Add optional refin voltage enabling. The property "refin-supply" is
already available and optional in the current fdt dt_schema.
Note that the driver does not need to take any actions if the supply
is not present because a pin strap is used to change the behavior
of the device if an external reference is connected.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250530-wip-bl-ad7606-reference-voltages-v2-2-d5e1ad7e6f14@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ROHM BU79100G is a 12-bit, single channel ADC. From the software point
of view it is identical to the TI's ADS7866. Support reading ADC
measurements using the ad7476.c
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/aDk2qNE9LTVnfAFM@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is really no reason for having the `regmap` name as a macro
definition if it is only used once directly in `struct regmap_config`.
It is also more readable this way. Remove these macro definitions and
instead use the string literal directly.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/3a8572de8316c7d2746c2ccea8c478f594221319.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is really no reason for having the IRQ name as a macro definition
if it is only used once (often in functions requesting the IRQ). It
is also more readable this way. Remove these macro definitions and
instead use the string literal directly.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/3dc06cb2a83d292c50d9758643aad37ca5c6d95c.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is really no reason for having the driver name as a macro
definition if it is only used once (often as `.name` in `struct
device_driver`). It is also more readable this way. Remove these macro
definitions and instead use the string literal directly.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/4840779a167e027b8be77c82f7a4f27210ef084a.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactors inv_mpu_aux_read() and inv_mpu_aux_write() to extract the common
I2C transfer sequence into inv_mpu_i2c_master_xfer(), which now handles
starting and stopping the I2C master, waiting for completion, disabling
SLV0, and checking for NACK errors.
This refactoring removes code duplication and improves maintainability.
No functional changes are intended.
Signed-off-by: Isabella Caselli <bellacaselli20@gmail.com>
Co-developed-by: Rodrigo Michelassi <rodrigo.michelassi@usp.br>
Signed-off-by: Rodrigo Michelassi <rodrigo.michelassi@usp.br>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250507184539.54658-1-bellacaselli20@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use DMA-safe memory instead of stack-allocated memory for the call to
regmap_bulk_read() in the ada4250_init() function as this could be used
directly by a SPI controller.
Also remove unnecessary use of get_unaligned_le16() and explicitly
include linux/types.h e.g. for __le16 while we are fixing this up.
Note this is DMA issue does not appear to be an actual bug due to
internals of the regmap SPI implementation. However, for IIO we are
following guidance that we should not make that assumption.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250418-iio-amplifiers-ada4250-simplify-data-buffer-in-init-v1-1-7e7bd6dad423@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a mechanism to be able to configure and work with the available
g-ranges keeping the precision of 13 digits.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250510224405.17910-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce enums and functions to work with the sample frequency
adjustments. Let the sample frequency adjust via IIO and configure
a reasonable default.
Replace the old static sample frequency handling. During adjustment of
bw registers, measuring is disabled and afterwards enabled again.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250510224405.17910-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use a unique function for the bus free check by polling, to reduce
duplicated code. An error is always thrown in case of timeout.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250523-ad3552r-fix-bus-read-v3-2-310e726dd964@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add sinc1 and sinc5+pf1 filter types used for ad4080 device.
Include these two options into the filter_type available attribute.
Add also the option for filter disabled.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-11-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for setting the number of lanes enabled.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-8-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for starting the sync process used for data
capture alignment.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-7-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for enabling/disabling filter based on the filter type
provided.
This feature is specific to the axi ad408x IP core, therefore add new
compatible string and corresponding iio_backend_ops.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-6-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a new compatible and related bindings for the fpga-based
AD408x AXI IP core, a variant of the generic AXI ADC IP.
The AXI AD408x IP is a very similar HDL (fpga) variant of the
generic AXI ADC IP, intended to control ad408x familiy.
Although there are some particularities added for extended
control of the ad408x devices such as the filter configuration.
Wildcard naming is used to match the naming of the published
firmware.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250516082630.8236-5-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add iio backend support for number of lanes to be enabled.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-4-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add backend support for staring the capture synchronization.
When activated, it initates a proccess that aligns the sample's most
significant bit (MSB) based solely on the captured data, without
considering any other external signals.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-3-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add backend support for digital filter type selection.
This setting can be adjusted within the IP cores interfacing devices.
The IP core can be configured based on the state of the actual
digital filter configuration of the part.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The renaming to the timer_*() namespace was delayed due massive conflicts
against Linux-next. Now that everything is upstream finish the conversion.
-----BEGIN PGP SIGNATURE-----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=jJaU
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread via
exit_thread(). exit_thread() invokes io_bitmap_exit() which does the IO
bitmap cleanups, which unfortunately assume that the cleanup is related
to the current task, which is obviously bogus. Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the command
buffer in two places, which keeps stale error messages around. Bring
them back.
- Remove unused trace events
-----BEGIN PGP SIGNATURE-----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=x7j0
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db8 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db8 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix typo in the currently unused RAPL_GFX_ALL macro definition.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
