: https://patch.msgid.link/20251128160630.0f922c45ec6084a46fb57099@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3623e1ae1 ]
devm_pm_runtime_enable() can fail due to memory allocation failures.
The current code ignores its return value and proceeds with
pm_runtime_resume_and_get(), which may operate on incorrectly
initialized runtime PM state.
Check the return value of devm_pm_runtime_enable() and return the
error code if it fails.
Fixes: 6a2277a0eb ("mtd: rawnand: renesas: Use runtime PM instead of the raw clock API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8048168df5 ]
The extra "count >= limit" check in stmmac_rx_zc() is redundant and
has no effect because the value of "count" doesn't change after the
while condition at this point.
However, it can change after "read_again:" label:
while (count < limit) {
...
if (count >= limit)
break;
read_again:
...
/* XSK pool expects RX frame 1:1 mapped to XSK buffer */
if (likely(status & rx_not_ls)) {
xsk_buff_free(buf->xdp);
buf->xdp = NULL;
dirty++;
count++;
goto read_again;
}
...
This patch addresses the same issue previously resolved in stmmac_rx()
by commit fa02de9e75 ("net: stmmac: fix rx budget limit check").
The fix is the same: move the check after the label to ensure that it
bounds the goto loop.
Fixes: bba2556efa ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251126104327.175590-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f73a56f98 ]
Neither sock4 nor sock6 pointers are guaranteed to be non-NULL in
vxlan_xmit_one, e.g. if the iface is brought down. This can lead to the
following NULL dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:vxlan_xmit_one+0xbb3/0x1580
Call Trace:
vxlan_xmit+0x429/0x610
dev_hard_start_xmit+0x55/0xa0
__dev_queue_xmit+0x6d0/0x7f0
ip_finish_output2+0x24b/0x590
ip_output+0x63/0x110
Mentioned commits changed the code path in vxlan_xmit_one and as a side
effect the sock4/6 pointer validity checks in vxlan(6)_get_route were
lost. Fix this by adding back checks.
Since both commits being fixed were released in the same version (v6.7)
and are strongly related, bundle the fixes in a single commit.
Reported-by: Liang Li <liali@redhat.com>
Fixes: 6f19b2c136 ("vxlan: use generic function for tunnel IPv4 route lookup")
Fixes: 2aceb896ee ("vxlan: use generic function for tunnel IPv6 route lookup")
Cc: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251126102627.74223-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e43ebcd51 ]
ptp_clock_settime() assumes every ptp_clock has implemented settime64().
Stub it with -EOPNOTSUPP to prevent a NULL dereference.
The fix is similar to commit 329d050bbe ("gve: Implement settime64
with -EOPNOTSUPP").
Fixes: d734223b2f ("iavf: add initial framework for registering PTP clock")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Tim Hostetler <thostet@google.com>
Link: https://patch.msgid.link/20251126094850.2842557-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69894e5b4c ]
Connlimit expression can be used for all kind of packets and not only
for packets with connection state new. See this ruleset as example:
table ip filter {
chain input {
type filter hook input priority filter; policy accept;
tcp dport 22 ct count over 4 counter
}
}
Currently, if the connection count goes over the limit the counter will
count the packets. When a connection is closed, the connection count
won't decrement as it should because it is only updated for new
connections due to an optimization on __nf_conncount_add() that prevents
updating the list if the connection is duplicated.
To solve this problem, check whether the connection was skipped and if
so, update the list. Adjust count_tree() too so the same fix is applied
for xt_connlimit.
Fixes: 976afca1ce ("netfilter: nf_conncount: Early exit in nf_conncount_lookup() and cleanup")
Closes: https://lore.kernel.org/netfilter/trinity-85c72a88-d762-46c3-be97-36f10e5d9796-1761173693813@3c-app-mailcom-bs12/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be102eb6a0 ]
When using nf_conncount infrastructure for non-confirmed connections a
duplicated track is possible due to an optimization introduced since
commit d265929930 ("netfilter: nf_conncount: reduce unnecessary GC").
In order to fix this introduce a new conncount API that receives
directly an sk_buff struct. It fetches the tuple and zone and the
corresponding ct from it. It comes with both existing conncount variants
nf_conncount_count_skb() and nf_conncount_add_skb(). In addition remove
the old API and adjust all the users to use the new one.
This way, for each sk_buff struct it is possible to check if there is a
ct present and already confirmed. If so, skip the add operation.
Fixes: d265929930 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 634f3853cc ]
Add a sanity check to skip path discovery if the maximum number of
encapsulation is reached. While at it, check for underflow too.
Fixes: 26267bf9bb ("netfilter: flowtable: bridge vlan hardware offload and switchdev")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb3acdebf ]
Commit 97523a4edb ("kernel/resource: remove first_lvl / siblings_only
logic") removed an optimization introduced by commit 756398750e
("resource: avoid unnecessary lookups in find_next_iomem_res()"). That
was not called out in the message of the first commit explicitly so it's
not entirely clear whether removing the optimization happened
inadvertently or not.
As the original commit message of the optimization explains there is no
point considering the children of a subtree in find_next_iomem_res() if
the top level range does not match.
Reinstating the optimization results in performance improvements in
systems where /proc/iomem is ~5k lines long. Calling mmap() on /dev/mem
in such platforms takes 700-1500μs without the optimisation and 10-50μs
with the optimisation.
Note that even though commit 97523a4edb removed the 'sibling_only'
parameter from next_resource(), newer kernels have basically reinstated it
under the name 'skip_children'.
Link: https://lore.kernel.org/all/20251124165349.3377826-1-ilstam@amazon.com/T/#u
Fixes: 97523a4edb ("kernel/resource: remove first_lvl / siblings_only logic")
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce48af13e6 ]
The base address of JPEG decoder core 1 should start at 0x10000, and
have a size of 0x10000, i.e. it is right after core 0.
Instead the core has the same base address as core 0, and with a crazy
large size. This looks like a mixup of address and size cells when the
ranges were converted.
This causes the kernel to fail to register the second core due to sysfs
name conflicts:
sysfs: cannot create duplicate filename '/devices/platform/soc/soc:jpeg-decoder@1a040000/1a040000.jpgdec'
Fix up the address range.
Fixes: a9eac43d03 ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg enc/decoder nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20251127100044.612825-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cc15a10c3 ]
regulator_supply_alias_list was accessed without any locking in
regulator_supply_alias(), regulator_register_supply_alias(), and
regulator_unregister_supply_alias(). Concurrent registration,
unregistration and lookups can race, leading to:
1 use-after-free if an alias entry is removed while being read,
2 duplicate entries when two threads register the same alias,
3 inconsistent alias mappings observed by consumers.
Protect all traversals, insertions and deletions on
regulator_supply_alias_list with the existing regulator_list_mutex.
Fixes: a06ccd9c37 ("regulator: core: Add ability to create a lookup alias for supply")
Signed-off-by: sparkhuang <huangshaobo3@xiaomi.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127025716.5440-1-huangshaobo3@xiaomi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ff147fdfa ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f77cbb9a3e ("ARM: dts: exynos: Add bcm4334 device node to Trats2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-5-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97cc9c346b ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: a19f6efc01 ("ARM: dts: exynos: Enable WLAN support for the Trats board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-4-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 863d69923b ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-3-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97aee67e24 ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f1b0ffaa68 ("ARM: dts: exynos: Enable WLAN support for the UniversalC210 board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2224ea67c7 ]
Commit 78b72897a5 ("soc: samsung: exynos-pmu: Enable CPU Idle for
gs101") added system wide suspend/resume callbacks to Exynos PMU driver,
but some items used by these callbacks are initialized only on
GS101-compatible boards. Move that initialization to exynos_pmu_probe()
to avoid potential lockdep warnings like below observed during system
suspend/resume cycle:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 UID: 0 PID: 2134 Comm: rtcwake Not tainted 6.18.0-rc7-next-20251126-00039-g1d656a1af243 #11794 PREEMPT
Hardware name: Samsung Exynos (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from register_lock_class+0x970/0x988
register_lock_class from __lock_acquire+0xc8/0x29ec
__lock_acquire from lock_acquire+0x134/0x39c
lock_acquire from _raw_spin_lock+0x38/0x48
_raw_spin_lock from exynos_cpupm_suspend_noirq+0x18/0x34
exynos_cpupm_suspend_noirq from dpm_run_callback+0x98/0x2b8
dpm_run_callback from device_suspend_noirq+0x8c/0x310
Fixes: 78b72897a5 ("soc: samsung: exynos-pmu: Enable CPU Idle for gs101")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126110038.3326768-1-m.szyprowski@samsung.com
[krzk: include calltrace into commit msg]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061795b345 ]
Airoha EN7523 specific bug
--------------------------
We found that some serial console may pull TX line to GROUND during board
boot time. Airoha uses TX line as one of its bootstrap pins. On the EN7523
SoC this may lead to booting in RESERVED boot mode.
It was found that some flashes operates incorrectly in RESERVED mode.
Micron and Skyhigh flashes are definitely affected by the issue,
Winbond flashes are not affected.
Details:
--------
DMA reading of odd pages on affected flashes operates incorrectly. Page
reading offset (start of the page) on hardware level is replaced by 0x10.
Thus results in incorrect data reading. As result OS loading becomes
impossible.
Usage of UBI make things even worse. On attaching, UBI will detects
corruptions (because of wrong reading of odd pages) and will try to
recover. For recovering UBI will erase and write 'damaged' blocks with
a valid information. This will destroy all UBI data.
Non-DMA reading is OK.
This patch detects booting in reserved mode, turn off DMA and print big
fat warning.
It's worth noting that the boot configuration is preserved across reboots.
Therefore, to boot normally, you should do the following:
- disconnect the serial console from the board,
- power cycle the board.
Fixes: a403997c12 ("spi: airoha: add SPI-NAND Flash controller driver")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20251125234047.1101985-2-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86a5b621be ]
Do not leave any resources hanging on the DSP side if
applying user settings fails.
Fixes: 768a3a3b32 ("ASoC: Intel: catpt: Optimize applying user settings")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9513f25056 ]
virtio pci uses word to mean "16 bits". mmio uses it to mean
"32 bits".
To avoid confusion, let's avoid the term in core virtio
altogether. Just say U64 to mean "64 bit".
Fixes: e7d4c1c5a5 ("virtio: introduce extended features")
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-ID: <ad53b7b6be87fc524f45abaeca0bb05fb3633397.1764225384.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 731ca4a4cc ]
Use %pe instead of %ps when printing ERR_PTR() values. %ps is intended
for string pointers, while %pe correctly prints symbolic error names
for error pointers returned via ERR_PTR().
This shows the returned error value more clearly.
Fixes: 67f27b8b3a ("pds_vdpa: subscribe to the pds_core events")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251018174705.1511982-1-alok.a.tiwari@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3f64c2eaf ]
If we fail to attach to a cgroup we are leaking the id. This adds
a new goto to free the id.
Fixes: 7d9896e9f6 ("vhost: Reintroduce kthread API and add mode selection")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251101194358.13605-1-michael.christie@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0ea2e9109 ]
When query_virtqueues() fails, the error log prints the variable err
instead of cmd->err. Since err may still be zero at this point, the
log message can misleadingly report a success value 0 even though the
command actually failed.
Even worse, once err is set to the first failure, subsequent logs
print that same stale value. This makes the error reporting appear
one step behind the actual failing queue index, which is confusing
and misleading.
Fix the log to report cmd->err, which reflects the real failure code
returned by the firmware.
Fixes: 1fcdf43ea6 ("vdpa/mlx5: Use async API for vq query command")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20250929134258.80956-1-alok.a.tiwari@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb55fc994 ]
@free will free the map handle not sync it. Fix the doc to match.
Fixes: bee8c7c24b ("virtio: introduce map ops in virtio core")
Message-Id: <f6ff1c7aff8401900bf362007d7fb52dfdb6a15b.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43236d8bba ]
Rewrite the comment for better grammar and clarity.
Fixes: 75a0a52be3 ("virtio: introduce an API to set affinity for a virtqueue")
Message-Id: <e317e91bd43b070e5eaec0ebbe60c5749d02e2dd.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e88a5a97d ]
Remove colons after "Returns" in virtio_map_ops function
documentation - both to avoid triggering an htmldoc warning
and for consistency with virtio_config_ops.
This affects map_page, alloc, need_sync, and max_mapping_size.
Fixes: bee8c7c24b ("virtio: introduce map ops in virtio core")
Message-Id: <c262893fa21f4b1265147ef864574a9bd173348f.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
