[Why]
Observe after suspend/resme, we can't light up mst monitors under specific
mst hub. The reason is that driver still writes DPCD DP_MSTM_CTRL after LT.
It's forbidden even we write the same value for that dpcd register.
[How]
We already resume the mst branch device dpcd settings during
resume_mst_branch_status(). Leverage drm_dp_mst_topology_queue_probe() to
only probe the topology, not calling drm_dp_mst_topology_mgr_resume() which
will set DP_MSTM_CTRL as well.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Move the wait for pending updates past prepare_bandwidth if the previous
update was not a full update to reduce the average time it takes to
complete a full update.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An upstream bug report suggests that there are production dGPUs that are
older than DCN401 but still have a umc_info in VBIOS tables with the
same version as expected for a DCN401 product. Hence, reading this
tables should be guarded with a version check.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
Adjust otg w/a disable condition to include HPO explicitly rather than
assuming it is implicitly used through DP2.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
Applying a hw w/a only relevant to DIG FIFO causing corruption
using HPO, do not apply the w/a if on DP2/HPO
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During boot up and resume the DC layer will reset the panel
brightness to fix a flicker issue.
It will cause the dm->actual_brightness is not the current panel
brightness level. (the dm->brightness is the correct panel level)
[How]
Set the backlight level after do the set mode.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: d9e865826c ("drm/amd/display: Simplify brightness initialization")
Reported-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3655
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During mode validation, there maybe modes that fail
max_downscale_src_width check and scaling_quality
taps are 0. This will cause an assert to trigger
in spl_set_filters_data() because taps are 0.
[How]
Move taps calculation for non-adaptive scaling mode
to separate function and call it
if max_downscale_src_width fails. This will
populate taps if scaling_quality taps are 0.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SEC_CNTL isn't readable by x86 and can block Z8 entry if read.
[How]
Remove the read.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Code reading rxstatus message size was incorrectly assigning it to
uint8_t, despite the value being 10 bits long (lower byte plus lowest
2 bits from upper byte). This caused the highest 2 bits to be ignored,
potentially missing invalid values.
[How]
Change all local variables holding rxstatus message size from uint8_t
to uint16_t, as in mod_hdcp_message_hdcp2::rx_id_list_size.
Replaced untyped HDCP_2_2_HMID_RXSTATUS_MSG_SZ_HI macro with function
hdcp_2_2_hmid_rxstatus_msg_sz(const uint8_t[2]) to encapsulate entire
calculation and return a typed result.
Removed spaces mixed with tabs to fix indentation on modified lines.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was found by a static analyzer.
There may be a potential integer overflow issue in
unstripe_ctr(). uc->unstripe_offset and uc->unstripe_width are
defined as "sector_t"(uint64_t), while uc->unstripe,
uc->chunk_size and uc->stripes are all defined as "uint32_t".
The result of the calculation will be limited to "uint32_t"
without correct casting.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: 18a5bf2705 ("dm: add unstriped target")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
This reverts commit 4f01a68751.
[why & how]
The offending commit caused a lighting issue for Samsung Odyssey G9
monitors when connecting via USB-C. The commit was intended to block certain UHBR rates.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
insert divided by zero protection
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Tearing can occur if there is a flip immediate plane and SW cursor.
check_subvp_sw_cursor_fallback_req falls back to SW cursor if the
stream has the potential to use subVP.
Check for fallback not needed if HW cursor is required.
e.g. Fullscreen gaming
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use string choice helpers for better readability.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202410161814.I6p2Nnux-lkp@intel.com/
Signed-off-by: R Sundar <prosunofficial@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 040fdcde28 ("drm/amdgpu: respect the abmlevel module parameter value
if it is set"), the default value for amdgpu.abmlevel was set to -1, or auto.
However, the comment explaining the default value was not updated to reflect
the change (-1, or auto; not -1, or disabled).
Clarify that the default value (-1) means auto.
Fixes: 040fdcde28 ("drm/amdgpu: respect the abmlevel module parameter value if it is set")
Reported-by: Ruikai Liu <rickliu2000@outlook.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the past these specialized on chip memory pools were reported as system
memory (aka 'cpu') which was not correct and misleading. That has since
been removed so lets make them visible as their own respective memory
regions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Yunxiang Li <Yunxiang.Li@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So far these specialized on chip memory pools were reported as system
memory (aka 'cpu') which is not correct and misleading. Lets remove that
and consider later making them visible as their own thing.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Yunxiang Li <Yunxiang.Li@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since on modern systems all of vram can be made visible anyways, to
simplify the new implementation, drops tracking how much memory is
visible for now. If this is really needed we can add it back on top of
the new implementation, or just report all the BOs as visible.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pkey_sighandler_tests.c makes raw syscalls using its own helper,
syscall_raw(). One of those syscalls is clone, which is problematic
as every architecture has a different opinion on the order of its
arguments.
To complete arm64 support, we therefore add an appropriate
implementation in syscall_raw(), and introduce a clone_raw() helper
that shuffles arguments as needed for each arch.
Having done this, we enable building pkey_sighandler_tests for arm64
in the Makefile.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241029144539.111155-6-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
pkey_sighandler_tests.c currently hardcodes x86 PKRU encodings. The
first step towards running those tests on arm64 is to abstract away
the pkey register values.
Since those tests want to deny access to all keys except a few,
we have each arch define PKEY_REG_ALLOW_NONE, the pkey register value
denying access to all keys. We then use the existing set_pkey_bits()
helper to grant access to specific keys.
Because pkeys may also remove the execute permission on arm64, we
need to be a little careful: all code is mapped with pkey 0, and we
need it to remain executable. pkey_reg_restrictive_default() is
introduced for that purpose: the value it returns prevents RW access
to all pkeys, but retains X permission for pkey 0.
test_pkru_preserved_after_sigusr1() only checks that the pkey
register value remains unchanged after a signal is delivered, so the
particular value is irrelevant. We enable pkey 0 and a few more
arbitrary keys in the smallest range available on all architectures
(8 keys on arm64).
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241029144539.111155-5-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 33f082614c ("arm64: signal: Allow expansion of the signal
frame") introduced the BASE_SIGFRAME_SIZE macro but it has
apparently never been used; just remove it.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241029144539.111155-4-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The POE frame record is allocated unconditionally if POE is
supported. If the allocation fails, a SIGSEGV is delivered before
setup_sigframe() can be reached. As a result there is no need to
consider poe_offset before saving POR_EL0; just remove that check.
This is in line with other frame records (FPMR, TPIDR2).
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241029144539.111155-3-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The old behavior reports the resident memory usage for this key and the
documentation say so as well. However this was accidentally changed to
include buffers that was evicted.
Fixes: 04bdba4654 ("drm/amdgpu: Use drm_print_memory_stats helper from fdinfo")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix two issues with memory allocation in amdgpu_discovery_get_nps_info()
for mem_ranges:
- Add a check for allocation failure to avoid dereferencing a null
pointer.
- As suggested by Christophe, use kvcalloc() for memory allocation,
which checks for multiplication overflow.
Additionally, assign the output parameters nps_type and range_cnt after
the kvcalloc() call to prevent modifying the output parameters in case
of an error return.
Fixes: b194d21b9b ("drm/amdgpu: Use NPS ranges from discovery table")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add messages to make it clear when a per ring reset
happens. This is helpful for debugging and aligns with
other reset methods.
v2: add ring name in success/fail messages (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure KFD gets a turn when serializing access to
the GC IP. Currently non-KFD jobs can starve KFD if they
submit often enough. This patch prevents that by stalling
non-KFD if its time period has elapsed.
v2: fix units
v3: check enablement properly
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c2c2ce1e96 ("drm/amd/display: Optimize passive update planes.")
removed the last caller of context_timing_trace.
Remove it.
With that gone, no one is now looking at the 'timing_trace' flag, remove
it and all the places that set it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cm3_helper_translate_curve_to_degamma_hw_format() since it was added in
2020's commit
03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
calculate_user_regamma_coeff() and calculate_user_regamma_ramp() were
added in 2018 in commit
55a01d4023 ("drm/amd/display: Add user_regamma to color module")
but never used.
Remove them and their helpers.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an interface to query whether KFD has any active queues.
v2: fix build issues
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PTE_TYPE_PAGE bits were being set in pte_mkcont() because PTE_TABLE_BIT
was being cleared in pte_mkhuge(). But after arch_make_huge_pte()
modification in commit f8192813dc ("arm64/mm: Re-organize
arch_make_huge_pte()"), which dropped pte_mkhuge() completely, setting
back PTE_TYPE_PAGE bits is no longer necessary. Change pte_mkcont() to
only set PTE_CONT.
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241104041617.3804617-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
cpupower second update for Linux 6.13-rc1
- add Chinese Simplified translation for cpufrequtils package
- add checks for dependencies, xgettext and msgfmt before
attempting to generate GNU gettext Language Translations.
-----BEGIN PGP SIGNATURE-----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=Vbqp
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.13-rc1-update2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge one more cpupower utility update for 6.13-rc1 from Shuah Khan:
"- add Chinese Simplified translation for cpufrequtils package
- add checks for dependencies, xgettext and msgfmt before
attempting to generate GNU gettext Language Translations."
* tag 'linux-cpupower-6.13-rc1-update2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: add checks for xgettext and msgfmt
cpupower: Add Chinese Simplified translation
Flush the g2h worker explicitly if TLB timeout happens which is
observed on LNL and that points to the recent scheduling issue with
E-cores on LNL.
This is similar to the recent fix:
commit e515272338 ("drm/xe/guc/ct: Flush g2h worker in case of g2h
response timeout") and should be removed once there is E core
scheduling fix.
v2: Add platform check(Himal)
v3: Remove gfx platform check as the issue related to cpu
platform(John)
Use the common WA macro(John) and print when the flush
resolves timeout(Matt B)
v4: Remove the resolves log and do the flush before taking
pending_lock(Matt A)
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2687
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-3-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit e1f6fa5566)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Flush xe ordered_wq in case of ufence timeout which is observed
on LNL and that points to recent scheduling issue with E-cores.
This is similar to the recent fix:
commit e515272338 ("drm/xe/guc/ct: Flush g2h worker in case of g2h
response timeout") and should be removed once there is a E-core
scheduling fix for LNL.
v2: Add platform check(Himal)
s/__flush_workqueue/flush_workqueue(Jani)
v3: Remove gfx platform check as the issue related to cpu
platform(John)
v4: Use the Common macro(John) and print when the flush resolves
timeout(Matt B)
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2754
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-2-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 38c4c8722b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Move LNL scheduling WA to xe_device.h so this can be used in other
places without needing keep the same comment about removal of this WA
in the future. The WA, which flushes work or workqueues, is now wrapped
in macros and can be reused wherever needed.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
cc: stable@vger.kernel.org # v6.11+
Suggested-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-1-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit cbe006a649)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Drop the exclusive client count tracking and use the filelist from the
drm to track the active clients. This also ensures the clients created
internally by the driver won't block changing the ccs mode.
Fixes: ce8c161cba ("drm/xe: Add ref counting for xe_file")
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008073628.377433-3-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1c35f1ed1f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
CCS_MODE register requires setting mask bits from Xe2+ platforms. Set
the mask bits unconditionally, as those bits are unused for older
platforms.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008073628.377433-2-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 23ea2c7572)
[ Fix conflict with mmio refactors ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Baryshkov)
- Fix sampling handler context ptr in the libthermal (Emil Dahl Juhl)
- Remove the thermal soft link when doing a make clean. The link is
created at compilation time (Zhang Jiao)
- Accept thermal zone without trip points as stated in the bindings,
otherwise the thermal zone fails to initialize (Icenowy Zheng)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmco62wACgkQqDIjiipP
6E/WlQf/atNDrm85oN/reH5f3ak/VaxiGQ1IVPKsqMqZKkXPn54c1BU7S72hcXk/
IAWaCWWxOOWl33OvNdf4hfgbf2qzwAuJmlcIB7kvEZXFOGS9MkkNlVgRL8Z8HvPm
yLuUMHTQpJERV/BrDj/ScepvFccuGlw2Sd5hUFZwGLlbWuj10WlqnWh7z3b6L834
OYu+VqEZCjGPH4ChcxQ9hZm5qDhB48RHAAcx7T83jctPMqzjfp2qN1zpHhauXtSU
zMAZ2xap+WhpKFFej6X+SlsbIeGi7rvSXGRRysv/KYZsW+ecUXQuU9auGPs0CcMH
OEBwsdH037a/lDRhYqf3i8M1dr1gcQ==
=Eq8T
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver fixes for 6.12-rc7 from Daniel Lezcano:
"- Remove a false lockdep backtrace in the LMh driver (Dmitry
Baryshkov)
- Fix sampling handler context ptr in the libthermal (Emil Dahl Juhl)
- Remove the thermal soft link when doing a make clean. The link is
created at compilation time (Zhang Jiao)
- Accept thermal zone without trip points as stated in the bindings,
otherwise the thermal zone fails to initialize (Icenowy Zheng)"
* tag 'thermal-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/of: support thermal zones w/o trips subnode
tools/lib/thermal: Remove the thermal.h soft link when doing make clean
tools/lib/thermal: Fix sampling handler context ptr
thermal/drivers/qcom/lmh: Remove false lockdep backtrace
When global LED brightness is changed by pressing the front button on
Turris Omnia, the MCU can produce an interrupt to the CPU. Add the
description of this interrupt to the LED controller node.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Multi-threaded buffered reads to the same file exposed significant
inode spinlock contention in nfs_clear_invalid_mapping().
Eliminate this spinlock contention by checking flags without locking,
instead using smp_rmb and smp_load_acquire accordingly, but then take
spinlock and double-check these inode flags.
Also refactor nfs_set_cache_invalid() slightly to use
smp_store_release() to pair with nfs_clear_invalid_mapping()'s
smp_load_acquire().
While this fix is beneficial for all multi-threaded buffered reads
issued by an NFS client, this issue was identified in the context of
surprisingly low LOCALIO performance with 4K multi-threaded buffered
read IO. This fix dramatically speeds up LOCALIO performance:
before: read: IOPS=1583k, BW=6182MiB/s (6482MB/s)(121GiB/20002msec)
after: read: IOPS=3046k, BW=11.6GiB/s (12.5GB/s)(232GiB/20001msec)
Fixes: 17dfeb9113 ("NFS: Fix races in nfs_revalidate_mapping")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Fix the possibility of racing nfs_local_probe() resulting in:
list_add double add: new=ffff8b99707f9f58, prev=ffff8b99707f9f58, next=ffffffffc0f30000.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Add nfs_uuid_init() to properly initialize all nfs_uuid_t members
(particularly its list_head).
Switch to returning bool from nfs_uuid_begin(), returns false if
nfs_uuid_t is already in-use (its list_head is on a list). Update
nfs_local_probe() to return early if the nfs_client's cl_uuid
(nfs_uuid_t) is in-use.
Also, switch nfs_uuid_begin() from using list_add_tail_rcu() to
list_add_tail() -- rculist was used in an earlier version of the
localio code that had a lockless nfs_uuid_lookup interface.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
When asked to set both an atime and an mtime to the current system time,
ensure that the setting is atomic by calling inode_update_timestamps()
only once with the appropriate flags.
Fixes: e12912d941 ("NFSv4: Add support for delegated atime and mtime attributes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
When the client does an exclusive create and the server decides to store
the verifier in the timestamps, a SETATTR is subsequently sent to fix up
those timestamps. When that is the case, suppress the exceptions for
attribute delegations in nfs4_bitmap_copy_adjust().
Fixes: 32215c1f89 ("NFSv4: Don't request atime/mtime/size if they are delegated to us")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
If a timeout is specified in the mount options, it currently applies to
both the NFS protocol and (with v3) the MOUNT protocol. This is
sensible when they both use the same underlying protocol, or those
protocols are compatible w.r.t timeouts as RDMA and TCP are.
However if, for example, NFS is using TCP and MOUNT is using UDP then
using the same timeout doesn't make much sense.
If you
mount -o vers=3,proto=tcp,mountproto=udp,timeo=600,retrans=5 \
server:/path /mountpoint
then the timeo=600 which was intended for the NFS/TCP request will
apply to the MOUNT/UDP requests with the result that there will only be
one request sent (because UDP has a maximum timeout of 60 seconds).
This is not what a reasonable person might expect.
This patch disables the sharing of timeout information in cases where
the underlying protocols are not compatible.
Fixes: c9301cb35b ("nfs: hornor timeo and retrans option when mounting NFSv3")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
xs_tcp_finish_connecting() can return -ENOTCONN but the switch statement
in xs_tcp_setup_socket() treats that as an unhandled error.
If we treat it as a known error it would propagate back to
call_connect_status() which does handle that error code. This appears
to be the intention of the commit (given below) which added -ENOTCONN as
a return status for xs_tcp_finish_connecting().
So add -ENOTCONN to the switch statement as an error to pass through to
the caller.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1231050
Link: https://access.redhat.com/discussions/3434091
Fixes: 01d37c428a ("SUNRPC: xprt_connect() don't abort the task if the transport isn't bound")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Currently, the cfg_1_9_0 which is being used for X1E80100 doesn't disable
ASPM L0s. However, hardware team recommends to disable L0s as the PHY init
sequence is not tuned support L0s. Hence reuse cfg_sc8280xp for X1E80100.
Note that the config_sid() callback is not present in cfg_sc8280xp, don't
concern about this because config_sid() callback is originally a no-op
for X1E80100.
Fixes: 6d0c39324c ("PCI: qcom: Add X1E80100 PCIe support")
Link: https://lore.kernel.org/r/20241101030902.579789-5-quic_qianyu@quicinc.com
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.9
The SC8280XP PCIe devicetree nodes do not specify an 'iommu-map' so
the config_sid() callback is effectively a no-op.
Hence introduce a new ops struct, namely ops_1_21_0 which is same as
ops_1_9_0 except that it doesn't have config_sid() callback to clean
it up.
Link: https://lore.kernel.org/r/20241101030902.579789-4-quic_qianyu@quicinc.com
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
