[ Upstream commit 089702632f ]
XCD id is assigned to uuid, which causes some performance
drop in SPX mode, assigning AID back will resolve the
issue.
Fixes: 3a75edf93a ("drm/amdkfd: set uuid for each partition in topology")
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a79482699 ]
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields
of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the
ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4
then the last bit is always 1 so this code always sets .H_SYNC_POLARITY
and .V_SYNC_POLARITY to true.
This code is instead intended to check if the ATOM_HSYNC_POLARITY or
ATOM_VSYNC_POLARITY flags are set and reverse the result. In other
words, it's supposed to be a logical negate instead of a bitwise negate.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43cd4b634e ]
When DT is used to get the reference of 'rp1_node', it should be released
when not needed anymore, otherwise it is leaking.
In such a case, add the missing of_node_put() call at the end of the probe,
as already done in the error handling path.
Fixes: 49d63971f9 ("misc: rp1: RaspberryPi RP1 misc driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://patch.msgid.link/9bc1206de787fa86384f3e5ba0a8027947bc00ff.1762585959.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f30e7a423 ]
FMODE_NOCMTIME used to be just a hack for the legacy XFS handle-based
"invisible I/O", but commit e5e9b24ab8 ("nfsd: freeze c/mtime updates
with outstanding WRITE_ATTRS delegation") started using it from
generic callers.
I'm not sure other file systems are actually read for this in general,
so the above commit should get a closer look, but for it to make any
sense, file_update_time needs to respect the flag.
Lift the check from file_modified_flags to file_update_time so that
users of file_update_time inherit the behavior and so that all the
checks are done in one place.
Fixes: e5e9b24ab8 ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-3-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd9a42f1b ]
Currently the two high-level APIs use two helper functions to implement
almost all of the logic. Refactor the two helpers and the common logic
into a new file_update_time_flags routine that gets the iocb flags or
0 in case of file_update_time passed so that the entire logic is
contained in a single function and can be easily understood and modified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-2-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 7f30e7a423 ("fs: lift the FMODE_NOCMTIME check into file_update_time_flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6df0f649c ]
wait_for_completion_timeout() returns the remaining jiffies
(at least 1) on success or 0 on timeout, but never negative
error codes. The current code incorrectly checks for negative
values, causing timeouts to be ignored and treated as success.
Check for a zero return value to correctly identify and
handle timeout events.
Fixes: 0cf7befa3e ("greybus: gb-beagleplay: Add firmware upload API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251121064027.571-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9906efa545 ]
The use of firmware_loader is an implementation detail of drivers rather
than a dependency. FW_LOADER is typically selected rather than depended
on; the Rust abstractions should do the same thing.
Fixes: de6582833d ("rust: add firmware abstractions")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251106-b4-select-rust-fw-v3-1-771172257755@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b97d46dd ]
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c5f4a5347 ]
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273.
Fixes: dc0b943523 ("gfs: Don't use GFP_NOFS in gfs2_unstuff_dinode")
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd41d3420e ]
This configuration was missing from the initial commit.
Found by Jiri Benc <jbenc@redhat.com>
Fixes: c0a3873b99 ("ASoC: nau8325: new driver")
Cc: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-3-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2c7e5e17c0 upstream.
clang W=1 builds warn:
nau8325.c:430:13: error: variable 'n2_max' is uninitialized when used here [-Werror,-Wuninitialized]
which are false positive, because the variables will be always
initialized when used (guarded by mclk_max!=0 check). However
initializing them upfront makes the code more obvious and easier, plus
it silences the warning.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203140611.87191-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b4d072c98e ]
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-2-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: cd41d3420e ("ASoC: nau8325: add missing build config")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a2416892e ]
Clockevents cannot be deregistered so suppress the bind attributes to
prevent the driver from being unbound and releasing the underlying
resources after registration.
Even if the driver can currently only be built-in, also switch to
builtin_platform_driver() to prevent it from being unloaded should
modular builds ever be enabled.
Fixes: cec32ac758 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251111153226.579-4-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b452d2c97e ]
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init. Device managed resource actions
similarly cannot be discarded.
The "_probe" suffix of the driver structure name prevents modpost from
warning about this so replace it to catch any similar future issues.
Fixes: cec32ac758 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: stable@vger.kernel.org # 6.16
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251017054943.7195-1-johan@kernel.org
Stable-dep-of: 6a2416892e ("clocksource/drivers/nxp-stm: Prevent driver unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e25f964cf4 ]
The driver does not support unbinding (e.g. as clockevents cannot be
deregistered) so suppress the bind attributes to prevent the driver from
being unbound and rebound after registration (and disabling the timer
when reprobing fails).
Even if the driver can currently only be built-in, also switch to
builtin_platform_driver() to prevent it from being unloaded should
modular builds ever be enabled.
Fixes: bee33f22d7 ("clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251111153226.579-3-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aa10f0e2e ]
Clockevents cannot be deregistered so suppress the bind attributes to
prevent the driver from being unbound and releasing the underlying
resources after registration.
Fixes: 4891f01527 ("clocksource/drivers/arm_arch_timer: Add standalone MMIO driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20251111153226.579-2-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b38a8b31e ]
The purpose of the devm_add_action_or_reset() helper is to call the
action function in case adding an action ever fails so drop the clock
source deregistration from the error path to avoid deregistering twice.
Fixes: cec32ac758 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251017055039.7307-1-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ba8e2aae1 ]
The ralink_systick_init() function does not release all acquired resources
on its error paths. If irq_of_parse_and_map() or a subsequent call fails,
the previously created I/O memory mapping and IRQ mapping are leaked.
Add goto-based error handling labels to ensure that all allocated
resources are correctly freed.
Fixes: 1f2acc5a8a ("MIPS: ralink: Add support for systick timer found on newer ralink SoC")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251030090710.1603-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce04ec03a9 ]
The kernel BOs unnecessarily got added to the external objects list
of drm_gpuvm, when mapping to GPU, which would have resulted in few
extra CPU cycles being spent at the time of job submission as
drm_exec_until_all_locked() loop iterates over all external objects.
Kernel BOs are private to a VM and so they share the dma_resv object of
the dummy GEM object created for a VM. Use of DRM_EXEC_IGNORE_DUPLICATES
flag ensured the recursive locking of the dummy GEM object was ignored.
Also no extra space got allocated to add fences to the dma_resv object
of dummy GEM object. So no other impact apart from few extra CPU cycles.
This commit sets the pointer to dma_resv object of GEM object of
kernel BOs before they are mapped to GPU, to prevent them from
being added to external objects list.
v2: Add R-bs and fixes tags
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251120172118.2741724-1-akash.goel@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7ab6f9466 ]
The original addition of cache information for the Amlogic S922X SoC
used the wrong next-level cache node for CPU cores 100 and 101,
incorrectly referencing `l2_cache_l`. These cores actually belong to
the big cluster and should reference `l2_cache_b`. Update the device
tree accordingly.
Fixes: e7f85e6c15 ("arm64: dts: amlogic: Add cache information to the Amlogic S922X SoC")
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251123-fixkhadas-v1-1-045348f0a4c2@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62356fccb1 ]
In some cases, this logic can result in doorbell writes being
skipped when they should not have been (at least on GEN3 HW),
so remove it. This also means that the mb() can be safely
downgraded to dma_wmb().
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-9-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eef3ad030b ]
The GEN3 hardware does not appear to support IBK_LOCAL_DMA_LKEY. Attempts
to use it will result in an AE.
Fixes: eb31dfc2b4 ("RDMA/irdma: Restrict Memory Window and CQE Timestamping to GEN3")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-8-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71d3bdae5e ]
The HW disables bounds checking for MRs with a length of zero, so
the driver will only allow a zero length MR if the "all_memory"
flag is set, and this flag is only set if IB_PD_UNSAFE_GLOBAL_RKEY
is set for the PD.
This means that the "get_dma_mr" method will currently fail unless
the IB_PD_UNSAFE_GLOBAL_RKEY flag is set. This has not been an issue
because the "get_dma_mr" method is only ever invoked if the device
does not support the local DMA key or if IB_PD_UNSAFE_GLOBAL_RKEY
is set, and so far, all IRDMA HW supports the local DMA lkey.
However, some new HW does not support the local DMA lkey, so the
"get_dma_mr" method needs to work without IB_PD_UNSAFE_GLOBAL_RKEY
being set.
To support HW that does not allow the local DMA lkey, the logic has
been changed to pass an explicit flag to indicate when a dma_mr is
being created so that the zero length will be allowed.
Also, the "all_memory" flag has been forced to false for normal MR
allocation since these MRs are never supposed to provide global
unsafe rkey semantics anyway; only the MR created with "get_dma_mr"
should support this.
Fixes: bb6d73d9ad ("RDMA/irdma: Prevent zero-length STAG registration")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-7-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eff1ecce3 ]
Removes write to IRDMA_PFINT_AEQCTL register prior to destroying AEQ,
as this register does not exist in GEN3+ hardware and this kind of IRQ
configuration is no longer required.
Fixes: b800e82feb ("RDMA/irdma: Add GEN3 support for AEQ and CEQ")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-5-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e13d880eb ]
During a refactor of the irdma GEN2 code, the kfree of the irdma_pci_f struct
in icrdma_remove(), which was originally introduced upstream as part of
commit 80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
was accidentally removed.
Fixes: 0c2b80cac9 ("RDMA/irdma: Refactor GEN2 auxiliary driver")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-4-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5583a55e07 ]
Some platforms (e.g. SC8280XP and X1E) support more than 128 stream
matching groups. This is more than what is defined as maximum by the ARM
SMMU architecture specification. Commit 1226113473 ("iommu/arm-smmu-qcom:
Limit the SMR groups to 128") disabled use of the additional groups because
they don't exhibit the same behavior as the architecture supported ones.
It seems like this is just another quirk of the hypervisor: When running
bare-metal without the hypervisor, the additional groups appear to behave
just like all others. The boot firmware uses some of the additional groups,
so ignoring them in this situation leads to stream match conflicts whenever
we allocate a new SMR group for the same SID.
The workaround exists primarily because the bypass quirk detection fails
when using a S2CR register from the additional matching groups, so let's
perform the test with the last reliable S2CR (127) and then limit the
number of SMR groups only if we detect that we are running below the
hypervisor (because of the bypass quirk).
Fixes: 1226113473 ("iommu/arm-smmu-qcom: Limit the SMR groups to 128")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d45db6326 ]
Add a missing struct short description and a missing leading " *" to
lp855x.h to avoid kernel-doc warnings:
Warning: include/linux/platform_data/lp855x.h:126 missing initial short
description on line:
* struct lp855x_platform_data
Warning: include/linux/platform_data/lp855x.h:131 bad line:
Only valid when mode is PWM_BASED.
Fixes: 7be865ab86 ("backlight: new backlight driver for LP855x devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251111060916.1995920-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9341d6698f ]
LED Backlight is a consumer of one or multiple LED class devices, but
devlink is currently unable to create correct supplier-producer links when
the supplier is a class device. It creates instead a link where the
supplier is the parent of the expected device.
One consequence is that removal order is not correctly enforced.
Issues happen for example with the following sections in a device tree
overlay:
// An LED driver chip
pca9632@62 {
compatible = "nxp,pca9632";
reg = <0x62>;
// ...
addon_led_pwm: led-pwm@3 {
reg = <3>;
label = "addon:led:pwm";
};
};
backlight-addon {
compatible = "led-backlight";
leds = <&addon_led_pwm>;
brightness-levels = <255>;
default-brightness-level = <255>;
};
In this example, the devlink should be created between the backlight-addon
(consumer) and the pca9632@62 (supplier). Instead it is created between the
backlight-addon (consumer) and the parent of the pca9632@62, which is
typically the I2C bus adapter.
On removal of the above overlay, the LED driver can be removed before the
backlight device, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
Call trace:
led_put+0xe0/0x140
devm_led_release+0x6c/0x98
Another way to reproduce the bug without any device tree overlays is
unbinding the LED class device (pca9632@62) before unbinding the consumer
(backlight-addon):
echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind
echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind
Fix by adding a devlink between the consuming led-backlight device and the
supplying LED device, as other drivers and subsystems do as well.
Fixes: ae232e45ac ("backlight: add led-backlight driver")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20250519-led-backlight-add-devlink-to-supplier-class-device-v6-1-845224aeb2ce@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24d4da5c25 ]
The FILS status codes are set to 108/109, but the IEEE 802.11-2020
spec defines them as 112/113. Update the enum so it matches the
specification and keeps the kernel consistent with standard values.
Fixes: a3caf7440d ("cfg80211: Add support for FILS shared key authentication offload")
Signed-off-by: Ria Thomas <ria.thomas@morsemicro.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20251124125637.3936154-1-ria.thomas@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fd8720dff ]
Since commit 222f2c7c6d14 ("iomap: always run error completions in user
context"), read error completions are deferred to s_dio_done_wq. This
means the workqueue also needs to be allocated for async reads.
Fixes: 222f2c7c6d14 ("iomap: always run error completions in user context")
Reported-by: syzbot+a2b9a4ed0d61b1efb3f5@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251124140013.902853-1-hch@lst.de
Tested-by: syzbot+a2b9a4ed0d61b1efb3f5@syzkaller.appspotmail.com
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddb4873286 ]
At least zonefs expects error completions to be able to sleep. Because
error completions aren't performance critical, just defer them to workqueue
context unconditionally.
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251113170633.1453259-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a74b6c0e53 ]
In order to work around the existence of a vmap symbol in libpcap, the
UML makefile unconditionally redefines vmap to kernel_vmap. However,
this not only affects the actual vmap symbol, but also anything else
named vmap, including a number of struct members in DRM.
This would not be too much of a problem, since all uses are also
updated, except we now have Rust DRM bindings, which expect the
corresponding Rust structs to have 'vmap' names. Since the redefinition
applies in bindgen, but not to Rust code, we end up with errors such as:
error[E0560]: struct `drm_gem_object_funcs` has no fields named `vmap`
--> rust/kernel/drm/gem/mod.rs:210:9
Since libpcap support was removed in commit 12b8e7e69a ("um: Remove
obsolete pcap driver"), remove the, now unnecessary, define as well.
We also take this opportunity to update the comment.
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20251122083213.3996586-1-davidgow@google.com
Fixes: 12b8e7e69a ("um: Remove obsolete pcap driver")
[adjust commmit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04d98b3452 ]
The flush page DMA address is stored in a special register that is not
associated with the GPU's standard DMA range. For example, on Turing,
the GPU's MMU can handle 47-bit addresses, but the flush page address
register is limited to 40 bits.
At the point during device initialization when the flush page is
allocated, the DMA mask is still at its default of 32 bits. So even
though it's unlikely that the flush page could exist above a 40-bit
address, the dma_map_page() call could fail, e.g. if IOMMU is disabled
and the address is above 32 bits. The simplest way to achieve all
constraints is to allocate the page in the DMA32 zone. Since the flush
page is literally just a page, this is an acceptable limitation. The
alternative is to temporarily set the DMA mask to 40 (or 52 for Hopper
and later) bits, but that could have unforseen side effects.
In situations where the flush page is allocated above 32 bits and IOMMU
is disabled, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Fixes: 5728d06419 ("drm/nouveau/fb: handle sysmem flush page from common code")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251113230323.1271726-1-ttabi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7dd1182fc ]
If the call to btrfs_del_leaf() fails we return without decrementing the
extra ref we took on the leaf, therefore leaking it. Fix this by ensuring
we drop the ref count before returning the error.
Fixes: 751a27615d ("btrfs: do not BUG_ON() on tree mod log failures at btrfs_del_ptr()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d435c51365 ]
Unlike queue_scrub_stripe() which uses the global sctx->extent_path and
sctx->csum_path which are always released at the end of scrub_stripe(),
scrub_raid56_parity_stripe() uses local extent_path and csum_path, as
that function is going to handle the full stripe, whose bytenr may be
smaller than the bytenr in the global sctx paths.
However the cleanup of local extent/csum paths is only happening after
we have successfully submitted an rbio.
There are several error routes that we didn't release those two paths:
- scrub_find_fill_first_stripe() errored out at csum tree search
In that case extent_path is still valid, and that function itself will
not release the extent_path passed in.
And the function returns directly without releasing both paths.
- The full stripe is empty
- Some blocks failed to be recovered
- btrfs_map_block() failed
- raid56_parity_alloc_scrub_rbio() failed
The function returns directly without releasing both paths.
Fix it by covering btrfs_release_path() calls inside the out: tag.
This is just a hot fix, in the long run we will go scoped based auto
freeing for both local paths.
Fixes: 1dc4888e72 ("btrfs: scrub: avoid unnecessary extent tree search preparing stripes")
Fixes: 3c771c1944 ("btrfs: scrub: avoid unnecessary csum tree search preparing stripes")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38e818718c ]
From the memory-barriers.txt document regarding memory barrier ordering
guarantees:
(*) These guarantees do not apply to bitfields, because compilers often
generate code to modify these using non-atomic read-modify-write
sequences. Do not attempt to use bitfields to synchronize parallel
algorithms.
(*) Even in cases where bitfields are protected by locks, all fields
in a given bitfield must be protected by one lock. If two fields
in a given bitfield are protected by different locks, the compiler's
non-atomic read-modify-write sequences can cause an update to one
field to corrupt the value of an adjacent field.
btrfs_space_info has a bitfield sharing an underlying word consisting of
the fields full, chunk_alloc, and flush:
struct btrfs_space_info {
struct btrfs_fs_info * fs_info; /* 0 8 */
struct btrfs_space_info * parent; /* 8 8 */
...
int clamp; /* 172 4 */
unsigned int full:1; /* 176: 0 4 */
unsigned int chunk_alloc:1; /* 176: 1 4 */
unsigned int flush:1; /* 176: 2 4 */
...
Therefore, to be safe from parallel read-modify-writes losing a write to
one of the bitfield members protected by a lock, all writes to all the
bitfields must use the lock. They almost universally do, except for
btrfs_clear_space_info_full() which iterates over the space_infos and
writes out found->full = 0 without a lock.
Imagine that we have one thread completing a transaction in which we
finished deleting a block_group and are thus calling
btrfs_clear_space_info_full() while simultaneously the data reclaim
ticket infrastructure is running do_async_reclaim_data_space():
T1 T2
btrfs_commit_transaction
btrfs_clear_space_info_full
data_sinfo->full = 0
READ: full:0, chunk_alloc:0, flush:1
do_async_reclaim_data_space(data_sinfo)
spin_lock(&space_info->lock);
if(list_empty(tickets))
space_info->flush = 0;
READ: full: 0, chunk_alloc:0, flush:1
MOD/WRITE: full: 0, chunk_alloc:0, flush:0
spin_unlock(&space_info->lock);
return;
MOD/WRITE: full:0, chunk_alloc:0, flush:1
and now data_sinfo->flush is 1 but the reclaim worker has exited. This
breaks the invariant that flush is 0 iff there is no work queued or
running. Once this invariant is violated, future allocations that go
into __reserve_bytes() will add tickets to space_info->tickets but will
see space_info->flush is set to 1 and not queue the work. After this,
they will block forever on the resulting ticket, as it is now impossible
to kick the worker again.
I also confirmed by looking at the assembly of the affected kernel that
it is doing RMW operations. For example, to set the flush (3rd) bit to 0,
the assembly is:
andb $0xfb,0x60(%rbx)
and similarly for setting the full (1st) bit to 0:
andb $0xfe,-0x20(%rax)
So I think this is really a bug on practical systems. I have observed
a number of systems in this exact state, but am currently unable to
reproduce it.
Rather than leaving this footgun lying around for the future, take
advantage of the fact that there is room in the struct anyway, and that
it is already quite large and simply change the three bitfield members to
bools. This avoids writes to space_info->full having any effect on
writes to space_info->flush, regardless of locking.
Fixes: 957780eb27 ("Btrfs: introduce ticketed enospc infrastructure")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 725e462988 ]
In the previous code it was possible to incur into a double kfree()
scenario when calling add_delayed_ref_head(). This could happen if the
record was reported to already exist in the
btrfs_qgroup_trace_extent_nolock() call, but then there was an error
later on add_delayed_ref_head(). In this case, since
add_delayed_ref_head() returned an error, the caller went to free the
record. Since add_delayed_ref_head() couldn't set this kfree'd pointer
to NULL, then kfree() would have acted on a non-NULL 'record' object
which was pointing to memory already freed by the callee.
The problem comes from the fact that the responsibility to kfree the
object is on both the caller and the callee at the same time. Hence, the
fix for this is to shift the ownership of the 'qrecord' object out of
the add_delayed_ref_head(). That is, we will never attempt to kfree()
the given object inside of this function, and will expect the caller to
act on the 'qrecord' object on its own. The only exception where the
'qrecord' object cannot be kfree'd is if it was inserted into the
tracing logic, for which we already have the 'qrecord_inserted_ret'
boolean to account for this. Hence, the caller has to kfree the object
only if add_delayed_ref_head() reports not to have inserted it on the
tracing logic.
As a side-effect of the above, we must guarantee that
'qrecord_inserted_ret' is properly initialized at the start of the
function, not at the end, and then set when an actual insert
happens. This way we avoid 'qrecord_inserted_ret' having an invalid
value on an early exit.
The documentation from the add_delayed_ref_head() has also been updated
to reflect on the exact ownership of the 'qrecord' object.
Fixes: 6ef8fbce01 ("btrfs: fix missing error handling when adding delayed ref with qgroups enabled")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad93ba0267 ]
Currently selftests require xxd with the "-n <name>" option
which allows the user to specify a name not derived from
the input object path. Instead of relying on this newer
feature, older xxd can be used if we link our desired name
("test_progs_verification_cert") to the input object.
Many distros ship xxd in vim-common package and do not have
the latest xxd with -n support.
Fixes: b720903e2b ("selftests/bpf: Enable signature verification for some lskel tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20251120084754.640405-3-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90ae54b4c7 ]
ERR_get_error_all()[1] is a openssl v3 API, so to make code
compatible with openssl v1 utilize ERR_get_err_line_data
instead. Since openssl is already a build requirement for
the kernel (minimum requirement openssl 1.0.0), this will
allow bpftool to compile where opensslv3 is not available.
Signing-related BPF selftests pass with openssl v1.
[1] https://docs.openssl.org/3.4/man3/ERR_get_error/
Fixes: 40863f4d6e ("bpftool: Add support for signing BPF programs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20251120084754.640405-2-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5941f0e0c1 ]
In arm_smmu_alloc_cd_tables(), the error check following the
dma_alloc_coherent() for cd_table->l2.l1tab incorrectly tests
cd_table->l2.l2ptrs.
This means an allocation failure for l1tab goes undetected, causing
the function to return 0 (success) erroneously.
Correct the check to test cd_table->l2.l1tab.
Fixes: e3b1be2e73 ("iommu/arm-smmu-v3: Reorganize struct arm_smmu_ctx_desc_cfg")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Ryan Huang <tzukui@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47d3949a9b ]
fbtft_probe_common() allocates a memory chunk for "info" with
fbtft_framebuffer_alloc(). When "display->buswidth == 0" is true, the
function returns without releasing the "info", which will lead to a
memory leak.
Fix it by calling fbtft_framebuffer_release() when "display->buswidth
== 0" is true.
Fixes: c296d5f995 ("staging: fbtft: core support")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20251112192235.2088654-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d1548612 ]
In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the
subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function
returns an error without freeing sskb, leading to a memory leak.
Fix this by calling dev_kfree_skb() on sskb in the error handling path
to ensure it is properly released.
Fixes: 99c457d902 ("mt76: mt7615: move mt7615_mcu_set_bmc to mt7615_mcu_ops")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251113062415.103611-1-zilin@seu.edu.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
