Mailbox status is returned as int, but some callers read it as u32
(likely a typo). Use int instead.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260818231140.729887-2-umesh.nerlige.ramappa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Having scratch enabled does not make a VM capable of handling recoverable
page faults. Allowing scratch VMs through the ASID lookup also admits
dma-fence mode VMs.
If such a VM faults on an already valid VMA, the handler reports success
without fixing the fault, causing the GPU to retry indefinitely.
Only allow fault-mode VMs through the ASID lookup. Fault-mode VMs using
scratch remain supported, while faults from 3D VMs are rejected.
Fixes: ad9843aac9 ("drm/xe/madvise: Implement purgeable buffer object support")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260820065445.567228-1-arvind.yadav@intel.com
While reading the main GT powergating info from debugfs, include both
RCS and CCS engine masks.
Fixes: 0914c1e45d ("drm/xe/xe_gt_idle: add debugfs entry for powergating info")
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260819073457.1812722-2-balasubramani.vivekanandan@intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The database was updated and the WA is no longer listed as applicable
to media 3503, so don't enable it there.
Fixes: c57db41b8d ("drm/xe/guc: Add Wa_14025883347 for GuC DMA failure on reset")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sk Anirban <sk.anirban@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260818213520.283063-1-daniele.ceraolospurio@intel.com
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
Fixes: 5a2f117a80 ("drm/xe: Do not wedge device on killed exec queues")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patch.msgid.link/20260814074106.92670-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
EXEC_QUEUE_FLAG_PERMANENT used to mark kernel-owned exec queues that were
only torn down at driver unload, so that guc_exec_queue_destroy() could
take a synchronous teardown path for them while user queues went through
the async destroy worker.
Exec-queue teardown now routes every queue through the single
message-based path (with the message layer gating any HW/H2G work behind
drm_dev_enter()/drm_dev_exit() and taking a runtime-PM reference only
while the device is bound), so the PERMANENT flag no longer has any effect.
Drop it and all its users, and renumber the remaining flags to keep the
bit range contiguous.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260811133753.1742666-6-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
The core_hotunplug "with-load" subtests trigger a "Missing outer runtime
PM protection" warning when an exec queue is torn down from a deferred fd
close after the device has been hot-unplugged:
guc_exec_queue_add_msg
guc_exec_queue_destroy
xe_exec_queue_destroy
xe_file_close
The reference is not actually missing. On unplug the PCI core disables
runtime PM (device_del() -> __pm_runtime_disable()) while the old
drm_device is kept alive by the still-open fd. Once runtime PM is
disabled pm_runtime_get_if_in_use() returns -EINVAL regardless of the
usage count, so xe_pm_runtime_get_noresume() can no longer observe the
held reference and warns.
drm_dev_unplug() always runs before runtime PM is disabled, so gate the
message submission layer on the bound state instead of the PM reference:
- guc_exec_queue_add_msg(): only take the noresume PM reference while
drm_dev_enter() succeeds and record it in the message (MSG_PM_REF), so
the put in guc_exec_queue_process_msg() stays balanced.
- guc_exec_queue_process_msg(): re-check the bound state and skip each
handler's HW access once the device is gone.
- guc_exec_queue_destroy(): always post the CLEANUP message; the cleanup
handler issues the deregister H2G only while bound, registered, fw
running and not wedged, otherwise it tears down on the driver side.
Also document the post-unplug PM-reference hazard in
xe_pm_runtime_get_noresume().
Observed with new IGT core_hotunplug subtests:
igt@core_hotunplug@hotreplug-with-load
igt@core_hotunplug@hotunplug-rescan-with-load
v2:
- Drop the drm_dev_is_unplugged() bypass from guc_exec_queue_destroy()
and instead exclude hot-unplug from the WARN in
xe_pm_runtime_get_noresume().
v3:
- Rework the fix in the message-submission layer instead of touching the
WARN; gate PM/HW work on drm_dev_enter() and route all queues through
the CLEANUP message. (Matthew Brost)
- Prove the root cause (runtime PM disabled on unplug, not a zero
refcount) and record it in the commit message. (Matt B, Raag)
- Also remove EXEC_QUEUE_FLAG_PERMANENT flag in
separate patch (Matthew Brost)
Link: https://patchwork.freedesktop.org/patch/725773/?series=166744&rev=4
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Tested-by: Varun Gupta <varun.gupta@intel.com>
Link: https://patch.msgid.link/20260811133753.1742666-5-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Update PCI error handling path to disconnect the device when
XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET is set. This prevents bus
reset and preserves the device state so that it is available to
the user for debugging.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260819113519.510853-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Report 'Queue full' error using xe_log_err() helper.
While around, replace WARN_ON with WARN_ON_ONCE as there is no
need for extra noise each time we hit this unlikely condition.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-33-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Report 'device wedged' error using xe_log_err_fatal() helper.
Use -EIO as the error cause, as nothing else is provided here.
The hints about the recovery method and bug filing are now
separated as it only needs to be printed once.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-26-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we fail to create any of the survivability sysfs files, the user
can't view boot status registers any more. Report them into dmesg
instead using our existing SIGID helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-23-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we fail to create any of the survivability sysfs files, actual
error is reported by the caller. Move that reporting to sysfs helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-22-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For completeness, we should catch and report all probe errors, not
just the ones that have explicit error message. Split xe_pci_probe()
function after a display check to avoid reporting -EPROBE_DEFER and
use xe_log_err_fatal() helper to report all returned errors.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-20-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add simple sanity tests for all xe_any macros to make sure they
are working as expected.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-18-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All dmesg log lines generated by the xe_log() functions or helper
macros are expected to have a stable format. Add tests to verify
that generated output is not accidentally changed. Add demo pseudo
tests to show how to use all variants of the xe_log() helpers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-17-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While we have helpers pdev_to_xe_device() and kdev_to_xe_device()
to obtain the xe_device pointer from the struct device pointer or
from the struct pci_dev pointer, we must also setup the drm_device
pointer as driver data in the device to make them work.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-16-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While not strictly required, we want to make sure that components
definitions used by the RAS firmware are in the same fixed relation
with HW components definitions used by the LOG infrastructure to
allow code simplification. Add static asserts to enforce that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-15-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When CONFIG_PRINTK_INDEX is enabled, it is expected that all device
level printk messages are indexed for audit. While usually this is
done automatically behind the scenes when code is using regular
dev_printk macros, since we are generating different dmesg messages
inside xe_log_emit() based on the severity, component and location,
we only get those entries in /sys/kernel/debug/printk/index/xe:
<3> drivers/gpu/drm/xe/xe_log.c:142 log_dmesg_vprintk "%s %s: [drm] *ERROR* %pV"
<6> drivers/gpu/drm/xe/xe_log.c:140 log_dmesg_vprintk "%s %s: [drm] %pV"
Explicitly generate printk index using dev_printk_index_emit() with
some generic prefix that includes the SIGID tag.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-12-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For the software based SIGID errors, we will usually want to pass
only the errno value as the data to be logged in the dmesg line or
the CPER record. Add simple wrappers for that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com> #v3
Link: https://patch.msgid.link/20260814171801.13347-11-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are only few CPER severity levels defined, add some helpers
to avoid forcing developers to write full CPER severity enum name
in every macro call.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-10-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Our component list already defines relation between the component
name, identified by the TAG, and its numerical identifier and the
assigned SIGID. We can also already prepare location identifier
based on the pointer type used to emit the log entry. Add helper
that will prepare SIGID, COMPONENT and LOCATION parameters for
xe_log_emit() using provided components TAG and the pointer.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-9-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are only few CPER severity levels defined, add more helpers
to avoid forcing developers to write full CPER severity name in
every function call.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-8-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We can determine the location of the SIGID error source based on the
type of the xe pointer being currently available. Add helper macros
that will accept any of xe_device, xe_tile or xe_gt pointers instead
of plain pci_dev to generate valid XE_LOG_LOCATION identifier and then
call low-level xe_log_emit(pdev) function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-7-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are only few CPER severity levels defined, add simple helper
for each of them, to avoid forcing developers to write full severity
name in every function call.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-6-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While we can't directly use our xe_tile|gt_err|info helpers to get
nice Tile/GT decorations, we can still add them manually based on
the structured location parameter. Similarly, we can add component
name prefix based on the component identifier.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-5-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce structured identifiers for each component type that
could emit a SIGID log entry and for their locations. We plan
to store those IDs in the CPER records for better filtering.
Define also structured identifiers for the supported locations.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com> #v3
Link: https://patch.msgid.link/20260814171801.13347-4-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Today the driver reports faults with ad-hoc drm_err()/xe_gt_err()
strings that have no stable shape. That is readable for a human, but it
gives fleet tooling nothing durable to match on: the wording changes
between releases, lines can be rate-limited or dropped under an error
storm, and there is no consistent way to ask "which recognised fault
just happened?".
Introduce a signature identifier (SIGID): a small, stable integer that
names one recognised Xe fault site and serves as the primary handle for
triage. A SIGID maps, through published end-user documentation, to a
description and a recommended action; the driver only has to emit the
right SIGID next to the usual human-readable text.
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Assisted-by: Copilot:Opus-4.8
Co-developed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-3-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In upcoming patches we want to define macros that will work with
either xe_device or xe_tile or xe_gt pointers. To make them work
and to allow compiler optimizations, introduce set of helpers
that will return either expected pointer type or NULL or make
necessary conversions to/from the struct xe/device/pci_dev.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-2-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enable package and vram temperatures support from hwmon on CRI.
The required MMIO offsets of these are same as on BMG.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260813193546.511093-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When PUNIT (power management unit) errors are detected that persist across
warm resets, mark the device as wedged with DRM_WEDGE_RECOVERY_COLD_RESET
and notify userspace that a complete device power cycle is required to
restore normal operation.
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260805071152.1225416-9-mallesh.koujalagi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When ``WEDGED=cold-reset`` is sent, it indicates that the device has
encountered an error condition that cannot be resolved through other
recovery methods such as driver rebind or bus reset, and requires a
complete device power cycle to restore functionality.
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260805071152.1225416-8-mallesh.koujalagi@intel.com
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce DRM_WEDGE_RECOVERY_COLD_RESET (BIT(4)) recovery method to handle
scenarios requiring device power cycle.
This method addresses cases where other recovery mechanisms
(driver reload, PCIe reset, etc.) are insufficient to restore device
functionality. When set, it indicates to userspace that only device power
cycle can recover the device from its current error state.
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link:
https://patch.msgid.link/20260805071152.1225416-7-mallesh.koujalagi@intel.com
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is supposed to print the error code but there is a copy and
paste bug so it prints "bo" instead of "err".
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/an1tu0z3T-qX1ogn@stanley.mountain
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When an interrupt is received for correctable errors indicating that error
counter has crossed its threshold, read the current counter value and
deliver a drm-ras error-event to userspace for each affected component.
Also send drm-ras error-event to userspace for uncorrectable errors on
receiving an AER.
To avoid sending duplicate events when the same component appears multiple
times in the response, send the error-event once per component.
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260810112008.1858731-6-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Define a new netlink event 'error-event' and a new multicast group
'error-report' in drm_ras. Each event contains device name, node and
error information to identify the error triggering the event.
Add drm_ras_nl_error_event() to trigger an event from the driver.
Userspace must subscribe to 'error-report' to receive 'error-event'
notifications.
Usage:
$ sudo ynl --family drm_ras --subscribe error-report
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260810112008.1858731-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
DRM RAS interface provides a standardized way for GPU/accelerator
drivers to expose error counters and other reliability nodes to
user space via Generic Netlink.
Since this is cross-driver infrastructure carrying its own uAPI, add a
dedicated MAINTAINERS entry covering the implementation, headers,
netlink spec and documentation, maintained through drm-misc.
Cc: Simona Vetter <simona@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Donald Hunter <donald.hunter@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Raag Jadav <raag.jadav@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: David Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260805094949.536651-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
