The kunpeng_hccs driver depends on the Platform Communication Channel
Driver. If the PCC driver is not enabled, this driver will be failed
to probe. And since the PCC driver depends on the MAILBOX, replace
the MAILBOX dependency with the PCC.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Correct the name of a struct in kernel-doc to match the actual function
name.
Add kernel-doc comments for 2 reserved fields to match comments for other
reserved fields.
Correct the kernel-doc comments for a nested struct to eliminate kernel-doc
warnings for them.
Warnings fixed here are:
scsi_bsg_mpi3mr.h:419: warning: expecting prototype for struct mpi3mr_bsg_buf_entry_list. Prototype was for struct mpi3mr_buf_entry_list instead
scsi_bsg_mpi3mr.h:435: warning: Function parameter or struct member 'rsvd2' not described in 'mpi3mr_bsg_mptcmd'
scsi_bsg_mpi3mr.h:456: warning: Function parameter or struct member 'rsvd3' not described in 'mpi3mr_bsg_packet'
scsi_bsg_mpi3mr.h:456: warning: Excess struct member 'drvrcmd' description in 'mpi3mr_bsg_packet'
scsi_bsg_mpi3mr.h:456: warning: Excess struct member 'mptcmd' description in 'mpi3mr_bsg_packet'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240424055322.1400-1-rdunlap@infradead.org
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: mpi3mr-linuxdrv.pdl@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The hccs_get_all_port_attr() is used to obtain the attribute of all the
ports on a specified DIE from the firmware. However this interface doesn't
ensure whether the firmware reports the complete attribute of all the ports
or not. So this patch adds the check for this.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
In struct utp_upiu_query_v4_0, add description for @osf3 and mark the
@reserved field as private so that no description is needed for it.
In struct utp_upiu_cmd, use the correct struct member name to eliminate a
kernel-doc warning.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240424055316.1384-1-rdunlap@infradead.org
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Complete the kernel-doc notation for enum fc_lport_state. This fixes 7
kernel-doc warnings.
- In struct fc_rport_priv, change 'event_callback' to 'lld_event_callback'
to match the struct member name.
- In struct fc_fcp_pkt, add a description for 'timer_delay' to eliminate
one kernel-doc warning.
- Add return value notation for 3 functions. This fixes 3 kernel-doc
warnings.
There are still 12 warnings for struct members not described in struct
fc_rport_priv and struct fc_lport, e.g:
libfc.h:218: warning: Function parameter or struct member 'event' not described in 'fc_rport_priv'
libfc.h:760: warning: Function parameter or struct member 'vlan' not described in 'fc_lport'
Warnings that are fixed in this patch:
libfc.h:75: warning: Enum value 'LPORT_ST_RNN_ID' not described in enum 'fc_lport_state'
libfc.h:75: warning: Enum value 'LPORT_ST_RSNN_NN' not described in enum 'fc_lport_state'
libfc.h:75: warning: Enum value 'LPORT_ST_RSPN_ID' not described in enum 'fc_lport_state'
libfc.h:75: warning: Enum value 'LPORT_ST_RPA' not described in enum 'fc_lport_state'
libfc.h:75: warning: Enum value 'LPORT_ST_DHBA' not described in enum 'fc_lport_state'
libfc.h:75: warning: Enum value 'LPORT_ST_DPRT' not described in enum 'fc_lport_state'
libfc.h:75: warning: Excess enum value 'LPORT_ST_RPN_ID' description in 'fc_lport_state'
libfc.h:218: warning: Excess struct member 'event_callback' description in 'fc_rport_priv'
libfc.h:793: warning: No description found for return value of 'fc_lport_test_ready'
libfc.h:835: warning: No description found for return value of 'fc_lport_init_stats'
libfc.h:856: warning: No description found for return value of 'lport_priv'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240424050038.31403-1-rdunlap@infradead.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable 'i' is being assigned a value that is never read, the
following code path via the label ofld_err never refers to the
variable. The assignment is redundant and can be removed.
Cleans up clang scan warning:
drivers/scsi/bnx2fc/bnx2fc_tgt.c:132:5: warning: Value stored to 'i'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240415104311.484890-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just rescanning a partition causes a print similar to the following to
appear:
[ 1.484964] sd 0:0:0:0: [sda] permanent stream count = 5
This is bothersome, so only print this message for an update.
Fixes: 4f53138fff ("scsi: sd: Translate data lifetime information")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240412094407.496251-1-john.g.garry@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the calculation of the utrd pointer. This patch addresses the following
Coverity complaint:
CID 1538170: (#1 of 1): Extra sizeof expression (SIZEOF_MISMATCH)
suspicious_pointer_arithmetic: Adding sq_head_slot * 32UL /* sizeof (struct
utp_transfer_req_desc) */ to pointer hwq->sqe_base_addr of type struct
utp_transfer_req_desc * is suspicious because adding an integral value to
this pointer automatically scales that value by the size, 32 bytes, of the
pointed-to type, struct utp_transfer_req_desc. Most likely, the
multiplication by sizeof (struct utp_transfer_req_desc) in this expression
is extraneous and should be eliminated.
Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <quic_cang@quicinc.com>
Fixes: 8d72903489 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240410000751.1047758-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stop calling smp_processor_id() from preemptible code in
qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel.
[ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646
[ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf]
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Link: https://lore.kernel.org/r/20240403150155.412954-1-jmeneghi@redhat.com
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Utilize the __free() cleanup handler within the hdmi_get_phy_io function
to automatically release the device node when it is out of scope.
This eliminates the manual invocation of of_node_put(), reducing the
potential for memory leaks.
The modification requires initializing the device node at the beginning
of the function, ensuring that the automatic cleanup is safely executed.
Consequently, this removes the need for error cleanup paths that utilize
goto statements and the jump to out is no longer necessary.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Shivani Gupta <shivani07g@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
nf_conntrack_udp_timeout sysctl only exist once conntrack module is loaded,
if this test runs standalone on a modular kernel sysctl setting fails,
this can result in test failure as udp conntrack entries expire too fast.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240422102546.2494-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal
of ovs_ct_limit_exit, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 11efd5cb04 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
selftest: netfilter: additional cleanups
This is the last planned series of the netfilter-selftest-move.
It contains cleanups (and speedups) and a few small updates to
scripts to improve error/skip reporting.
I intend to route future changes, if any, via nf(-next) trees
now that the 'massive code churn' phase is over.
====================
Link: https://lore.kernel.org/r/20240423130604.7013-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use socat, like most of the other scripts already do. This also makes
the script complete slightly faster (3s -> 1s).
iperf3 establishes two connections (1 control connection, and 1+x
depending on test), so adjust expected counter values as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-8-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_netfilter: If we can't add the needed initial nftables ruleset skip the
test, kernel doesn't support a required feature.
rpath: run a subset of the tests if possible, but make sure we return
the skip return value so they are marked appropriately by the kselftest
framework.
nft_audit.sh: provide version information when skipping, this should
help catching kernel problem (feature not available in kernel) vs.
userspace issue (parser doesn't support keyword).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-7-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
no functional changes intended except that test will now SKIP in
case kernel lacks bridge support and initial rule load failure provides
nft version information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-6-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the test runs much faster, also re-run it with random MTU sizes
for the different link legs. flowtable should pass ip fragments, if
any, up to the normal forwarding path.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-5-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tests fail on my workstation with netcat 110, instead of debugging+more
workarounds just remove this.
Tests will fall back to bash or socat.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use busywait helper instead of unconditional sleep, reduces run time
from 6m to 2:30 on my system.
The busywait helper calls the function passed to it as argument; disable
the shellcheck test for unreachable code, it generates many (false)
warnings here.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_get_by_name will provide a reference on the netdev. So ensure that
the reference of netdev is released after completed.
Fixes: 2540088b83 ("net: openvswitch: Check vport netdev name")
Signed-off-by: Jun Gu <jun.gu@easystack.cn>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20240423073751.52706-1-jun.gu@easystack.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces. A good alternative is strscpy() as it guarantees
NUL-termination on the destination buffer.
In crypto.c:
We expect cipher_name to be NUL-terminated based on its use with
the C-string format specifier %s and with other string apis like
strlen():
| printk(KERN_ERR "Error attempting to initialize key TFM "
| "cipher with name = [%s]; rc = [%d]\n",
| tmp_tfm->cipher_name, rc);
and
| int cipher_name_len = strlen(cipher_name);
In main.c:
We can remove the manual NUL-byte assignments as well as the pointers to
destinations (which I assume only existed to trim down on line length?)
in favor of directly using the destination buffer which allows the
compiler to get size information -- enabling the usage of the new
2-argument strscpy().
Note that this patch relies on the _new_ 2-argument versions of
strscpy() and strscpy_pad() introduced in Commit e6584c3964 ("string:
Allow 2-argument strscpy()").
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240321-strncpy-fs-ecryptfs-crypto-c-v1-1-d78b74c214ac@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
strncpy() is deprecated with NUL-terminated destination strings [1].
The copy_name() method does a lot of manual buffer manipulation to
eventually arrive with its desired string. If we don't know the
namespace this attr has or belongs to we want to prepend "osx." to our
final string. Following this, we're copying xattr_name and doing a
bizarre manual NUL-byte assignment with a memset where n=1.
Really, we can use some more obvious string APIs to acomplish this,
improving readability and security. Following the same control flow as
before: if we don't know the namespace let's use scnprintf() to form our
prefix + xattr_name pairing (while NUL-terminating too!). Otherwise, use
strscpy() to return the number of bytes copied into our buffer.
Additionally, for non-empty strings, include the NUL-byte in the length
-- matching the behavior of the previous implementation.
Note that strscpy() _can_ return -E2BIG but this is already handled by
all callsites:
In both hfsplus_listxattr_finder_info() and hfsplus_listxattr(), ret is
already type ssize_t so we can change the return type of copy_name() to
match (understanding that scnprintf()'s return type is different yet
fully representable by ssize_t). Furthermore, listxattr() in fs/xattr.c
is well-equipped to handle a potential -E2BIG return result from
vfs_listxattr():
| ssize_t error;
...
| error = vfs_listxattr(d, klist, size);
| if (error > 0) {
| if (size && copy_to_user(list, klist, error))
| error = -EFAULT;
| } else if (error == -ERANGE && size >= XATTR_LIST_MAX) {
| /* The file system tried to returned a list bigger
| than XATTR_LIST_MAX bytes. Not possible. */
| error = -E2BIG;
| }
... the error can potentially already be -E2BIG, skipping this else-if
and ending up at the same state as other errors.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240401-strncpy-fs-hfsplus-xattr-c-v2-1-6e089999355e@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
Our goal here is to get @namebuf populated with @name's contents but
surrounded with quotes. There is some careful handling done to ensure we
properly truncate @name so that we have room for a literal quote as well
as a NUL-term. All this careful handling can be done with scnprintf
using the dynamic string width specifier %.*s which allows us to pass in
the max size for a source string. Doing this, we can put literal quotes
in our format specifier and ensure @name is truncated to fit inbetween
these quotes (-3 is from 2 quotes + 1 NUL-byte).
All in all, we get to remove a deprecated use of strncpy and clean up
this code nicely!
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240328-strncpy-fs-reiserfs-item_ops-c-v1-1-2dab6d22a996@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We can see that client->name should be NUL-terminated based on its usage
with a %s C-string format specifier.
| client->thread = kthread_run(ioreq_task, client, "VM%u-%s",
| client->vm->vmid, client->name);
NUL-padding is not required as client is already zero-allocated:
| client = kzalloc(sizeof(*client), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Note that this patch relies on the _new_ 2-argument version of strscpy()
introduced in Commit e6584c3964 ("string: Allow 2-argument
strscpy()").
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240320-strncpy-drivers-virt-acrn-ioreq-c-v1-1-db6996770341@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Vadim Fedorenko says:
====================
This series introduces crypto kfuncs to make BPF programs able to
utilize kernel crypto subsystem. Crypto operations made pluggable to
avoid extensive growth of kernel when it's not needed. Only skcipher is
added within this series, but it can be easily extended to other types
of operations. No hardware offload supported as it needs sleepable
context which is not available for TX or XDP programs. At the same time
crypto context initialization kfunc can only run in sleepable context,
that's why it should be run separately and store the result in the map.
Selftests show the common way to implement crypto actions in BPF
programs. Benchmark is also added to have a baseline.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add simple tc hook selftests to show the way to work with new crypto
BPF API. Some tricky dynptr initialization is used to provide empty iv
dynptr. Simple AES-ECB algo is used to demonstrate encryption and
decryption of fixed size buffers.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240422225024.2847039-4-vadfed@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add crypto API support to BPF to be able to decrypt or encrypt packets
in TC/XDP BPF programs. Special care should be taken for initialization
part of crypto algo because crypto alloc) doesn't work with preemtion
disabled, it can be run only in sleepable BPF program. Also async crypto
is not supported because of the very same issue - TC/XDP BPF programs
are not sleepable.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240422225024.2847039-2-vadfed@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The commit d56b63cf0c ("bpf: add support for bpf_wq user type")
changes the fields support number to 11, just sync the comment.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240424054526.8031-1-haiyue.wang@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Althought FDPIC linux kernel provides /proc/<pid>/auxv files they are
empty because there's no code that initializes mm->saved_auxv in the
FDPIC ELF loader.
Synchronize FDPIC ELF aux vector setup with ELF. Replace entry-by-entry
aux vector copying to userspace with initialization of mm->saved_auxv
first and then copying it to userspace as a whole.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20240322195418.2160164-1-jcmvbkbc@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
When generating Runtime Calls, Clang doesn't respect the -mregparm=3
option used on i386. Hopefully this will be fixed correctly in Clang 19:
https://github.com/llvm/llvm-project/pull/89707
but we need to fix this for earlier Clang versions today. Force the
calling convention to use non-register arguments.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://github.com/KSPP/linux/issues/350
Link: https://lore.kernel.org/r/20240424224026.it.216-kees@kernel.org
Acked-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
It was observed in the wild that pairs of consecutive packets would leave
the IPVS with the same wrong checksum, and the issue only went away when
disabling GSO.
IPVS needs to avoid computing the SCTP checksum when using GSO.
Fixes: 90017accff ("sctp: Add GSO support")
Co-developed-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: Ismael Luceno <iluceno@suse.de>
Tested-by: Andreas Taschner <andreas.taschner@suse.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
