When a gpio_chip wants to request a descriptor from itself
using gpiochip_request_own_desc() it needs to be able to specify
fully how to use the descriptor, notably line inversion
semantics. The workaround in the gpiolib.c can be removed
and cases (such as SPI CS) where we need at times to request
a GPIO with line inversion semantics directly on a chip for
workarounds, can be fully supported with this call.
Fix up some users of the API that weren't really using the
last flag to set up the line as input or output properly
but instead just calling direction setting explicitly
after requesting the line.
Cc: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Switch to using Donald Knuth's binary search algorithm (The Art of
Computer Programming, vol. 3, section 6.2.1). This should've been done
from the very beginning but the author must've been smoking something
very potent at the time.
The problem with the current one was that it would return the wrong
element index in certain situations:
https://lkml.kernel.org/r/CAM_iQpVd02zkVJ846cj-Fg1yUNuz6tY5q1Vpj4LrXmE06dPYYg@mail.gmail.com
and the noodling code after the loop was fishy at best.
So switch to using Knuth's binary search. The final result is much
cleaner and straightforward.
Fixes: 011d826111 ("RAS: Add a Corrected Errors Collector")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
The size of the vmemmap section is hardcoded to 1 TB to support the
maximum amount of system RAM in 4-level paging mode - 64 TB.
However, 1 TB is not enough for vmemmap in 5-level paging mode. Assuming
the size of struct page is 64 Bytes, to support 4 PB system RAM in 5-level,
64 TB of vmemmap area is needed:
4 * 1000^5 PB / 4096 bytes page size * 64 bytes per page struct / 1000^4 TB = 62.5 TB.
This hardcoding may cause vmemmap to corrupt the following
cpu_entry_area section, if KASLR puts vmemmap very close to it and the
actual vmemmap size is bigger than 1 TB.
So calculate the actual size of the vmemmap region needed and then align
it up to 1 TB boundary.
In 4-level paging mode it is always 1 TB. In 5-level it's adjusted on
demand. The current code reserves 0.5 PB for vmemmap on 5-level. With
this change, the space can be saved and thus used to increase entropy
for the randomization.
[ bp: Spell out how the 64 TB needed for vmemmap is computed and massage commit
message. ]
Fixes: eedb92abb9 ("x86/mm: Make virtual memory layout dynamic for CONFIG_X86_5LEVEL=y")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Kirill A. Shutemov <kirill@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: kirill.shutemov@linux.intel.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190523025744.3756-1-bhe@redhat.com
CAN supports software tx timestamps as of the below commit. Purge
any queued timestamp packets on socket destroy.
Fixes: 51f31cabe3 ("ip: support for TX timestamps on UDP and RAW sockets")
Reported-by: syzbot+a90604060cb40f5bdd16@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently the following message is observed when the flexcan
driver is probed:
flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=23)
The reason for printing 'ptrval' is explained at
Documentation/core-api/printk-formats.rst:
"Pointers printed without a specifier extension (i.e unadorned %p) are
hashed to prevent leaking information about the kernel memory layout. This
has the added benefit of providing a unique identifier. On 64-bit machines
the first 32 bits are zeroed. The kernel will print ``(ptrval)`` until it
gathers enough entropy."
Instead of passing %pK, which can print the correct address, simply
remove the entire message as it is not really that useful.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch add error path for can_init() to avoid possible crash if some
error occurs.
Fixes: 0d66548a10 ("[CAN]: Add PF_CAN core module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
During frame reception while the MCAN is in Error Passive state and the
Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen
that MCAN_IR.MRAF is set although there was no Message RAM access
failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is
generated.
Work around:
The Message RAM Access Failure interrupt routine needs to check whether
MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'.
In this case, reset MCAN_IR.MRAF. No further action is required.
This affects versions older than 3.2.0
Errata explained on Sama5d2 SoC which includes this hardware block:
http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf
chapter 6.2
Reproducibility: If 2 devices with m_can are connected back to back,
configuring different bitrate on them will lead to interrupt storm on
the receiving side, with error "Message RAM access failure occurred".
Another way is to have a bad hardware connection. Bad wire connection
can lead to this issue as well.
This patch fixes the issue according to provided workaround.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fully compatible with mcp2515, the mcp25625 have integrated transceiver.
This patch adds support for the mcp25625 to the existing mcp251x driver.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fully compatible with mcp2515, the mcp25625 have integrated transceiver.
This patch add the mcp25625 to the device tree bindings documentation.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit 9e5f1b273e ("can: xilinx_can: add support for Xilinx CAN FD
core") added a new can_bittiming_const structure for CAN FD cores that
support larger values for tseg1, tseg2, and sjw than previous Xilinx CAN
cores, but the commit did not actually take that into use.
Fix that.
Tested with CAN FD core on a ZynqMP board.
Fixes: 9e5f1b273e ("can: xilinx_can: add support for Xilinx CAN FD core")
Reported-by: Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Current we can meet timeout issue when setting a small bitrate like
10000 as follows on i.MX6UL EVK board (ipg clock = 66MHZ, per clock =
30MHZ):
| root@imx6ul7d:~# ip link set can0 up type can bitrate 10000
A link change request failed with some changes committed already.
Interface can0 may have been left with an inconsistent configuration,
please check.
| RTNETLINK answers: Connection timed out
It is caused by calling of flexcan_chip_unfreeze() timeout.
Originally the code is using usleep_range(10, 20) for unfreeze
operation, but the patch (8badd65 can: flexcan: avoid calling
usleep_range from interrupt context) changed it into udelay(10) which is
only a half delay of before, there're also some other delay changes.
After double to FLEXCAN_TIMEOUT_US to 100 can fix the issue.
Meanwhile, Rasmus Villemoes reported that even with a timeout of 100,
flexcan_probe() fails on the MPC8309, which requires a value of at least
140 to work reliably. 250 works for everyone.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This seems to have slipped in by accident when sorting the entries.
Fixes: ffbdd9172e
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
With ReST, [foo]_ means a reference to foo, causing this warning:
Documentation/driver-api/gpio/driver.rst:419: WARNING: Unknown target name: "devm".
Fix it by using a literal for the name.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix a couple of inconsistencies and locking problems in pmbus driver.
Register with thermal subsystem only on systems supporting devicetree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QTDh
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix a couple of inconsistencies and locking problems in pmbus driver
- Register with thermal subsystem only on systems supporting devicetree
* tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/core) Treat parameters as paged if on multiple pages
hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples
hwmon: (core) add thermal sensors only if dev->of_node is present
Failing to toggle a GDSC as the driver core is attaching the
power-domain to a device will cause a silent probe deferral. Provide an
explicit warning to the developer, in order to reduce the amount of time
it takes to debug this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The lockref cmpxchg loop is unbound as long as the spinlock is not
taken. Depending on the hardware implementation of compare-and-swap
a high number of loop retries might happen.
Add an upper bound to the loop to force the fallback to spinlocks
after some time. A retry value of 100 should not impact any hardware
that does not have this issue.
With the retry limit the performance of an open-close testcase
improved between 60-70% on ThunderX2.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Glauber <jglauber@marvell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Architectures that support memory tagging have a need to perform untagging
(stripping the tag) in various parts of the kernel. This patch adds an
untagged_addr() macro, which is defined as noop for architectures that do
not support memory tagging. The oncoming patch series will define it at
least for sparc64 and arm64.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix section mismatch between memblock_reserve and mem_reserve. This
fixes tinyconfig xtensa builds.
-----BEGIN PGP SIGNATURE-----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=4yeH
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fix from Max Filippov:
"Fix a section mismatch between memblock_reserve and mem_reserve.
This fixes tinyconfig xtensa builds"
* tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: Fix section mismatch between memblock_reserve and mem_reserve
Pull NVMe fixes from Sagi.
* 'nvme-5.2-rc-next' of git://git.infradead.org/nvme:
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
nvmet: fix data_len to 0 for bdev-backed write_zeroes
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
First set of fixes for 5.2. Most important here are buffer overflow
fixes for mwifiex.
rtw88
* fix out of bounds compiler warning
* fix rssi handling to get 4x more throughput
* avoid circular locking
rsi
* fix unitilised data warning, these are hopefully the last ones so
that the warning can be enabled by default
mwifiex
* fix buffer overflows
iwlwifi
* remove not used debugfs file
* various fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJc+iptAAoJEG4XJFUm622b+cQH/R/k3d55ldIADljn8P1N2JEb
Ogc5weW2DkUgfWdeKpJ1rp7JLaRPypmY4GipA7930SEEk8Ac46WShErH/6TLxEZD
1TGDV/qTtb4QJAZzdd/bs1J8IwaCUK1BolJfcpe5cdE/4/owe2pxiYbvFxAUCGRD
IRK/FJ/ohiv6SB1zUc4ATQ0HWI2OQjiiA4O6WctUSPdHHME7u4/7/MfhD2JBvjBW
454uLf8g2QhMWPdSw/PIXcND+FwgfrS7gCO7pZz4FUy7y6062LLaM+wcgmBxEN9t
SfaH1Ur14Hb0nw4QwYAvY2loJk15iowm7jvuAfqZP9vfpxdt4LYw4KrV/Y7FU8E=
=N7kc
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.2
First set of fixes for 5.2. Most important here are buffer overflow
fixes for mwifiex.
rtw88
* fix out of bounds compiler warning
* fix rssi handling to get 4x more throughput
* avoid circular locking
rsi
* fix unitilised data warning, these are hopefully the last ones so
that the warning can be enabled by default
mwifiex
* fix buffer overflows
iwlwifi
* remove not used debugfs file
* various fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some new files got converted to yaml, but references weren't
updated accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
- fix kselftest-merge to find config fragments in deeper directories
- fix kconfig unit test, which was broken by SPDX tag addition
- add + prefix to buildtar to suppress jobserver unavailable warning
- fix checkstack.pl to recognize arch=arm64
- suppress noisy warning from cc-cross-prefix
-----BEGIN PGP SIGNATURE-----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=xcwx
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix kselftest-merge to find config fragments in deeper directories
- fix kconfig unit test, which was broken by SPDX tag addition
- add + prefix to buildtar to suppress jobserver unavailable warning
- fix checkstack.pl to recognize arch=arm64
- suppress noisy warning from cc-cross-prefix
* tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use more portable 'command -v' for cc-cross-prefix
scripts/checkstack.pl: Fix arm64 wrong or unknown architecture
kbuild: tar-pkg: enable communication with jobserver
kconfig: tests: fix recursive inclusion unit test
kbuild: teach kselftest-merge to find nested config files
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/clk/mmp/clk-frac.c: In function clk_factor_set_rate:
drivers/clk/mmp/clk-frac.c:81:16: warning: variable prev_rate set but not used [-Wunused-but-set-variable]
It's never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
They are not used any more since
commit 7558562a70 ("clk: ti: Drop legacy clk-3xxx-legacy code")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Variable 'ddrphycfg_parents' is defined static and initialized, but not
used in the file.
../drivers/clk/mediatek/clk-mt8516.c:234:27: warning: ‘ddrphycfg_parents’ defined but not used [-Wunused-const-variable=]
static const char * const ddrphycfg_parents[] __initconst = {
^~~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mazenauer <philippe.mazenauer@outlook.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The code was setting the bit 21 of the CPCCR register to use a divider
of 2 for the "pll half" clock, and clearing the bit to use a divider
of 1.
This is the opposite of how this register field works: a cleared bit
means that the /2 divider is used, and a set bit means that the divider
is 1.
Restore the correct behaviour using the newly introduced .div_table
field.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The main clocks (cclk, hclk, pclk, mclk, ipu) were using
incorrect dividers, and thus reported an incorrect rate.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The main clocks (cclk, h0clk, h1clk, h2clk, c1clk, pclk) were using
incorrect dividers, and thus reported an incorrect rate.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The main clocks (cclk, hclk, pclk, mclk, lcd) were using
incorrect dividers, and thus reported an incorrect rate.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some clocks provided on Ingenic SoCs have dividers, whose hardware value
as written in the register cannot be expressed as an affine function
to the actual divider value.
For instance, for the CPU clock on the JZ4770, the dividers are coded as
follows:
------------------
| Bits | Div |
------------------
| 0 0 0 | 1 |
| 0 0 1 | 2 |
| 0 1 0 | 3 |
| 0 1 1 | 4 |
| 1 0 0 | 6 |
| 1 0 1 | 8 |
| 1 1 0 | 12 |
------------------
To support this setup, we introduce a new field in the
ingenic_cgu_div_info structure that allows to specify the divider table.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Introduce the LM36274 LED driver. This driver uses the ti-lmu
MFD driver to probe this LED driver. The driver configures only the
LED registers and enables the outputs according to the config file.
The driver utilizes the TI LMU (Lighting Management Unit) LED common
framework to set the brightness bits.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Add the LM36274 LED specific bindings.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
- Fix a crash that occurs when a kernel with 'nosmt' in the command
line is used to resume the system from hibernation (as the "restore"
kernel), because memory mapping differences between the restore and
image kernels cause SMT siblings to be woken up from idle states
and subsequently they try to fetch instructions from incorrect
memory locations (Jiri Kosina).
- Cause the new Performance and Energy Bias Hint (EPB) code to be
built only if CONFIG_PM is set, because that code is not really
necessary otherwise (Rafael Wysocki).
- Add kerneldoc comments to documents some helper functions related
to system-wide suspend to avoid possible confusion regarding their
purpose (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=r5bv
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash during resume from hibernation introduced during the
4.19 cycle, cause the new Performance and Energy Bias Hint (EPB) code
to be built only if CONFIG_PM is set and add a few missing kerneldoc
comments.
Specifics:
- Fix a crash that occurs when a kernel with 'nosmt' in the command
line is used to resume the system from hibernation (as the
"restore" kernel), because memory mapping differences between the
restore and image kernels cause SMT siblings to be woken up from
idle states and subsequently they try to fetch instructions from
incorrect memory locations (Jiri Kosina).
- Cause the new Performance and Energy Bias Hint (EPB) code to be
built only if CONFIG_PM is set, because that code is not really
necessary otherwise (Rafael Wysocki).
- Add kerneldoc comments to documents some helper functions related
to system-wide suspend to avoid possible confusion regarding their
purpose (Rafael Wysocki)"
* tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/power: Fix 'nosmt' vs hibernation triple fault during resume
PM: sleep: Add kerneldoc comments to some functions
x86: intel_epb: Do not build when CONFIG_PM is unset
get_desc() computes a pointer into the LDT while holding a lock that
protects the LDT from being freed, but then drops the lock and returns the
(now potentially dangling) pointer to its caller.
Fix it by giving the caller a copy of the LDT entry instead.
Fixes: 670f928ba0 ("x86/insn-eval: Add utility function to get segment descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When user post recv a srq with multiple sges, the hardware will get the
last correct sge and count the sge numbers according to the specific
identifier with lkey. For example, when the driver fills the sges with
every wr less than the max sge that the user configured when creating srq,
the hardware will stop getting the sge according to the specific lkey in
the sge. However, it will always end with the first sge in the current
post srq recv interface implementation.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
After following the document step by step, the `cat trace` can't be
worked without enabling tracing_on and might mislead newbies about
the functionality.
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
A previous change incorrectly changed the inverted logic and logically
negated the readl rather than the shifted readl result. Fix this by
adding in missing parentheses around the expression that needs to be
logically negated.
Addresses-Coverity: ("Logically dead code")
Fixes: 669cefb654 ("RDMA/hns: Remove jiffies operation in disable interrupt context")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix a couple of s/poped/popped/ typos.
Signed-off-by: George G. Davis <george_davis@mentor.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
In "Y+P" of this line, there are two non-ASCII characters(0xd9 0x8d)
following behind the 'Y'. Shown as a small '=' under the '+' in VIM
and a '賺' in webpage[1].
I think it's a mistake and remove these strange characters.
[1]: https://www.kernel.org/doc/Documentation/filesystems/xfs-delayed-logging-design.txt
Signed-off-by: Shiyang Ruan <ruansy.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It's much easier to figure out why the SDVO encoder refuses to cooperate
if we can see what status we got back.
v2: Zero initialize only the first character, not the whole buffer
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190410170941.28142-1-ville.syrjala@linux.intel.com
Before we go writing the infoframe let's make sure we have
the space for it. Not that it really matters since the write
loop would just terminate early in that case.
v2: Check after the debug print and ++ (Chris)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410170835.18867-1-ville.syrjala@linux.intel.com
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>