Due to a problem in the iTBT DP-in adapter's firmware the sink on a TBT
link may get disconnected inadvertently if the SINK_COUNT_ESI and the
DP_LINK_SERVICE_IRQ_VECTOR_ESI0 registers are read in a single AUX
transaction. Work around the issue by reading these registers in
separate transactions.
The issue affects MTL+ platforms and will be fixed in the DP-in adapter
firmware, however releasing that firmware fix may take some time and is
not guaranteed to be available for all systems. Based on this apply the
workaround on affected platforms.
See HSD #13013007775.
v2: Cc'ing Mika Westerberg.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13760
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14147
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250519133417.1469181-1-imre.deak@intel.com
(cherry picked from commit c3a48363cf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The PTL XELPDP_PORT_CLOCK_CTL register XELPDP_DDI_CLOCK_SELECT field's
size is 5 bits vs. the earlier platforms where its size is 4 bits. Make
sure the field is read-out/programmed everywhere correctly, according to
the above.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250512142600.824347-1-imre.deak@intel.com
(cherry picked from commit d0bf684bd4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Commit 1788cf6a91 ("tty: serial: switch from circ_buf to kfifo")
introduced an error in the TX DMA handling for 8250_omap.
When the OMAP_DMA_TX_KICK flag is set, the "skip_byte" is pulled from
the kfifo and emitted directly in order to start the DMA. While the
kfifo is updated, dma->tx_size is not decreased. This leads to
uart_xmit_advance() called in omap_8250_dma_tx_complete() advancing the
kfifo by one too much.
In practice, transmitting N bytes has been seen to result in the last
N-1 bytes being sent repeatedly.
This change fixes the problem by moving all of the dma setup after the
OMAP_DMA_TX_KICK handling and using kfifo_len() instead of the DMA size
for the 4-byte cutoff check. This slightly changes the behaviour at
buffer wraparound, but it still transmits the correct bytes somehow.
Now, the "skip_byte" would no longer be accounted to the stats. As
previously, dma->tx_size included also this skip byte, up->icount.tx was
updated by aforementioned uart_xmit_advance() in
omap_8250_dma_tx_complete(). Fix this by using the uart_fifo_out()
helper instead of bare kfifo_get().
Based on patch by Mans Rullgard <mans@mansr.com>
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 1788cf6a91 ("tty: serial: switch from circ_buf to kfifo")
Link: https://lore.kernel.org/all/20250506150748.3162-1-mans@mansr.com/
Reported-by: Mans Rullgard <mans@mansr.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250522053835.3495975-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When attempting to use an archive file, such as APEX on android,
as a file-backed mount source, it fails because EROFS image within
the archive file does not start at offset 0. As a result, a loop
or a dm device is still needed to attach the image file at an
appropriate offset first. Similarly, if an EROFS image within a
block device does not start at offset 0, it cannot be mounted
directly either.
To address this issue, this patch adds a new mount option `fsoffset=x'
to accept a start offset for the primary device. The offset should be
aligned to the block size. EROFS will add this offset before performing
read requests.
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250517090544.2687651-1-shengyong1@xiaomi.com
[ Gao Xiang: minor update on documentation and the error message. ]
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Tariq Toukan says:
====================
net/mlx5: HWS, set of fixes and adjustments
This patch series by Yevgeny and Vlad introduces a set of steering fixes
and adjustments.
====================
Link: https://patch.msgid.link/1747766802-958178-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Having adjacent accelerated modify header actions (so-called
pattern-argument actions) may result in inconsistent outcome.
These inconsistencies can take the form of writes to the same
field or a read coupled with a write to the same field. The
solution is to detect such dependencies and insert nops between
the offending actions.
The existing implementation had a few issues, which pretty much
required a complete rewrite of the code that handles these
dependencies.
In the new implementation we're doing the following:
* Checking any two adjacent actions for conflicts (not just
odd-even pairs).
* Marking 'set' and 'add' action fields as destination, rather
than source, for the purposes of checking for conflicts.
* Checking all types of actions ('add', 'set', 'copy') for
dependencies.
* Managing offsets of the args in the buffer - copy the action
args to the right place in the buffer.
* Checking that after inserting nops we're still within the number
of supported actions - return an error otherwise.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix typo - rename 'nope_locations' to 'nop_locations', which describes
the locations of 'nop' actions. To shorten the lines, this renaming
also required some refactoring.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hardware steering handles actions differently from firmware, but for
termination rules that use encapsulation the firmware needs to be aware
of the action.
Fix this by registering reformat actions with the firmware the first
time this is needed. To do this, add a third possible owner for an
action, and also a lock to protect against registration of the same
action from different threads.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The firmware reformat id is a u32 and can't safely be returned as an
int. Because the functions also need a way to signal error, prefer to
return the id as an output parameter and keep the return code only for
success/error.
While we're at it, also extract some duplicate code to fetch the
reformat id from a more generic struct pkt_reformat.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf_vport_splitq_napi_poll() can incorrectly return @budget
after napi_complete_done() has been called.
This violates NAPI rules, because after napi_complete_done(),
current thread lost napi ownership.
Move the test against POLL_MODE before the napi_complete_done().
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Reported-by: Peter Newman <peternewman@google.com>
Closes: https://lore.kernel.org/netdev/20250520121908.1805732-1-edumazet@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Link: https://patch.msgid.link/20250520124030.1983936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enic started using netif_get_num_default_rss_queues() to set the number
of RQs used in commit cc94d6c4d4 ("enic: Adjust used MSI-X
wq/rq/cq/interrupt resources in a more robust way")
This resulted in machines with less than 16 cpus using less than 8 RQs.
Allow enic to use at least 8 RQs no matter how many cpus are in the
machine to not impact existing enic workloads after a kernel upgrade.
Reviewed-by: John Daley <johndale@cisco.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521-enic_min_8rq-v1-1-691bd2353273@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is [1/3] part of hinic3 Ethernet driver initial submission.
With this patch hinic3 is a valid kernel module but non-functional
driver.
The driver parts contained in this patch:
Module initialization.
PCI driver registration but with empty id_table.
Auxiliary driver registration.
Net device_ops registration but open/stop are empty stubs.
tx/rx logic.
All major data structures of the driver are fully introduced with the
code that uses them but without their initialization code that requires
management interface with the hw.
Co-developed-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Co-developed-by: Gur Stavi <gur.stavi@huawei.com>
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/76a137ffdfe115c737c2c224f0c93b60ba53cc16.1747736586.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Logic here always sets hdr->version to 2 if it is not a BE3 or Lancer chip,
even if it is BE2. Use 'else if' to prevent multiple assignments, setting
version 0 for BE2, version 1 for BE3 and Lancer, and version 2 for others.
Fixes potential incorrect version setting when BE2_chip and
BE3_chip/lancer_chip checks could both be true.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250519141731.691136-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The list_first_entry() macro never returns NULL. If the list is
empty then it returns an invalid pointer. Use list_first_entry_or_null()
to check if the list is empty.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505080231.7OXwq4Te-lkp@intel.com/
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
I found that rename fails after cifs mount due to update of
lookup_one_qstr_excl().
mv a/c b/
mv: cannot move 'a/c' to 'b/c': No such file or directory
In order to rename to a new name regardless of whether the dentry is
negative, we need to get the dentry through lookup_one_qstr_excl().
So It will not return error if the name doesn't exist.
Fixes: 204a575e91 ("VFS: add common error checks to lookup_one_qstr_excl()")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Subsystem rstat locks are dynamically allocated per-cpu. It was discovered
that a panic can occur during this allocation when the lock size is zero.
This is the case on non-smp systems, since arch_spinlock_t is defined as an
empty struct. Prevent this allocation when !CONFIG_SMP by adding a
pre-processor conditional around the affected block.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Reported-by: Klara Modin <klarasmodin@gmail.com>
Fixes: 748922dcfa ("cgroup: use subsystem-specific rstat locks to avoid contention")
Signed-off-by: Tejun Heo <tj@kernel.org>
If a shorter than assumed transfer was seen, a partial buffer will have
been filled. For that case it isn't sane to attempt to fill more into
the bundle before posting a completion, as that will cause a gap in
the received data.
Check if the iterator has hit zero and only allow to continue a bundle
operation if that is the case.
Also ensure that for putting finished buffers, only the current transfer
is accounted. Otherwise too many buffers may be put for a short transfer.
Link: https://github.com/axboe/liburing/issues/1409
Cc: stable@vger.kernel.org
Fixes: 7c71a0af81 ("io_uring/net: improve recv bundles")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Define the gate clk for the OTG PHY on Rockchip RK3576 so the nvmem
driver actually works
- Initialize clk_hw_onecell_data::num before accessing the 'hws' array
to keep UBSAN happy
- Fix a perf degradation on the Allwinner D1 MMC clk that was making
things half bad
- Fix the Allwinner SNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro to have
proper order of arguments
-----BEGIN PGP SIGNATURE-----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=gq4m
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes for some SoC clk drivers:
- Define the gate clk for the OTG PHY on Rockchip RK3576 so the nvmem
driver actually works
- Initialize clk_hw_onecell_data::num before accessing the 'hws'
array to keep UBSAN happy
- Fix a perf degradation on the Allwinner D1 MMC clk that was making
things half bad
- Fix the Allwinner SNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro to have
proper order of arguments"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: d1: Add missing divider for MMC mod clocks
clk: s2mps11: initialise clk_hw_onecell_data::num before accessing ::hws[] in probe()
clk: sunxi-ng: fix order of arguments in clock macro
clk: rockchip: rk3576: define clk_otp_phy_g
- Convert to a 'fs_str' tracepoint that just emits as a string: this
lets us build up the tracepoint with a printbuf, using our pretty
printers, and they're much easier to manage
- Include locks_held, before and after
- Include the btree node pointer we failed on (error pointer, null, or
real node)
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a flag for tracking whether a directory has case-insensitive
descendents - so that overlayfs can disallow mounting, even though the
filesystem supports case insensitivity.
This is a new on disk format version, with a (cheap) upgrade to ensure
the flag is correctly set on existing inodes.
Create, rename and fssetxattr are all plumbed to ensure the new flag is
set, and we've got new fsck code that hooks into check_inode(0.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Move a fsck.c helper into inode.c, eliminate some duplicate and organize
the inode lookup helpers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a better helper for printing out paths of inodes when we don't know
the subvolume, for fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bi_casefold only makes sense for directories, and since it's one of the
variable length fields setting it unnecessarily wastes space.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's no reason to be running this inside our transaction; it forces
us to copy the key we're updating to a temporary, which we'd like to
skip.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It used to be that we had a fixed maximum number of btree paths to work
with - 64.
That's no longer the case, so bch2_extent_atomic_end() doesn't have to
be as strict.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Accounting has gotten quite heavy, and there's lots of redundancy in
accounting updates within a transaction, as we often add/delete multiple
extents that touch the same accountign counters.
This will reduce the amount of data that we journal, and reduce pressure
downstream on the btree write buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There can be a lot of rendundancy in accounting updates within a single
btree transaction.
Split out accounting updates so that they can be deduped, in the next
commit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Detect buckets with missing backpointers, and run repair on demand.
__bch2_move_data_phys() now calls
bch2_check_bucket_backpointer_mismatch() as it walks buckets, which
checks for missing backpointers by comparing backpointers against bucket
sector counts.
When missing backpointers are detected, we kick off
bch2_check_extents_to_backpointers() asynchronously - right away if
we're trying to evacuate, or with a threshold if we're just running
copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add some more helpers, and mismatches is now a superset of the empty
bitmap - simplifies most checks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we request a recovery pass to be run online, i.e. not during
recovery, if it's an online pass it'll now be run in the background,
instead of waiting for the next mount.
To avoid situations where recovery passes are running continuously, this
also includes ratelimiting: if the RUN_RECOVERY_PASS_ratelimit flag is
passed, the pass may be deferred until later - depending on the runtime
and last run stats in the recovery_passes superblock section.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Consolidate the run_explicit_recovery_pass() interfaces by adding a
flags parameter; this will also let us add a RUN_RECOVERY_PASS_ratelimit
flag.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Show recovery pass status in sysfs - important now that we're running
them automatically in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We want recovery.curr_pass to be private to the recovery passes code,
for better showing recovery pass status; also, it may rewind and is
generally not the correct member to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Consolidate bch2_run_recovery_passes() and
bch2_run_online_recovery_passes(), prep work for automatically
scheduling and running recovery passes in the background.
- Now takes a mask of which passes to run, automatic background repair
will pass in sb.recovery_passes_required.
- Skips passes that are failing: a pass that failed may be reattempted
after another pass succeeds (some passes depend on repair done by
other passes for successful completion).
- bch2_recovery_passes_match() helper to skip alloc passes on a
filesystem without alloc info.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
