Move memory region reserved for the GPU to its proper place in DT.
Fixes: 6e9612ced0 ("arm64: dts: qcom: sc8280xp: create common zap-shader node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-iris-sc8280xp-v7-2-2e21f6db1897@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device node for the EVA clock controller (evacc) for Qualcomm
Glymur SoC. This clock controller provides clocks and resets to the
EVA hardware block.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260617-evacc_glymur-v2-4-905108dacaaa@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device tree bindings for the enhanced video analytics(EVA) clock
controller which is required on Qualcomm Glymur SoC. The controller
provides clocks, resets and power domains for the EVA subsystem.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260617-evacc_glymur-v2-2-905108dacaaa@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Glymur SoC has two distinct core types within the same Oryon
microarchitecture generation:
- qcom,oryon-2-2 (cpu0-cpu5, cluster 0)
- qcom,oryon-2-1 (cpu6-cpu11, cluster 1; cpu12-cpu17, cluster 2)
Without capacity-dmips-mhz the Energy Aware Scheduler treats all 18
cores as equal, leading to suboptimal task placement and frequency
selection. In particular, heavy tasks may be pinned to cluster 0 driving
them to maximum frequency/voltage while cluster 1/2 sit idle.
Fix this by using distinct capacity-dmips-mhz numbers.
Values are derived from DPC (DMIPS-per-clock) measurements at the
825.6 MHz nominal operating point:
oryon-2-2: 1024 (normalised baseline)
oryon-2-1: 1372 (ratio ~1.34x vs oryon-2-2)
Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260706-add-cpu-capacity-dmips-mhz-v1-1-85deced44b20@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the sound card of Glymur-crd board with the routing for speakers.
Add device nodes for the sound support with WSA884x smart speakers
and playback via speakers and recording via DMIC microphones.
Co-developed-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260706064224.1328576-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The touchscreen module on Glymur/Mahua CRDs is different from the one
used on Hamoa CRDs and requires the reset-gpios to be wired to the device.
Without this in place the reset line will remain permanently asserted
during resume leaving the device offline and causing all I2C transactions
to fail with -ENXIO.
Error Logs:
i2c_hid_of 3-0038: failed to change power setting.
i2c_hid_of 3-0038: PM: dpm_run_callback(): i2c_hid_core_pm_resume [i2c_hid] returns -6
i2c_hid_of 3-0038: PM: failed to resume async: error -6
Add the reset GPIO so the driver can deassert the line on resume,
restoring I2C communication with the device.
Fixes: e6bf559f7e ("arm64: dts: qcom: glymur-crd: Enable keyboard, trackpad and touchscreen")
Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260522-arm64-dts-glymur-crd-add-reset-gpio-to-touchscreen-v1-1-c7653924acdc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
usb_mp_qmpphy0 and usb_mp_qmpphy1 have #clock-cells set to 0 so they take
no specifier. Drop the erroneous QMP_USB43DP_USB3_PIPE_CLK argument.
This fixes the following dtbs_check warning:
clock-controller@100000 (qcom,glymur-gcc): clocks: [[59, 0], ..... [0]]
is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,glymur-gcc.yaml
Fixes: 4eee57dd4d ("arm64: dts: qcom: glymur: Add USB related nodes")
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260602-glymur-fix-usb-mp-qmpphy-clock-specifier-v1-1-19c6f44d5655@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Mahua CRD is pin-to-pin compatible with Glymur CRD, as verified
against schematics; only the external peripherals connected differ.
Move the common board nodes from glymur-crd.dts to glymur-crd.dtsi
to enable reuse by Mahua CRD.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260629-glymur-mahua-common-nodes-v3-1-98cc00943359@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The spmi_bus2 node was named spmi@c48000, but its reg property
specifies the base address as 0x0c448000. Fix the node name to
spmi@c448000 to match the actual register base address.
Fixes: 41b6e8db40 ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-glymur-fix-spmi-bus2-unit-addr-v1-1-27d6edca51e8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The tertiary controller's HSPHY has its own toggle in TCSR, while the
primary one is wired directly to the XO clock. Fix that.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-topic-hamoa_hsphy_clk-v1-1-d85203756505@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
VBIF register range is 0x3000 long, so correct the code even though
missing part seems without practical impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-8-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DisplayPort block on Qualcomm SM8750 has few too short address space
ranges and misses four more spaces. Complete the hardware description,
which in the future might be important for full feature support.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-7-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DisplayPort block on Qualcomm SM8650 has few too short address space
ranges and misses four more spaces. Complete the hardware description,
which in the future might be important for full feature support.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-6-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add register ranges for the SC8280XP interconnect providers so the driver
can program the NoC QoS registers.
Move the real NoC providers under soc@0, keep clk_virt and mc_virt as
virtual top-level providers, and add the clocks required for QoS
programming on aggre1_noc and aggre2_noc.
Signed-off-by: Xilin Wu <sophon@radxa.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-sc8280xp-qos-v1-3-15135858cd98@radxa.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IR transmitting LED is connected to SPI8 controller.
Reviewed-by: Sean Young <sean@mess.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-7-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB-C port is used for powering external devices and transfer
data from/to them.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-5-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Plug in USB-C related bits and pieces to enable USB role switching.
Also, remove dr_mode to enable OTG capability.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-4-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the vibrator on the PMI632 which is used on this phone.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-3-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM6125's SMMU uses 36bit VAs, which is a good indicator that we
should increase (dma-)ranges - and by extension #address- and
#size-cells to prevent things from getting lost in translation
(both literally and figuratively). Do so.
Fixes: 7bb7c90e0a ("arm64: dts: qcom: Add Redmi Note 8T")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603141433.MDqfoVHn-lkp@intel.com/
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-1-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The xo_board clock is derived from the 48 MHz WiFi output clock (divided
by 2), and not a standalone fixed frequency source.
The previous implementation incorrectly modelled it as a fixed-clock with
fixed frequency, which doesn't reflect the actual hardware clock tree.
Update for fixed-factor-clock compatibility, and properly reference the
source clock.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-5-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the CMN PLL node required for networking hardware operation on IPQ5332.
The CMN PLL core runs at 6 GHz on this platform, differing from others like
IPQ9574.
Configure the reference clock path where XO (48 MHz or 96 MHz) routes
through the WiFi block's multiplier/divider to provide a stable 48 MHz
reference to the CMN PLL.
.XO (48 MHZ or 96 MHZ)-->WiFi (multiplier/divider)--> 48 MHZ to CMN PLL.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-4-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since describing the PCIe PHY directly under the RC node is now
deprecated, move the references to the respective PCIe port nodes.
And also move the PCIe PERST and wake GPIOs from the controller nodes to
the corresponding PCIe port nodes on sc8280xp-based platforms:
- sa8295p-adp
- sa8540p-ride
- sc8280xp-crd
- sc8280xp-huawei-gaokun3
- sc8280xp-lenovo-thinkpad-x13s
- sc8280xp-microsoft-arcata
- sc8280xp-microsoft-blackrock
Signed-off-by: Xilin Wu <sophon@radxa.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-8280-move-perst-wake-v1-1-5b33cef2d807@radxa.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Motorola Edge 30 is a smartphone released in 2022.
This commit has the following features working:
- Display (simplefb)
- Touchscreen
- Power and volume buttons
- Storage (UFS 3.1)
- Battery (ADSP battmgr)
- USB (Type-C, 2.0, dual-role)
- Wi-Fi and Bluetooth (WCN6750 hw1.0)
As there are 2 display panel options, prepare for full display support
by creating a common dtsi and per-panel dts files, as is done for
other upstreamed devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20260506212319.682749-2-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'reg' is 0xa0000000 so the node name is missing a zero. Add it, so that
the reg and address in the node name matches.
No functional impact.
Fixes: 4cbea66876 ("arm64: dts: qcom: sm7225: Add device tree for Fairphone 4")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-sm6350-misc-v1-3-0b9efc22690c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define the PIL relocation info region, so that post mortem tools will be
able to locate the loaded remoteprocs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-sm6350-misc-v1-2-0b9efc22690c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add some interconnect paths for the GPU, the MPSS (modem) and CDSP.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-sm6350-misc-v1-1-0b9efc22690c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Hall effect sensor (flip cover) for Billion Capture+.
The GPIO is mapped to SW_LID events as in other qcom devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Link: https://lore.kernel.org/r/20260331-rimob-new-features-v5-6-5fcf42a29c12@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This device uses a Goodix GT5688 touch controller, connected to i2c_3.
Add it to the device tree.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331-rimob-new-features-v5-5-5fcf42a29c12@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure and enable the WCNSS which provides WiFi and Bluetooth on this
device using the WCN3660B chip.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Link: https://lore.kernel.org/r/20260331-rimob-new-features-v5-4-5fcf42a29c12@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the description for the display panel found on this phone.
And with this done we can also enable the GPU and set the zap shader
firmware path.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Link: https://lore.kernel.org/r/20260331-rimob-new-features-v5-3-5fcf42a29c12@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On platforms where the offset is stored in a Qualcomm specific UEFI
variable the variables are also accessed in a non-standard way, which
means that the OS cannot assume that the variable service is available
by the time the RTC driver probes.
Use the new 'qcom,uefi-rtc-info' property to indicate that the offset is
stored in a UEFI variable so that the OS can determine whether to wait
for it to become available.
[1]: https://lore.kernel.org/r/20250423075143.11157-4-johan+linaro@kernel.org
Fixes: 16a7fed117 ("arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023")
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260501-blackrock-rtc-v1-1-bddf3e37fa94@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for building an EL2 combined DTB for the talos-evk
in the Qualcomm DTS Makefile.
The new talos-evk-el2.dtb is generated by combining the base
talos-evk.dtb with the talos-el2.dtbo overlay, enabling EL2-specific
configurations required by the platform.
Signed-off-by: Xin Liu <xin.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260427082325.1895450-1-xin.liu@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure and enable the node for IPA which enables mobile data on this
device.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260410-milos-ipa-v2-2-c699b6b8cf27@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the description of the IPA block in the Milos SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260410-milos-ipa-v2-1-c699b6b8cf27@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
USB controller on Kaanapali SoC is capable of switching role betwen device
and host and also is a wakeup capable device. Add usb-role-switch and
wakeup-source properties to the controller node accordingly.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260702184440.442037-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
USB controller on SM8750 can be configured as a wakeup capable device.
Add wakeup-source property indicating the same.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260702184511.442129-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We know the driver is reporting s3706b, introduce the compatible so we
can more easily introduce quirks for weird touchscreen replacements in
followup series.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260523-synaptics-rmi4-dt-v2-2-0645122babdc@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a default pin configuration for CAM_MCLK3 (GPIO97), which is used
as a master clock for camera sensors on SM8250 boards.
Signed-off-by: Xin Xu <xxsemail@qq.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/tencent_47473BB31C9142449F8C7C1BE69D9071510A@qq.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the pm8008 PMIC node on i2c15 with seven LDOs,
using GPIO84 as interrupt and GPIO76 as reset.
Signed-off-by: Xin Xu <xxsemail@qq.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/tencent_D4AB219A942591742C3A6DA4DFB0EBA49505@qq.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add SoC ID for Qualcomm Snapdragon SDM850.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260627-sda850-v2-1-44bf46ade42e@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add label properties to TPDM and CTI nodes in the hamoa device tree to
provide human-readable identifiers for each CoreSight device. These
labels allow userspace tools and the CoreSight framework to identify
devices by name rather than by base address.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260414-add-label-to-coresight-device-v2-7-5017d07358f2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add label properties to TPDM and CTI nodes in the sm8750 device tree to
provide human-readable identifiers for each CoreSight device. These
labels allow userspace tools and the CoreSight framework to identify
devices by name rather than by base address.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260414-add-label-to-coresight-device-v2-6-5017d07358f2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
