The define describing the bits for the struct field should be below
the field itself.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The current specification has updates to the command formats for
manage MAC opcodes (opcodes 0x0107 and 0x0108) and get PHY caps
(opcode 0x0600). Update the code to reflect this.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
For style consistency, use continue instead of an else block in
ice_pf_dcb_recfg.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Change minimum number of descriptor count from 32 to 64. This is to have
a feature parity with previous Intel NIC drivers.
Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add call to configure dropping egress LLDP packets in ice_vsi_setup
and remove the rule in ice_vsi_release.
Add calls to add/remove rule to route LLDP packets to default VSI when
FW LLDP engine is disabled/enabled and remove rule if applied during
ice_vsi_release.
In the function ice_add_eth_mac(), there is a line that hard codes the
filter info flag to TX. This is incorrect as this flag will be set by
the calling function that built the list of filters to add. So remove
the hard coded value.
This patch also contains a fix to stop treating the DCBx state of
"Not Started" as an error state that kicks DCB in SW mode. This will
address having non-cabled interfaces automatically go into SW mode
with the FW engine running.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The audit_data_to_entry() function ensures that the operator is valid
so we can get rid of these BUG() calls. We keep the "return 0" just
so the system behaves in a sane-ish manner should something go
horribly wrong.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
As discussed at the linux-doc ML, while we'll still support
version 1.3, it is time to recommend a more modern version.
So, let's switch the minimal requirements to Sphinx 1.7.9,
as it has the "-jauto" flag, with makes a lot faster when
building documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since Sphinx version 1.7, it is possible to use "-jauto" in
order to speedup documentation builds. On older versions,
while -j was already supported, one would need to set the
number of threads manually.
So, if SPHINXOPTS is not provided, add -jauto, in order to
speed up the build. That makes it *a lot* times faster than
without -j.
If one really wants to slow things down, it can just use:
make SPHINXOPTS=-j1 htmldocs
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
[ jc: fixed perl magic to determine sphinx version ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
At DT, files are being renamed to jason. Teach the script how to
handle such renames when used in fix mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There's a false positive on perf/util:
tools/perf/util/s390-cpumsf.c: Documentation/perf.data-file-format.txt
The file is there at tools/perf/Documentation/, but the logic
with detects relative documentation references inside tools is
not capable of detecting it.
So, improve it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are at least two cases where a documentation file was gone
for good, but the text still mentions it:
1) drivers/vhost/vhost.c:
the reference for Documentation/virtual/lguest/lguest.c is just
to give credits to the original work that vhost replaced;
2) Documentation/scsi/scsi_mid_low_api.txt:
It gives credit and mentions the old Documentation/Configure.help
file that used to be part of Kernel 2.4.x
As we don't want to keep the script to keep pinpoint to those
every time, let's add a logic at the script to allow it to ignore
valid false-positives like the above.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Only seek for translation renames inside the translation
directory.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Call the script every time a make docs target is selected, on
a simplified check mode.
With this change, the script will set two vars:
$min_version - obtained from `needs_sphinx` var inside
conf.py (currently, '1.3')
$rec_version - obtained from sphinx/requirements.txt.
With those changes, a target like "make htmldocs" will do:
1) If no sphinx-build/sphinx-build3 is found, it will run
the script on normal mode as before, checking for all
system dependencies and providing install hints for the
needed programs and will abort the build;
2) If no sphinx-build/sphinx-build3 is found, but there is
a sphinx_${VER}/bin/activate file, and if
${VER} >= $min_version (string comparation), it will
run in full mode, and will recommend to activate the
virtualenv. If there are multiple virtualenvs, it
will string sort the versions, recommending the
highest version and will abort the build;
3) If Sphinx is detected but has a version lower than
$min_version, it will run in full mode - with will
recommend creating a virtual env using sphinx/requirements.txt,
and will abort the build.
4) If Sphinx is detected and version is lower than
$rec_version, it will run in full mode and will
recommend creating a virtual env using sphinx/requirements.txt.
In this case, it **won't** abort the build.
5) If Sphinx is detected and version is equal or righer than
$rec_version it will return just after detecting the
version ("quick mode"), not checking if are there any
missing dependencies.
Just like before, if one wants to install Sphinx from the
distro, it has to call the script manually and use `--no-virtualenv`
argument to get the hints for his OS:
You should run:
sudo dnf install -y python3-sphinx python3-sphinx_rtd_theme
While here, add a small help for the three optional arguments
for the script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
RHEL8 was already launched. This test won't get it, and will
do the wrong thing. Ok, we could fix it, but now we check
Sphinx version to ensure that it matches the minimal (1.3),
so there's no need for an explicit check there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It is possible that multiple Sphinx virtualenvs are installed
on a given kernel tree. Change the logic to get the latest
version of those, as this is probably what the user wants.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix f2fs_show_options to show nodiscard mount option.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add error prints to get more details on the mount failure.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon Reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203233
- Reproduces
gcc poc_13.c
./run.sh f2fs
- Kernel messages
F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
kernel BUG at fs/f2fs/segment.c:2133!
RIP: 0010:update_sit_entry+0x35d/0x3e0
Call Trace:
f2fs_allocate_data_block+0x16c/0x5a0
do_write_page+0x57/0x100
f2fs_do_write_node_page+0x33/0xa0
__write_node_page+0x270/0x4e0
f2fs_sync_node_pages+0x5df/0x670
f2fs_write_checkpoint+0x364/0x13a0
f2fs_sync_fs+0xa3/0x130
f2fs_do_sync_file+0x1a6/0x810
do_fsync+0x33/0x60
__x64_sys_fsync+0xb/0x10
do_syscall_64+0x43/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The testcase fails because that, in fuzzed image, current segment was
allocated with LFS type, its .next_blkoff should point to an unused
block address, but actually, its bitmap shows it's not. So during
allocation, f2fs crash when setting bitmap.
Introducing sanity_check_curseg() to check such inconsistence of
current in-used segment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch cleans up documentation to cover missing sysfs entries.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
ext4_break_layouts() may fail e.g. due to a signal being delivered.
Thus we need to handle its failure gracefully and not by taking the
filesystem down. Currently ext4_break_layouts() failure is rare but it
may become more common once RDMA uses layout leases for handling
long-term page pins for DAX mappings.
To handle the failure we need to move ext4_break_layouts() earlier
during setattr handling before we do hard to undo changes such as
modifying inode size. To be able to do that we also have to move some
other checks which are better done without holding i_mmap_sem earlier.
Reported-and-tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are already defined ppcap and ppcap interrupt functions, use
the already defined functions for easy code read.
Fixes: 8a300c8fb1 ("ASoC: SOF: Intel: Add HDA controller for Intel DSP")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, there is only a 1 ms sleep after asserting PERST.
Reading the datasheets for different endpoints, some require PERST to be
asserted for 10 ms in order for the endpoint to perform a reset, others
require it to be asserted for 50 ms.
Several SoCs using this driver uses PCIe Mini Card, where we don't know
what endpoint will be plugged in.
The PCI Express Card Electromechanical Specification r2.0, section
2.2, "PERST# Signal" specifies:
"On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from
the power rails achieving specified operating limits."
Add a sleep of 100 ms before deasserting PERST, in order to ensure that
we are compliant with the spec.
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.5+
Add COMPILE_TEST and use IS_ENABLED(CONFIG_PCI) to sort out
cross-compilation issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We recently added COMPILE_TEST but new machine drivers were not
updated. Fix.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is not needed. Probably a copy/paste that was never removed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
skl-ssp-clk.c does not build on IA64 because the driver
uses the common clock interface, so make the driver depend
on COMMON_CLK.
Fixes this build error:
../sound/soc/intel/skylake/skl-ssp-clk.c:26:16: error: field 'hw' has incomplete type
struct clk_hw hw;
^~
[Corrections for SKL support by Pierre Bossart]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: Jie Yang <yang.jie@linux.intel.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We have duplicated code in multiple locations (atom, machine drivers,
SOF) to detect Baytrail, Cherrytrail and other SOCs. This is not very
elegant, and introduces dependencies on CONFIG_X86 that prevent
COMPILE_TEST from working.
Add common helpers to provide same functionality in a cleaner
way. This will also help support the DMI-based quirks being introduced
to handle SOF/SST autodetection.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the voice activation definitions were missing, they will be
needed for when hotwording is added. Also the source bits are only 2
wide not 3 and needed to be corrected.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following static checker errors:
drivers/fpga/zynqmp-fpga.c:50 zynqmp_fpga_ops_write()
error: 'eemi_ops' dereferencing possible ERR_PTR()
drivers/fpga/zynqmp-fpga.c:84 zynqmp_fpga_ops_state()
error: 'eemi_ops' dereferencing possible ERR_PTR()
Note: This does not handle the EPROBE_DEFER value in a
special manner.
Fixes commit c09f747112 ("fpga manager: Adding FPGA Manager support for
Xilinx zynqmp")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Altera MSI IP is a soft IP and is only available after
an FPGA image (with design containing it) is programmed.
Make driver modulable to support use case FPGA image is programmed the
after kernel has booted, so that the driver can be loaded upon request.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add test_vmalloc.sh to TEST_FILES to make sure it gets installed for
run_vmtests.
Fixed below error:
./run_vmtests: line 217: ./test_vmalloc.sh: No such file or directory
Tested with: make TARGETS=vm install INSTALL_PATH=$PWD/x
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Altera PCIe Rootport IP is a soft IP and is only available after
an FPGA image (whose design contains it) is programmed.
Make driver modulable to support use cases when FPGA image is
programmed after the kernel has booted, so that the driver
can be loaded upon request.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fixes following compiler warning
userfaultfd.c: In function ‘usage’:
userfaultfd.c:126:2: warning: format not a string literal and no format
arguments [-Wformat-security]
fprintf(stderr, examples);
Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test_core will skip the
test_cgcore_no_internal_process_constraint_on_threads test case if the
'cpu' controller missing in root's subtree_control. In fact we need to
set the 'cpu' in subtree_control, to make the testing meaningful.
./test_core
...
ok 4 # skip test_cgcore_no_internal_process_constraint_on_threads
...
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Claudio Zumbo <claudioz@fb.com>
Cc: Claudio <claudiozumbo@gmail.com>
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The cgroup testing relys on the root cgroup's subtree_control setting,
If the 'memory' controller isn't set, some test cases will be failed
as following:
$sudo ./test_core
not ok 1 test_cgcore_internal_process_constraint
ok 2 test_cgcore_top_down_constraint_enable
not ok 3 test_cgcore_top_down_constraint_disable
...
To correct this unexpected failure, this patch write the 'memory' to
subtree_control of root to get a right result.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Claudio Zumbo <claudioz@fb.com>
Cc: Claudio <claudiozumbo@gmail.com>
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The cgroup testing relies on the root cgroup's subtree_control setting,
If the 'memory' controller isn't set, all test cases will be failed
as following:
$ sudo ./test_memcontrol
not ok 1 test_memcg_subtree_control
not ok 2 test_memcg_current
ok 3 # skip test_memcg_min
not ok 4 test_memcg_low
not ok 5 test_memcg_high
not ok 6 test_memcg_max
not ok 7 test_memcg_oom_events
ok 8 # skip test_memcg_swap_max
not ok 9 test_memcg_sock
not ok 10 test_memcg_oom_group_leaf_events
not ok 11 test_memcg_oom_group_parent_events
not ok 12 test_memcg_oom_group_score_events
To correct this unexpected failure, this patch write the 'memory' to
subtree_control of root to get a right result.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Jay Kamat <jgkamat@fb.com>
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since commit 9012d01166 ("compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING"), xtensa:tinyconfig fails to build with section
mismatch errors.
WARNING: vmlinux.o(.text.unlikely+0x68): Section mismatch in reference
from the function ___pa()
to the function .meminit.text:memblock_reserve()
WARNING: vmlinux.o(.text.unlikely+0x74): Section mismatch in reference
from the function mem_reserve()
to the function .meminit.text:memblock_reserve()
FATAL: modpost: Section mismatches detected.
This was not seen prior to the above mentioned commit because mem_reserve()
was always inlined.
Mark mem_reserve(() as __init_memblock to have it reside in the same
section as memblock_reserve().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <1559220098-9955-1-git-send-email-linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Commit 0e7df22401 ("PCI: Add sysfs sriov_drivers_autoprobe to control
VF driver binding") allows the user to specify that drivers for VFs of
a PF should not be probed, but it actually causes pci_device_probe() to
return success back to the driver core in this case. Therefore by all
sysfs appearances the device is bound to a driver, the driver link from
the device exists as does the device link back from the driver, yet the
driver's probe function is never called on the device. We also fail to
do any sort of cleanup when we're prohibited from probing the device,
the IRQ setup remains in place and we even hold a device reference.
Instead, abort with errno before any setup or references are taken when
pci_device_can_probe() prevents us from trying to probe the device.
Link: https://lore.kernel.org/lkml/155672991496.20698.4279330795743262888.stgit@gimli.home
Fixes: 0e7df22401 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Break bits out of key_unlink() into helper functions so that they can be
used in implementing key_move().
Signed-off-by: David Howells <dhowells@redhat.com>
Add index.rst for PCI subsystem. More docs will be added later.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We should set up the partitions in the right way so we will find out
what is in the flash.
The ARM Firmware Suite now has its own compatible and proper device
tree bindings to trigger discovery of the flash contents, and Linux
supports handling the new type of AFS partitions.
Based on commit 7f8e78ca90 ("arm64: dts: juno: set the right partition
type for NOR flash")
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Accessing the NOR flash memory from the kernel will disrupt CPU sleep/
idles states and CPU hotplugging. We need to disable this DT node by
default. Setups that want to access the flash can modify this entry to
enable the flash again but also ensuring to disable CPU idle states and
CPU hotplug.
The platform firmware assumes the flash is always in read mode while
Linux kernel driver leaves NOR flash in "read id" mode after
initialization. If it gets used actively, it can be in some other state.
So far we had not seen this issue as the NOR flash drivers in kernel
were not enabled by default. However it was enable in multi_v7 config by
Commit 5f068190cc ("ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH")
So, let's mark the NOR flash disabled so that the platform can boot
again. This based on:
Commit 980bbff018 ("ARM64: juno: disable NOR flash node by default")
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Recently syzbot in conjunction with KMSAN reported that
ptrace_peek_siginfo can copy an uninitialized siginfo to userspace.
Inspecting ptrace_peek_siginfo confirms this.
The problem is that off when initialized from args.off can be
initialized to a negaive value. At which point the "if (off >= 0)"
test to see if off became negative fails because off started off
negative.
Prevent the core problem by adding a variable found that is only true
if a siginfo is found and copied to a temporary in preparation for
being copied to userspace.
Prevent args.off from being truncated when being assigned to off by
testing that off is <= the maximum possible value of off. Convert off
to an unsigned long so that we should not have to truncate args.off,
we have well defined overflow behavior so if we add another check we
won't risk fighting undefined compiler behavior, and so that we have a
type whose maximum value is easy to test for.
Cc: Andrei Vagin <avagin@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+0d602a1b0d8c95bdf299@syzkaller.appspotmail.com
Fixes: 84c751bd4a ("ptrace: add ability to retrieve signals without removing from a queue (v4)")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The A83T SoC has a camera sensor interface (known as CSI in Allwinner
lingo), which is similar to the one found on the A64 and H3. The only
difference seems to be that support of MIPI CSI through a connected
MIPI CSI-2 bridge.
Add a device node for it, and pinctrl nodes for the commonly used MCLK
and 8-bit parallel interface. The property /omit-if-no-ref/ is added to
the pinctrl nodes to keep the device tree blob size down if they are
unused.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
For some reason, the RTC vendor is reported to be phg, while the part is
actually made by the much more known NXP. Fix that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Even though the SWAC is just a baseboard to the icnova SoM, the vendor of
the baseboard somehow ended up with the board name instead of the vendor
name. Fix that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
One of the usage of the LRADC is to implement buttons. The bindings define
that we should have one subnode per button, with their associated voltage
as a property.
However, there was no reg property but we still used the voltage associated
to the button as the unit-address, which eventually generated warnings in
DTC.
Rename the node names to avoid those warnings.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>