The existing code is using RSS profile to determine IPV4/IPV6 GSO type
on all chips older than 5760X. This won't work on 5750X chips that may
be using modified RSS profiles. This commit from 2018 has updated the
driver to not use RSS profile for HW GRO packets on newer chips:
50f011b63d ("bnxt_en: Update RSS setup and GRO-HW logic according to the latest spec.")
However, a recent commit to add support for the newest 5760X chip broke
the logic. If the GRO packet needs to be re-segmented by the stack, the
wrong GSO type will cause the packet to be dropped.
Fix it to only use RSS profile to determine GSO type on the oldest
5730X/5740X chips which cannot use the new method and is safe to use the
RSS profiles.
Also fix the L3/L4 hash type for RX packets by not using the RSS
profile for the same reason. Use the ITYPE field in the RX completion
to determine L3/L4 hash types correctly.
Fixes: a7445d6980 ("bnxt_en: Add support for new RX and TPA_START completion types for P7")
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204215918.1692597-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The caller, ptp_kvm_init(), emits a warning if kvm_arch_ptp_init() exits
with any error which is not EOPNOTSUPP:
"fail to initialize ptp_kvm"
Replace ENODEV with EOPNOTSUPP to avoid this spurious warning,
aligning with the ARM implementation.
Fixes: a86ed2cfa1 ("ptp: Don't print an error if ptp_kvm is not supported")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241203-kvm_ptp-eopnotsuppp-v2-1-d1d060f27aa6@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
selftests: mlxsw: Add few fixes for sharedbuffer test
Danielle Ratson writes:
Currently, the sharedbuffer test fails sometimes because it is reading a
maximum occupancy that is larger than expected on some different cases.
This is happening because the test assumes that the packet it is sending
is the only packet being passed to the device.
In addition, some duplications on one hand, and redundant test cases on
the other hand, were found in the test.
Add egress filters on h1 and h2 that will guarantee that the packets in
the buffer are sent in the test, and remove the redundant test cases.
====================
Link: https://patch.msgid.link/cover.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test assumes that the packet it is sending is the only packet being
passed to the device.
However, it is not the case and so other packets are filling the buffers
as well. Therefore, the test sometimes fails because it is reading a
maximum occupancy that is larger than expected.
Add egress filters on $h1 and $h2 that will guarantee the above.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On both port_tc_ip_test() and port_tc_arp_test(), the max occupancy is
checked on $h2 twice, when only the error message is different and does not
match the check itself.
Remove the two duplicated test cases from the test.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/d9eb26f6fc16a06a30b5c2c16ad80caf502bc561.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test is sending only one packet generated with mausezahn from $h1 to
$h2. However, for some reason, it is testing for non-zero maximum occupancy
in both the ingress pool of $h1 and $h2. The former only passes when $h2
happens to send a packet.
Avoid intermittent failures by removing unintentional test case
regarding the ingress pool of $h1.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/5b7344608d5e06f38209e48d8af8c92fa11b6742.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
get resource + request_mem_region + ioremap can all be done by a single
function.
Replace them with devm_platform_get_and_ioremap_resource or\
devm_platform_ioremap_resource where res is not used.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> # sja1000_platform.c
Link: https://patch.msgid.link/20241203231337.182391-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix several issues for BPF LPM trie map which were found by
syzbot and during addition of new test cases (Hou Tao)
- Fix a missing process_iter_arg register type check in the
BPF verifier (Kumar Kartikeya Dwivedi, Tao Lyu)
- Fix several correctness gaps in the BPF verifier when
interacting with the BPF stack without CAP_PERFMON
(Kumar Kartikeya Dwivedi, Eduard Zingerman, Tao Lyu)
- Fix OOB BPF map writes when deleting elements for the case of
xsk map as well as devmap (Maciej Fijalkowski)
- Fix xsk sockets to always clear DMA mapping information when
unmapping the pool (Larysa Zaremba)
- Fix sk_mem_uncharge logic in tcp_bpf_sendmsg to only uncharge
after sent bytes have been finalized (Zijian Zhang)
- Fix BPF sockmap with vsocks which was missing a queue check
in poll and sockmap cleanup on close (Michal Luczaj)
- Fix tools infra to override makefile ARCH variable if defined
but empty, which addresses cross-building tools. (Björn Töpel)
- Fix two resolve_btfids build warnings on unresolved bpf_lsm
symbols (Thomas Weißschuh)
- Fix a NULL pointer dereference in bpftool (Amir Mohammadi)
- Fix BPF selftests to check for CONFIG_PREEMPTION instead of
CONFIG_PREEMPT (Sebastian Andrzej Siewior)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ1N8bhUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIO6ZAD+ITpujJgxvFGC0R7E9o3XJ7V1SpmR
SlW0lGpj6vOHTUAA/2MRoZurJSTbdT3fbWiCUgU1rMcwkoErkyxUaPuBci0D
=kgXL
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann::
- Fix several issues for BPF LPM trie map which were found by syzbot
and during addition of new test cases (Hou Tao)
- Fix a missing process_iter_arg register type check in the BPF
verifier (Kumar Kartikeya Dwivedi, Tao Lyu)
- Fix several correctness gaps in the BPF verifier when interacting
with the BPF stack without CAP_PERFMON (Kumar Kartikeya Dwivedi,
Eduard Zingerman, Tao Lyu)
- Fix OOB BPF map writes when deleting elements for the case of xsk map
as well as devmap (Maciej Fijalkowski)
- Fix xsk sockets to always clear DMA mapping information when
unmapping the pool (Larysa Zaremba)
- Fix sk_mem_uncharge logic in tcp_bpf_sendmsg to only uncharge after
sent bytes have been finalized (Zijian Zhang)
- Fix BPF sockmap with vsocks which was missing a queue check in poll
and sockmap cleanup on close (Michal Luczaj)
- Fix tools infra to override makefile ARCH variable if defined but
empty, which addresses cross-building tools. (Björn Töpel)
- Fix two resolve_btfids build warnings on unresolved bpf_lsm symbols
(Thomas Weißschuh)
- Fix a NULL pointer dereference in bpftool (Amir Mohammadi)
- Fix BPF selftests to check for CONFIG_PREEMPTION instead of
CONFIG_PREEMPT (Sebastian Andrzej Siewior)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (31 commits)
selftests/bpf: Add more test cases for LPM trie
selftests/bpf: Move test_lpm_map.c to map_tests
bpf: Use raw_spinlock_t for LPM trie
bpf: Switch to bpf mem allocator for LPM trie
bpf: Fix exact match conditions in trie_get_next_key()
bpf: Handle in-place update for full LPM trie correctly
bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie
bpf: Remove unnecessary kfree(im_node) in lpm_trie_update_elem
bpf: Remove unnecessary check when updating LPM trie
selftests/bpf: Add test for narrow spill into 64-bit spilled scalar
selftests/bpf: Add test for reading from STACK_INVALID slots
selftests/bpf: Introduce __caps_unpriv annotation for tests
bpf: Fix narrow scalar spill onto 64-bit spilled scalar slots
bpf: Don't mark STACK_INVALID as STACK_MISC in mark_stack_slot_misc
samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGS
bpf: Zero index arg error string for dynptr and iter
selftests/bpf: Add tests for iter arg check
bpf: Ensure reg is PTR_TO_STACK in process_iter_arg
tools: Override makefile ARCH variable if defined, but empty
selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap
...
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core code
for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but not
MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation, potentially
leading to the kernel consuming uninitialised stack variables when
PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and ZONE_DMA
is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a call
to page_to_phys() (from patch_map()) which checks pfn_valid() before
vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI ops
when the kernel assumes 8-bit ASIDs but running under a hypervisor on
a system that implements 16-bit ASIDs (found running Linux under
Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it is
using the same SMMU PMCG as HIP09 and suffers from the same errata
- Add GCS to cpucap_is_possible(), missed in the recent merge
-----BEGIN PGP SIGNATURE-----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=zZ4I
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
Rework of NUMA initialization in arch_numa dropped a check that refused to
accept configurations with invalid node IDs.
Restore that check to ensure that when firmware passes invalid nodes, such
configuration is rejected and kernel gracefully falls back to dummy NUMA.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmdSz9wQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kQPWCACSCwm7B8K0ctWbqGHsglCkMgF9pI/mUwjM
3c6zjzpsL5z0ii41cAEbDKWNTfroJddkWxZbDveHt3PytEYVM5ZvQL3tGwCfkpG8
wrAQSRE4XMv+ffA4LBB7U4xHxxEKtSc7OpqO3h4RED3T66hlFtKWMhiNYhl2mKwn
4ic7xLqoKj7Nu3hHc3014x/94tVWszgdgsZo+OJyPSxh+kwLdOVpwZWG22CT58UR
nTVQu/a13XVFu8R11S3a4iDMTOqb5oBVRw2pnw+knChXFJ4r2Pr/pA8uneTWEAFB
TiYclkH/0/eDd9Vpx5JTUQf4xPfuIXHynjQDwXYHWJ/U9jwLAwTH
=h/KU
-----END PGP SIGNATURE-----
Merge tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Restore check for node validity in arch_numa.
The rework of NUMA initialization in arch_numa dropped a check that
refused to accept configurations with invalid node IDs.
Restore that check to ensure that when firmware passes invalid nodes,
such configuration is rejected and kernel gracefully falls back to
dummy NUMA"
* tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch_numa: Restore nid checks before registering a memblock with a node
memblock: allow zero threshold in validate_numa_converage()
- amdgu: mostly display fixes + jpeg vcn 1.0, sriov, dcn4.0 resume
firxes
- amdkfd fixes
-----BEGIN PGP SIGNATURE-----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=7EBF
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Simona Vetter:
"Due to mailing list unreliability we missed the amdgpu pull, hence
part two with that now included:
- amdgu: mostly display fixes + jpeg vcn 1.0, sriov, dcn4.0 resume
fixes
- amdkfd fixes"
* tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: rework resume handling for display (v2)
drm/amd/pm: fix and simplify workload handling
Revert "drm/amd/pm: correct the workload setting"
drm/amdgpu: fix sriov reinit late orders
drm/amdgpu: Fix ISP hw init issue
drm/amd/display: Add hblank borrowing support
drm/amd/display: Limit VTotal range to max hw cap minus fp
drm/amd/display: Correct prefetch calculation
drm/amd/display: Add option to retrieve detile buffer size
drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
drm/amdkfd: hard-code cacheline for gc943,gc944
drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12
drm/amd/display: Fix programming backlight on OLED panels
drm/amd: Sanity check the ACPI EDID
drm/amdgpu/hdp7.0: do a posting read when flushing HDP
drm/amdgpu/hdp6.0: do a posting read when flushing HDP
drm/amdgpu/hdp5.2: do a posting read when flushing HDP
drm/amdgpu/hdp5.0: do a posting read when flushing HDP
drm/amdgpu/hdp4.0: do a posting read when flushing HDP
drm/amdgpu/jpeg1.0: fix idle work handler
A bus_dma_limit was added for l3 bus by commit cfb5d65f25
("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue
observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE
enabled.
Since kernel 5.13, the SATA issue can be reproduced again following
the SATA node move from L3 bus to L4_cfg in commit 8af15365a3
("ARM: dts: Configure interconnect target module for dra7 sata").
Fix it by adding an empty dma-ranges property to l4_cfg and
segment@100000 nodes (parent device tree node of SATA controller) to
inherit the 2GB dma ranges limit from l3 bus node.
Note: A similar fix was applied for PCIe controller by commit
90d4d3f4ea ("ARM: dts: dra7: Fix bus_dma_limit for PCIe").
Fixes: 8af15365a3 ("ARM: dts: Configure interconnect target module for dra7 sata").
Link: https://lore.kernel.org/linux-omap/c583e1bb-f56b-4489-8012-ce742e85f233@smile.fr/
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Romain Naour <romain.naour@skf.com>
Link: https://lore.kernel.org/r/20241115102537.1330300-1-romain.naour@smile.fr
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- performance counter fix.
-----BEGIN PGP SIGNATURE-----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=NMaJ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Pretty quiet week which is probably expected after US holidays, the
dma-fence and displayport MST message handling fixes make up the bulk
of this, along with a couple of minor xe and other driver fixes.
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- Performance counter fix"
* tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/v3d: Enable Performance Counters before clearing them
drm/dp_mst: Use reset_msg_rx_state() instead of open coding it
drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req()
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
drm/dp_mst: Fix down request message timeout handling
drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep()
drm/dp_mst: Verify request type in the corresponding down message reply
drm/dp_mst: Fix resetting msg rx state after topology removal
drm/xe: Move the coredump registration to the worker thread
drm/xe/guc: Fix missing init value and add register order check
drm/sti: Add __iomem for mixer_dbg_mxn's parameter
drm/dp_mst: Fix MST sideband message body length check
dma-buf: fix dma_fence_array_signaled v4
dma-fence: Use kernel's sort for merging fences
dma-fence: Fix reference leak on fence merge failure path
A collection of small fixes that have been gathered in the week.
- Fix the missing XRUN handling in USB-audio low latency mode
- Fix regression by the previous USB-audio hadening change
- Clean up old SH sound driver to use the standard helpers
- A few further fixes for MIDI 2.0 UMP handling
- Various HD-audio and USB-audio quirks
- Fix jack handling at PM on ASoC Intel AVS
- Misc small fixes for ASoC SOF and Mediatek
-----BEGIN PGP SIGNATURE-----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=WExA
-----END PGP SIGNATURE-----
Merge tag 'sound-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered in the week.
- Fix the missing XRUN handling in USB-audio low latency mode
- Fix regression by the previous USB-audio hadening change
- Clean up old SH sound driver to use the standard helpers
- A few further fixes for MIDI 2.0 UMP handling
- Various HD-audio and USB-audio quirks
- Fix jack handling at PM on ASoC Intel AVS
- Misc small fixes for ASoC SOF and Mediatek"
* tag 'sound-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix spelling mistake "Firelfy" -> "Firefly"
ASoC: mediatek: mt8188-mt6359: Remove hardcoded dmic codec
ALSA: hda/realtek: fix micmute LEDs don't work on HP Laptops
ALSA: usb-audio: Add extra PID for RME Digiface USB
ALSA: usb-audio: Fix a DMA to stack memory bug
ASoC: SOF: ipc3-topology: fix resource leaks in sof_ipc3_widget_setup_comp_dai()
ALSA: hda/realtek: Add support for Samsung Galaxy Book3 360 (NP730QFG)
ASoC: Intel: avs: da7219: Remove suspend_pre() and resume_post()
ALSA: hda/tas2781: Fix error code tas2781_read_acpi()
ALSA: hda/realtek: Enable mute and micmute LED on HP ProBook 430 G8
ALSA: usb-audio: add mixer mapping for Corsair HS80
ALSA: ump: Shut up truncated string warning
ALSA: sh: Use standard helper for buffer accesses
ALSA: usb-audio: Notify xrun for low-latency mode
ALSA: hda/conexant: fix Z60MR100 startup pop issue
ALSA: ump: Update legacy substream names upon FB info update
ALSA: ump: Indicate the inactive group in legacy substream names
ALSA: ump: Don't open legacy substream for an inactive group
ALSA: seq: ump: Fix seq port updates per FB info notify
A couple of small fixes, fixing an incorrect format specifier in a log
message and adding missing cleanup of the devres data used to support
dev_get_regmap() when a device is unregistered.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdTGowACgkQJNaLcl1U
h9B2+Af/aBMFY6CLBtJ9TUXNZY6ikkbx9U5WVdltnwqSLr6gCy2MjMYbMUgY97xc
z04Aw0xo+Wtz4jnKFz0FSAxIfHfSOkGBeZNlGWGah1dqCun0glNSQDDHWXkPFuMx
TIZJQh2gg5cEykGD9IAgOjX0ZNKW6EjLZyNPwAkEa87ugceyiC6rM3AKVPuVU0g2
tsFBOrJpJ3dJJGGBpGgtjo8YgcEC0NnGSizbggAauY4uAM3E9eeTfNoXgRi/bMzS
SLu20ER/5sF71VdzExoAy8j3JrBKUjemHyurTjn6AEbZ6k7WXZhjKSh6crNlxfl9
k2uaPL8VllPXsvaMUdfzG2MnDn1a7A==
=IzC3
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, fixing an incorrect format specifier in a log
message and adding missing cleanup of the devres data used to support
dev_get_regmap() when a device is unregistered"
* tag 'regmap-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: detach regmap from dev on regmap_exit
regmap: Use correct format specifier for logging range errors
A few small driver specific fixes and device ID updates for SPI. The
Apple change flags the driver as being compatible with the core's GPIO
chip select support, fixing support for some systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdTF8cACgkQJNaLcl1U
h9AqQwf6AwgAgr6L9LjQreR3e9XRmmIc9JVNd6ehPB180IcX0i7BDaPYBhKXemK1
iJfGHLEQ+FD30aBo5MEPnQvv31xLPoV04jP5lNe+4qxuFtEbCe6nfY/gjezUhKF/
o+1X3qS16VJexHn6n7y6thlOKqFQCS5yqARcyi1d7pt3nCPDhoRehNR5YKEsKq7J
HpIVHuac6NKAtkQjSDfEGA/yeZ00nAbRdjanz23eMyk0U0O09sWy1ZCPqk0QVeQG
fR0hVNQDVD0Inv/5bPd+IIkZiiy9ukiyjRpIE0mp0ZFeMHBq5oD7eJFPFSj/oRIz
Glo244zFeo0+CyfXmFzFaq7auIuPsA==
=ZVd9
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes and device ID updates for SPI.
The Apple change flags the driver as being compatible with the core's
GPIO chip select support, fixing support for some systems"
* tag 'spi-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Fix the IS_ERR() bug for devm_clk_get_optional_enabled()
spi: intel: Add Panther Lake SPI controller support
spi: apple: Set use_gpio_descriptors to true
spi: mpc52xx: Add cancel_work_sync before module remove
- Further prevent card detect during shutdown
MMC host:
- sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet
-----BEGIN PGP SIGNATURE-----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=NNUN
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Core:
- Further prevent card detect during shutdown
Host drivers:
- sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10
tablet"
* tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Further prevent card detect during shutdown
mmc: sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet
- Fix a couple of memory-leaks during genpd init/remove
pmdomain providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain layer
-----BEGIN PGP SIGNATURE-----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=fCUR
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
Rename the helper to better reflect its function.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20241202073139.448208-1-kirill.shutemov@linux.intel.com
When ensuring EFER.AUTOIBRS is set, WARN only on a negative return code
from msr_set_bit(), as '1' is used to indicate the WRMSR was successful
('0' indicates the MSR bit was already set).
Fixes: 8cc68c9c9e ("x86/CPU/AMD: Make sure EFER[AIBRSE] is set")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/Z1MkNofJjt7Oq0G6@google.com
Closes: https://lore.kernel.org/all/20241205220604.GA2054199@thelio-3990X
The selftests build four kernel modules which use copy-pasted Makefile
targets. This is a bit messy, and doesn't scale so well when we add more
modules, so let's consolidate these rules into a single rule generated
for each module name, and move the module sources into a single
directory.
To avoid parallel builds of the different modules stepping on each
other's toes during the 'modpost' phase of the Kbuild 'make modules',
the module files should really be a grouped target. However, make only
added explicit support for grouped targets in version 4.3, which is
newer than the minimum version supported by the kernel. However, make
implicitly treats pattern matching rules with multiple targets as a
grouped target, so we can work around this by turning the rule into a
pattern matching target. We do this by replacing '.ko' with '%ko' in the
targets with subst().
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/20241204-bpf-selftests-mod-compile-v5-1-b96231134a49@redhat.com
With the new __counted_by annocation in ljca_gpio_packet, the "num"
struct member must be set before accessing the "item" array. Failing to
do so will trigger a runtime warning when enabling CONFIG_UBSAN_BOUNDS
and CONFIG_FORTIFY_SOURCE.
Fixes: 1034cc423f ("gpio: update Intel LJCA USB GPIO driver")
Cc: stable@vger.kernel.org
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://lore.kernel.org/stable/20241203141451.342316-1-lihaoyu499%40gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Hou Tao says:
====================
This patch set fixes several issues for LPM trie. These issues were
found during adding new test cases or were reported by syzbot.
The patch set is structured as follows:
Patch #1~#2 are clean-ups for lpm_trie_update_elem().
Patch #3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie.
Patch #4 fixes the accounting of n_entries when doing in-place update.
Patch #5 fixes the exact match condition in trie_get_next_key() and it
may skip keys when the passed key is not found in the map.
Patch #6~#7 switch from kmalloc() to bpf memory allocator for LPM trie
to fix several lock order warnings reported by syzbot. It also enables
raw_spinlock_t for LPM trie again. After these changes, the LPM trie will
be closer to being usable in any context (though the reentrance check of
trie->lock is still missing, but it is on my todo list).
Patch #8: move test_lpm_map to map_tests to make it run regularly.
Patch #9: add test cases for the issues fixed by patch #3~#5.
Please see individual patches for more details. Comments are always
welcome.
Change Log:
v3:
* patch #2: remove the unnecessary NULL-init for im_node
* patch #6: alloc the leaf node before disabling IRQ to low
the possibility of -ENOMEM when leaf_size is large; Free
these nodes outside the trie lock (Suggested by Alexei)
* collect review and ack tags (Thanks for Toke & Daniel)
v2: https://lore.kernel.org/bpf/20241127004641.1118269-1-houtao@huaweicloud.com/
* collect review tags (Thanks for Toke)
* drop "Add bpf_mem_cache_is_mergeable() helper" patch
* patch #3~#4: add fix tag
* patch #4: rename the helper to trie_check_add_elem() and increase
n_entries in it.
* patch #6: use one bpf mem allocator and update commit message to
clarify that using bpf mem allocator is more appropriate.
* patch #7: update commit message to add the possible max running time
for update operation.
* patch #9: update commit message to specify the purpose of these test
cases.
v1: https://lore.kernel.org/bpf/20241118010808.2243555-1-houtao@huaweicloud.com/
====================
Link: https://lore.kernel.org/all/20241206110622.1161752-1-houtao@huaweicloud.com/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add more test cases for LPM trie in test_maps:
1) test_lpm_trie_update_flags
It constructs various use cases for BPF_EXIST and BPF_NOEXIST and check
whether the return value of update operation is expected.
2) test_lpm_trie_update_full_maps
It tests the update operations on a full LPM trie map. Adding new node
will fail and overwriting the value of existed node will succeed.
3) test_lpm_trie_iterate_strs and test_lpm_trie_iterate_ints
There two test cases test whether the iteration through get_next_key is
sorted and expected. These two test cases delete the minimal key after
each iteration and check whether next iteration returns the second
minimal key. The only difference between these two test cases is the
former one saves strings in the LPM trie and the latter saves integers.
Without the fix of get_next_key, these two cases will fail as shown
below:
test_lpm_trie_iterate_strs(1091):FAIL:iterate #2 got abc exp abS
test_lpm_trie_iterate_ints(1142):FAIL:iterate #1 got 0x2 exp 0x1
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-10-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move test_lpm_map.c to map_tests/ to include LPM trie test cases in
regular test_maps run. Most code remains unchanged, including the use of
assert(). Only reduce n_lookups from 64K to 512, which decreases
test_lpm_map runtime from 37s to 0.7s.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-9-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After switching from kmalloc() to the bpf memory allocator, there will be
no blocking operation during the update of LPM trie. Therefore, change
trie->lock from spinlock_t to raw_spinlock_t to make LPM trie usable in
atomic context, even on RT kernels.
The max value of prefixlen is 2048. Therefore, update or deletion
operations will find the target after at most 2048 comparisons.
Constructing a test case which updates an element after 2048 comparisons
under a 8 CPU VM, and the average time and the maximal time for such
update operation is about 210us and 900us.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Multiple syzbot warnings have been reported. These warnings are mainly
about the lock order between trie->lock and kmalloc()'s internal lock.
See report [1] as an example:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7-syzkaller-00003-g4376e966ecb7 #0 Not tainted
------------------------------------------------------
syz.3.2069/15008 is trying to acquire lock:
ffff88801544e6d8 (&n->list_lock){-.-.}-{2:2}, at: get_partial_node ...
but task is already holding lock:
ffff88802dcc89f8 (&trie->lock){-.-.}-{2:2}, at: trie_update_elem ...
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&trie->lock){-.-.}-{2:2}:
__raw_spin_lock_irqsave
_raw_spin_lock_irqsave+0x3a/0x60
trie_delete_elem+0xb0/0x820
___bpf_prog_run+0x3e51/0xabd0
__bpf_prog_run32+0xc1/0x100
bpf_dispatcher_nop_func
......
bpf_trace_run2+0x231/0x590
__bpf_trace_contention_end+0xca/0x110
trace_contention_end.constprop.0+0xea/0x170
__pv_queued_spin_lock_slowpath+0x28e/0xcc0
pv_queued_spin_lock_slowpath
queued_spin_lock_slowpath
queued_spin_lock
do_raw_spin_lock+0x210/0x2c0
__raw_spin_lock_irqsave
_raw_spin_lock_irqsave+0x42/0x60
__put_partials+0xc3/0x170
qlink_free
qlist_free_all+0x4e/0x140
kasan_quarantine_reduce+0x192/0x1e0
__kasan_slab_alloc+0x69/0x90
kasan_slab_alloc
slab_post_alloc_hook
slab_alloc_node
kmem_cache_alloc_node_noprof+0x153/0x310
__alloc_skb+0x2b1/0x380
......
-> #0 (&n->list_lock){-.-.}-{2:2}:
check_prev_add
check_prevs_add
validate_chain
__lock_acquire+0x2478/0x3b30
lock_acquire
lock_acquire+0x1b1/0x560
__raw_spin_lock_irqsave
_raw_spin_lock_irqsave+0x3a/0x60
get_partial_node.part.0+0x20/0x350
get_partial_node
get_partial
___slab_alloc+0x65b/0x1870
__slab_alloc.constprop.0+0x56/0xb0
__slab_alloc_node
slab_alloc_node
__do_kmalloc_node
__kmalloc_node_noprof+0x35c/0x440
kmalloc_node_noprof
bpf_map_kmalloc_node+0x98/0x4a0
lpm_trie_node_alloc
trie_update_elem+0x1ef/0xe00
bpf_map_update_value+0x2c1/0x6c0
map_update_elem+0x623/0x910
__sys_bpf+0x90c/0x49a0
...
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&trie->lock);
lock(&n->list_lock);
lock(&trie->lock);
lock(&n->list_lock);
*** DEADLOCK ***
[1]: https://syzkaller.appspot.com/bug?extid=9045c0a3d5a7f1b119f7
A bpf program attached to trace_contention_end() triggers after
acquiring &n->list_lock. The program invokes trie_delete_elem(), which
then acquires trie->lock. However, it is possible that another
process is invoking trie_update_elem(). trie_update_elem() will acquire
trie->lock first, then invoke kmalloc_node(). kmalloc_node() may invoke
get_partial_node() and try to acquire &n->list_lock (not necessarily the
same lock object). Therefore, lockdep warns about the circular locking
dependency.
Invoking kmalloc() before acquiring trie->lock could fix the warning.
However, since BPF programs call be invoked from any context (e.g.,
through kprobe/tracepoint/fentry), there may still be lock ordering
problems for internal locks in kmalloc() or trie->lock itself.
To eliminate these potential lock ordering problems with kmalloc()'s
internal locks, replacing kmalloc()/kfree()/kfree_rcu() with equivalent
BPF memory allocator APIs that can be invoked in any context. The lock
ordering problems with trie->lock (e.g., reentrance) will be handled
separately.
Three aspects of this change require explanation:
1. Intermediate and leaf nodes are allocated from the same allocator.
Since the value size of LPM trie is usually small, using a single
alocator reduces the memory overhead of the BPF memory allocator.
2. Leaf nodes are allocated before disabling IRQs. This handles cases
where leaf_size is large (e.g., > 4KB - 8) and updates require
intermediate node allocation. If leaf nodes were allocated in
IRQ-disabled region, the free objects in BPF memory allocator would not
be refilled timely and the intermediate node allocation may fail.
3. Paired migrate_{disable|enable}() calls for node alloc and free. The
BPF memory allocator uses per-CPU struct internally, these paired calls
are necessary to guarantee correctness.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
trie_get_next_key() uses node->prefixlen == key->prefixlen to identify
an exact match, However, it is incorrect because when the target key
doesn't fully match the found node (e.g., node->prefixlen != matchlen),
these two nodes may also have the same prefixlen. It will return
expected result when the passed key exist in the trie. However when a
recently-deleted key or nonexistent key is passed to
trie_get_next_key(), it may skip keys and return incorrect result.
Fix it by using node->prefixlen == matchlen to identify exact matches.
When the condition is true after the search, it also implies
node->prefixlen equals key->prefixlen, otherwise, the search would
return NULL instead.
Fixes: b471f2f1de ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a LPM trie is full, in-place updates of existing elements
incorrectly return -ENOSPC.
Fix this by deferring the check of trie->n_entries. For new insertions,
n_entries must not exceed max_entries. However, in-place updates are
allowed even when the trie is full.
Fixes: b95a5c4db0 ("bpf: add a longest prefix match trie map implementation")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the currently missing handling for the BPF_EXIST and BPF_NOEXIST
flags. These flags can be specified by users and are relevant since LPM
trie supports exact matches during update.
Fixes: b95a5c4db0 ("bpf: add a longest prefix match trie map implementation")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no need to call kfree(im_node) when updating element fails,
because im_node must be NULL. Remove the unnecessary kfree() for
im_node.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When "node->prefixlen == matchlen" is true, it means that the node is
fully matched. If "node->prefixlen == key->prefixlen" is false, it means
the prefix length of key is greater than the prefix length of node,
otherwise, matchlen will not be equal with node->prefixlen. However, it
also implies that the prefix length of node must be less than
max_prefixlen.
Therefore, "node->prefixlen == trie->max_prefixlen" will always be false
when the check of "node->prefixlen == key->prefixlen" returns false.
Remove this unnecessary comparison.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Registering and unregistering cpuhp callback requires global cpu hotplug lock,
which is used everywhere. Meantime q->sysfs_lock is used in block layer
almost everywhere.
It is easy to trigger lockdep warning[1] by connecting the two locks.
Fix the warning by moving blk-mq's cpuhp callback registering out of
q->sysfs_lock. Add one dedicated global lock for covering registering &
unregistering hctx's cpuhp, and it is safe to do so because hctx is
guaranteed to be live if our request_queue is live.
[1] https://lore.kernel.org/lkml/Z04pz3AlvI4o0Mr8@agluck-desk3/
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Newman <peternewman@google.com>
Cc: Babu Moger <babu.moger@amd.com>
Reported-by: Luck Tony <tony.luck@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20241206111611.978870-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to retrieve 'hctx' from xarray table in the cpuhp callback, so the
callback should be registered after this 'hctx' is added to xarray table.
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Newman <peternewman@google.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Luck Tony <tony.luck@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20241206111611.978870-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's no longer practical for the OMAP IOMMU driver to trick
arm_setup_iommu_dma_ops() into ignoring its presence, so let's use the
same tactic as other IOMMU API users on 32-bit ARM and explicitly kick
the arch code's dma_iommu_mapping out of the way to avoid problems.
Fixes: 4720287c7b ("iommu: Remove struct iommu_ops *iommu from arch_setup_dma_ops()")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/6186e311cb6f64a787f87fd41e49a73f409b789c.1730136799.git.robin.murphy@arm.com
[Fixed changelog title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The Macronix mx25u25635f flash device supports SFDP initialization.
This commit removes the specific mx25u25635f entry (NOR ID 0xc22539),
along with its size and flags, from the NOR parts list. By removing
this entry, both mx25u25635f and mx25u25645g (which share the same
NOR ID) will utilize the generic flash driver configuration.
This change allows both devices (mx25u25635f and mx25u25645g) to
leverage SFDP-defined parameters, enabling dual and quad read
operations without the need for manual adjustment of no_sfdp_flags.
Link: https://www.macronix.com/Lists/Datasheet/Attachments/8663/MX25U25635F,%201.8V,%20256Mb,%20v1.5.pdf
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20241105105844.257676-1-parth105105@gmail.com
SPI NOR flashes needs power supply to work properly. The power supply
maybe software controllable per board design. So add the support
for an vcc-supply regulator.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
[ta: move devm_regulator_get_enable() to spi_nor_probe().]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20241111111946.9048-3-tudor.ambarus@linaro.org
Use a local variable for the struct device pointers to avoid
dereferencing.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20241111111946.9048-2-tudor.ambarus@linaro.org
Introduce optional vcc-supply property, SPI NOR flashes needs power supply
to work properly. The power supply maybe software controlable per board
design.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20241111111946.9048-1-tudor.ambarus@linaro.org
For historical reasons, the legacy decompressor code on various
architectures supports 7 different compression types for the compressed
kernel image.
EFI zboot is not a compression library museum, and so the options can be
limited to what is likely to be useful in practice:
- GZIP is tried and tested, and is still one of the fastest at
decompression time, although the compression ratio is not very high;
moreover, Fedora is already shipping EFI zboot kernels for arm64 that
use GZIP, and QEMU implements direct support for it when booting a
kernel without firmware loaded;
- ZSTD has a very high compression ratio (although not the highest), and
is almost as fast as GZIP at decompression time.
Reducing the number of options makes it less of a hassle for other
consumers of the EFI zboot format (such as QEMU today, and kexec in the
future) to support it transparently without having to carry 7 different
decompression libraries.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
BO validation during vm_bind could trigger memory eviction when
system runs under memory pressure. Right now we blindly evict
BOs of all VMs. This scheme has a problem when system runs in
none recoverable page fault mode: even though the vm_bind could
be successful by evicting BOs, the later the rebinding of the
evicted BOs would fail. So it is better to report an out-of-
memory failure at vm_bind time than at time of rebinding where
xekmd currently doesn't have a good mechanism to report error
to user space.
This patch implemented a scheme to only evict objects of other
VMs during vm_bind time. Object of the same VM will skip eviction.
If we failed to find enough memory for vm_bind, we report error
to user space at vm_bind time.
This scheme is not needed for recoverable page fault mode under
what we can dynamically fault-in pages on demand.
v1: Use xe_vm_in_preempt_fence_mode instead of stack variable (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203021929.1919730-1-oak.zeng@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The platform device named "rzg2l-usb-vbus-regulator", allocated by
the rzg2l-usbphy-ctrl driver, is used to instantiate a regulator driver.
This regulator driver is associated with a device tree (DT) node, which
is a child of the rzg2l-usbphy-ctrl DT node. The regulator's DT node allows
consumer nodes to reference the regulator and configure the regulator as
needed.
Starting with commit cd7a38c40b ("regulator: core: do not silently ignore
provided init_data") the struct regulator_dev::dev::of_node is no longer
populated using of_node_get(config->of_node) if the regulator does not
provide init_data. Since the rzg2l-usb-vbus-regulator does not provide
init_data, this behaviour causes the of_find_regulator_by_node() function
to fails, resulting in errors when attempting to request the regulator.
To fix this issue, call device_set_of_node_from_dev() for the
"rzg2l-usb-vbus-regulator" platform device.
Fixes: 84fbd61987 ("regulator: Add Renesas RZ/G2L USB VBUS regulator driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20241119085554.1035881-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use the nor->addr_nbytes set by the core, we shouldn't use
magic numbers or states that are not tracked by the core.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20241111113609.12093-1-tudor.ambarus@linaro.org
dfs_cache_refresh() delayed worker could race with cifs_put_tcon(), so
make sure to call list_replace_init() on @tcon->dfs_ses_list after
kworker is cancelled or finished.
Fixes: 4f42a8b54b ("smb: client: fix DFS interlink failover")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers which implement the SMB3.1.1 POSIX extensions did not
set the file type in the mode in the infolevel 100 response.
With the recent changes for checking the file type via the mode field,
this can cause the root directory to be reported incorrectly and
mounts (e.g. to ksmbd) to fail.
Fixes: 6a832bc8bb ("fs/smb/client: Implement new SMB3 POSIX type")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
