[Why & How]
ODM seamless transitions require DIV_MODE_AUTO. However,
DIV_MODE_AUTO only works when all the horizontal timing params
are divisible by the ODM combine factor. Therefore, disable the
ODM 2:1 policy when the horizontal timing params are not divisible
by 2.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When user unplugs mst hubs, the current code will forcefully zero
entire mst payload allocation table structure stored in link before we
deallocate actual payload when disabling stream.
During the first disable stream sequence, we will use current mst
payload allocation table to determine if link should be turned off.
Because we zero out it before we are disabling stream, the payload
allocation table stored in link doesn't represent the actual allocation status,
so we turn off link at the first disable stream without waiting until all
streams' payloads have been deallocated. This avoilates the designed
deallocation sequence and caused system hang in DP2 scenario.
[how]
Remove payload during deallocation and never zero payload allocation structure
without actually deallocating payload.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Original change 594b237b9a ("drm/amd/display: Add
interface to track PHY state") was implemented by assuming stream's
dpms off is equivalent to PHY power off.
This assumption doesn't hold in following situations:
1. MST multiple stream scenario, where multiple streams are sharing the
same PHY output. Toggle dpms off for one of the stream doesn't power
off the PHY due to the presence of other streams.
2. enable stream failure scenario, where enable stream fails due to
failure of link training. This will cause DPMS off is set to false, while
the actual PHY power state is off in certain cases.
Due to the problematic assumption, the logic will skip disabling
other streams for MST multiple stream scenario, therefore PHY is
not actually powered off.
[how]
1. Rework this refactor by moving PHY state update down to hardware
level, where we update PHY state in place when hardware sequencer
is actually changing the power state of the PHY hardware.
2. Reimplement symclk on TX off workaround in place when we are actually
calling transmitter control to power off PHY in dcn32. Note the workaround is
added due to the lack of proper software interface to set TX while keeping
symclk on. We plan to address this interface problem so we can set TX off
only without affecting symclk in future dcn versions.
Fixes: 594b237b9a ("drm/amd/display: Add interface to track PHY state")
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch addes MES and MES-KIQ version in debugfs.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
LTTPRs can in very rare instsances fail to increment DPCD LTTPR count.
This results in aux-i LTTPR requests to be sent to the wrong DPCD
address, which causes link training failure.
[HOW]
Override internal repeater count if fixed_vs flag is set for a given link
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Correctly set ddr5 channel width to 8 bytes
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC makes use of layer_index (zpos) when picking the HW plane to enable
HW cursor on. However, some compositors will not attach zpos information
to each DRM plane. Consequently, in amdgpu, we default layer_index to 0
and do not update it.
This causes said DC logic to enable HW cursor on all planes of the same
layer_index, which manifests as a double cursor issue if one of the
planes is scaled (and hence scaling the cursor as well).
[How]
Use DRM core helpers to calculate a normalized_zpos value for each
drm_plane_state under each crtc, within the atomic state.
This helper will first consider existing zpos values, and if
identical/unset, fallback to plane ID ordering.
The normalized_zpos is then passed to dc_plane_info during atomic check
for later use by the cursor logic.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
- Only consider pixel rate div policy for DCN32+
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Added logs for panel delays, spread_spectrum_percentage,
and gpuclk_ss_percentage to facilitate debugging.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Support dramclk change latency change via debug option and add some
code isolation.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Pipe split prediction previously only took into
account MPC split. We must also consider when
ODM combine is required, and when we apply ODM
combine by policy.
- Also re-work DET allocation function as it wasn't
properly splitting the DET per stream, per plane.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
After reg offset initialization was switched to runtime rather than
compile time, some of the defintions are not needed anymore and can
be removed.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
420 modes are limited by FMT buffer width of 4096
which requires multi-pipe support in form of ODM
combine. If 420 modes have greater HActive than
4096, the DML logic should accomodate whether
it should be rejected, or ODM combine 2:1 or 4:1
is triggered accordingly.
[How]
FMT Buffer limit of 4096 in DCN32. Force ODM
combine depending on HActive and FMT Buffer limit.
Reject modes if TMDS 420 and above 4096.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up some inconsistent indentings
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2182
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up some inconsistent indentings
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2181
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up some inconsistent indentings
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2180
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up some inconsistent indentings
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2179
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up some inconsistent indentings
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2178
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up some inconsistent indentings
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2177
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a pr_debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_firmware_info debugfs will show rlcv/rlcp
ucode version info
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support query rlcp and rlcv firmware version from
existing AMDGPU_INFO_FW_VERSION interface
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To remove duplication for GFX11 as well, use the common MQD manager
functions defined in kfd_mqd_manager.c for all version of managers
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the PTE flags when translate further (TF) is
enabled:
- With translate_further enabled, invalid PTEs can be 0. Reading
consecutive invalid PTEs as 0 is considered a fault. To prevent
this, ensure invalid PTEs have at least 1 bit set.
- The current invalid PTE flags settings to translate a retry fault
into a no-retry fault, doesn't work with TF enabled. As a result,
update invalid PTE flags settings which works for both TF enabled
and disabled case.
Fixes: 352e683b72 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA update page table may be called from unlocked context, this
generate below warning. Use unlocked iterator to handle this case.
WARNING: CPU: 0 PID: 1475 at
drivers/dma-buf/dma-resv.c:483 dma_resv_iter_next
Call Trace:
dma_resv_iter_first+0x43/0xa0
amdgpu_vm_sdma_update+0x69/0x2d0 [amdgpu]
amdgpu_vm_ptes_update+0x29c/0x870 [amdgpu]
amdgpu_vm_update_range+0x2f6/0x6c0 [amdgpu]
svm_range_unmap_from_gpus+0x115/0x300 [amdgpu]
svm_range_cpu_invalidate_pagetables+0x510/0x5e0 [amdgpu]
__mmu_notifier_invalidate_range_start+0x1d3/0x230
unmap_vmas+0x140/0x150
unmap_region+0xa8/0x110
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use for_each_pci_dev() instead of open-coding it. No functional change.
Link: https://lore.kernel.org/r/20220916140329.679633-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Add test result message when test_task_storage_map_stress_lookup()
succeeds or is skipped. The test case can be skipped due to the choose
of preemption model in kernel config, so export skips in test_maps.c and
increase it when needed.
The following is the output of test_maps when the test case succeeds or
is skipped:
test_task_storage_map_stress_lookup:PASS
test_maps: OK, 0 SKIPPED
test_task_storage_map_stress_lookup SKIP (no CONFIG_PREEMPT)
test_maps: OK, 1 SKIPPED
Fixes: 73b97bc78b ("selftests/bpf: Test concurrent updates on bpf_task_storage_busy")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220919035714.2195144-1-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
On probe of the ASoC component, the device is reset but the regcache is
retained. This means the regcache gets out of sync if the codec is
rebound to a sound card for a second time. Fix it by reinitializing the
regcache to defaults after the device is reset.
Fixes: b0bcbe6157 ("ASoC: tas2770: Fix calling reset in probe")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On resuming, we anticipate that the jack is detected before playback
or capture. Therefore, we use semaphore to control the jack detection
done without any bothering. During booting, the driver launches jack
detection and releases the semaphore. However, it doesn't perceive the
maniputation of semaphore is not like resuming procedure. This makes
the semaphore's count value become to 2. There is more than one thread
can enter into the critical section. This may get unexpected situation
and make some chaos.
Signed-off-by: SJLIN0 <SJLIN0@nuvoton.com>
Signed-off-by: Wallace Lin <savagecin@gmail.com>
Link: https://lore.kernel.org/r/20220915012800.825196-1-SJLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
syzbot is reporting NULL pointer dereference at hci_uart_tty_close() [1],
for rcu_sync_enter() is called without rcu_sync_init() due to
hci_uart_tty_open() ignoring percpu_init_rwsem() failure.
While we are at it, fix that hci_uart_register_device() ignores
percpu_init_rwsem() failure and hci_uart_unregister_device() does not
call percpu_free_rwsem().
Link: https://syzkaller.appspot.com/bug?extid=576dfca25381fb6fbc5f [1]
Reported-by: syzbot <syzbot+576dfca25381fb6fbc5f@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 67d2f8781b ("Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.")
Fixes: d73e172816 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq
WQ into hdev->workqueue WQ which is under draining operation [1], for
commit c8efcc2589 ("workqueue: allow chained queueing during
destruction") does not allow such operation.
The check introduced by commit 877afadad2 ("Bluetooth: When HCI work
queue is drained, only queue chained work") was incomplete.
Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because
hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect
the queuing operation with RCU read lock in order to avoid calling
queue_delayed_work() after cancel_delayed_work() completed.
Link: https://syzkaller.appspot.com/bug?extid=243b7d89777f90f7613b [1]
Reported-by: syzbot <syzbot+243b7d89777f90f7613b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 877afadad2 ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Inside set_at_max_writeback_rate() the calculation in following if()
check is wrong,
if (atomic_inc_return(&c->idle_counter) <
atomic_read(&c->attached_dev_nr) * 6)
Because each attached backing device has its own writeback thread
running and increasing c->idle_counter, the counter increates much
faster than expected. The correct calculation should be,
(counter / dev_nr) < dev_nr * 6
which equals to,
counter < dev_nr * dev_nr * 6
This patch fixes the above mistake with correct calculation, and helper
routine idle_counter_exceeded() is added to make code be more clear.
Reported-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Link: https://lore.kernel.org/r/20220919161647.81238-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a cleanup for commit 1616a4c2ab ("bcache: remove bcache device
self-defined readahead")', currently no user for
bch_mark_cache_readahead() since that commit.
Signed-off-by: Lin Feng <linf@wangsu.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220919161647.81238-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All pending works will be drained by destroy_workqueue(), no need to call
flush_workqueue() explicitly.
Signed-off-by: Li Lei <lilei@szsandstone.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220919161647.81238-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some Intel-based platforms rely on a topology file that hard-codes the
use of MCLK0. This is incorrect in 10% of the cases. Rather than
generating yet another set of topology files, this patch adds a kernel
module parameter to override the topology value.
In hindsight, we should never have allowed mclks to be specified in
topology, this is a hardware-level information that should not have
been visible in the topology.
Future patches will try to set this value automagically, e.g. by
parsing the NHLT content.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SSP count is incorrect for TGL and MTL devices, the SSP count is
limited to 3 (I2SPC parameter in the Integration HAS).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver wants to know the bit rate on the serial bus and takes that
to be the value set by 'set_sysclk'. The 'set_bclk_ratio' op is a better
fit for figuring out the clocking parameters of the serial bus, so
implement that and give it precedence over the prior methods.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-11-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L83 part is a headphone jack codec found in recent Apple
machines. It is a publicly undocumented part but as far as can be told
it is identical to CS42L42 except for two points:
* The chip ID is different.
* Of those registers for which we have a default value in the existing
CS42L42 kernel driver, one register (MCLK_CTL) differs in its reset
value on CS42L83.
To address those two points (and only those), add to the CS42L42 driver
a separate CS42L83 front.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-10-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Export the regmap callbacks for indicating readable/volatile registers,
also the range structure, to the CS42L42 core namespace. This is in
advance of reusing these bits in a CS42L83 driver frontend.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-9-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Split the I2C bus driver definition and probe()/remove() into a
separate module so that a SoundWire build of CS42L42 support does
not have a spurious dependency on I2C.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-8-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass pointers to snd_soc_component_driver and snd_soc_dai_driver
objects into cs42l42_common_probe().
This is in preparation for adding SoundWire support.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-7-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SoundWire the system resume cannot restore registers until the
host controller has re-enumerated the peripheral.
This patch splits cs42l42_resume() into two functions, one to
power up and the other to restore registers, ready for adding
SoundWire support.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-6-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To prepare for adding SoundWire the probe must be split into three
parts:
1) The bus-specific probe
2) Common bus-agnostic probe steps
3) Initialization of the peripheral registers
Step (3) must be separate because on SoundWire devices the probe must
enable power supplies and release reset so that the peripheral can be
enumerated by the bus, but it isn't possible to access registers until
enumeration has completed.
The call to devm_snd_soc_register_component() must be done at stage (2)
so that it can EPROBE_DEFER if necessary. In SoundWire systems stage (3)
is not a probe event so a deferral at this stage would not result in
re-probing dependencies.
A new init_done flag indicates that the chip has been identified and
initialized. This is used to prevent cs42l42_remove(), cs42l42_suspend(),
cs42l42_restore() and cs42l42_irq_thread() from attempting register
accesses if the chip was not successfully initialized. Although this
cannot happen on I2C, because the entire probe would fail, it is
possible on SoundWire if probe succeeds but the cs42l42 is never
enumerated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for splitting cs42l42_i2c_probe() into multiple functions
replace use of &i2c_client->dev with cs42l42->dev. This reduces diff
clutter in the patch that splits the function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>