Since all of the governors in the tree have been switched over to using
the new callbacks, either .trip_crossed() or .manage(), the .throttle()
governor callback is not used any more, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notifying user space about trip points that have not been crossed is
not particularly useful, so modify the User Space governor to use the
.trip_crossed() callback, which is only invoked for trips that have been
crossed, instead of .throttle() that is invoked for all trips in a
thermal zone every time the zone is updated.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add myself as a maintainer/supporter for libeth and libie. Let they have
separate entries from the Intel ethernet code as it's a bit different
case and all patches will go through me rather than Tony.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that the IAVF driver simply uses dev_alloc_page() + free_page() with
no custom recycling logics, it can easily be switched to using Page
Pool / libeth API instead.
This allows to removing the whole dancing around headroom, HW buffer
size, and page order. All DMA-for-device is now done in the PP core,
for-CPU -- in the libeth helper.
Use skb_mark_for_recycle() to bring back the recycling and restore the
performance. Speaking of performance: on par with the baseline and
faster with the PP optimization series applied. But the memory usage for
1500b MTU is now almost 2x lower (x86_64) thanks to allocating a page
every second descriptor.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Before replacing the Rx buffer management with libie, clean up
&iavf_ring a bit.
There are several fields not used anywhere in the code -- simply remove
them. Move ::tail up to remove a hole. Replace ::arm_wb boolean with
1-bit flag in ::flags to free 1 more byte. Finally, move ::prev_pkt_ctr
out of &iavf_tx_queue_stats -- it doesn't belong there (used for Tx
stall detection). Place it next to the stats on the ring itself to fill
the 4-byte slot.
The result: no holes and all the hot fields fit into the first 64-byte
cacheline.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a couple intuitive helpers to hide Rx buffer implementation details
in the library and not multiplicate it between drivers. The settings are
sorta optimized for 100G+ NICs, but nothing really HW-specific here.
Use the new page_pool_dev_alloc() to dynamically switch between
split-page and full-page modes depending on MTU, page size, required
headroom etc. For example, on x86_64 with the default driver settings
each page is shared between 2 buffers. Turning on XDP (not in this
series) -> increasing headroom requirement pushes truesize out of 2048
boundary, leading to that each buffer starts getting a full page.
The "ceiling" limit is %PAGE_SIZE, as only order-0 pages are used to
avoid compound overhead. For the above architecture, this means maximum
linear frame size of 3712 w/o XDP.
Not that &libeth_buf_queue is not a complete queue/ring structure for
now, rather a shim, but eventually the libeth-enabled drivers will move
to it, with iavf being the first one.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Each driver is responsible for syncing buffers written by HW for CPU
before accessing them. Almost each PP-enabled driver uses the same
pattern, which could be shorthanded into a static inline to make driver
code a little bit more compact.
Introduce a simple helper which performs DMA synchronization for the
size passed from the driver. It can be used even when the pool doesn't
manage DMA-syncs-for-device, just make sure the page has a correct DMA
address set via page_pool_set_dma_addr().
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There are several functions taking pointers to data they don't modify.
This includes statistics fetching, page and page_pool parameters, etc.
Constify the pointers, so that call sites will be able to pass const
pointers as well.
No functional changes, no visible changes in functions sizes.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add NUMA-aware counterparts for kvmalloc_array() and kvcalloc() to be
able to flexibly allocate arrays for a particular node.
Rewrite kvmalloc_array() to kvmalloc_array_node(NUMA_NO_NODE) call.
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As an intermediate step, remove all page splitting/recycling code. Just
always allocate a new page and don't touch its refcount, so that it gets
freed by the core stack later.
Same for the "in-place" recycling, i.e. when an unused buffer gets
assigned to a first needs-refilling descriptor. In some cases, this
was leading to moving up to 63 &iavf_rx_buf structures around the ring
on a per-field basis -- not something wanted on hotpath.
The change allows to greatly simplify certain parts of the code:
Function: add/remove: 0/2 grow/shrink: 0/7 up/down: 0/-744 (-744)
Although the array of &iavf_rx_buf is barely used now and could be
replaced with just page pointer array, don't touch it now to not
complicate replacing it with libie Rx buffer struct later on.
No surprise perf loses up to 30% here, but that regression will
go away once PP lands.
Note that iavf_rx_pg_*() definitions are left to reduce diffstat.
They will be removed with the conversion to Page Pool.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ever since build_skb() became stable, the old way with allocating an skb
for storing the headers separately, which will be then copied manually,
was slower, less flexible, and thus obsolete.
* It had higher pressure on MM since it actually allocates new pages,
which then get split and refcount-biased (NAPI page cache);
* It implies memcpy() of packet headers (40+ bytes per each frame);
* the actual header length was calculated via eth_get_headlen(), which
invokes Flow Dissector and thus wastes a bunch of CPU cycles;
* XDP makes it even more weird since it requires headroom for long and
also tailroom for some time (since mbuf landed). Take a look at the
ice driver, which is built around work-arounds to make XDP work with
it.
Even on some quite low-end hardware (not a common case for 100G NICs) it
was performing worse.
The only advantage "legacy-rx" had is that it didn't require any
reserved headroom and tailroom. But iavf didn't use this, as it always
splits pages into two halves of 2k, while that save would only be useful
when striding. And again, XDP effectively removes that sole pro.
There's a train of features to land in IAVF soon: Page Pool, XDP, XSk,
multi-buffer etc. Each new would require adding more and more Danse
Macabre for absolutely no reason, besides making hotpath less and less
effective.
Remove the "feature" with all the related code. This includes at least
one very hot branch (typically hit on each new frame), which was either
always-true or always-false at least for a complete NAPI bulk of 64
frames, the whole private flags cruft, and so on. Some stats:
Function: add/remove: 0/4 grow/shrink: 0/7 up/down: 0/-721 (-721)
RO Data: add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-40 (-40)
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules.
Before introducing new changes, which would need to be copied over again,
start decoupling the already existing duplicate functionality into a new
module, which will be shared between several Intel Ethernet drivers.
Add the lookup table which converts 8/10-bit hardware packet type into
a parsed bitfield structure for easy checking packet format parameters,
such as payload level, IP version, etc. This is currently used by i40e,
ice and iavf and it's all the same in all three drivers.
The only difference introduced in this implementation is that instead of
defining a 256 (or 1024 in case of ice) element array, add unlikely()
condition to limit the input to 154 (current maximum non-reserved packet
type). There's no reason to waste 600 (or even 3600) bytes only to not
hurt very unlikely exception packets.
The hash computation function now takes payload level directly as a
pkt_hash_type. There's a couple cases when non-IP ptypes are marked as
L3 payload and in the previous versions their hash level would be 2, not
3. But skb_set_hash() only sees difference between L4 and non-L4, thus
this won't change anything at all.
The module is behind the hidden Kconfig symbol, which the drivers will
select when needed. The exports are behind 'LIBIE' namespace to limit
the scope of the functions.
Not that non-HW-specific symbols will live in yet another module,
libeth. This is done to easily distinguish pretty generic code ready
for reusing by any other vendor and/or for moving the layer up from
the code useful in Intel's 1-100G drivers only.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There are no more callers of gfs2_glock_queue_work() left, so remove
that helper. With that, we can now rename __gfs2_glock_queue_work()
back to gfs2_glock_queue_work() to get rid of some unnecessary clutter.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function do_xmote() is called with the glock spinlock held. Commit
86934198ee added a 'goto skip_inval' statement at the beginning of the
function to further below where the glock spinlock is expected not to be
held anymore. Then it added code there that requires the glock spinlock
to be held. This doesn't make sense; fix this up by dropping and
retaking the spinlock where needed.
In addition, when ->lm_lock() returned an error, do_xmote() didn't fail
the locking operation, and simply left the glock hanging; fix that as
well. (This is a much older error.)
Fixes: 86934198ee ("gfs2: Clear flags when withdraw prevents xmote")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Currently, function finish_xmote() takes and releases the glock
spinlock. However, all of its callers immediately take that spinlock
again, so it makes more sense to take the spin lock before calling
finish_xmote() already.
With that, thaw_glock() is the only place that sets the GLF_HAVE_REPLY
flag outside of the glock spinlock, but it also takes that spinlock
immediately thereafter. Change that to set the bit when the spinlock is
already held. This allows to switch from test_and_clear_bit() to
test_bit() and clear_bit() in glock_work_func().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
At unmount time, we would generally like to explicitly unlock as few
glocks as possible for efficiency. We are already skipping glocks that
don't have a lock value block (LVB), but we can also skip glocks which
are not held in DLM_LOCK_EX or DLM_LOCK_PW mode (of which gfs2 only uses
DLM_LOCK_EX under the name LM_ST_EXCLUSIVE).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: David Teigland <teigland@redhat.com>
When a DLM lockspace is released and there ares still locks in that
lockspace, DLM will unlock those locks automatically. Commit
fb6791d100 started exploiting this behavior to speed up filesystem
unmount: gfs2 would simply free glocks it didn't want to unlock and then
release the lockspace. This didn't take the bast callbacks for
asynchronous lock contention notifications into account, which remain
active until until a lock is unlocked or its lockspace is released.
To prevent those callbacks from accessing deallocated objects, put the
glocks that should not be unlocked on the sd_dead_glocks list, release
the lockspace, and only then free those glocks.
As an additional measure, ignore unexpected ast and bast callbacks if
the receiving glock is dead.
Fixes: fb6791d100 ("GFS2: skip dlm_unlock calls in unmount")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: David Teigland <teigland@redhat.com>
This consistency check was originally added by commit 9287c6452d
("gfs2: Fix occasional glock use-after-free"). It is ill-placed in
gfs2_glock_free() because if it holds there, it must equally hold in
__gfs2_glock_put() already. Either way, the check doesn't seem
necessary anymore.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Currently, gfs2_scan_glock_lru() decrements lru_count when a glock is
moved onto the dispose list. When such a glock is then stolen from the
dispose list while gfs2_dispose_glock_lru() doesn't hold the lru_lock,
lru_count will be decremented again, so the counter will eventually go
negative.
This bug has existed in one form or another since at least commit
97cc1025b1 ("GFS2: Kill two daemons with one patch").
Fix this by only decrementing lru_count when we actually remove a glock
and schedule for it to be unlocked and dropped. We also don't need to
remove and then re-add glocks when we can just as well move them back
onto the lru_list when necessary.
In addition, return the number of glocks freed as we should, not the
number of glocks moved onto the dispose list.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit 50e782a86c ("efi/unaccepted: Fix soft lockups caused by
parallel memory acceptance") has released the spinlock so other CPUs can
do memory acceptance in parallel and not triggers softlockup on other
CPUs.
However the softlock up was intermittent shown up if the memory of the
TD guest is large, and the timeout of softlockup is set to 1 second:
RIP: 0010:_raw_spin_unlock_irqrestore
Call Trace:
? __hrtimer_run_queues
<IRQ>
? hrtimer_interrupt
? watchdog_timer_fn
? __sysvec_apic_timer_interrupt
? __pfx_watchdog_timer_fn
? sysvec_apic_timer_interrupt
</IRQ>
? __hrtimer_run_queues
<TASK>
? hrtimer_interrupt
? asm_sysvec_apic_timer_interrupt
? _raw_spin_unlock_irqrestore
? __sysvec_apic_timer_interrupt
? sysvec_apic_timer_interrupt
accept_memory
try_to_accept_memory
do_huge_pmd_anonymous_page
get_page_from_freelist
__handle_mm_fault
__alloc_pages
__folio_alloc
? __tdx_hypercall
handle_mm_fault
vma_alloc_folio
do_user_addr_fault
do_huge_pmd_anonymous_page
exc_page_fault
? __do_huge_pmd_anonymous_page
asm_exc_page_fault
__handle_mm_fault
When the local irq is enabled at the end of accept_memory(), the
softlockup detects that the watchdog on single CPU has not been fed for
a while. That is to say, even other CPUs will not be blocked by
spinlock, the current CPU might be stunk with local irq disabled for a
while, which hurts not only nmi watchdog but also softlockup.
Chao Gao pointed out that the memory accept could be time costly and
there was similar report before. Thus to avoid any softlocup detection
during this stage, give the softlockup a flag to skip the timeout check
at the end of accept_memory(), by invoking touch_softlockup_watchdog().
Reported-by: Hossain, Md Iqbal <md.iqbal.hossain@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 50e782a86c ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add both MIPI CSI-2 nodes in the bcm283x tree and take care of the
Raspberry Pi / BCM2711 specific in the related files.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20240424153542.32503-6-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Currently intel_gt_reset() kills the GuC and then resets requested
engines. This is problematic because there is a dedicated CSB FIFO
which only GuC can access and if that FIFO fills up, the hardware
will block on the next context switch until there is space that means
the system is effectively hung. If an engine is reset whilst actively
executing a context, a CSB entry will be sent to say that the context
has gone idle. Thus if reset happens on a very busy system then
killing GuC before killing the engines will lead to deadlock because
of filled up CSB FIFO.
To address this issue, the GuC should be killed only after resetting
the requested engines and before calling intel_gt_init_hw().
v2: Improve commit message(John)
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422201951.633-2-nirmoy.das@intel.com
__intel_gt_reset() is really for resetting engines though
the name might suggest something else. So add a helper function
to remove confusions with no functional changes.
v2: Move intel_gt_reset_all_engines() next to
intel_gt_reset_engine() to make diff simple(John)
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422201951.633-1-nirmoy.das@intel.com
Kumar Kartikeya Dwivedi says:
====================
Introduce bpf_preempt_{disable,enable}
This set introduces two kfuncs, bpf_preempt_disable and
bpf_preempt_enable, which are wrappers around preempt_disable and
preempt_enable in the kernel. These functions allow a BPF program to
have code sections where preemption is disabled. There are multiple use
cases that are served by such a feature, a few are listed below:
1. Writing safe per-CPU alogrithms/data structures that work correctly
across different contexts.
2. Writing safe per-CPU allocators similar to bpf_memalloc on top of
array/arena memory blobs.
3. Writing locking algorithms in BPF programs natively.
Note that local_irq_disable/enable equivalent is also needed for proper
IRQ context protection, but that is a more involved change and will be
sent later.
While bpf_preempt_{disable,enable} is not sufficient for all of these
usage scenarios on its own, it is still necessary.
The same effect as these kfuncs can in some sense be already achieved
using the bpf_spin_lock or rcu_read_lock APIs, therefore from the
standpoint of kernel functionality exposure in the verifier, this is
well understood territory.
Note that these helpers do allow calling kernel helpers and kfuncs from
within the non-preemptible region (unless sleepable). Otherwise, any
locks built using the preemption helpers will be as limited as
existing bpf_spin_lock.
Nesting is allowed by keeping a counter for tracking remaining enables
required to be performed. Similar approach can be applied to
rcu_read_locks in a follow up.
Changelog
=========
v1: https://lore.kernel.org/bpf/20240423061922.2295517-1-memxor@gmail.com
* Move kfunc BTF ID declerations above css task kfunc for
!CONFIG_CGROUPS config (Alexei)
* Add test case for global function call in non-preemptible region
(Jiri)
====================
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240424031315.2757363-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce two new BPF kfuncs, bpf_preempt_disable and
bpf_preempt_enable. These kfuncs allow disabling preemption in BPF
programs. Nesting is allowed, since the intended use cases includes
building native BPF spin locks without kernel helper involvement. Apart
from that, this can be used to per-CPU data structures for cases where
programs (or userspace) may preempt one or the other. Currently, while
per-CPU access is stable, whether it will be consistent is not
guaranteed, as only migration is disabled for BPF programs.
Global functions are disallowed from being called, but support for them
will be added as a follow up not just preempt kfuncs, but rcu_read_lock
kfuncs as well. Static subprog calls are permitted. Sleepable helpers
and kfuncs are disallowed in non-preemptible regions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240424031315.2757363-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=riVJ
-----END PGP SIGNATURE-----
Merge tag 'for-6.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix information leak by the buffer returned from LOGICAL_INO ioctl
- fix flipped condition in scrub when tracking sectors in zoned mode
- fix calculation when dropping extent range
- reinstate fallback to write uncompressed data in case of fragmented
space that could not store the entire compressed chunk
- minor fix to message formatting style to make it conforming to the
commonly used style
* tag 'for-6.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix wrong block_start calculation for btrfs_drop_extent_map_range()
btrfs: fix information leak in btrfs_ioctl_logical_to_ino()
btrfs: fallback if compressed IO fails for ENOSPC
btrfs: scrub: run relocation repair when/only needed
btrfs: remove colon from messages with state
__bpf_prog_enter_sleepable_recur does recursion check which is not applicable
to wq callback. The callback function is part of bpf program and bpf prog might
be running on the same cpu. So recursion check would incorrectly prevent
callback from running. The code can call __bpf_prog_enter_sleepable(), but
run_ctx would be fake, hence use explicit rcu_read_lock_trace();
migrate_disable(); to address this problem. Another reason to open code is
__bpf_prog_enter* are not available in !JIT configs.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404241719.IIGdpAku-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202404241811.FFV4Bku3-lkp@intel.com/
Fixes: eb48f6cd41 ("bpf: wq: add bpf_wq_init")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is more logical to have the strtomem() test in string_kunit.c instead
of the memcpy() suite. Move it to live with memtostr().
Signed-off-by: Kees Cook <keescook@chromium.org>
Another ambiguous use of strncpy() is to copy from strings that may not
be NUL-terminated. These cases depend on having the destination buffer
be explicitly larger than the source buffer's maximum size, having
the size of the copy exactly match the source buffer's maximum size,
and for the destination buffer to get explicitly NUL terminated.
This usually happens when parsing protocols or hardware character arrays
that are not guaranteed to be NUL-terminated. The code pattern is
effectively this:
char dest[sizeof(src) + 1];
strncpy(dest, src, sizeof(src));
dest[sizeof(dest) - 1] = '\0';
In practice it usually looks like:
struct from_hardware {
...
char name[HW_NAME_SIZE] __nonstring;
...
};
struct from_hardware *p = ...;
char name[HW_NAME_SIZE + 1];
strncpy(name, p->name, HW_NAME_SIZE);
name[NW_NAME_SIZE] = '\0';
This cannot be replaced with:
strscpy(name, p->name, sizeof(name));
because p->name is smaller and not NUL-terminated, so FORTIFY will
trigger when strnlen(p->name, sizeof(name)) is used. And it cannot be
replaced with:
strscpy(name, p->name, sizeof(p->name));
because then "name" may contain a 1 character early truncation of
p->name.
Provide an unambiguous interface for converting a maybe not-NUL-terminated
string to a NUL-terminated string, with compile-time buffer size checking
so that it can never fail at runtime: memtostr() and memtostr_pad(). Also
add KUnit tests for both.
Link: https://lore.kernel.org/r/20240410023155.2100422-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Clang Static Checker (scan-build) warns:
drivers/net/wireless/ath/ath10k/debugfs_sta.c:line 429, column 3
Value stored to 'ret' is never read.
Return 'ret' rather than 'count' when 'ret' stores an error code.
Fixes: ee8b08a1be ("ath10k: add debugfs support to get per peer tids log via tracing")
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422034243.938962-1-suhui@nfschina.com
Currently, mlo_capable_flags is set to zero if dualmac device is
detected based on One Time Programmable (OTP) register value.
This is not generic and in future dualmac devices may support
Single Link Operation (SLO) and Multi Link Operation (MLO).
Thus, set mlo_capable_flags based on 'single_chip_mlo_support'
parameter from QMI PHY capability response message from the firmware.
Also, add check on mlo_capable_flags to disable MLO parameter in the
host capability QMI request message.
If the firmware does not respond with this optional parameter
'single_chip_mlo_support' in QMI PHY capability response, default
ab->mlo_capable_flags is used.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240418125609.3867730-3-quic_rajkbhag@quicinc.com
New parameter 'single_chip_mlo_support' was added in QMI PHY
capability response message. This is an optional parameter added
in QCN9274 firmware. This parameter states if the firmware
supports Single-Link Operation (SLO) and Multi-Link Operation (MLO)
within the same device.
If single_chip_mlo_support = 1, then intra device SLO/MLO is supported
in the firmware.
If single_chip_mlo_support = 0, then intra device SLO/MLO is not
supported in the firmware.
Hence, add support to read 'single_chip_mlo_support' parameter from
the QMI PHY capability response message.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240418125609.3867730-2-quic_rajkbhag@quicinc.com
When AP goes down or too far away without indication to STA, beacon miss
will be detected. Then for WCN7850's firmware, it will use roam event
to send beacon miss to host.
If STA doesn't handle the beacon miss, will keep the fake connection
and unable to roam.
So add support for WCN7850 to trigger disconnection from AP when
receiving this event from firmware.
It has to be noted that beacon miss event notification for QCN9274
to be handled in a separate patch as it uses STA kickout WMI event
to notify beacon miss and the current STA kickout event is processed
as low_ack.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Reviewed-by: Nicolas Escande <nico.escande@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412094447.2063-1-quic_kangyang@quicinc.com
By default CT code was passing just payload of the G2H event
message, while Relay code expects full G2H message including
HXG header which contains DATA0 field. Fix that.
Fixes: 26d4481ac2 ("drm/xe/guc: Start handling GuC Relay event messages")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419150351.358-1-michal.wajdeczko@intel.com
(cherry picked from commit 48c64d495f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the
action (free_gsc_pkt) in the event of a failure; therefore, there's no
necessity to call it within the return check.
-v2
Fix commit message. (Lucas)
Fixes: d8b1571312 ("drm/xe/huc: HuC authentication via GSC")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-4-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 22bf0bc04d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the action
(sysfs removal) in the event of a failure; therefore, there's no
necessity to call it within the return check.
Modify the return type of xe_gt_ccs_mode_sysfs_init to int, allowing the
caller to pass errors up the call chain. Should sysfs creation or
drmm_add_action_or_reset fail, error propagation will prompt a driver
load abort.
-v2
Edit commit message (Nikula/Lucas)
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Fixes: f3bc5bb4d5 ("drm/xe: Allow userspace to configure CCS mode")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a99641e387)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The TDX guest platform takes one bit from the physical address to
indicate if the page is shared (accessible by VMM). This bit is not part
of the physical_mask and is not preserved during mprotect(). As a
result, the 'shared' bit is lost during mprotect() on shared mappings.
_COMMON_PAGE_CHG_MASK specifies which PTE bits need to be preserved
during modification. AMD includes 'sme_me_mask' in the define to
preserve the 'encrypt' bit.
To cover both Intel and AMD cases, include 'cc_mask' in
_COMMON_PAGE_CHG_MASK instead of 'sme_me_mask'.
Reported-and-tested-by: Chris Oo <cho@microsoft.com>
Fixes: 41394e33f3 ("x86/tdx: Extend the confidential computing API to support TDX guests")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240424082035.4092071-1-kirill.shutemov%40linux.intel.com
Instead of reiterating the list, use list_for_each_entry_safe()
that allows to continue without starting over.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Message-ID: <20240424145020.1057216-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Program live video input format according to selected media bus format.
In the bridge mode of operation, DPSUB is connected to FPGA CRTC which
almost certainly supports a single media bus format as its output. Expect
this to be delivered via the new bridge atomic state. Program DPSUB
registers accordingly.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-6-c7f379b7168e@amd.com
Avoid usage of global zynqmp_dpsub.dma_enabled flag in DPSUB layer
context. This flag signals whether the driver runs in DRM CRTC or DRM
bridge mode, assuming that all display layers share the same live or
non-live mode of operation. Using per-layer mode instead of global flag
will simplify future support of the hybrid scenario.
Remove redundant checks in DMA request/release contexts as
zynqmp_disp_layer.info is well-defined for all layer types, including the
correct number of DMA channels required for each particular layer.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-5-c7f379b7168e@amd.com
DPSUB in bridge mode supports multiple input media bus formats.
Announce the list of supported input media bus formats via
drm_bridge.atomic_get_input_bus_fmts callback. Introduce a set of live
input formats supported by DPSUB. Add safeguards to format list functions
to prevent their misuse in the different layer modes contexts.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-4-c7f379b7168e@amd.com
Add a helper function capturing the first connected live display layer
discovery logic.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-3-c7f379b7168e@amd.com
Update live format defines to match DPSUB AV_BUF_LIVE_VID_CONFIG register
layout. These defines were never referenced before, so no other changes
required.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-2-c7f379b7168e@amd.com
