As stated in struct drm_encoder, crtc field should only be used
by non-atomic drivers.
So here caching the pipe id in intel_psr_enable() what is way more
simple and efficient than at every call to
intel_psr_flush()/invalidate() get the
drm.mode_config.connection_mutex lock to safely be able to get the
pipe id by reading drm_connector_state.crtc.
This should fix the null pointer dereference crash below as the
previous way to get the pipe id was prone to race conditions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105959
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128072838.22773-1-jose.souza@intel.com
Deassert the reset and wireless disable signals on the CON2 mini-PCIe
socket. That allows the host to detect USB devices on the mini-PCIe
socket.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This reset signal controls the Marvell 1512 1G PHY.
Note that current implementation queries the PHY over the MDIO bus
(get_phy_device() call from of_mdiobus_register_phy()) before reset
signal deassert. If the PHY reset signal is asserted at boot time, PHY
registration fails. So current code relies on the bootloader to deassert
the reset signal.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The fixed regulator driver ignores the gpio flags, so this change has
no practical effect in the current implementation. Fix it anyway to
correct the hardware description.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
was introduced by a patch that tried to fix one bug, but by doing so created
another bug. As both bugs corrupt the output (but they do not crash the
kernel), I decided to fix the design such that it could have both bugs
fixed. The original fix, fixed time reporting of the function graph tracer
when doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt the time
keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the other
use case was the graph call depth. Although, the two may be closely
related, where they got updated was the issue that lead to the two different
bugs that required the two use cases to be updated differently.
The big issue with this fix is that it requires changing each architecture.
The good news is, I was able to remove a lot of code that was duplicated
within the architectures and place it into a single location. Then I could
make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and before
doing so, I cross compiled all the affected architectures to make sure that
they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW/4NPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWAAQCyUIRLgYImr81eTl52lxNRsULk+aiI
U29kRFWWU0c40AEA1X9sDF0MgOItbRGfZtnHTZEousXRDaDf4Fge2kF7Egg=
=liQ0
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While rewriting the function graph tracer, I discovered a design flaw
that was introduced by a patch that tried to fix one bug, but by doing
so created another bug.
As both bugs corrupt the output (but they do not crash the kernel), I
decided to fix the design such that it could have both bugs fixed. The
original fix, fixed time reporting of the function graph tracer when
doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt
the time keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the
other use case was the graph call depth. Although, the two may be
closely related, where they got updated was the issue that lead to the
two different bugs that required the two use cases to be updated
differently.
The big issue with this fix is that it requires changing each
architecture. The good news is, I was able to remove a lot of code
that was duplicated within the architectures and place it into a
single location. Then I could make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and
before doing so, I cross compiled all the affected architectures to
make sure that they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct"
* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sched, trace: Fix prev_state output in sched_switch tracepoint
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Reverse the order of pushing the ret_stack and the callback
function_graph: Move return callback before update of curr_ret_stack
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Make ftrace_push_return_trace() static
sparc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
ARM: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
function_graph: Create function_graph_enter() to consolidate architecture code
Running the Clang static analyzer on IORT code detected the following
error:
Logic error: Branch condition evaluates to a garbage value
in
iort_get_platform_device_domain()
If the named component associated with a given device has no IORT
mappings, iort_get_platform_device_domain() exits its MSI mapping loop
with msi_parent pointer containing garbage, which can lead to erroneous
code path execution.
Initialize the msi_parent pointer, fixing the bug.
Fixes: d4f54a1866 ("ACPI: platform: setup MSI domain for ACPI based
platform device")
Reported-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like it was missed when setting support was added.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to set the NO_EVICT flag on the ghost object or otherwise we are
adding it to the LRU.
When it is added to the LRU we can run into a race between destroying
and evicting it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=2Pvh
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-11-30' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This weeks instalment of fixes. Looks fairly like business as usual
and everything seems to rolling along. There was one MST fix applied
and reverted in the misc tree, but otherwise nothing too strange in
here.
core:
- incorrect master setting on error fix
i915:
- only GVT fixes this week:
* one MOCS register load
* rpm lock fix
* use after free
rcar-du:
- regression fix for group start
amdgpu:
- DP MST fix
- GPUVM fix for huge pages
- RLC fix for vega20
ast:
- fix EDID reading stability
- ioreg free fix
meson:
- sleep in irq fix
- vblank fixes
- array boundary fix"
* tag 'drm-fixes-2018-11-30' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fixed reading monitor EDID not stable issue
drm/ast: Fix incorrect free on ioregs
Revert "drm/dp_mst: Skip validating ports during destruction, just ref"
drm/amdgpu: Add delay after enable RLC ucode
drm/amdgpu: Avoid endless loop in GPUVM fragment processing
drm/amdgpu: Cast to uint64_t before left shift
drm/meson: add support for 1080p25 mode
drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut()
drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config
drm/meson: Fixes for drm_crtc_vblank_on/off support
drm: set is_master to 0 upon drm_new_set_master() failure
drm/dp_mst: Skip validating ports during destruction, just ref
drm: rcar-du: Fix DU3 start/stop on M3-N
drm/amd/dm: Understand why attaching path/tile properties are needed
drm/amd/dm: Don't forget to attach MST encoders
drm/i915/gvt: Avoid use-after-free iterating the gtt list
drm/i915/gvt: ensure gpu is powered before do i915_gem_gtt_insert
drm/i915/gvt: not to touch undefined MOCS registers
Pull NVMe fixes from Christoph:
"Various fixlets all over."
* 'nvme-4.20' of git://git.infradead.org/nvme:
nvme-rdma: fix double freeing of async event data
nvme: flush namespace scanning work just before removing namespaces
nvme: warn when finding multi-port subsystems without multipathing enabled
nvme-pci: fix surprise removal
nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request()
nvme: Free ctrl device name on init failure
The stackleak_erase() function is called on the trampoline stack at the
end of syscall. This stack is not big enough for ftrace and kprobes
operations, e.g. it can be exhausted if we use kprobe_events for
stackleak_erase().
So let's disable function tracing and kprobes of stackleak_erase().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 10e9ae9fab ("gcc-plugins: Add STACKLEAK plugin for tracking the kernel stack")
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
[Why]
To prepare for clock debug logging. With the exception of removing
max_supported_dppclk_khz from logs, there are no functional changes.
[How]
Add clk_bypass struct and clean up buffer logic
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Su Chung <Su.Chung@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Fatemeh Darbehani <Fatemeh.Darbehani@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dce100 was set to always pass safe_to_lower = false
to the clock manager
Thus, on suspend the clocks were not being set to 0
which is incorrect behaviour
This was causing s3 resume to blackscreen on intel
CPUs with dce100 GPUs attached
(Note that the hash in this Fixes: tag is the hash on Alex's tree)
Fixes: ae7d8aeb38d7 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead")
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dithering needs to be enabled or disabled as requested. If
dc_stream_update->dither_option is non-null, program the FMT blocks.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When running igt@kms_plane@pixel-format-pipe-* tests the CRC read will
time out and the test will fail.
This is because the CRTC is duplicated but the crc_enabled parameter
isn't copied over to the new dm_crtc_state. CRC reads will time out
because amdgpu_dm_crtc_handle_crc_irq will no longer call
drm_crtc_add_crc_entry.
[How]
Copy crc_enabled when duplicating the state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
add customizable log with a message input, which is for adding
test log in debugging as printf function in ETW.
[Usage]
EVENT_LOG_CUST_MSG1("TestLog","Hello World %d=0x%x", 123, pDC);
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For more clear usage in future
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] fbc is within the data path from memory to dce. while
re-configure mc dmif, fbc should be enabled. otherwise, fbc
may not be enabled properly.
[HOW] before re-configure mc dmif, disable fbc, only after
dmif re-configuration fully done, enable fbc again.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Use provided infopacket in stream (if valid) instead of reconstructing
in set_vendor_info_packet()
* Use proper format for enums
* Use dc info packet struct instead
Signed-off-by: Harmanprit Tatla <Harmanprit.Tatla@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Failure to read Detailed Capabilities Info.
[How]
Read Detailed Capbilities Info 80h-08Fh.
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use axis instead of axix
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This patch is for use by dm, no need for it in dc.
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are a lot of unintuitive parts of the dm-dc interface.
It would help us if these were documented to provide
a common understanding of what they are supposed to do
[How]
Most of this documentation is stubs, to be filled out more
thoroughly by the experts
Not every dm-accessible function and struct is mentioned.
Simple functions like getters, setters, retain, release,
create, destroy can be left unadorned.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When there are multiple aux transaction in parallel, it is sometime
sporadically the aux transaction starts to continuously fail. The
aux transaction was failing because the busy bit for the given gpio
pin was always set. The busy bit was alway set because the
programming sequence to read, modify and write busy bit was not
atomic. Due to which when multiple threads are trying to modify the
busy bits for their gpio pins in the same integer variable sometimes
the busy bits integer variable is written with old data causing
failure.
[how]
Instead of using individual bits to track gpio pins and grouping
them to integers, one byte will be allcoated for each gpio pin.
Now whenever a gpio pin needs to be set to mark being used, only
writing a value of one to that byte is sufficient, other bytes
are not impacted. Also no need to have atomicity with bytes unlike
with bits.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like it was missed when setting support was added.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When paging queue is enabled, it use the second page of doorbell.
The AMDGPU_DOORBELL64_MAX_ASSIGNMENT definition assumes all the
kernel doorbells are in the first page. So with paging queue enabled,
the total kernel doorbell range should be original num_doorbell plus
one page (0x400 in dword), not *2.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to set the NO_EVICT flag on the ghost object or otherwise we are
adding it to the LRU.
When it is added to the LRU we can run into a race between destroying
and evicting it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With scaling, underscan and abm changes we can end up calling
commit_planes_to_stream in commit_tail. This call uses dm_state->context
which can be NULL if the commit was a fast update.
[How]
Use dc_state instead since that can't be NULL unless the system ran
out of memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108912
Fixes: e64abff2f133 ("drm/amd/display: Use private obj helpers for dm_atomic_state")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.
Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
A set of small driver and core code fixes:
- Small series fixing longtime user triggerable bugs in the
ODP processing inside mlx5 and core code
- Various small driver malfunctions and crashes (use after, free, error
unwind, implementation bugs)
- A misfunction of the RDMA GID cache that can be triggered by the
administrator
-----BEGIN PGP SIGNATURE-----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=QrHg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"This is a bit later than usual for our first -rc but I'm not seeing
anything worry-some in the RDMA tree right now. Quiet so far this -rc
cycle, only a few internal driver related bugs and a small series
fixing ODP bugs found by more advanced testing.
A set of small driver and core code fixes:
- Small series fixing longtime user triggerable bugs in the ODP
processing inside mlx5 and core code
- Various small driver malfunctions and crashes (use after, free,
error unwind, implementation bugs)
- A misfunction of the RDMA GID cache that can be triggered by the
administrator"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Initialize return variable in case pagefault was skipped
IB/mlx5: Fix page fault handling for MW
IB/umem: Set correct address to the invalidation function
IB/mlx5: Skip non-ODP MR when handling a page fault
RDMA/hns: Bugfix pbl configuration for rereg mr
iser: set sector for ambiguous mr status errors
RDMA/rdmavt: Fix rvt_create_ah function signature
IB/mlx5: Avoid load failure due to unknown link width
IB/mlx5: Fix XRC QP support after introducing extended atomic
RDMA/bnxt_re: Avoid accessing the device structure after it is freed
RDMA/bnxt_re: Fix system hang when registration with L2 driver fails
RDMA/core: Add GIDs while changing MAC addr only for registered ndev
RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WR
net/mlx5: Fix XRC SRQ umem valid bits
Userspace hasn't used submit cmds with submit_offset != 0 for a while,
but this starts cropping up again with cmdstream sub-buffer-allocation
in libdrm_freedreno.
Doesn't do much good to increment the buf ptr before assigning it.
Fixes: 78b8e5b847 drm/msm: dump a rd GPUADDR header for all buffers in the command
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The msm_gpu_open() function should free "show_priv" on error or it
causes static checker warnings.
Fixes: 4f776f4511 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The current recovery code gets a pointer to the task struct and does a
few things all within the rcu_read_lock. This puts constraints on the
types of gfp flags that can be used within the rcu lock. This patch
instead gets a reference to the task within the rcu lock and releases
the lock immediately, this way the task stays afloat until we need it and
we also get to use the desired gfp flags.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
This patch simply checks first to see if the target can support crash dump
capture before proceeding.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Currently, a lock can block pending requests, but all pending
requests are equal. If lots of pending requests are
mutually exclusive, this means they will all be woken up
and all but one will fail. This can hurt performance.
So we will allow pending requests to block other requests.
Only the first request will be woken, and it will wake the others.
This patch doesn't implement this fully, but prepares the way.
- It acknowledges that a request might be blocking other requests,
and when the request is converted to a lock, those blocked
requests are moved across.
- When a request is requeued or discarded, all blocked requests are
woken.
- When deadlock-detection looks for the lock which blocks a
given request, we follow the chain of ->fl_blocker all
the way to the top.
Tested-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Both locks_remove_posix() and locks_remove_flock() use a
struct file_lock without calling locks_init_lock() on it.
This means the various list_heads are not initialized, which
will become a problem with a later patch.
So change them both to initialize properly. For flock locks,
this involves using flock_make_lock(), and changing it to
allow a file_lock to be passed in, so memory allocation isn't
always needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Rather than assuming all-zeros is sufficient, use the available API to
initialize the file_lock structure use for unlock. VFS-level changes
will soon make it important that the list_heads in file_lock are
always properly initialized.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Rather than assuming all-zeros is sufficient, use the available API to
initialize the file_lock structure use for unlock. VFS-level changes
will soon make it important that the list_heads in file_lock are
always properly initialized.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Using memcpy() to copy lock requests leaves the various
list_head in an inconsistent state.
As we will soon attach a list of conflicting request to
another pending request, we need these lists to be consistent.
So change NFS to use locks_init_lock/locks_copy_lock instead
of memcpy.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
This functionality will be useful in future patches, so
split it out from locks_wake_up_blocks().
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
struct file lock contains an 'fl_next' pointer which
is used to point to the lock that this request is blocked
waiting for. So rename it to fl_blocker.
The fl_blocked list_head in an active lock is the head of a list of
blocked requests. In a request it is a node in that list.
These are two distinct uses, so replace with two list_heads
with different names.
fl_blocked_requests is the head of a list of blocked requests
fl_blocked_member is a node in a member of that list.
The two different list_heads are never used at the same time, but that
will change in a future patch.
Note that a tracepoint is changed to report fl_blocker instead
of fl_next.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>