This initial device tree describes CPU, interrupts and UART on the chip
and is able to boot into basic kernel with only UART. Cache information
is omitted for now as there is no precise documentation. Support for
other features will be added later.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20240829092705.6241-4-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add board file for the rk3576 based ArmSoM Sige5 board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things required to successfully boot Linux from SD card and
connect via UART or Ethernet.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20240903152308.13565-10-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This device tree contains all devices necessary for booting from network
or SD Card.
It supports CPU, CRU, PM domains, dma, interrupts, timers, UART, I2C
and SDHCI (everything necessary to boot Linux on this system on chip)
as well as Ethernet, SPI, GPU and RTC.
Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Tested-by: Liang Chen <cl@rock-chips.com>
Link: https://lore.kernel.org/r/20240903152308.13565-9-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk356x DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-6-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk3399 DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-5-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk3368 DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk3328 DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-3-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the px30 DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add clocks property to rk3328 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20240930215001.1999212-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The cru node references undocumented compatibles of "rockchip,cru" and also
marks it as syscon.
A general rockchip,cru is way too generic to ever be used anywhere, so
needs to go away, similarly the cru should not be written to from other
places, instead regular clock routines should be used.
Both mainline Linux as well as the vendor-kernel up to their 6.1 branch
only reference the cru via the normal assigned-clocks, clocks and resets
properties and do not get a syscon from the node.
Similarly, there is no syscon access by compatible both in mainline
nor the vendor-kernel up to their 6.1 branch, through either the
rockchip,rk3328-cru nor rockchip,cru compatibles.
So these two really are unused in all publically visible places.
Sidenote: the vendor-kernel does pretty crazy stuff in the camera interface
and tdm driver, where they map the cru separately and set clock muxes and
gates directly. This should of course never reach mainline anyway.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
[update commit message, to explain the unused compatibles]
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240930215001.1999212-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Turing RK1 contains 3 different USBs:
- USB0: USB 2.0, OTG
- USB1: USB 3.0, host
- USB2: USB 2.0, host
This patch activates the necessary DT nodes to enable all 3 buses.
Future work will be needed on USB0: it is not USB3-capable, so the USB0
controller needs to be told that there is no USB3 port. Per Jonas's
suggestion, the USBDP0 node is given a `rockchip,dp-lane-mux` property
that tells the USBDP driver that USBDP0 is not involved in USB so that
it can make the necessary configuration changes in hardware.
Technically, this is USB *controller* configuration, not *PHY*
configuration, so the underlying code may be moved in the future to the
USB controller driver instead, freeing up the (software) dependency on
USBDP0. A TODO comment is added to explain this.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240930210652.1232951-1-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Powkiddy RGB20SX is a portable game console extremely similar to
the existing RGB30 console. The key differences from the RGB30 are
as follows:
- Realtek RTW8723DS WiFi and Bluetooth.
- UART pads for debug console (UART2).
- A function button (ADC channel 0).
- A much larger battery (5000 mAh).
Otherwise, the device is identical to the RGB30, including the
hard-coded value on ADC channel 1 used to identify the device at
runtime.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20241001154016.87386-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is a PWRBTN# input pin exposed on a Q7 connector. The pin
is routed to a GPIO0_A1 through a diode. Q7 specification describes
the PWRBTN# pin as a Power Button signal.
Configure the pin as KEY_POWER, so it can function as power button and
trigger device shutdown.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20241001134741.210979-1-dse@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Khadas Edge2 uses the PCI-e Ampak AP6275P 2T2R Wi-Fi 6 module. The
pcie@0 node can be used as Bridge1, so the wifi@0 node is used as a
device under the Bridge1.
Co-developed-by: Muhammed Efe Cetin <efectn@protonmail.com>
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Link: https://lore.kernel.org/r/20240910-dts-v14-1-82b39bd91257@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the Mali GPU in the Turing RK1.
This patch also sets the external GPU voltage regulator in the RK806-1
to "always-on" because it is necessary for this regulator to be active
when enabling the GPU power domain or the kernel will fail with:
rockchip-pm-domain fd8d8000.power-management:power-controller: \
failed to set domain 'gpu', val=0
rockchip-pm-domain fd8d8000.power-management:power-controller: \
failed to get ack on domain 'gpu', val=0x1bffff
...followed by a panic when it attempts to access unavailable QoS
registers.
Since there is currently no `domain-supply` or similar to express this
dependency, the only way to ensure that the regulator is never off when
the GPU power domain is brought up is to ensure that the regulator is
never off.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20240912025034.180233-6-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds thermal trip points and cooling maps to the Turing RK1
in order to enable automatic control of the external PWM fan. The fan is
not active below 45C, as the heatsink alone can generally keep the chip
in this temperature region at idle load. This cooling profile errs on
the side of quietness, since the RK1 is commonly deployed in a Turing
Pi 2 clusterboard alongside three others, with additional cooling
provided at the chassis level.
Helped-by: soxrok2212 <soxrok2212@gmail.com>
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20240912025034.180233-4-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The PCIe 3 PHY in the RK3588 requires a running external reference clock
for both external bus transfers and some internal PIPE operations.
Without this clock, the PCIe3 controller fails to initialize and ignores
DBI transactions indefinitely, which stalls the Linux boot process.
On most RK3588 boards, this is evidently not an issue. But on some "SoM"
designs (Turing RK1, Mixtile Core 3588E, ArmSoM AIM7, to name a few),
this clock is only provided when the CLKREQ# signal is asserted.
The PCIe 3 PHY generates the CLKREQ# signal when it knows it needs the
reference clock for proper operation. Unfortunately, the current DT for
Turing RK1 does not mux out these low-speed signals, resulting in broken
boots and potentially other issues.
This patch, following the previous one that split up the PCIe pinctrls,
resolves this problem for Turing RK1 by explicitly muxing all of the
signals needed for PCIe 2 and 3 support.
Cc: Jonathan Bennett <jbennett@incomsystems.biz>
Fixes: 2806a69f3f ("arm64: dts: rockchip: Add Turing RK1 SoM support")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20240912025034.180233-3-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
These pinctrls manage the low-speed PCIe signals:
- CLKREQ#: An output on the RK3588 (both RC or EP modes), used to
request that external clock-generation circuitry provide a clock.
- PERST#: An input on the RK3588 in EP mode, used to detect a reset
signal from the RC. In RC mode, the hardware does not use this signal:
Linux itself generates it by putting the pin in GPIO mode.
- WAKE#: In EP mode, this is an output; in RC mode, this is an input.
Each of these signals serves a distinct purpose, and more importantly,
PERST# should not be muxed when the RK3588 is in the RC role. Bundling
them together in pinctrl groups prevents proper use: indeed, almost none
of the current board-specific .dts files make any use of them.
(Exception: Rock 5A recently had a patch land that misuses _pins; this
patch corrects that.)
However, on some RK3588 boards, the PCIe 3 controller will indefinitely
stall the boot if CLKREQ# is not muxed (details in the next patch).
This patch unbundles the signals to allow them to be used.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20240912025034.180233-2-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
W3 is the carrier board for LM7 System on Module.
W3 features:
- 1x 2.5GbE Realtek RTL8125 Ethernet
- 2x HDMI Type A out
- 1x HDMI Type A in
- 1x USB 3.1 Type C
- 2x USB 2.0 Type A
- 2x USB 3.0 Type A
- 1x PCIE 2.0 M.2 E Key (1 lane)
- 1x PCIE 3.0 PCIe (4 lanes)
- 1x TF scard slot
- 1x MIPI CSI
- 1x MIPI DSI
- 1x ES8316 audio jack
- 1x FAN connector
- 1x RTC
- 40-pin expansion header
Add support for ArmSoM LM7 board.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20240918165008.169917-4-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
LM7 is an System on Module made by ArmSoM based on Rockchip RK3588.
This SoM is used by W3 Board.
LM7 features:
- Rockchip RK3588
- LPDDR4x 4/8/16/32 GB
- eMMC 16/32/64/128 GB
Add support for ArmSoM LM7 SoM.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20240918165008.169917-3-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
LM7 is an System on Module made by ArmSoM based on Rockchip RK3588.
This SoM is used by W3 Board.
LM7 features:
- Rockchip RK3588
- LPDDR4x 4/8/16/32 GB
- eMMC 16/32/64/128 GB
Add devicetree binding for ArmSoM LM7 SoM.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240918165008.169917-2-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This links the PWM fan on Orange Pi 5+ as an active cooling device
managed automatically by the thermal subsystem, with a target SoC
temperature of 65C and a minimum-spin interval from 55C to 65C to
ensure airflow when the system gets warm.
This is pretty much the same as '4a152231b0 ("arm64: dts: rockchip:
enable automatic fan control on Rock 5B")', except for the Orange Pi
5+ board.
Signed-off-by: Florian Klink <flokli@flokli.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240922145538.256235-2-flokli@flokli.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Ringneck v1.4 can contain (placement option) an on-board ATtiny
microcontroller instead of an STM32. In normal operation, this
is transparent to the software, as both microcontrollers emulate
the same ICs (amc6821 and isl1208).
For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
we are running on an older Ringneck revision, SWITCH_REG1 is not connected
and has no effect.
Add attiny-updi-gate-regulator so userspace can control it via sysfs
(needs CONFIG_REGULATOR_USERSPACE_CONSUMER):
echo enabled > /sys/devices/platform/attiny-updi-gate-regulator/state
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20240926132028.21910-1-jakob.unterwurzacher@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
imx: use devie name instead of genereic imx_mu_chan as interrupt name
qcom: enable sa8255p and qcs8300 ipc controllers
bcm2835: Fix timeout during suspend mode
mailbox: convert to use use of_property_match_string
mediatek: enable mt8188
spreadtrum: use devm_clk_get_enabled helpers
rockchip: fix device-id typo
-----BEGIN PGP SIGNATURE-----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=nCRH
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
I2C host fixes for v6.12-rc1 (from Andi)
The DesignWare driver now has the correct ENABLE-ABORT sequence,
ensuring ABORT can always be sent when needed.
In the SynQuacer controller we now check for PCLK as an optional
clock, allowing ACPI to directly provide the clock rate.
The recent KEBA driver required a dependency fix in Kconfig.
The XIIC driver now has a corrected power suspend sequence.
-----BEGIN PGP SIGNATURE-----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=CZPe
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
- handle chained SGLs in the new tracing code (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=zjTS
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
These are mostly minor updates. There are two drivers (lpfc and
mpi3mr) which missed the initial pull and a core change to retry a
start/stop unit which affect suspend/resume.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZvh4QiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQajAQDx561I
cgbPZjZkSOYp+qJowaphyySZ1SS8pfMlVAIiXQEAs4SqhIN8e9QWpgI0bA7X7xtB
UiOUsIHPHM+BFU6kbJQ=
=qjsp
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
