[ Upstream commit 68f5ef7eeb ]
gs101 I/O coherency shareability bits differ from exynosauto SoC. To
support both SoCs move this info the SoC drvdata.
Currently both the value and mask are the same for both gs101 and
exynosauto, thus we use the same value.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-2-96722cc2ba1b@linaro.org
Fixes: d11e0a318d ("scsi: ufs: exynos: Add support for Tensor gs101 SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cc4a4a576 ]
Factor out the common code into a new exynos_ufs_shareability() function
and provide a dedicated gs101_drv_init() hook.
This allows us to enable WriteBooster capability (UFSHCD_CAP_WB_EN) in a
way that doesn't effect other SoCs supported in this driver.
WriteBooster improves write speeds by enabling a pseudo SLC cache. Using
the 'fio seqwrite' test we can achieve speeds of 945MB/s with this
feature enabled (until the cache is exhausted) before dropping back to
~260MB/s (which are the speeds we see without the WriteBooster feature
enabled).
Assuming the UFSHCD_CAP_WB_EN capability is set by the host then
WriteBooster can also be enabled and disabled via sysfs so it is
possible for the system to only enable it when extra write performance
is required.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-10-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 68f5ef7eeb ("scsi: ufs: exynos: Move UFS shareability value to drvdata")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afd613ca2c ]
The pointer to device can be obtained from ufs->hba->dev, remove
superfluous function parameter.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-3-peter.griffin@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 68f5ef7eeb ("scsi: ufs: exynos: Move UFS shareability value to drvdata")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07c2a73750 ]
Remove empty method. When the method is not set, the call is not made,
saving a few cycles.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-2-peter.griffin@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 68f5ef7eeb ("scsi: ufs: exynos: Move UFS shareability value to drvdata")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21a4e47578 ]
Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is
referenced when ksmbd server thread terminates, It will not be freed,
but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed
asynchronously when the connection is disconnected. __smb2_lease_break_noti
calls ksmbd_conn_write, which can cause use-after-free
when conn->ksmbd_transport is already freed.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2d99376c5 ]
ksmbd.mount will give each interfaces list and bind_interfaces_only flags
to ksmbd server. Previously, the interfaces list was sent only
when bind_interfaces_only was enabled.
ksmbd server browse only interfaces list given from ksmbd.conf on
FSCTL_QUERY_INTERFACE_INFO IOCTL.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 21a4e47578 ("ksmbd: fix use-after-free in __smb2_lease_break_noti()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0066f623bc ]
Prefer to report ENOMEM rather than incur the oom for allocations in
ksmbd. __GFP_NORETRY could not achieve that, It would fail the allocations
just too easily. __GFP_RETRY_MAYFAIL will keep retrying the allocation
until there is no more progress and fail the allocation instead go OOM
and let the caller to deal with it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 21a4e47578 ("ksmbd: fix use-after-free in __smb2_lease_break_noti()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c2b75404d ]
Fix the frequency returned to the user space by
the DRM_IVPU_PARAM_CORE_CLOCK_RATE GET_PARAM IOCTL.
The kernel driver returned CPU frequency for MTL and bare
PLL frequency for LNL - this was inconsistent and incorrect
for both platforms. With this fix the driver returns maximum
frequency of the NPU data processing unit (DPU) for all HW
generations. This is what user space always expected.
Also do not set CPU frequency in boot params - the firmware
does not use frequency passed from the driver, it was only
used by the early pre-production firmware.
With that we can remove CPU frequency calculation code.
Show NPU frequency in FREQ_CHANGE interrupt when frequency
tracking is enabled.
Fixes: 8a27ad81f7 ("accel/ivpu: Split IP and buttress code")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155912.4049340-2-maciej.falkowski@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 436b67d693 ]
Add ivpu_fw_sched_mode_select() function that can select scheduling mode
based on HW and FW versions. This prepares for a switch to HWS on
selected platforms.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-17-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Stable-dep-of: 6c2b75404d ("accel/ivpu: Fix the NPU's DPU frequency calculation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf761e3dac ]
Commit 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.
This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.
Add an optional early writel() in msix_prepare_msi_desc().
Fixes: 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ece3e8e59 ]
The conversion of the XEN specific global variable pci_msi_ignore_mask to a
MSI domain flag, missed the facts that:
1) Legacy architectures do not provide a interrupt domain
2) Parent MSI domains do not necessarily have a domain info attached
Both cases result in an unconditional NULL pointer dereference. This was
unfortunatly missed in review and testing revealed it late.
Cure this by using the existing pci_msi_domain_supports() helper, which
handles all possible cases correctly.
Fixes: c3164d2e0d ("PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag")
Reported-by: Daniel Gomez <da.gomez@kernel.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Daniel Gomez <da.gomez@kernel.org>
Link: https://lore.kernel.org/all/87iknwyp2o.ffs@tglx
Closes: https://lore.kernel.org/all/qn7fzggcj6qe6r6gdbwcz23pzdz2jx64aldccmsuheabhmjgrt@tawf5nfwuvw7
Stable-dep-of: cf761e3dac ("PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3164d2e0d ]
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: cf761e3dac ("PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ded40f32b5 ]
The driver leaks the device reference taken with
of_find_device_by_node(). Fix the leak by using devm_of_qcom_ice_get().
Fixes: 56541c7c44 ("scsi: ufs: ufs-qcom: Switch to the new ICE API")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250117-qcom-ice-fix-dev-leak-v2-3-1ffa5b6884cb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a46a080563 ]
In of_resolve_phandles(), refcount of device node @local_fixups will be
increased if the for_each_child_of_node() exits early, but nowhere to
decrease the refcount, so cause refcount leakage for the node.
Fix by using __free() on @local_fixups.
Fixes: da56d04c80 ("of/resolver: Switch to new local fixups format.")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-9-93e3a2659aa7@quicinc.com
[robh: Use __free() instead]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5275e8b529 ]
Use the __free() cleanup to simplify of_resolve_phandles() and remove
all the goto's.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: a46a080563 ("of: resolver: Fix device node refcount leakage in of_resolve_phandles()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38e7f9092e ]
Commit under Fixes added the 'idle-states' property for SERDES4 lane muxes
without defining the corresponding register offsets and masks for it in the
'mux-reg-masks' property within the 'serdes_ln_ctrl' node.
Fix this.
Fixes: 7287d423f1 ("arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250228053850.506028-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8236644f5e ]
The ad7768-1 ADC output code is two's complement, meaning that the voltage
conversion result is a signed value.. Since the value is a 24 bit one,
stored in a 32 bit variable, the sign should be extended in order to get
the correct representation.
Also the channel description has been updated to signed representation,
to match the ADC specifications.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/505994d3b71c2aa38ba714d909a68e021f12124c.1741268122.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af1c801a1 ]
The data used is all in local variables so there is no advantage
in setting *val = ret with the direct mode claim held.
Move it later to after error check.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250217141630.897334-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 8236644f5e ("iio: adc: ad7768-1: Fix conversion result sign")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9a457722c ]
The VTU registers of the 6320 family use the 6352 semantics, not 6185.
Fix it.
Fixes: b8fee95710 ("net: dsa: mv88e6xxx: add VLAN Get Next support")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: <stable@vger.kernel.org> # 5.15.x
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-2-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc0e982b8a ]
Make sure ->nr_integrity_segments is cloned in blk_rq_prep_clone(),
otherwise requests cloned by device-mapper multipath will not have the
proper nr_integrity_segments values set, then BUG() is hit from
sg_alloc_table_chained().
Fixes: b0fd271d5f ("block: add request clone interface (v2)")
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250310115453.2271109-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6975c1a486 ]
The request ioprio is only initialized from the first attached bio,
so requests without a bio already never set it. Directly use the
bio field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241112170050.1612998-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: fc0e982b8a ("block: make sure ->nr_integrity_segments is cloned in blk_rq_prep_clone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61952bb734 ]
The write_hint is only used for read/write requests, which must have a
bio attached to them. Just use the bio field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241112170050.1612998-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: fc0e982b8a ("block: make sure ->nr_integrity_segments is cloned in blk_rq_prep_clone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebf185efad ]
The driver might skip the ov08x40_identify_module() on probe() based on
the acpi_dev_state_d0() check done in probe().
If the ov08x40_identify_module() call is skipped on probe() it should
be done on the first stream start. Add the missing call.
Note ov08x40_identify_module() will only do something on its first call,
subsequent calls are no-ops.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes: b1a42fde6e ("media: ov08x40: Avoid sensor probing in D0 state")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a39639e44 ]
Move the ov08x40_identify_module() function to above ov08x40_set_stream()
this is a preparation patch for adding a missing ov08x40_identify_module()
call to ov08x40_set_stream().
No functional changes, just moving code around.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: ebf185efad ("media: ov08x40: Add missing ov08x40_identify_module() call on stream-start")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acc294519f ]
The driver defines IMX214_DEFAULT_LINK_FREQ 480000000, and then
IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10),
which works out as 384MPix/s. (The 8 is 4 lanes and DDR.)
Parsing the PLL registers with the defined 24MHz input. We're in single
PLL mode, so MIPI frequency is directly linked to pixel rate. VTCK ends
up being 1200MHz, and VTPXCK and OPPXCK both are 120MHz. Section 5.3
"Frame rate calculation formula" says "Pixel rate
[pixels/s] = VTPXCK [MHz] * 4", so 120 * 4 = 480MPix/s, which basically
agrees with my number above.
3.1.4. MIPI global timing setting says "Output bitrate = OPPXCK * reg
0x113[7:0]", so 120MHz * 10, or 1200Mbit/s. That would be a link
frequency of 600MHz due to DDR.
That also matches to 480MPix/s * 10bpp / 4 lanes / 2 for DDR.
Keep the previous link frequency for backward compatibility.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Fixes: 4361905962 ("media: imx214: Add imx214 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d55f4eb03 ]
The imx214 camera is capable of either two-lane or four-lane operation.
Currently only the four-lane mode is supported, as proper pixel rates
and link frequences for the two-lane mode are unknown.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: acc294519f ("media: i2c: imx214: Fix link frequency validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 341a133beb ]
Define macros for all the known registers used in the register arrays,
and use them to replace the numerical addresses. This improves
readability.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: acc294519f ("media: i2c: imx214: Fix link frequency validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f0aeba4f1 ]
Use the new common CCI register access helpers to replace the private
register access helpers in the imx214 driver. This simplifies the driver
by reducing the amount of code.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: acc294519f ("media: i2c: imx214: Fix link frequency validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d6dc133e6 ]
Error handling in probe() can be a bit simpler with dev_err_probe().
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: acc294519f ("media: i2c: imx214: Fix link frequency validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6832ff659 ]
Port the imx214 sensor driver to use the subdev active state.
Move all the format configuration to the subdevice state and simplify
the format handling, locking and initialization.
While at it, simplify imx214_start_streaming() by removing unneeded goto
statements and the corresponding error label.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: acc294519f ("media: i2c: imx214: Fix link frequency validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1618f635bd ]
The callback function of call_rcu() just calls kfree(), so use
kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20250218082021.2766-1-lirongqing@baidu.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 3ee7be9e10 ("PM: EM: Address RCU-related sparse warnings")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbef7442fb ]
The driver leaks the device reference taken with
of_find_device_by_node(). Fix the leak by using devm_of_qcom_ice_get().
Fixes: c7eed31e23 ("mmc: sdhci-msm: Switch to the new ICE API")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250117-qcom-ice-fix-dev-leak-v2-2-1ffa5b6884cb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c13d6060d ]
Callers of of_qcom_ice_get() leak the device reference taken by
of_find_device_by_node(). Introduce devm variant for of_qcom_ice_get().
Existing consumers need the ICE instance for the entire life of their
device, thus exporting qcom_ice_put() is not required.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250117-qcom-ice-fix-dev-leak-v2-1-1ffa5b6884cb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: cbef7442fb ("mmc: sdhci-msm: fix dev reference leaked through of_qcom_ice_get")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b0449544c ]
Syzkaller reports a bug as follows:
Injecting memory failure for pfn 0x18b00e at process virtual address 0x20ffd000
Memory failure: 0x18b00e: dirty swapcache page still referenced by 2 users
Memory failure: 0x18b00e: recovery action for dirty swapcache page: Failed
page: refcount:2 mapcount:0 mapping:0000000000000000 index:0x20ffd pfn:0x18b00e
memcg:ffff0000dd6d9000
anon flags: 0x5ffffe00482011(locked|dirty|arch_1|swapbacked|hwpoison|node=0|zone=2|lastcpupid=0xfffff)
raw: 005ffffe00482011 dead000000000100 dead000000000122 ffff0000e232a7c9
raw: 0000000000020ffd 0000000000000000 00000002ffffffff ffff0000dd6d9000
page dumped because: VM_BUG_ON_FOLIO(!folio_test_uptodate(folio))
------------[ cut here ]------------
kernel BUG at mm/swap_state.c:184!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Modules linked in:
CPU: 0 PID: 60 Comm: kswapd0 Not tainted 6.6.0-gcb097e7de84e #3
Hardware name: linux,dummy-virt (DT)
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : add_to_swap+0xbc/0x158
lr : add_to_swap+0xbc/0x158
sp : ffff800087f37340
x29: ffff800087f37340 x28: fffffc00052c0380 x27: ffff800087f37780
x26: ffff800087f37490 x25: ffff800087f37c78 x24: ffff800087f377a0
x23: ffff800087f37c50 x22: 0000000000000000 x21: fffffc00052c03b4
x20: 0000000000000000 x19: fffffc00052c0380 x18: 0000000000000000
x17: 296f696c6f662865 x16: 7461646f7470755f x15: 747365745f6f696c
x14: 6f6621284f494c4f x13: 0000000000000001 x12: ffff600036d8b97b
x11: 1fffe00036d8b97a x10: ffff600036d8b97a x9 : dfff800000000000
x8 : 00009fffc9274686 x7 : ffff0001b6c5cbd3 x6 : 0000000000000001
x5 : ffff0000c25896c0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffff0000c25896c0 x0 : 0000000000000000
Call trace:
add_to_swap+0xbc/0x158
shrink_folio_list+0x12ac/0x2648
shrink_inactive_list+0x318/0x948
shrink_lruvec+0x450/0x720
shrink_node_memcgs+0x280/0x4a8
shrink_node+0x128/0x978
balance_pgdat+0x4f0/0xb20
kswapd+0x228/0x438
kthread+0x214/0x230
ret_from_fork+0x10/0x20
I can reproduce this issue with the following steps:
1) When a dirty swapcache page is isolated by reclaim process and the
page isn't locked, inject memory failure for the page.
me_swapcache_dirty() clears uptodate flag and tries to delete from lru,
but fails. Reclaim process will put the hwpoisoned page back to lru.
2) The process that maps the hwpoisoned page exits, the page is deleted
the page will never be freed and will be in the lru forever.
3) If we trigger a reclaim again and tries to reclaim the page,
add_to_swap() will trigger VM_BUG_ON_FOLIO due to the uptodate flag is
cleared.
To fix it, skip the hwpoisoned page in shrink_folio_list(). Besides, the
hwpoison folio may not be unmapped by hwpoison_user_mappings() yet, unmap
it in shrink_folio_list(), otherwise the folio will fail to be unmaped by
hwpoison_user_mappings() since the folio isn't in lru list.
Link: https://lkml.kernel.org/r/20250318083939.987651-3-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger,kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea8d7647f9 ]
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
Link: https://lore.kernel.org/all/bcba4d76-2c3f-4d11-baf0-02905db953dd@oracle.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5013f454a3 ("tracing: Add check of trace event print fmts for dereferencing pointers")
Link: https://lore.kernel.org/20250327195311.2d89ec66@gandalf.local.home
Reported-by: Libo Chen <libo.chen@oracle.com>
Reviewed-by: Libo Chen <libo.chen@oracle.com>
Tested-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e52750fb14 ]
When printing a dynamic array in a trace event, the method is rather ugly.
It has the format of:
__print_array(__get_dynamic_array(array),
__get_dynmaic_array_len(array) / el_size, el_size)
Since dynamic arrays are known to the tracing infrastructure, create a
helper macro that does the above for you.
__print_dynamic_array(array, el_size)
Which would expand to the same output.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20241022194158.110073-3-avadhut.naik@amd.com
Stable-dep-of: ea8d7647f9 ("tracing: Verify event formats that have "%*p.."")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f3b93547b9 upstream.
Switch away from using sha1 for module signing by default and use the
more modern sha512 instead, which is what among others Arch, Fedora,
RHEL, and Ubuntu are currently using for their kernels.
Sha1 has not been considered secure against well-funded opponents since
2005[1]; since 2011 the NIST and other organizations furthermore
recommended its replacement[2]. This is why OpenSSL on RHEL9, Fedora
Linux 41+[3], and likely some other current and future distributions
reject the creation of sha1 signatures, which leads to a build error of
allmodconfig configurations:
80A20474797F0000:error:03000098:digital envelope routines:do_sigver_init:invalid digest:crypto/evp/m_sigver.c:342:
make[4]: *** [.../certs/Makefile:53: certs/signing_key.pem] Error 1
make[4]: *** Deleting file 'certs/signing_key.pem'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [.../scripts/Makefile.build:478: certs] Error 2
make[2]: *** [.../Makefile:1936: .] Error 2
make[1]: *** [.../Makefile:224: __sub-make] Error 2
make[1]: Leaving directory '...'
make: *** [Makefile:224: __sub-make] Error 2
This change makes allmodconfig work again and sets a default that is
more appropriate for current and future users, too.
Link: https://www.schneier.com/blog/archives/2005/02/cryptanalysis_o.html [1]
Link: https://csrc.nist.gov/projects/hash-functions [2]
Link: https://fedoraproject.org/wiki/Changes/OpenSSLDistrustsha1SigVer [3]
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: kdevops <kdevops@lists.linux.dev> [0]
Link: https://github.com/linux-kdevops/linux-modules-kpd/actions/runs/11420092929/job/31775404330 [0]
Link: https://lore.kernel.org/r/52ee32c0c92afc4d3263cea1f8a1cdc809728aff.1729088288.git.linux@leemhuis.info
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 957860cbc1 upstream.
A previous commit changed how requests are linked in the plug structure,
but unlike the previous method, it uses a new type for it rather than
struct request. The latter is available even for !CONFIG_BLOCK, while
struct rq_list is now. Move it outside CONFIG_BLOCK.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: a3396b9999 ("block: add a rq_list type")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04789af756 upstream.
Extend changes_pkt_data tests with test cases freplacing the main
program that does not have subprograms. Try four combinations when
both main program and replacement do and do not change packet data.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac6542ad92 upstream.
bpf_prog_aux->func field might be NULL if program does not have
subprograms except for main sub-program. The fixed commit does
bpf_prog_aux->func access unconditionally, which might lead to null
pointer dereference.
The bug could be triggered by replacing the following BPF program:
SEC("tc")
int main_changes(struct __sk_buff *sk)
{
bpf_skb_pull_data(sk, 0);
return 0;
}
With the following BPF program:
SEC("freplace")
long changes_pkt_data(struct __sk_buff *sk)
{
return bpf_skb_pull_data(sk, 0);
}
bpf_prog_aux instance itself represents the main sub-program,
use this property to fix the bug.
Fixes: 81f6d0530b ("bpf: check changes_pkt_data property for extension programs")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412111822.qGw6tOyB-lkp@intel.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9706b56e1 upstream.
Add a test case with a tail call done from a global sub-program. Such
tails calls should be considered as invalidating packet pointers.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89ff40890d upstream.
Try different combinations of global functions replacement:
- replace function that changes packet data with one that doesn't;
- replace function that changes packet data with one that does;
- replace function that doesn't change packet data with one that does;
- replace function that doesn't change packet data with one that doesn't;
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81f6d0530b upstream.
When processing calls to global sub-programs, verifier decides whether
to invalidate all packet pointers in current state depending on the
changes_pkt_data property of the global sub-program.
Because of this, an extension program replacing a global sub-program
must be compatible with changes_pkt_data property of the sub-program
being replaced.
This commit:
- adds changes_pkt_data flag to struct bpf_prog_aux:
- this flag is set in check_cfg() for main sub-program;
- in jit_subprogs() for other sub-programs;
- modifies bpf_check_attach_btf_id() to check changes_pkt_data flag;
- moves call to check_attach_btf_id() after the call to check_cfg(),
because it needs changes_pkt_data flag to be set:
bpf_check:
... ...
- check_attach_btf_id resolve_pseudo_ldimm64
resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded
bpf_prog_is_offloaded check_cfg
check_cfg + check_attach_btf_id
... ...
The following fields are set by check_attach_btf_id():
- env->ops
- prog->aux->attach_btf_trace
- prog->aux->attach_func_name
- prog->aux->attach_func_proto
- prog->aux->dst_trampoline
- prog->aux->mod
- prog->aux->saved_dst_attach_type
- prog->aux->saved_dst_prog_type
- prog->expected_attach_type
Neither of these fields are used by resolve_pseudo_ldimm64() or
bpf_prog_offload_verifier_prep() (for netronome and netdevsim
drivers), so the reordering is safe.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ shung-hsi.yu: both jits_use_priv_stack and priv_stack_requested fields are
missing from context because "bpf: Support private stack for bpf progs" series
is not present.]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51081a3f25 upstream.
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation.
Reported-by: Nick Zavaritsky <mejedi@gmail.com>
Closes: https://lore.kernel.org/bpf/0498CA22-5779-4767-9C0C-A9515CEA711F@gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27e88bc4df upstream.
Add a utility function, looking for a subprogram containing a given
instruction index, rewrite find_subprog() to use this function.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
