Commit graph

982,081 commits

Author SHA1 Message Date
Atish Patra
f99fb607fb
RISC-V: Use Linux logical CPU number instead of hartid
Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Atish Patra
6825c7a80f
RISC-V: Add logical CPU indexing for RISC-V
Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.

Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Atish Patra
a37d56fc40
RISC-V: Use WRITE_ONCE instead of direct access
The secondary harts spin on couple of per cpu variables until both of
these are non-zero so it's not necessary to have any ordering here.
However, WRITE_ONCE should be used to avoid tearing.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Palmer Dabbelt
46373cb442
RISC-V: Use mmgrab()
commit f1f1007644 ("mm: add new mmgrab() helper") added a
helper that we missed out on.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
177fae4515
RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
The old name was a bit odd.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
b2f8cfa7ac
RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
It's a bit confusing exactly what this function does: it actually
returns the hartid of an OF processor node, failing with -1 on invalid
nodes.  I've changed the name to _hartid() in order to make that a bit
more clear, as well as adding a comment.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
9639a44394
RISC-V: Provide a cleaner raw_smp_processor_id()
I'm not sure how I managed to miss this the first time, but this is much
better.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting and other fixes]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Atish Patra
6db170ff4c
RISC-V: Disable preemption before enabling interrupts
Currently, irq is enabled before preemption disabling happens.
If the scheduler fired right here and cpu is scheduled then it
may blow up.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: Commit text and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
b18d6f0525
RISC-V: Comment on the TLB flush in smp_callin()
This isn't readily apparent from reading the code.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
19ccf29bb1
RISC-V: Filter ISA and MMU values in cpuinfo
We shouldn't be directly passing device tree values to userspace, both
because there could be mistakes in device trees and because the kernel
doesn't support arbitrary ISAs.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: checkpatch fix and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:35 -07:00
Palmer Dabbelt
566d6c428e
RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
These are just hard coded in the RISC-V port, which doesn't make any
sense.  We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:35 -07:00
Anup Patel
1ed4237ab6
RISC-V: No need to pass scause as arg to do_IRQ()
The scause is already part of pt_regs so no need to pass
scause as separate arg to do_IRQ().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:35 -07:00
Vincent Chen
827a438156
RISC-V: Avoid corrupting the upper 32-bit of phys_addr_t in ioremap
For 32bit, the upper 32-bit of phys_addr_t will be flushed to zero
after AND with PAGE_MASK because the data type of PAGE_MASK is
unsigned long. To fix this problem, the page alignment is done by
subtracting the page offset instead of AND with PAGE_MASK.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Zong Li
757331db92
RISC-V: Select GENERIC_LIB_UMODDI3 on RV32
On 32-bit, it need to use __umoddi3 by some drivers.

Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Zong Li
6315730e9e
lib: Add umoddi3 and udivmoddi4 of GCC library routines
Add umoddi3 and udivmoddi4 support for 32-bit.

The RV32 need the umoddi3 to do modulo when the operands are long long
type, like other libraries implementation such as ucmpdi2, lshrdi3 and
so on.

I encounter the undefined reference 'umoddi3' when I use the in
house dma driver, although it is in house driver, but I think that
umoddi3 is a common function for RV32.

The udivmoddi4 and umoddi3 are copies from libgcc in gcc. There are other
functions use the udivmoddi4 in libgcc, so I separate the umoddi3 and
udivmoddi4 for flexible extension in the future.

Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Zong Li
51858aaf9b
RISC-V: Use swiotlb on RV64 only
Only RV64 supports swiotlb. On RV32, it don't select the SWIOTLB.

Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Zong Li
7f47c73b35
RISC-V: Build tishift only on 64-bit
Only RV64 supports 128 integer size.

Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:55 -07:00
Alan Kao
9411ec60c2
Auto-detect whether a FPU exists
We expect that a kernel with CONFIG_FPU=y can still support no-FPU
machines. To do so, the kernel should first examine the existence of a
FPU, then do nothing if a FPU does exist; otherwise, it should
disable/bypass all FPU-related functions.

In this patch, a new global variable, has_fpu, is created and determined
when parsing the hardware capability from device tree during booting.
This variable is used in those FPU-related functions.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao
9671f70614
Allow to disable FPU support
FPU codes have been separated from common part in previous patches.
This patch add the CONFIG_FPU option and some stubs, so that a no-FPU
configuration is allowed.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao
e8be530233
Cleanup ISA string setting
This patch cleanup the MARCH string passing to both compiler and
assembler.  Note that the CFLAGS should not contain "fd" before we
have mechnisms like kernel_fpu_begin/end in other architectures.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao
007f5c3589
Refactor FPU code in signal setup/return procedures
FPU-related logic is separated from normal signal handling path in
this patch.  Kernel can easily be configured to exclude those procedures
for no-FPU systems.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao
e68ad867f7
Extract FPU context operations from entry.S
We move __fstate_save and __fstate_restore to a new source
file, fpu.S.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:22 -07:00
Linus Torvalds
b8e445b689 hwmon updates for v4.20
- Add support for trace events to hwmon core
 - Add support for NCT6797D, NCT6798D, MAX31725/6, LTM4686
 - Support all AMD Family 15h Model 6xh and Model 7xh processors
   in k10temp driver
 - Convert ina3221 driver to _info API
 - Fixes, cleanups, and improvements in various drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIbBAABAgAGBQJbyVR3AAoJEMsfJm/On5mB7zgP92NONVqvIBBFRj7ohjhz4iya
 y/8ITclQvxMzgrBTuYS9avA9NACKtaerfpiS8m4XjrKAt66/x2h6yTGRVKEDTqXA
 Qs9OZG83tocBYqZ3EI3FtMhbx3eOIdCj+v34ARNqPZSXJGkpiKa+9BmjR2VuMCtG
 ONcnk66os4g7rjgsBqYUqCkAQkse/Oys6iMPpg4VfZlL6/sKWCglsQVCqplW7dFR
 wxZtJqKYHNE4sddtT67cVaxKcuNdt96EmEoJCGirH0B2wW7FPefR4sYO9cmykDi+
 J6b7VErHWSi75LrXVZaXHllkau3NvZDCoGyVbVPu98w4TzjylCXciskOmXdTQkso
 57I2aPMUa4VLde27p/a3MLUXhswFng2w62rz2l/BLlWq4KbTorPZxnKrHT8EpU7T
 eQrLC5Q+mdJCRdhcDQEcx8+SKtdO9UFLUFD5xb2D74ZJ4N2DYYFa62Vr9I6Mk+AV
 aZa5wLQW6W5UY8+AcbhK2AJE60LiPaJsuobiLLwZ/5cB2M33Hgi0ySDkq/Y4fFjA
 t/D5iWDVhbwbK15baJyJEAlNQAM+Nr284RGfWTfHhqKxmx3/fIKw5OBjsRzIP5KV
 NN5JA8s8tuLP10MIY+jXRTu2knkTKQXgWp8YLuS8gI0meCiGt2fZ8kXXW5b9T5+F
 sH7cZuCGf+PRkEeYp8o=
 =Urmz
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - Add support for trace events to hwmon core

 - Add support for NCT6797D, NCT6798D, MAX31725/6, LTM4686

 - Support all AMD Family 15h Model 6xh and Model 7xh processors in
   k10temp driver

 - Convert ina3221 driver to _info API

 - Fixes, cleanups, and improvements in various drivers

* tag 'hwmon-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (46 commits)
  hwmon: (pmbus) Fix page count auto-detection.
  hwmon: (pmbus) remove redundant 'default n' from Kconfig
  hwmon: (core) Add trace events to _attr_show/store functions
  hwmon: (ina3221) Use _info API to register hwmon device
  hwmon: (npcm-750-pwm-fan) Change initial pwm target to 255
  hwmon: (ina3221) Validate shunt resistor value from DT
  hwmon: (tmp421) make const array 'names' static
  hwmon: (core) Add hwmon_in_enable attribute
  hwmon: (ina3221) mark PM functions as __maybe_unused
  hwmon: (ina3221) Read channel input source info from DT
  dt-bindings: hwmon: Add ina3221 documentation
  hwmon: (ina3221) Add suspend and resume functions
  hwmon: (ina3221) Fix INA3221_CONFIG_MODE macros
  hwmon: (ina3221) Add INA3221_CONFIG to volatile_table
  MAINTAINERS: Update PMBUS maintainer entry
  hwmon: (pwm-fan) Set fan speed to 0 on suspend
  hwmon: (pwm-fan) Silence error on probe deferral
  hwmon: (scpi-hwmon) remove redundant continue
  hwmon: (nct6775) Add support for NCT6798D
  hwmon: (nct6775) Add support for NCT6797D
  ...
2018-10-23 00:58:12 +01:00
David S. Miller
ecd4c19f3d sparc: Validate VDSO for undefined symbols.
There should be no undefined symbols in the resulting VDSO image(s).

On sparc, fixed register usage can result in undefined symbols ending
up in the image.  To combat this, we do two things:

1) Define current_thread_info() specially when BUILD_DSO.

2) Ignore "#scratch" register undefined symbols in the output.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22 16:09:27 -07:00
David S. Miller
3c2b2d9408 sparc: Really use linker with LDFLAGS.
Rather than funneling through CC.

Also, use --hash-style=both just like other VDSO architectures and
glibc do.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22 16:02:05 -07:00
David S. Miller
5615edcca9 sparc: Improve VDSO CFLAGS.
Do not set any special register usage options, use the default which
is exactly what we should use for userspace code.

Make sure we remove the gcc plugin options from the 64-bit build.
The 32-bit cflags got it right already.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22 15:56:11 -07:00
David S. Miller
44231b7fee sparc: Set DISABLE_BRANCH_PROFILING in VDSO CFLAGS.
Not in vclock_gettime.c itself.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22 15:51:45 -07:00
David S. Miller
3fe5d7e861 sparc: Don't bother masking out TICK_PRIV_BIT in VDSO code.
If the TICK_PRIV_BIT was set, we would not be able to read the tick
register in user space, which is where this code runs.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22 15:31:38 -07:00
David S. Miller
794b88e047 sparc: Inline VDSO gettime code aggressively.
One interesting thing we need to do is stop using
__builtin_return_address() in get_vvar_data().

Simply read the %pc register instead.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22 15:27:49 -07:00
David S. Miller
2f6c9bf31a sparc: Improve VDSO instruction patching.
The current VDSO patch mechanism has several problems:

1) It assumes how gcc will emit a function, with a register
   window, an initial save instruction and then immediately
   the %tick read when compiling vread_tick().

   There is no such guarantees, code generation could change
   at any time, gcc could put a nop between the save and
   the %tick read, etc.

   So this is extremely fragile and would fail some day.

2) It disallows us to properly inline vread_tick() into the callers
   and thus get the best possible code sequences.

So fix this to patch properly, with location based annotations.

We have to be careful because we cannot do it the way we do
patches elsewhere in the kernel.  Those use a sequence like:

	1:
	insn
	.section	.whatever_patch, "ax"
	.word		1b
	replacement_insn
	.previous

This is a dynamic shared object, so that .word cannot be resolved at
build time, and thus cannot be used to execute the patches when the
kernel initializes the images.

Even trying to use label difference equations doesn't work in the
above kind of scheme:

	1:
	insn
	.section	.whatever_patch, "ax"
	.word		. - 1b
	replacement_insn
	.previous

The assembler complains that it cannot resolve that computation.
The issue is that this is contained in an executable section.

Borrow the sequence used by x86 alternatives, which is:

	1:
	insn
	.pushsection	.whatever_patch, "a"
	.word		. - 1b, . - 1f
	.popsection
	.pushsection	.whatever_patch_replacements, "ax"
	1:
	replacement_insn
	.previous

This works, allows us to inline vread_tick() as much as we like, and
can be used for arbitrary kinds of VDSO patching in the future.

Also, reverse the condition for patching.  Most systems are %stick
based, so if we only patch on %tick systems the patching code will
get little or no testing.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22 15:22:14 -07:00
Rodrigo Vivi
ac12891848 drm/i915: uncore_fw_domains_init sort platforms newer-to-older
No functional change.

Just sorting this "if" statement from newer to older platform.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-5-rodrigo.vivi@intel.com
2018-10-22 14:40:43 -07:00
Rodrigo Vivi
fb72deaefe drm/i915: power_domains_init sort platforms newer-to-older
No functional change.

Just sorting this "if" block from newer to older platform.

v2: Fix few positions (Ville)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-4-rodrigo.vivi@intel.com
2018-10-22 14:40:41 -07:00
Rodrigo Vivi
210126bd80 drm/i915: digital_port_connected sort platforms newer-to-older
Just sorting this "if" block from newer to older platform.

The main difference here is the addition of a
missing case with return false that should never occur.
And if it occurs it is better than to raise a warn
than use the icl one.

The gen >= 11 was already present in the previous logic,
although hidden.

So, in summary no real functional change.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-3-rodrigo.vivi@intel.com
2018-10-22 14:40:39 -07:00
Rodrigo Vivi
36c1f02875 drm/i915: compute_min_voltage_level sort platforms newer-to-older
No functional change.

Just sorting this "if" block from newer to older platform.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-2-rodrigo.vivi@intel.com
2018-10-22 14:40:36 -07:00
Rodrigo Vivi
fdec4df43c drm/i915: ddi_clock_get sort platforms newer-to-older.
No functional change.

Just sorting this "if" block from newer to older platform.

v2: Invert gen9_bc and gen9_lp (Ville)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-1-rodrigo.vivi@intel.com
2018-10-22 14:40:35 -07:00
Takashi Iwai
5e3cdecf78 ASoC: Updates for v5.0/v4.20
As ever there's a lot of small and driver specific changes going on
 here, but we do also have some relatively large changes in the core
 thanks to the hard work of Charles and Morimoto-san:
 
  - More component transitions from Morimoto-san, I think we're about
    finished with this.  Thanks for all the hard work!
  - Morimoto-san also added a bunch of for_each_foo macros
  - A bunch of cleanups and fixes for DAPM from Charles.
  - MCLK support for several different devices, including CS42L51, STM32
    SAI, and MAX98373.
  - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
    MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
    TI PCM3060.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNuPoTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0CsxB/91P2RgcUhBSkPO3jsFSerc+RccqD8j
 XogqjC62V2T3xqVUYtqqLf0dZFKUPFNoFitN2XdNU36H55DVI+3wxxmwObc64RIc
 uB6ptQuwFz7vGeF6r6GWFUAZ7MB518dq/oZYRKrjAW49Lt2YiCD0HJ2gi+0Hm66A
 53I7SLH3Q386UHDd+dl7+9BN7gPt0OIKAdsc/Vq7BDYvP+cNEm+YYjXGwaHjLLEC
 o8vmj8Ny6x0dytdYuQ/XuekBhGopcfqTbWTpTu43/jCd5rumQXQY2g9CC1eRMlEJ
 cm1hOjAErmKkkg2S84B1cMAvK23Szu36sPyeCphSQWOhlL4CFPVyJqic
 =9A07
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.0/v4.20

As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:

 - More component transitions from Morimoto-san, I think we're about
   finished with this.  Thanks for all the hard work!
 - Morimoto-san also added a bunch of for_each_foo macros
 - A bunch of cleanups and fixes for DAPM from Charles.
 - MCLK support for several different devices, including CS42L51, STM32
   SAI, and MAX98373.
 - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
   MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
   TI PCM3060.
2018-10-22 23:26:37 +02:00
Stefano Brivio
29edbc3ebd netfilter: ipset: Make invalid MAC address checks consistent
Set types bitmap:ipmac and hash:ipmac check that MAC addresses
are not all zeroes.

Introduce one missing check, and make the remaining ones
consistent, using is_zero_ether_addr() instead of comparing
against an array containing zeroes.

This was already done for hash:mac sets in commit 26c97c5d8d
("netfilter: ipset: Use is_zero_ether_addr instead of static and
memcmp").

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2018-10-22 23:17:04 +02:00
Stefano Brivio
8cc4ccf583 netfilter: ipset: Allow matching on destination MAC address for mac and ipmac sets
There doesn't seem to be any reason to restrict MAC address
matching to source MAC addresses in set types bitmap:ipmac,
hash:ipmac and hash:mac. With this patch, and this setup:

  ip netns add A
  ip link add veth1 type veth peer name veth2 netns A
  ip addr add 192.0.2.1/24 dev veth1
  ip -net A addr add 192.0.2.2/24 dev veth2
  ip link set veth1 up
  ip -net A link set veth2 up

  ip netns exec A ipset create test hash:mac
  dst=$(ip netns exec A cat /sys/class/net/veth2/address)
  ip netns exec A ipset add test ${dst}
  ip netns exec A iptables -P INPUT DROP
  ip netns exec A iptables -I INPUT -m set --match-set test dst -j ACCEPT

ipset will match packets based on destination MAC address:

  # ping -c1 192.0.2.2 >/dev/null
  # echo $?
  0

Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2018-10-22 23:11:21 +02:00
Evan Quan
3b2ad16dc4 drm/amd/powerplay: bump the PPtable version supported
As the matching VBIOS is already ready. Also drop the
temporary workarounds applied before.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22 14:43:02 -05:00
Evan Quan
b44ec6a3eb drm/amd/powerplay: drop highest UCLK setting after display configuration change
The UCLK is forced to highest at the start of display configuration
change. Downgrade the UCLK from highest after display configuration change.
Otherwise, we may see the UCLK stuck in the highest in some cases.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22 14:42:46 -05:00
Joseph Greathouse
f7becf9a08 drm/amd/pp: enable power limit increase in OD mode
OverDrive mode allows users to increase the maximum SCLK and MCLK
frequencies beyond the default on the GPU. However, this may not
results in large performance gains if the GPU then runs into its TDP
power limit. This patch adds the capability to increase the power
limit of a GPU above its default maximum.

This is only allowed when overdrive is enabled in the ppfeaturemask,
since this is an overdrive feature. The TDPODLimit value from the
VBIOS describes how how much higher the TDP should be allowed to go
over its default, in percentage.

v2: Moved dereference of hwmgr to after its validity check

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22 14:41:51 -05:00
David Francis
f191415b24 powerplay: Respect units on max dcfclk watermark
In a refactor, the watermark clock inputs to
powerplay from DC were changed from units of 10kHz to
kHz clocks.

One division by 100 was not converted into a division
by 1000.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22 14:41:05 -05:00
Emily Deng
91eec27ebb drm/amdgpu: Fix null pointer amdgpu_device_fw_loading
Need to check adev->powerplay.pp_funcs.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22 14:40:54 -05:00
Evan Quan
241dbbb1fb drm/amd/powerplay: error out when force clock level under auto dpm mode V2
Forcing clock level is supported under manual dpm mode only. Error out
when trying to set under manual mode. Instead of doing nothing and
reporting success.

V2: update for mclk/pcie clock level settings also

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22 14:40:30 -05:00
Dmitry Torokhov
cacd9759ee Merge branch 'next' into for-linus
Prepare input updates for 4.20 merge window.
2018-10-22 12:04:33 -07:00
Filipe Manana
9084cb6a24 Btrfs: fix use-after-free when dumping free space
We were iterating a block group's free space cache rbtree without locking
first the lock that protects it (the free_space_ctl->free_space_offset
rbtree is protected by the free_space_ctl->tree_lock spinlock).

KASAN reported an use-after-free problem when iterating such a rbtree due
to a concurrent rbtree delete:

[ 9520.359168] ==================================================================
[ 9520.359656] BUG: KASAN: use-after-free in rb_next+0x13/0x90
[ 9520.359949] Read of size 8 at addr ffff8800b7ada500 by task btrfs-transacti/1721
[ 9520.360357]
[ 9520.360530] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G             L    4.19.0-rc8-nbor #555
[ 9520.360990] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 9520.362682] Call Trace:
[ 9520.362887]  dump_stack+0xa4/0xf5
[ 9520.363146]  print_address_description+0x78/0x280
[ 9520.363412]  kasan_report+0x263/0x390
[ 9520.363650]  ? rb_next+0x13/0x90
[ 9520.363873]  __asan_load8+0x54/0x90
[ 9520.364102]  rb_next+0x13/0x90
[ 9520.364380]  btrfs_dump_free_space+0x146/0x160 [btrfs]
[ 9520.364697]  dump_space_info+0x2cd/0x310 [btrfs]
[ 9520.364997]  btrfs_reserve_extent+0x1ee/0x1f0 [btrfs]
[ 9520.365310]  __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs]
[ 9520.365646]  ? btrfs_update_time+0x180/0x180 [btrfs]
[ 9520.365923]  ? _raw_spin_unlock+0x27/0x40
[ 9520.366204]  ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs]
[ 9520.366549]  btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs]
[ 9520.366880]  cache_save_setup+0x42e/0x580 [btrfs]
[ 9520.367220]  ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs]
[ 9520.367518]  ? lock_downgrade+0x2f0/0x2f0
[ 9520.367799]  ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs]
[ 9520.368104]  ? kasan_check_read+0x11/0x20
[ 9520.368349]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.368638]  btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs]
[ 9520.368978]  ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs]
[ 9520.369282]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.369534]  ? _raw_spin_unlock+0x27/0x40
[ 9520.369811]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.370137]  commit_cowonly_roots+0x4b9/0x610 [btrfs]
[ 9520.370560]  ? commit_fs_roots+0x350/0x350 [btrfs]
[ 9520.370926]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.371285]  btrfs_commit_transaction+0x5e5/0x10e0 [btrfs]
[ 9520.371612]  ? btrfs_apply_pending_changes+0x90/0x90 [btrfs]
[ 9520.371943]  ? start_transaction+0x168/0x6c0 [btrfs]
[ 9520.372257]  transaction_kthread+0x21c/0x240 [btrfs]
[ 9520.372537]  kthread+0x1d2/0x1f0
[ 9520.372793]  ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs]
[ 9520.373090]  ? kthread_park+0xb0/0xb0
[ 9520.373329]  ret_from_fork+0x3a/0x50
[ 9520.373567]
[ 9520.373738] Allocated by task 1804:
[ 9520.373974]  kasan_kmalloc+0xff/0x180
[ 9520.374208]  kasan_slab_alloc+0x11/0x20
[ 9520.374447]  kmem_cache_alloc+0xfc/0x2d0
[ 9520.374731]  __btrfs_add_free_space+0x40/0x580 [btrfs]
[ 9520.375044]  unpin_extent_range+0x4f7/0x7a0 [btrfs]
[ 9520.375383]  btrfs_finish_extent_commit+0x15f/0x4d0 [btrfs]
[ 9520.375707]  btrfs_commit_transaction+0xb06/0x10e0 [btrfs]
[ 9520.376027]  btrfs_alloc_data_chunk_ondemand+0x237/0x5c0 [btrfs]
[ 9520.376365]  btrfs_check_data_free_space+0x81/0xd0 [btrfs]
[ 9520.376689]  btrfs_delalloc_reserve_space+0x25/0x80 [btrfs]
[ 9520.377018]  btrfs_direct_IO+0x42e/0x6d0 [btrfs]
[ 9520.377284]  generic_file_direct_write+0x11e/0x220
[ 9520.377587]  btrfs_file_write_iter+0x472/0xac0 [btrfs]
[ 9520.377875]  aio_write+0x25c/0x360
[ 9520.378106]  io_submit_one+0xaa0/0xdc0
[ 9520.378343]  __se_sys_io_submit+0xfa/0x2f0
[ 9520.378589]  __x64_sys_io_submit+0x43/0x50
[ 9520.378840]  do_syscall_64+0x7d/0x240
[ 9520.379081]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 9520.379387]
[ 9520.379557] Freed by task 1802:
[ 9520.379782]  __kasan_slab_free+0x173/0x260
[ 9520.380028]  kasan_slab_free+0xe/0x10
[ 9520.380262]  kmem_cache_free+0xc1/0x2c0
[ 9520.380544]  btrfs_find_space_for_alloc+0x4cd/0x4e0 [btrfs]
[ 9520.380866]  find_free_extent+0xa99/0x17e0 [btrfs]
[ 9520.381166]  btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
[ 9520.381474]  btrfs_get_blocks_direct+0x60b/0xbd0 [btrfs]
[ 9520.381761]  __blockdev_direct_IO+0x10ee/0x58a1
[ 9520.382059]  btrfs_direct_IO+0x25a/0x6d0 [btrfs]
[ 9520.382321]  generic_file_direct_write+0x11e/0x220
[ 9520.382623]  btrfs_file_write_iter+0x472/0xac0 [btrfs]
[ 9520.382904]  aio_write+0x25c/0x360
[ 9520.383172]  io_submit_one+0xaa0/0xdc0
[ 9520.383416]  __se_sys_io_submit+0xfa/0x2f0
[ 9520.383678]  __x64_sys_io_submit+0x43/0x50
[ 9520.383927]  do_syscall_64+0x7d/0x240
[ 9520.384165]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 9520.384439]
[ 9520.384610] The buggy address belongs to the object at ffff8800b7ada500
                which belongs to the cache btrfs_free_space of size 72
[ 9520.385175] The buggy address is located 0 bytes inside of
                72-byte region [ffff8800b7ada500, ffff8800b7ada548)
[ 9520.385691] The buggy address belongs to the page:
[ 9520.385957] page:ffffea0002deb680 count:1 mapcount:0 mapping:ffff880108a1d700 index:0x0 compound_mapcount: 0
[ 9520.388030] flags: 0x8100(slab|head)
[ 9520.388281] raw: 0000000000008100 ffffea0002deb608 ffffea0002728808 ffff880108a1d700
[ 9520.388722] raw: 0000000000000000 0000000000130013 00000001ffffffff 0000000000000000
[ 9520.389169] page dumped because: kasan: bad access detected
[ 9520.389473]
[ 9520.389658] Memory state around the buggy address:
[ 9520.389943]  ffff8800b7ada400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.390368]  ffff8800b7ada480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.390796] >ffff8800b7ada500: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc
[ 9520.391223]                    ^
[ 9520.391461]  ffff8800b7ada580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.391885]  ffff8800b7ada600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.392313] ==================================================================
[ 9520.392772] BTRFS critical (device vdc): entry offset 2258497536, bytes 131072, bitmap no
[ 9520.393247] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011
[ 9520.393705] PGD 800000010dbab067 P4D 800000010dbab067 PUD 107551067 PMD 0
[ 9520.394059] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 9520.394378] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G    B        L    4.19.0-rc8-nbor #555
[ 9520.394858] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 9520.395350] RIP: 0010:rb_next+0x3c/0x90
[ 9520.396461] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292
[ 9520.396762] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c
[ 9520.397115] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011
[ 9520.397468] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc
[ 9520.397821] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000
[ 9520.398188] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000
[ 9520.398555] FS:  0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000
[ 9520.399007] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9520.399335] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0
[ 9520.399679] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9520.400023] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9520.400400] Call Trace:
[ 9520.400648]  btrfs_dump_free_space+0x146/0x160 [btrfs]
[ 9520.400974]  dump_space_info+0x2cd/0x310 [btrfs]
[ 9520.401287]  btrfs_reserve_extent+0x1ee/0x1f0 [btrfs]
[ 9520.401609]  __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs]
[ 9520.401952]  ? btrfs_update_time+0x180/0x180 [btrfs]
[ 9520.402232]  ? _raw_spin_unlock+0x27/0x40
[ 9520.402522]  ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs]
[ 9520.402882]  btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs]
[ 9520.403261]  cache_save_setup+0x42e/0x580 [btrfs]
[ 9520.403570]  ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs]
[ 9520.403871]  ? lock_downgrade+0x2f0/0x2f0
[ 9520.404161]  ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs]
[ 9520.404481]  ? kasan_check_read+0x11/0x20
[ 9520.404732]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.405026]  btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs]
[ 9520.405375]  ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs]
[ 9520.405694]  ? do_raw_spin_unlock+0xa8/0x140
[ 9520.405958]  ? _raw_spin_unlock+0x27/0x40
[ 9520.406243]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.406574]  commit_cowonly_roots+0x4b9/0x610 [btrfs]
[ 9520.406899]  ? commit_fs_roots+0x350/0x350 [btrfs]
[ 9520.407253]  ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.407589]  btrfs_commit_transaction+0x5e5/0x10e0 [btrfs]
[ 9520.407925]  ? btrfs_apply_pending_changes+0x90/0x90 [btrfs]
[ 9520.408262]  ? start_transaction+0x168/0x6c0 [btrfs]
[ 9520.408582]  transaction_kthread+0x21c/0x240 [btrfs]
[ 9520.408870]  kthread+0x1d2/0x1f0
[ 9520.409138]  ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs]
[ 9520.409440]  ? kthread_park+0xb0/0xb0
[ 9520.409682]  ret_from_fork+0x3a/0x50
[ 9520.410508] Dumping ftrace buffer:
[ 9520.410764]    (ftrace buffer empty)
[ 9520.411007] CR2: 0000000000000011
[ 9520.411297] ---[ end trace 01a0863445cf360a ]---
[ 9520.411568] RIP: 0010:rb_next+0x3c/0x90
[ 9520.412644] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292
[ 9520.412932] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c
[ 9520.413274] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011
[ 9520.413616] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc
[ 9520.414007] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000
[ 9520.414349] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000
[ 9520.416074] FS:  0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000
[ 9520.416536] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9520.416848] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0
[ 9520.418477] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9520.418846] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9520.419204] Kernel panic - not syncing: Fatal exception
[ 9520.419666] Dumping ftrace buffer:
[ 9520.419930]    (ftrace buffer empty)
[ 9520.420168] Kernel Offset: disabled
[ 9520.420406] ---[ end Kernel panic - not syncing: Fatal exception ]---

Fix this by acquiring the respective lock before iterating the rbtree.

Reported-by: Nikolay Borisov <nborisov@suse.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-10-22 20:31:22 +02:00
Nathan Chancellor
ef0f02fd69 rtc: s35390a: Change buf's type to u8 in s35390a_init
Clang warns:

drivers/rtc/rtc-s35390a.c:124:27: warning: implicit conversion from
'int' to 'char' changes value from 192 to -64 [-Wconstant-conversion]
        buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
            ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
1 warning generated.

Update buf to be an unsigned 8-bit integer, which matches the buf member
in struct i2c_msg.

https://github.com/ClangBuiltLinux/linux/issues/145
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-10-22 19:29:43 +02:00
Adrian Hunter
3e71c70c94 perf scripts python: call-graph-from-sql.py: Use SPDX license identifier
Use SPDX license identifier in call-graph-from-sql.py.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-22 14:28:04 -03:00
Arnaldo Carvalho de Melo
a9c5e6c1e9 perf trace: Introduce per-event maximum number of events property
Call it 'nr', as in this context it should be expressive enough, i.e.:

  # perf trace -e sched:*waking/nr=8,call-graph=fp/
     0.000 :0/0 sched:sched_waking:comm=rcu_sched pid=10 prio=120 target_cpu=001
                                       try_to_wake_up ([kernel.kallsyms])
                                       sched_clock ([kernel.kallsyms])
     3.933 :0/0 sched:sched_waking:comm=rcu_sched pid=10 prio=120 target_cpu=001
                                       try_to_wake_up ([kernel.kallsyms])
                                       sched_clock ([kernel.kallsyms])
     3.970 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
                                       try_to_wake_up ([kernel.kallsyms])
                                       __libc_write (/usr/lib64/libpthread-2.26.so)
    20.069 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
                                       try_to_wake_up ([kernel.kallsyms])
                                       __libc_write (/usr/lib64/libpthread-2.26.so)
    37.170 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
                                       try_to_wake_up ([kernel.kallsyms])
                                       __libc_write (/usr/lib64/libpthread-2.26.so)
    53.267 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
                                       try_to_wake_up ([kernel.kallsyms])
                                       __libc_write (/usr/lib64/libpthread-2.26.so)
    70.365 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
                                       try_to_wake_up ([kernel.kallsyms])
                                       __libc_write (/usr/lib64/libpthread-2.26.so)
    75.781 Web Content/3649 sched:sched_waking:comm=JS Helper pid=3670 prio=120 target_cpu=000
                                       try_to_wake_up ([kernel.kallsyms])
                                       try_to_wake_up ([kernel.kallsyms])
                                       wake_up_q ([kernel.kallsyms])
                                       futex_wake ([kernel.kallsyms])
                                       do_futex ([kernel.kallsyms])
                                       __x64_sys_futex ([kernel.kallsyms])
                                       do_syscall_64 ([kernel.kallsyms])
                                       entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
                                       pthread_cond_signal@@GLIBC_2.3.2 (/usr/lib64/libpthread-2.26.so)
  #

  # perf trace -e sched:*switch/nr=2/,block:*_plug/nr=4/,block:*_unplug/nr=1/,net:*dev_queue/nr=3,max-stack=16/
     0.000 :0/0 sched:sched_switch:swapper/0:0 [120] S ==> trace:3367 [120]
     0.046 :0/0 sched:sched_switch:swapper/1:0 [120] S ==> kworker/u16:58:2722 [120]
   570.670 irq/50-iwlwifi/680 net:net_dev_queue:dev=wlp3s0 skbaddr=0xffff93498051ef00 len=66
                                       __dev_queue_xmit ([kernel.kallsyms])
  1106.141 jbd2/dm-0-8/476 block:block_plug:[jbd2/dm-0-8]
  1106.175 jbd2/dm-0-8/476 block:block_unplug:[jbd2/dm-0-8] 1
  1618.088 kworker/u16:30/2694 block:block_plug:[kworker/u16:30]
  1810.000 :0/0 net:net_dev_queue:dev=vnet0 skbaddr=0xffff93498051ef00 len=52
                                       __dev_queue_xmit ([kernel.kallsyms])
  3857.974 :0/0 net:net_dev_queue:dev=vnet0 skbaddr=0xffff93498051f900 len=52
                                       __dev_queue_xmit ([kernel.kallsyms])
  4790.277 jbd2/dm-2-8/748 block:block_plug:[jbd2/dm-2-8]
  4790.448 jbd2/dm-2-8/748 block:block_plug:[jbd2/dm-2-8]
  #

The global --max-events has precendence:

  # trace --max-events 3 -e sched:*switch/nr=2/,block:*_plug/nr=4/,block:*_unplug/nr=1/,net:*dev_queue/nr=3,max-stack=16/
     0.000 :0/0 sched:sched_switch:swapper/0:0 [120] S ==> qemu-system-x86:2252 [120]
     0.029 qemu-system-x8/2252 sched:sched_switch:qemu-system-x86:2252 [120] D ==> swapper/0:0 [120]
    58.047 DNS Res~er #14/31661 net:net_dev_queue:dev=wlp3s0 skbaddr=0xffff9346966af100 len=84
                                       __dev_queue_xmit ([kernel.kallsyms])
                                       __libc_send (/usr/lib64/libpthread-2.26.so)
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-s4jswltvh660ughvg9nwngah@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-22 14:27:12 -03:00
Milian Wolff
7ee40678af perf script: Flush output stream after events in verbose mode
When the perf script output is written to a terminal stream, the normal
output of `perf script` would get buffered, but its debug output would
be written directly. This made it quite hard to figure out where a given
debug output is coming from.

We can improve on this by flushing the output buffer after processing an
event. To see the value, compare the following output for a `perf script
-v` run:

Before this patch:
```
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
... lots and lots of verbose debug output
cpp-inlining 24617 90229.122036534:          1 cycles:uppp:
            7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)

cpp-inlining 24617 90229.122043974:          1 cycles:uppp:
            7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
...
```

After this patch:
```
...
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
cpp-inlining 24617 90229.122036534:          1 cycles:uppp:
            7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)

unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
cpp-inlining 24617 90229.122043974:          1 cycles:uppp:
            7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
...
```

This new output format makes it much easier to use perf script output
for debugging purposes, e.g. to investigate broken dwarf unwinding.

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181021191424.16183-2-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-22 14:27:11 -03:00