Support interfaces to get the raw data for each of
the resources. Use this interface to get some of the
HW structures from active resources.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730428483-17841-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implements support for querying the hardware resource
contexts. This raw data can be used for the debugging
of the field issues.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730428483-17841-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow users to dump driver specific resource details when
queried through rdma tool. This supports the driver data
for QP, CQ, MR and SRQ.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730428483-17841-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Same with commit e375b9c929 ("RDMA/cxgb4: Set queue pair state when
being queried"). The API for ib_query_qp requires the driver to set
cur_qp_state on return, add the missing set.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://patch.msgid.link/20241031092019.2138467-1-liujian56@huawei.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add drm_panic support for nv50+ cards.
It's enough to get the panic screen while running Gnome/Wayland with
an nv50+ nvidia GPU.
It doesn't support multi-plane or compressed format yet.
Tiling is tested on GTX1650 (Turing), GeForce GT 1030 (Pascal) and
Geforce 8800 GTS (Tesla).
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022185553.1103384-4-jfalempe@redhat.com
NXP ESDHC supports setting data timeout using uSDHCx_SYS_CTRL register
DTOCV bits (bits 16-19).
Currently the driver accesses those bits by 32-bit write using
SDHCI_TIMEOUT_CONTROL (0x2E) defined in drivers/mmc/host/sdhci.h.
This is offset by two bytes relative to uSDHCx_SYS_CTRL (0x2C).
The driver also defines ESDHC_SYS_CTRL_DTOCV_MASK as first 4 bits, which
is correct relative to SDHCI_TIMEOUT_CONTROL but not relative to
uSDHCx_SYS_CTRL. The definition carrying control register in its name is
therefore inconsistent.
Update the bitmask definition for bits 16-19 to be correct relative to
control register base.
Update the esdhc_set_timeout function to set timeout value at control
register base, not timeout offset.
This solves a purely cosmetic problem.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101-imx-emmc-reset-v3-2-184965eed476@solid-run.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
NXP ESDHC supports control of native emmc reset signal when pinmux is
set accordingly, using uSDHCx_SYS_CTRL register IPP_RST_N bit.
Documentation is available in NXP i.MX6Q Reference Manual.
Implement the hw_reset function in sdhci_ops asserting reset for at
least 1us and waiting at least 200us after deassertion.
Lower bounds are based on:
JEDEC Standard No. 84-B51, 6.15.10 H/W Reset Operation, page 159.
Upper bounds are chosen allowing flexibility to the scheduler.
Tested on SolidRun i.MX8DXL SoM with a scope, and confirmed that eMMC is
still accessible after boot:
- eMMC extcsd has RST_N_FUNCTION=0x01
- sdhc node has cap-mmc-hw-reset
- pinmux set for EMMC0_RESET_B
- Linux v5.15
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101-imx-emmc-reset-v3-1-184965eed476@solid-run.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There is a type issue in assignment in the sd_uhs2_dev_init(),
sd_uhs2_enum() and sd_uhs2_config_write() that will generate
a warning when building the kernel. Let's fix it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410260423.15jvE6qc-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410261827.7h8YK8u2-lkp@intel.com/
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Message-ID: <20241101104416.4954-2-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There is a type issue in the argument in the uhs2_dev_cmd()
that will generate a warning when building the kernel.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410260525.ZUuPhMJz-lkp@intel.com/
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Message-ID: <20241101104416.4954-1-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
CRTC creation uses drmm_crtc_init_with_planes(), which automatically
handles cleanup. However, an unnecessary call to drm_crtc_cleanup() is
still present in the vkms_output_init() error path.
Fixes: 99cc528ebe ("drm/vkms: Use drmm_crtc_init_with_planes()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031183835.3633-1-jose.exposito89@gmail.com
Acked-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The scancodes for the Mic Mute and Airplane keys on the Ideapad Pro 5
(14AHP9 at least, probably the other variants too) are different and
were not being picked up by the driver. This adds them to the keymap.
Apart from what is already supported, the remaining fn keys are
unfortunately producing windows-specific key-combos.
Signed-off-by: Renato Caldas <renato@calgera.com>
Link: https://lore.kernel.org/r/20241102183116.30142-1-renato@calgera.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some Alienware devices have a key that locks/unlocks the Meta key. This
key triggers a WMI event that should be ignored by the kernel, as it's
handled by internally the firmware.
There is no known way of changing this default behavior. The firmware
would lock/unlock the Meta key, regardless of how the event is handled.
Tested on an Alienware x15 R1.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241031154441.6663-2-kuurtb@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes the following error:
dell_smbios: Unable to run on non-Dell system
Which is triggered after dell-wmi driver fails to initialize on
Alienware systems, as it depends on dell-smbios.
This effectively extends dell-wmi, dell-smbios and dcdbas support to
Alienware devices, that might share some features of the SMBIOS intereface
calling interface with other Dell products.
Tested on an Alienware X15 R1.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241031154023.6149-2-kuurtb@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If amdtp_stream_init() fails in amdtp_tscm_init(), the latter returns zero,
though it's supposed to return error code, which is checked inside
init_stream() in file tascam-stream.c.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 47faeea25e ("ALSA: firewire-tascam: add data block processing layer")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241101185517.1819-1-m.masimov@maxima.ru
A couple of the fixed regulators in the Kukui dtsi do not actually
exist in the hardware design; they are simply power rails connected
together with 0 ohm bridges.
Drop them and assign their upstream supplies to their consumers instead.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.
Add the supplies for each of the fixed regulators.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their
associated nodes are incorrectly named. In particular, the 1.0V supply
was modeled as a 1.2V supply.
Fix all the incorrect names, and also fix the voltage of the 1.0V
regulator.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix DTBS check errors for 'mt6358codec' and 'mt6358regulator':
Error message is:
pmic: 'mt6358codec' and 'mt6358regulator' does not match any of the
regexes: 'pinctrl-[0-9]+'.
Rename these two device node to generic 'audio-codec' and 'regulators'.
Fixes: 9f88722216 ("arm64: dts: mt6358: add PMIC MT6358 related nodes")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20241029064647.13370-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The reset line of the IT6505 bridge chip is active low, not active high.
It was incorrectly inverted in the device tree as the implementation at
the time incorrectly inverted the polarity in its driver, due to a prior
device having an inline inverting level shifter.
Fix the polarity now while the external display pipeline is incomplete,
thereby avoiding any impact to running systems.
A matching fix for the driver should be included if this change is
backported.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241029100226.660263-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The legacy rawmidi tries to enumerate all possible UMP groups
belonging to the UMP endpoint. But currently it shows all 16 ports
when the UMP endpoint is configured with static blocks, although most
of them may be unused.
There was already a fix for the sequencer client side to ignore such
groups in the commit 3bfd7c0ba1 ("ALSA: seq: ump: Skip useless ports
for static blocks"), and this commit is a similar fix for UMP
rawmidi devices; it adds simply the check for the validity of each
group that has been already parsed. (Note that the group info was
moved to snd_ump_endpoint.groups[] by the commit 0642a3c5ca
("ALSA: ump: Update substream name from assigned FB names")).
Link: https://patch.msgid.link/20241104100735.16127-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messages in the kernel ring buffer:
amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340
Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message.
Link: https://lore.kernel.org/platform-driver-x86/c588ff5d-3e04-4549-9a86-284b9b4419ba@amd.com
Fixes: 3d7d407dfb ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241028180241.1341624-1-bugfood-ml@fatooh.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Wei Fang says:
====================
net: add basic support for i.MX95 NETC
This is first time that the NETC IP is applied on i.MX MPU platform.
Its revision has been upgraded to 4.1, which is very different from
the NETC of LS1028A (its revision is 1.0). Therefore, some existing
drivers of NETC devices in the Linux kernel are not compatible with
the current hardware. For example, the fsl-enetc driver is used to
drive the ENETC PF of LS1028A, but for i.MX95 ENETC PF, its registers
and tables configuration are very different from those of LS1028A,
and only the station interface (SI) part remains basically the same.
For the SI part, Vladimir has separated the fsl-enetc-core driver, so
we can reuse this driver on i.MX95. However, for other parts of PF,
the fsl-enetc driver cannot be reused, so the nxp-enetc4 driver is
added to support revision 4.1 and later.
During the development process, we found that the two PF drivers have
some interfaces with basically the same logic, and the only difference
is the hardware configuration. So in order to reuse these interfaces
and reduce code redundancy, we extracted these interfaces and compiled
them into a separate nxp-enetc-pf-common driver for use by the two PF
drivers.
In addition, we have developed the nxp-netc-blk-ctrl driver, which
is used to control three blocks, namely Integrated Endpoint Register
Block (IERB), Privileged Register Block (PRB) and NETCMIX block. The
IERB contains registers that are used for pre-boot initialization,
debug, and non-customer configuration. The PRB controls global reset
and global error handling for NETC. The NETCMIX block is mainly used
to set MII protocol and PCS protocol of the links, it also contains
settings for some other functions.
---
v1 Link: https://lore.kernel.org/imx/20241009095116.147412-1-wei.fang@nxp.com/
v2 Link: https://lore.kernel.org/imx/20241015125841.1075560-1-wei.fang@nxp.com/
v3 Link: https://lore.kernel.org/imx/20241017074637.1265584-1-wei.fang@nxp.com/
v4 Link: https://lore.kernel.org/imx/20241022055223.382277-1-wei.fang@nxp.com/
v5 Link: https://lore.kernel.org/imx/20241024065328.521518-1-wei.fang@nxp.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add related YAML documentation and header files. Also, add maintainers
from the i.MX side as ENETC starts to be used on i.MX platforms.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The i.MX95 ENETC has been upgraded to revision 4.1, which is different
from the LS1028A ENETC (revision 1.0) except for the SI part. Therefore,
the fsl-enetc driver is incompatible with i.MX95 ENETC PF. So add new
nxp-enetc4 driver to support i.MX95 ENETC PF, and this driver will be
used to support the ENETC PF with major revision 4 for other SoCs in the
future.
Currently, the nxp-enetc4 driver only supports basic transmission feature
for i.MX95 ENETC PF, the more basic and advanced features will be added
in the subsequent patches. In addition, PCS support has not been added
yet, so 10G ENETC (ENETC instance 2) is not supported now.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a situation where num_tx_rings cannot be divided by bdr_int_num.
For example, num_tx_rings is 8 and bdr_int_num is 3. According to the
previous logic, this results in two tx_bdr corresponding memories not
being allocated, so when sending packets to tx ring 6 or 7, wild pointers
will be accessed. Of course, this issue doesn't exist on LS1028A, because
its num_tx_rings is 8, and bdr_int_num is either 1 or 2. However, there
is a risk for the upcoming i.MX95. Therefore, it is necessary to ensure
that each tx_bdr can be allocated to the corresponding memory.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract enetc_int_vector_init() and enetc_int_vector_destroy() from
enetc_alloc_msix() so that the code is more concise and readable.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The verdor ID and device ID of i.MX95 EMDIO are different from LS1028A
EMDIO, so add new vendor ID and device ID to pci_device_id table to
support i.MX95 EMDIO.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ERR050089 workaround causes performance degradation and potential
functional issues (e.g., RCU stalls) under certain workloads. Since
new SoCs like i.MX95 do not require this workaround, use a static key
to compile out enetc_lock_mdio() and enetc_unlock_mdio() at runtime,
improving performance and avoiding unnecessary logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Compile enetc_pf_common.c as a standalone module to allow shared usage
between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register
different hardware operation interfaces for both ENETC v1 and v4 PF
drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ENETC PF driver of LS1028A (rev 1.0) is incompatible with the version
used on the i.MX95 platform (rev 4.1), except for the station interface
(SI) part. To reduce code redundancy and prepare for a new driver for rev
4.1 and later, extract shared interfaces from enetc_pf.c and move them to
enetc_pf_common.c. This refactoring lays the groundwork for compiling
enetc_pf_common.c into a shared driver for both platforms' PF drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netc-blk-ctrl driver is used to configure Integrated Endpoint
Register Block (IERB) and Privileged Register Block (PRB) of NETC.
For i.MX platforms, it is also used to configure the NETCMIX block.
The IERB contains registers that are used for pre-boot initialization,
debug, and non-customer configuration. The PRB controls global reset
and global error handling for NETC. The NETCMIX block is mainly used
to set MII protocol and PCS protocol of the links, it also contains
settings for some other functions.
Note the IERB configuration registers can only be written after being
unlocked by PRB, otherwise, all write operations are inhibited. A warm
reset is performed when the IERB is unlocked, and it results in an FLR
to all NETC devices. Therefore, all NETC device drivers must be probed
or initialized after the warm reset is finished.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add bindings for NXP NETC blocks control. Usually, NETC has 2 blocks of
64KB registers, integrated endpoint register block (IERB) and privileged
register block (PRB). IERB is used for pre-boot initialization for all
NETC devices, such as ENETC, Timer, EMDIO and so on. And PRB controls
global reset and global error handling for NETC. Moreover, for the i.MX
platform, there is also a NETCMIX block for link configuration, such as
MII protocol, PCS protocol, etc.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ENETC of i.MX95 has been upgraded to revision 4.1, and the vendor
ID and device ID have also changed, so add the new compatible strings
for i.MX95 ENETC. In addition, i.MX95 supports configuration of RGMII
or RMII reference clock.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The EMDIO of i.MX95 has been upgraded to revision 4.1, and the vendor
ID and device ID have also changed, so add the new compatible strings
for i.MX95 EMDIO.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add SMU metrics table support for 1Ah family 60h model. This information
will be used by the PMF driver to alter the system thermals.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241023063245.1404420-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When remaining resources are being cleaned up on driver close,
outstanding VM mappings may result in resources being leaked, due
to an object reference loop, as shown below, with each object (or
set of objects) referencing the object below it:
PVR GEM Object
GPU scheduler "finished" fence
GPU scheduler “scheduled” fence
PVR driver “done” fence
PVR Context
PVR VM Context
PVR VM Mappings
PVR GEM Object
The reference that the PVR VM Context has on the VM mappings is a
soft one, in the sense that the freeing of outstanding VM mappings
is done as part of VM context destruction; no reference counts are
involved, as is the case for all the other references in the loop.
To break the reference loop during cleanup, free the outstanding
VM mappings before destroying the PVR Context associated with the
VM context.
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/8a25924f-1bb7-4d9a-a346-58e871dfb1d1@imgtec.com
This adds a linked list of VM contexts which is needed for the next patch
to be able to correctly track VM contexts for destruction on file close.
It is only safe for VM contexts to be removed from the list and destroyed
when not in interrupt context.
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/e57128ea-f0ce-4e93-a9d4-3f033a8b06fa@imgtec.com
Put in the dollar sign for the variable '$config'. That way, the debug
message has more meaning.
Signed-off-by: David Hunter <david.hunter.linux@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add the ability to cycle through dialog buttons with the TAB key.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The ->addWidget() method re-parents the widget. The parent QWidget can
be specified directly in the constructor.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rearrange the code to make the upcoming refactoring easier to understand.
No functional changes intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit fde192511b ("kconfig: remove tristate choice support"),
all choice blocks are now boolean. There is no longer a need to specify
the choice type explicitly.
All "bool" prompts in choice entries have been converted to "prompt".
This commit removes support for the "bool" syntax in choice entries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit fde192511b ("kconfig: remove tristate choice support"),
all choice blocks are now boolean. There is no longer a need to specify
the choice type explicitly.
Most choice blocks already use "prompt". Before the next commit removes
support for the "bool" syntax in choice entries, this commit converts
the remaining "bool" occurences under drivers/usb/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some architectures embed boot DTBs in vmlinux. A potential issue for
these architectures is a race condition during parallel builds because
Kbuild descends into arch/*/boot/dts/ twice.
One build thread is initiated by the 'dtbs' target, which is a
prerequisite of the 'all' target in the top-level Makefile:
ifdef CONFIG_OF_EARLY_FLATTREE
all: dtbs
endif
For architectures that support the built-in boot dtb, arch/*/boot/dts/
is visited also during the ordinary directory traversal in order to
build obj-y objects that wrap DTBs.
Since these build threads are unaware of each other, they can run
simultaneously during parallel builds.
This commit introduces a generic build rule to scripts/Makefile.vmlinux
to support embedded boot DTBs in a race-free way. Architectures that
want to use this rule need to select CONFIG_GENERIC_BUILTIN_DTB.
After the migration, Makefiles under arch/*/boot/dts/ will be visited
only once to build only *.dtb files.
This change also aims to unify the CONFIG options used for built-in DTBs
support. Currently, different architectures use different CONFIG options
for the same purposes.
With this commit, the CONFIG options will be unified as follows:
- CONFIG_GENERIC_BUILTIN_DTB
This enables the generic rule for built-in boot DTBs. This will be
renamed to CONFIG_BUILTIN_DTB after all architectures migrate to the
generic rule.
- CONFIG_BUILTIN_DTB_NAME
This specifies the path to the embedded DTB.
(relative to arch/*/boot/dts/)
- CONFIG_BUILTIN_DTB_ALL
If this is enabled, all DTB files compiled under arch/*/boot/dts/ are
embedded into vmlinux. Only used by MIPS.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 2f7ab1267d ("Kbuild: add Rust support"), Kconfig
generates include/generated/rustc_cfg, but its presence is not checked
in the top-level Makefile. It should be checked similarly to the C
header counterpart, include/generated/autoconf.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
