If we are at the end of suspend or very early in resume
its possible an async fence signal (via rcu_call) is triggered
to free_engines which could lead us to the execution of
the context destruction worker (after a prior worker flush).
Thus, when suspending, insert rcu_barriers at the start
of i915_gem_suspend (part of driver's suspend prepare) and
again in i915_gem_suspend_late so that all such cases have
completed and context destruction list isn't missing anything.
In destroyed_worker_func, close the race against CT-loss
by checking that CT is enabled before calling into
deregister_destroyed_contexts.
Based on testing, guc_lrc_desc_unpin may still race and fail
as we traverse the GuC's context-destroy list because the
CT could be disabled right before calling GuC's CT send function.
We've witnessed this race condition once every ~6000-8000
suspend-resume cycles while ensuring workloads that render
something onscreen is continuously started just before
we suspend (and the workload is small enough to complete
and trigger the queued engine/context free-up either very
late in suspend or very early in resume).
In such a case, we need to unroll the entire process because
guc-lrc-unpin takes a gt wakeref which only gets released in
the G2H IRQ reply that never comes through in this corner
case. Without the unroll, the taken wakeref is leaked and will
cascade into a kernel hang later at the tail end of suspend in
this function:
intel_wakeref_wait_for_idle(>->wakeref)
(called by) - intel_gt_pm_wait_for_idle
(called by) - wait_for_suspend
Thus, do an unroll in guc_lrc_desc_unpin and deregister_destroyed_-
contexts if guc_lrc_desc_unpin fails due to CT send falure.
When unrolling, keep the context in the GuC's destroy-list so
it can get picked up on the next destroy worker invocation
(if suspend aborted) or get fully purged as part of a GuC
sanitization (end of suspend) or a reset flow.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Tested-by: Mousumi Jana <mousumi.jana@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229215143.581619-1-alan.previn.teres.alexis@intel.com
When suspending, flush the context-guc-id
deregistration worker at the final stages of
intel_gt_suspend_late when we finally call gt_sanitize
that eventually leads down to __uc_sanitize so that
the deregistration worker doesn't fire off later as
we reset the GuC microcontroller.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Mousumi Jana <mousumi.jana@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228045558.536585-2-alan.previn.teres.alexis@intel.com
RPi 4 uses V3D 4.2, which is currently not supported by the register
definition stated at `v3d_core_reg_defs`. We should be able to support
V3D 4.2, therefore, change the maximum version of the register
definition to 42, not 41.
Fixes: 0ad5bc1ce4 ("drm/v3d: fix up register addresses for V3D 7.x")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109113126.929446-1-mcanal@igalia.com
To have better compatibility for DP sink, there is a retry mechanism
for the link training process to switch between different training process.
The original driver code doesn't reset the retry counter when training
state is pass. If the system triggers link training over 3 times,
there will be a chance to causes the driver to use the wrong training
method and return a training fail result.
To Fix this, we reset the retry counter when training state is pass
each time.
Signed-off-by: Allen Chen <allen.chen@ite.corp-partner.google.com>
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231221093057.7073-1-xiazhengqiao@huaqin.corp-partner.google.com
The pointer points to IO memory, but the __iomem annotation was
incorrectly placed. Annotate it correctly, update its usage accordingly
and fix the corresponding sparse error.
Fixes: d8b52a02cb ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-5-thomas.hellstrom@linux.intel.com
There are a couple of pointers pointing to MMIO space. Annotate them
with __iomem and fix the corresponding sparse warnings.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: 3b0d4a5579 ("drm/xe: Move register MMIO into xe_tile")
Fixes: 399a13323f ("drm/xe: add 28-bit address support in struct xe_reg")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Koby Elbaz <kelbaz@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-4-thomas.hellstrom@linux.intel.com
The pointer points to IO memory, but the __iomem annotation was
incorrectly placed. Annotate it correctly, update its usage accordingly
and fix the corresponding sparse error.
Fixes: 0887a2e7ab ("drm/xe: Make xe_mem_region struct")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-3-thomas.hellstrom@linux.intel.com
If the location of the kernel sources contains the string that we're
filtering for using DT_SCHEMA_FILES, then all schemas will currently be
matched, returned and checked, not just the ones we actually expected.
As an example, if the kernel sources happen to be below a directory
'google', and DT_SCHEMA_FILES=google, everything is checked. More
common examples might be having the sources below people's home
directories that contain the string st or arm and then searching for
those. The list is endless.
Fix this by only matching for schemas below the kernel source's
bindings directory.
Note that I opted for the implementation here so as to not having to
deal with escaping DT_SCHEMA_FILES, which would have been the
alternative if the grep match itself had been updated.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20231220145537.2163811-1-andre.draszik@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
property.c:1220 : Fixed excess struct member definition warning
property.c:444 : Fixed missing a blank line after declarations
Signed-off-by: Muzammil Ashraf <m.muzzammilashraf@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231219062317.17650-1-muzammil@dreambigsemi.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the devicetree bindings for the IBM Virtual Trusted Platform
Module to DT schema. Drop properties which are already documented in
tpm-common.yaml.
Document the "IBM,vtpm20" compatible string introduced by commit
18b3670d79 ("tpm: ibmvtpm: Add support for TPM2").
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/5c41e045dfe7cc3f27dd41c08c62ed8c4a90d8a4.1702806810.git.lukas@wunner.de
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the devicetree bindings for the Google Security Chip H1 running
Cr50 firmware to DT schema.
The chip can be attached to SPI or I²C. Existing devicetrees use the
same "google,cr50" compatible string for both cases without additionally
specifying a generic "tcg,tpm_tis-spi" or "tcg,tpm-tis-i2c" compatible.
The chip therefore cannot be documented in the tcg,tpm_tis-spi.yaml and
tcg,tpm-tis-i2c.yaml schemas: The validator would select both of them
and complain about SPI properties when the chip is an I²C peripheral.
So document the chip in a schema of its own which includes both, SPI and
I²C properties by reference.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/52635205818ab201cacb0c0f37c7fa48149c7f8e.1702806810.git.lukas@wunner.de
Signed-off-by: Rob Herring <robh@kernel.org>
A significant number of Trusted Platform Modules conform to the "TIS"
specification published by the Trusted Computing Group ("TCG PC Client
Specific TPM Interface Specification"). These chips typically use an
SPI, I²C or LPC bus as transport (via MMIO in the latter case). Some
of them even support multiple of those buses (selectable through a
config strap) or the same chip is available in multiple SKUs, each with
a different bus interface.
The devicetree bindings for these TPMs have not been converted to DT
schema yet and are spread out across 3 generic files and 2 chip-specific
files. A few TPM compatible strings were added to trivial-devices.yaml
even though additional properties are documented in the plaintext
bindings.
Consolidate the devicetree bindings into 3 yaml files, one per bus.
Move common properties to a separate tpm-common.yaml.
Document compatible strings which are supported by the TPM TIS driver
but were neglected to be added to the devicetree bindings.
Document the memory-region property recently introduced by commit
1e2714bb83 ("tpm: Add reserved memory event log").
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/953fd4c7519030db88e5b5e12ab6307414ebdd21.1702806810.git.lukas@wunner.de
Signed-off-by: Rob Herring <robh@kernel.org>
The integration for this SoC is different from the currently existing: It
needs it's PHY's reference clock rate to calculate the DDC bus frequency
correctly. The controller is also part of a powerdomain, so this gets added
as an mandatory property for this variant.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231222174220.55249-2-knaerzche@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Remote ETM(Embedded Trace Macrocell) is to capture information of
the executed processor instructions of remote processors like modem.
Add new coresight-remote-etm.yaml file describing the bindings
required to define coresight remote etm in the device trees.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-2-quic_jinlmao@quicinc.com
Signed-off-by: Rob Herring <robh@kernel.org>
The iommus and iommu-names property schemas have several issues. First,
'iommus-names' in the if/then schemas is the wrong name. As all the names
are the same, they can be defined at the top level instead. Then the
if/then schemas just need to define how many entries. The iommus if/then
schemas are also redundant. Best I can tell, the desire was to require 2
entries for "samsung,exynos5433-mfc", "samsung,mfc-v5", "samsung,mfc-v6",
and "samsung,mfc-v8".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Link: https://lore.kernel.org/r/20231214195553.862920-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The allocation request for swiotlb contiguous memory greater than
128*2KB cannot be fulfilled because it exceeds the maximum contiguous
memory limit. If the swiotlb memory we allocate is larger than 128*2KB,
swiotlb_find_slots() will still schedule the allocation of a new memory
pool, which will increase memory overhead.
Fix it by adding a check with alloc_size no more than 128*2KB before
scheduling the allocation of a new memory pool in swiotlb_find_slots().
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Protect entire IRQ handler by CT being enabled rather than just G2H
handler.
v2: Return on not enabled in CT irq handler (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
The intent is to return -EWOULDBLOCK to the user if a long running exec
queue is full during the exec IOCTL. -EWOULDBLOCK aliases to -EAGAIN
which results in the exec IOCTL doing a retry loop. Fix this by ensuring
the retry loop is broken when returning -EWOULDBLOCK.
Fixes: 8ae8a2e8dd ("drm/xe: Long running job update")
Reported-by: Sai Gowtham Ch <sai.gowtham.ch@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Looks possible to switch from CPU binding to GPU binding mid exec, and
if that happens for the same dma-resv we might use two fence slots, once
for the dummy fence, and another for the actual GPU bind.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/698
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We currently assume that we can upfront know exactly how many fence
slots we will need at the start of the exec, however the TTM bo_validate
can itself consume numerous fence slots, and due to how the
dma_resv_reserve_fences() works it only ensures that at least that many
fence slots are available. With this it is quite possible that TTM
steals some of the fence slots and then when it comes time to do the vma
binding and final exec stage we are lacking enough fence slots, leading
to some nasty BUG_ON(). A simple fix is to reserve our own fences later,
after the validate stage.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/698
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
ACPICA commit c5d2010744b1bf7efba0bd04a8a9c200ef8fb610
Add new flags and related fields to the MADT GICC/GICR/ITS
structures according to the code first ECR:
https://bugzilla.tianocore.org/show_bug.cgi?id=4557
Update the MADT template to the latest MADT revision.
Link: c5d20107
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 16f0befdeddf25756f317907798192bbaa417e5e
Implement code to handle the GICC online capable bit management
added into ACPI v6.5.
Link: 16f0befd
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like the ASUS ExpertBook B1502CBA and various ASUS laptops, the
ASUS ExpertBook B1502CGA has an ACPI DSDT table that describes IRQ 1 as
ActiveLow while the kernel overrides it to Edge_High.
$ sudo dmesg | grep DMI
[ 0.000000] DMI: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B1502CGA_B1502CGA/B1502CGA, BIOS B1502CGA.303 06/05/2023
$ grep -A 40 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Signed-off-by: Michael Maltsev <mekosko@projectyo.network>
[ rjw: rebase, replace .ident field with a comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
GCC 13.2.0 reported the warning of the print format specifier:
conf.c: In function ‘sysfs_get’:
conf.c:181:72: warning: format ‘%s’ expects argument of type ‘char *’, \
but argument 3 has type ‘int’ [-Wformat=]
181 | ksft_exit_fail_msg("sysfs: unable to read value '%s': %s\n",
| ~^
| |
| char *
| %d
The fix passes strerror(errno) as it was intended, like in the sibling error
exit message.
Fixes: aba51cd094 ("selftests: alsa - add PCM test")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-5-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC 13.2.0 compiler issued the following warning:
mixer-test.c:350:80: warning: format ‘%ld’ expects argument of type ‘long int’, \
but argument 5 has type ‘unsigned int’ [-Wformat=]
350 | ksft_print_msg("%s.%d value %ld more than item count %ld\n",
| ~~^
| |
| long int
| %d
351 | ctl->name, index, int_val,
352 | snd_ctl_elem_info_get_items(ctl->info));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
Fixing the format specifier in call to ksft_print_msg() according to the
compiler suggestion silences the warning.
Fixes: 10f2f19466 ("kselftest: alsa: Validate values read from enumerations")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-4-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GCC 13.2.0 compiler issued the following warning:
mixer-test.c: In function ‘ctl_value_index_valid’:
mixer-test.c:322:79: warning: format ‘%lld’ expects argument of type ‘long long int’, \
but argument 5 has type ‘long int’ [-Wformat=]
322 | ksft_print_msg("%s.%d value %lld more than maximum %lld\n",
| ~~~^
| |
| long long int
| %ld
323 | ctl->name, index, int64_val,
324 | snd_ctl_elem_info_get_max(ctl->info));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long int
Fixing the format specifier as advised by the compiler suggestion removes the
warning.
Fixes: 3f48b137d8 ("kselftest: alsa: Factor out check that values meet constraints")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-3-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Minor fix in the number of arguments to error reporting function in the
test program as reported by GCC 13.2.0 warning.
mixer-test.c: In function ‘find_controls’:
mixer-test.c:169:44: warning: too many arguments for format [-Wformat-extra-args]
169 | ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The number of arguments in call to ksft_exit_fail_msg() doesn't correspond
to the format specifiers, so this is adjusted resembling the sibling calls
to the error function.
Fixes: b1446bda56 ("kselftest: alsa: Check for event generation when we write to controls")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-2-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Asus Vivobook E1504GA and E1504GAB notebooks are affected by bug #216158
(DSDT specifies the kbd IRQ as level active-low and using the override
changes this to rising edge, stopping the keyboard from working).
Users of these notebooks do not have a working keyboard unless they add
their DMI information to the struct irq1_level_low_skip_override array
and compile a custom kernel.
Add support for these computers to the Linux kernel without requiring
the end-user to recompile the kernel.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216158
Signed-off-by: Ben Mayo <benny1091@gmail.com>
[ rjw: Link tag, subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the driver core can properly handle constant struct bus_type,
move the pnp_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use 2-factor multiplication argument form kcalloc() instead
of kzalloc().
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a new register used to configure selective update area size
for early transport.
Configure PIPE_SRCSZ_ERLY_TPT using calculated selective update area
carried in crtc_state->su_area.
Bspec: 68927
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-6-jouni.hogander@intel.com
New register CUR_POS_ERLY_TPT related to early transport is
supposed to be configured when early transport is in use.
This register is used to configure cursor vertical postion
from beginning of selective update area.
Bspec: 68927
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-5-jouni.hogander@intel.com
In __cachefiles_prepare_write(), the start and pos variables were made
unsigned 64-bit so that the casts in the checking could be got rid of -
which should be fine since absolute file offsets can't be negative, except
that an error code may be obtained from vfs_llseek(), which *would* be
negative. This breaks the error check.
Fix this for now by reverting pos and start to be signed and putting back
the casts. Unfortunately, the error value checks cannot be replaced with
IS_ERR_VALUE() as long might be 32-bits.
Fixes: 7097c96411 ("cachefiles: Fix __cachefiles_prepare_write()")
Reported-by: Simon Horman <horms@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401071152.DbKqMQMu-lkp@intel.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
cc: Yiqun Leng <yqleng@linux.alibaba.com>
cc: Jia Zhu <zhujia.zj@bytedance.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
This patch, preparatory for future developments, move the hardwired
parameters to configuration data to allow the addition of new
NT35510-based panels.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108201618.2798649-8-dario.binacchi@amarulasolutions.com