Convert the Renesas Clock Pulse Generator (CPG) Module Stop (MSTP)
Clocks Device Tree binding documentation to json-schema.
Drop R-Car Gen2 compatible values, which were obsoleted by the unified
"Renesas Clock Pulse Generator / Module Standby and Software Reset" DT
bindings.
Replace the obsolete example for R-Car H2 by an example that is still
valid.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200508100321.6720-1-geert+renesas@glider.be
Expose MIPI DisCo Slave properties in sysfs.
For Slave properties and Data Port 0, the attributes are managed with
simple devm_ support.
A Slave Device may have more than one Data Port (DPN), and each Data
Port can be sink or source. The attributes are created dynamically
using pre-canned macros, but still use devm_ with a name attribute
group to avoid creating kobjects - as requested by GregKH. In the
_show function, we use container_of() to retrieve port number and
direction required to extract the information.
Audio modes are not supported for now. Depending on the discussions
the SoundWire Device Class, we may add it later as is or follow the
new specification.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200518203551.2053-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the master properties as attributes. The description is directly
derived from the MIPI DisCo specification.
Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200518203551.2053-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use more meaningful member names in preparation for sysfs support.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200518203551.2053-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Quoth the man page:
```
If the tracee was restarted by PTRACE_SYSCALL or PTRACE_SYSEMU, the
tracee enters syscall-enter-stop just prior to entering any system
call (which will not be executed if the restart was using
PTRACE_SYSEMU, regardless of any change made to registers at this
point or how the tracee is restarted after this stop).
```
The parenthetical comment is currently true on x86 and powerpc,
but not currently true on arm64. arm64 re-checks the _TIF_SYSCALL_EMU
flag after the syscall entry ptrace stop. However, at this point,
it reflects which method was used to re-start the syscall
at the entry stop, rather than the method that was used to reach it.
Fix that by recording the original flag before performing the ptrace
stop, bringing the behavior in line with documentation and x86/powerpc.
Fixes: f086f67485 ("arm64: ptrace: add support for syscall emulation")
Cc: <stable@vger.kernel.org> # 5.3.x-
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Bin Lu <Bin.Lu@arm.com>
[catalin.marinas@arm.com: moved 'flags' bit masking]
[catalin.marinas@arm.com: changed 'flags' type to unsigned long]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Do it uncontionally, there's a separate peek function with
dma_fence_is_signalled() which can be called from atomic context.
v2: Consensus calls for an unconditional might_sleep (Chris,
Christian)
Full audit:
- dma-fence.h: Uses MAX_SCHEDULE_TIMOUT, good chance this sleeps
- dma-resv.c: Timeout always at least 1
- st-dma-fence.c: Save to sleep in testcases
- amdgpu_cs.c: Both callers are for variants of the wait ioctl
- amdgpu_device.c: Two callers in vram recover code, both right next
to mutex_lock.
- amdgpu_vm.c: Use in the vm_wait ioctl, next to _reserve/unreserve
- remaining functions in amdgpu: All for test_ib implementations for
various engines, caller for that looks all safe (debugfs, driver
load, reset)
- etnaviv: another wait ioctl
- habanalabs: another wait ioctl
- nouveau_fence.c: hardcoded 15*HZ ... glorious
- nouveau_gem.c: hardcoded 2*HZ ... so not even super consistent, but
this one does have a WARN_ON :-/ At least this one is only a
fallback path for when kmalloc fails. Maybe this should be put onto
some worker list instead, instead of a work per unamp ...
- i915/selftests: Hardecoded HZ / 4 or HZ / 8
- i915/gt/selftests: Going up the callchain looks safe looking at
nearby callers
- i915/gt/intel_gt_requests.c. Wrapped in a mutex_lock
- i915/gem_i915_gem_wait.c: The i915-version which is called instead
for i915 fences already has a might_sleep() annotation, so all good
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519132756.682888-1-daniel.vetter@ffwll.ch
This assertion was removed in commit b412c63f1c ("drm/i915/gt: Report
context-is-closed prior to pinning"), but accidentally restored by a
cherry-pick into drm-next and now has percolated back to
drm-intel-next-queued.
Fixes: 2e46a2a0b0 ("drm/i915: Use explicit flag to mark unreachable intel_context")
Fixes: 2b703bbda2 ("Merge drm/drm-next into drm-intel-next-queued")
References: b412c63f1c ("drm/i915/gt: Report context-is-closed prior to pinning")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520073048.2394034-1-chris@chris-wilson.co.uk
The mmsys driver is now the top level entry point for the multimedia
system (mmsys), we bind the clock driver by creating a platform device.
We also bind the MediaTek DRM driver which is not yet implement and
therefor will errror out for now.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200518113156.25009-3-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The mmsys driver is now the top level entry point for the multimedia
system (mmsys), we bind the clock driver by creating a platform device.
We also bind the MediaTek DRM driver which is not yet implement and
therefor will errror out for now.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200518113156.25009-2-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The mmsys driver is now the top level entry point for the multimedia
system (mmsys), we bind the clock driver by creating a platform device.
We also bind the MediaTek DRM driver which is not yet implement and
therefor will errror out for now.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200518113156.25009-1-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Node names are supposed to match the class of the device. The
mmsys node is a syscon as it provides more then just a clock controller.
Update the name.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20200518113156.25009-4-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Node names are supposed to match the class of the device, mmsys is a
system controller (syscon) not a clock controller, so change the node
name accordingly.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20200401201736.2980433-4-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Now that the mmsys driver is the top-level entry point for the
multimedia subsystem, we could bind the clock and the gpu driver on
those devices that is expected to work, so the drm driver is
intantiated by the mmsys driver and display, hopefully, working again.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200401201736.2980433-3-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Now that the mmsys driver is the top-level entry point for the
multimedia subsystem, we could bind the clock and the gpu driver on
those devices that is expected to work, so the drm driver is
intantiated by the mmsys driver and display, hopefully, working again on
those devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200401201736.2980433-2-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The mmsys driver supports only MT8173 device for now, but like other system
controllers is an important piece for other Mediatek devices. Actually
it depends on the mt8173 clock specific driver but that dependency is
not real as it can build without the clock driver. Instead of depends on
a specific model, make the driver depends on the generic ARCH_MEDIATEK and
enable by default so other Mediatek devices can start using it without
flood the Kconfig.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200401201736.2980433-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
changeset d5426f4c2e ("media: staging: atomisp: use clock framework for camera clocks")
removed a platform-specific code to set the clock rate, in favor of
using the Kernel clock framework.
However, instead of passing the frequency for clk_set_rate(),
it is passing either 0 or 1.
Looking at the original patchset, it seems that there are two
possible configurations for the ISP:
0 - it will use a 25 MHz XTAL to provide the clock;
1 - it will use a PLL with is set to 19.2 MHz
(only for the CHT version?)
Eventually, different XTALs and/or PLL frequencies might
be possible some day, so, re-implent the logic for it to be
more generic.
Fixes: d5426f4c2e ("media: staging: atomisp: use clock framework for camera clocks")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The printed message when a firmware version is wrong says nothing
usefull:
atomisp-isp2 0000:00:03.0: Fw version check failed.
atomisp-isp2: probe of 0000:00:03.0 failed with error -22
Print the expected and the received firmware version instead.
In order to do that, the firmware functions will need at least
a struct device pointer, so pass it.
While writing this patch, it was noticed that some of the
abstraction layers of this driver have functions that are never
called, but use this interface. Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As the atomisp driver should already be handling the ISP
PCI ID, there's no sense on keeping the dummy driver enabled
in tis case.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the changes, this function is now undefined if built
for ISP2400. So, move its implementation to the file which
calls it.
Reported-by: Francescodario Cuzzocrea <francescodario.cuzzocrea@mail.polimi.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some recent changes at V4L2 core changed the way querycap is handled.
Due to that, this warning is generated:
WARNING: CPU: 1 PID: 503 at drivers/media/v4l2-core/v4l2-dev.c:885 __video_register_device+0x93e/0x1120 [videodev]
as introduced by this commit:
commit 3c1350501c
Author: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Date: Tue Jul 23 04:21:25 2019 -0400
media: v4l2-dev/ioctl: require non-zero device_caps, verify sane querycap results
Now that all V4L2 drivers set device_caps in struct video_device, we can add
a check for this to ensure all future drivers fill this in.
The fix is simple: we just need to initialize dev_caps before
registering the V4L2 dev.
While here, solve other problems at VIDIOC_QUERYCAP ioctl.
Reported-by: Patrik Gfeller <patrik.gfeller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are currently two identical copies of some files, one
at css_2401_csi2p_system/ and another one at css_2401_system/.
Get rid of one of them, moving the remaining files to the
directory with the shortest name.
While here, do more renames, in order to get smaller path
names.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Asus Transformer T101HA comes with a newer hardware
version. Add support to load firmware for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are lots of places inside this driver checking for
ISP2400/ISP2401 verison. Get rid of most of those, while
keep building for both.
Most of stuff in this patch is trivial to solve.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that everything needed to build for ISP2401 is solved,
we can setup atomisp to build either for ISP2400 or ISP2401.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the current way, it will produce lots of errors because
the public header contains wrong definitions and the private
one has functions defined at the wrong order.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Probably due to some version conflicts while the atomisp code
were generated, some things don't build for ISP2401. So, use
the ISP2400 variant when available, or get rid of the
code that doesn't build.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver has very long directories without a good
reason (IMHO). Let's drop two directories from such hierarchy,
in order to simplify things a little bit and make the dir
output a bit more readable.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The *system_*.h files contain ISP-specific definitions, and are
used everywhere.
While the best would be to get rid of those in favor of some
ISP-specific structs, a change like that would require lots
of changes.
So, instead, let's rename those files replacing them by new
ones with ISP ifdefs on it, in order to select between the
two different versions.
We shall later convert this to some abrstraction layer,
but this change should help to be able to build support for
either ISP2400 or ISP2401.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several defines on ISP-specific definition sets
that are unused, related to VMEM_BAMEM. Get rid of those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
That's the last header file which had ifdefs for ISP2401.
The problem is that the conflicting dependencies were on another
file (sh_css_defs.h). Move the conflicting code to it, adding
a prefix which would describe what version the macro applies.
Then, ensure that binary.c will use the right version,
according with the hardware version.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The contents of this file is identical to ipu2_io_ls, except
for the bayer directory, with is only at ipu2_io_ls.
So, get rid of the duplicated code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are two instances of those, one for isp2401 and another
one for isp2400, both with identical contents, except for
comments and an ifdef.
Get rid of one of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some BIOSes seem to use different names for some regulators.
Use regulator_get_optional() for the first attempt, in order
to avoid using the dummy regulator and produce a warning, in
the case that the first attempt fails.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The last header (hive_isp_css_2401_irq_types_hrt.h) is also
almost identical, except by an if ISP2400 inside a comment
block.
Remove the duplication and keep just one file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While those headers are different, the different fields
aren't used at the driver. So, remove those different
unused fields, rename one define and use just one header
for all 3 different versions of the ISP.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
