[ Upstream commit 932424a925 ]
This reverts commit 1a314099b7.
The C6x carveouts are reversed intentionally. This is due to the
requirement to keep the DMA memory region as non-cached, however the
minimum granular cache region for C6x is 16MB. So, C66x_0 marks the
entire C66x_1 16MB memory carveouts as non-cached, and uses the DMA
memory region of C66x_1 as its own, and vice-versa.
This was also called out in the original commit which introduced these
reversed carveouts:
"The minimum granularity on the Cache settings on C66x DSP
cores is 16MB, so the DMA memory regions are chosen such that
they are in separate 16MB regions for each DSP, while reserving
a total of 16 MB for each DSP and not changing the overall DSP
remoteproc carveouts."
Fixes: 1a314099b7 ("arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x carveout locations")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20250908142826.1828676-23-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a1778c78 ]
This reverts commit 9f3814a7c0.
The C6x carveouts are reversed intentionally. This is due to the
requirement to keep the DMA memory region as non-cached, however the
minimum granular cache region for C6x is 16MB. So, C66x_0 marks the
entire C66x_1 16MB memory carveouts as non-cached, and uses the DMA
memory region of C66x_1 as its own, and vice-versa.
This was also called out in the original commit which introduced these
reversed carveouts:
"The minimum granularity on the Cache settings on C66x DSP cores
is 16MB, so the DMA memory regions are chosen such that they are
in separate 16MB regions for each DSP, while reserving a total
of 16 MB for each DSP and not changing the overall DSP
remoteproc carveouts."
Fixes: 9f3814a7c0 ("arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20250908142826.1828676-22-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aee0678597 ]
Currently, the reserved memory carveouts used by remote processors are
named like 'rproc-name-<dma>-memory-region@addr'. While it is
descriptive, the node label already serves that purpose. Rename reserved
memory nodes to generic 'memory@addr' to align with the device tree
specifications. This is done for all TI K3 based boards.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250908142826.1828676-14-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Stable-dep-of: 79a1778c78 ("Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00c8fdc280 ]
The J742S2 SoC reuses the common k3-j784s4-j742s2-mcu-wakeup-common.dtsi
for its MCU domain, but it does not override the firmware-name property
for its R5F cores. This causes the wrong firmware binaries to be
referenced.
Introduce a new k3-j742s2-mcu-wakeup.dtsi file to override the
firmware-name property with correct names for J742s2.
Fixes: 38fd90a3e1 ("arm64: dts: ti: Introduce J742S2 SoC family")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20250823163111.2237199-1-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 843367c7ed ]
The RK3576 EVB1 has a RTL8211F PHY for each GMAC interface with
a dedicated reset line and the 25MHz clock provided by the SoC.
The current description results in non-working Ethernet as the
clocks are only enabled by the PHY driver, but probing the right
PHY driver currently requires that the PHY ID register can be read
for automatic identification.
This fixes up the network description to get the network functionality
working reliably and cleans up usage of deprecated DT properties while
at it.
Fixes: f135a1a073 ("arm64: dts: rockchip: Add rk3576 evb1 board")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250910-rk3576-evb-network-v1-1-68ed4df272a2@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebf8183ad0 ]
Add device tree nodes to enable the onboard Ampak AP6275P WiFi chip
connected over a PCIe link on Rockchip RK3576 EVB1.
It takes an external 32 kHz clock from the RTC chip and requires the
WIFI_REG_ON signal to be enabled before the bus is enumerated to
initialize properly.
Tested-by: Pavel Zhovner <pavel@flipperdevices.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250813-evb1-rtcwifibt-v1-2-d13c83422971@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Stable-dep-of: 843367c7ed ("arm64: dts: rockchip: Fix network on rk3576 evb1 board")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dc3f973b2 ]
The external Ethernet PHY has a reset pin that is connected to the SoC.
It is missing from the original submission.
Add it to complete the description.
Fixes: c6800f1599 ("arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250908181059.1785605-9-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a15f095b59 ]
The external Ethernet PHY has a reset pin that is connected to the SoC.
It is missing from the original submission.
Add it to complete the description.
Fixes: acca163f3f ("arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250908181059.1785605-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b86433721f ]
Allocate and free sched_tags while queue is freezed can deadlock[1],
this is a long term problem, hence allocate memory before freezing
queue and free memory after queue is unfreezed.
[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Fixes: e3a2b3f931 ("blk-mq: allow changing of queue depth through sysfs")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6293e336f6 ]
This helper only support to allocate the default number of requests,
add a new parameter to support specific number of requests.
Prepare to fix potential deadlock in the case nr_requests grow.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b86433721f ("blk-mq: fix potential deadlock while nr_requests grown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e632004044 ]
No functional changes are intended, make code cleaner and prepare to fix
the grow case in following patches.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b86433721f ("blk-mq: fix potential deadlock while nr_requests grown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f2799c546 ]
For shared tags case, all hctx->sched_tags/tags are the same, it doesn't
make sense to call into blk_mq_tag_update_depth() multiple times for the
same tags.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b86433721f ("blk-mq: fix potential deadlock while nr_requests grown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 626ff4f8eb ]
request_queue->nr_requests can be changed by:
a) switch elevator by updating nr_hw_queues
b) switch elevator by elevator sysfs attribute
c) configue queue sysfs attribute nr_requests
Current lock order is:
1) update_nr_hwq_lock, case a,b
2) freeze_queue
3) elevator_lock, case a,b,c
And update nr_requests is seriablized by elevator_lock() already,
however, in the case c, we'll have to allocate new sched_tags if
nr_requests grow, and do this with elevator_lock held and queue
freezed has the risk of deadlock.
Hence use update_nr_hwq_lock instead, make it possible to allocate
memory if tags grow, meanwhile also prevent nr_requests to be changed
concurrently.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b86433721f ("blk-mq: fix potential deadlock while nr_requests grown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b46d4c447d ]
queue_requests_store() is the only caller of
blk_mq_update_nr_requests(), and blk_mq_update_nr_requests() is the
only caller of blk_mq_tag_update_depth(), however, they all have
checkings for nr_requests input by user.
Make code cleaner by moving all the checkings to the top function:
1) nr_requests > reserved tags;
2) if there is elevator, 4 <= nr_requests <= 2048;
3) if elevator is none, 4 <= nr_requests <= tag_set->queue_depth;
Meanwhile, case 2 is the only case tags can grow and -ENOMEM might be
returned.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b86433721f ("blk-mq: fix potential deadlock while nr_requests grown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bd7195fea ]
1) queue_requests_store() is the only caller of
blk_mq_update_nr_requests(), where queue is already freezed, no need to
check mq_freeze_depth;
2) q->tag_set must be set for request based device, and queue_is_mq() is
already checked in blk_mq_queue_attr_visible(), no need to check
q->tag_set.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b86433721f ("blk-mq: fix potential deadlock while nr_requests grown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2f5974079 ]
Currently, split bio will be chained to original bio, and original bio
will be resubmitted to the tail of current->bio_list, waiting for
split bio to be issued. However, if split bio get split again, the IO
order will be messed up. This problem, on the one hand, will cause
performance degradation, especially for mdraid with large IO size; on
the other hand, will cause write errors for zoned block devices[1].
For example, in raid456 IO will first be split by max_sector from
md_submit_bio(), and then later be split again by chunksize for internal
handling:
For example, assume max_sectors is 1M, and chunksize is 512k
1) issue a 2M IO:
bio issuing: 0+2M
current->bio_list: NULL
2) md_submit_bio() split by max_sector:
bio issuing: 0+1M
current->bio_list: 1M+1M
3) chunk_aligned_read() split by chunksize:
bio issuing: 0+512k
current->bio_list: 1M+1M -> 512k+512k
4) after first bio issued, __submit_bio_noacct() will contuine issuing
next bio:
bio issuing: 1M+1M
current->bio_list: 512k+512k
bio issued: 0+512k
5) chunk_aligned_read() split by chunksize:
bio issuing: 1M+512k
current->bio_list: 512k+512k -> 1536k+512k
bio issued: 0+512k
6) no split afterwards, finally the issue order is:
0+512k -> 1M+512k -> 512k+512k -> 1536k+512k
This behaviour will cause large IO read on raid456 endup to be small
discontinuous IO in underlying disks. Fix this problem by placing split
bio to the head of current->bio_list.
Test script: test on 8 disk raid5 with 64k chunksize
dd if=/dev/md0 of=/dev/null bs=4480k iflag=direct
Test results:
Before this patch
1) iostat results:
Device r/s rMB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util
md0 52430.00 3276.87 0.00 0.00 0.62 64.00 32.60 80.10
sd* 4487.00 409.00 2054.00 31.40 0.82 93.34 3.68 71.20
2) blktrace G stage:
8,0 0 486445 11.357392936 843 G R 14071424 + 128 [dd]
8,0 0 486451 11.357466360 843 G R 14071168 + 128 [dd]
8,0 0 486454 11.357515868 843 G R 14071296 + 128 [dd]
8,0 0 486468 11.357968099 843 G R 14072192 + 128 [dd]
8,0 0 486474 11.358031320 843 G R 14071936 + 128 [dd]
8,0 0 486480 11.358096298 843 G R 14071552 + 128 [dd]
8,0 0 486490 11.358303858 843 G R 14071808 + 128 [dd]
3) io seek for sdx:
Noted io seek is the result from blktrace D stage, statistic of:
ABS((offset of next IO) - (offset + len of previous IO))
Read|Write seek
cnt 55175, zero cnt 25079
>=(KB) .. <(KB) : count ratio |distribution |
0 .. 1 : 25079 45.5% |########################################|
1 .. 2 : 0 0.0% | |
2 .. 4 : 0 0.0% | |
4 .. 8 : 0 0.0% | |
8 .. 16 : 0 0.0% | |
16 .. 32 : 0 0.0% | |
32 .. 64 : 12540 22.7% |##################### |
64 .. 128 : 2508 4.5% |##### |
128 .. 256 : 0 0.0% | |
256 .. 512 : 10032 18.2% |################# |
512 .. 1024 : 5016 9.1% |######### |
After this patch:
1) iostat results:
Device r/s rMB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util
md0 87965.00 5271.88 0.00 0.00 0.16 61.37 14.03 90.60
sd* 6020.00 658.44 5117.00 45.95 0.44 112.00 2.68 86.50
2) blktrace G stage:
8,0 0 206296 5.354894072 664 G R 7156992 + 128 [dd]
8,0 0 206305 5.355018179 664 G R 7157248 + 128 [dd]
8,0 0 206316 5.355204438 664 G R 7157504 + 128 [dd]
8,0 0 206319 5.355241048 664 G R 7157760 + 128 [dd]
8,0 0 206333 5.355500923 664 G R 7158016 + 128 [dd]
8,0 0 206344 5.355837806 664 G R 7158272 + 128 [dd]
8,0 0 206353 5.355960395 664 G R 7158528 + 128 [dd]
8,0 0 206357 5.356020772 664 G R 7158784 + 128 [dd]
3) io seek for sdx
Read|Write seek
cnt 28644, zero cnt 21483
>=(KB) .. <(KB) : count ratio |distribution |
0 .. 1 : 21483 75.0% |########################################|
1 .. 2 : 0 0.0% | |
2 .. 4 : 0 0.0% | |
4 .. 8 : 0 0.0% | |
8 .. 16 : 0 0.0% | |
16 .. 32 : 0 0.0% | |
32 .. 64 : 7161 25.0% |############## |
BTW, this looks like a long term problem from day one, and large
sequential IO read is pretty common case like video playing.
And even with this patch, in this test case IO is merged to at most 128k
is due to block layer plug limit BLK_PLUG_FLUSH_SIZE, increase such
limit can get even better performance. However, we'll figure out how to do
this properly later.
[1] https://lore.kernel.org/all/e40b076d-583d-406b-b223-005910a9f46f@acm.org/
Fixes: d89d87965d ("When stacked block devices are in-use (e.g. md or dm), the recursive calls")
Reported-by: Tie Ren <tieren@fnnas.com>
Closes: https://lore.kernel.org/all/7dro5o7u5t64d6bgiansesjavxcuvkq5p2pok7dtwkav7b7ape@3isfr44b6352/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b64682e78 ]
Lots of checks are already done while submitting this bio the first
time, and there is no need to check them again when this bio is
resubmitted after split.
Hence open code should_fail_bio() and blk_throtl_bio() that are still
necessary from submit_bio_split_bioset().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b2f5974079 ("block: fix ordering of recursive split IO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e37b5596a1 ]
No functional changes are intended, some drivers like mdraid will split
bio by internal processing, prepare to unify bio split codes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b2f5974079 ("block: fix ordering of recursive split IO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f963bdd64 ]
bio->issue_time_ns is only used by blk-iolatency, which can only be
enabled for rq-based disk, hence it's not necessary to initialize
the time for bio-based disk.
Meanwhile, if bio is split by blk_crypto_fallback_split_bio_if_needed(),
the issue time is not initialized for new split bio, this can be fixed
as well.
Noted the next patch will optimize better that bio issue time will
only be used when blk-iolatency is really enabled by the disk.
Fixes: 488f6682c8 ("block: blk-crypto-fallback for Inline Encryption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1733e88874 ]
Now that bio->bi_issue is only used by blk-iolatency to get bio issue
time, replace bio_issue with u64 time directly and remove bio_issue to
make code cleaner.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1f963bdd64 ("block: initialize bio issue time in blk_mq_submit_bio()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc06f9126 ]
Make sure to drop the reference to the saw device taken by
of_find_device_by_node() after retrieving its driver data during
probe().
Also drop the reference to the CPU node sooner to avoid leaking it in
case there is no saw node or device.
Fixes: 60f3692b5f ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1a68ba573 ]
Make sure to drop the references taken by of_find_device_by_node() when
looking up the thermal sensor and opp devices during probe on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 0bbb09b2af ("soc: mediatek: SVS: add mt8192 SVS GPU driver")
Cc: Roger Lu <roger.lu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250909095651.5530-3-johan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ab4f79ea9 ]
Make sure to drop the references taken by of_find_device_by_node() when
looking up the thermal sensor and opp devices during probe on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Cc: Roger Lu <roger.lu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250909095651.5530-2-johan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0454346d1c ]
Enabling compile testing should not enable every individual driver (we
have "allyesconfig" for that).
Fixes: 4a434abc40 ("firmware: meson-sm: enable build as module")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725075429.10056-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f89c7fb83a ]
On RK3588 with LPDDR4X memory, the cycle count as returned by
perf stat -a -e rockchip_ddr/cycles/ sleep 1
consistently reads half as much as what the actual DDR frequency is at.
For a LPDDR4X module running at 2112MHz, I get more like 1056059916
cycles per second, which is almost bang-on half what it should be. No,
I'm not mixing up megatransfers and megahertz.
Consulting the downstream driver, this appears to be because the RK3588
hardware specifically (and RK3528 as well, for future reference) needs a
multiplier of 2 to get to the correct frequency with everything but
LPDDR5.
The RK3588's actual memory bandwidth measurements in MB/s are correct
however, as confirmed with stress-ng --stream. This makes me think the
access counters are not affected in the same way. This tracks with the
vendor kernel not multiplying the access counts either.
Solve this by adding a new member to the dfi struct, which each SoC can
set to whatever they want, but defaults to 1 if left unset by the SoC
init functions. The event_get_count op can then use this multiplier if
the cycle count is requested.
The cycle multiplier is not used in rockchip_dfi_get_event because the
vendor driver doesn't use it there either, and we don't do other actual
bandwidth unit conversion stuff in there anyway.
Fixes: 481d97ba61 ("PM / devfreq: rockchip-dfi: add support for RK3588")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250530-rk3588-dfi-improvements-v1-1-6e077c243a95@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aeb7ed4bc ]
A value of 10 is not valid for "mediatek,pull-down-adv" and
"mediatek,pull-up-adv" properties which have defined values of 0-3. It
appears the "10" was written as a binary value. The driver only looks at
the lowest 2 bits, so the value "10" decimal works out the same as if
"2" was used.
Fixes: cd894e274b ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes: 19b6403f1e ("arm64: dts: mt8183: add mt8183 pumpkin board")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250722171152.58923-2-robh@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3374b5fb26 ]
When test suspend resume with 6.8 based kernel, system can't resume
and I got below error which can be also reproduced with 6.16 rc6+
kernel.
mtk-pcie-gen3 112f0000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f0000.pcie: PM: dpm_run_callback(): genpd_resume_noirq returns -110
mtk-pcie-gen3 112f0000.pcie: PM: failed to resume noirq: error -110
After investigation, looks pcie0 has the same problem as pcie1 as
decribed in commit 3d7fdd8e38 ("arm64: dts: mediatek: mt8195:
Remove suspend-breaking reset from pcie1").
Fixes: ecc0af6a3f ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250721095959.57703-1-guoqing.jiang@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe2a449a45 ]
tick_shutdown() sets the state of the clockevent device to detached
first and the invokes clockevents_exchange_device(), which in turn
invokes clockevents_switch_state().
But clockevents_switch_state() returns without invoking the device shutdown
callback as the device is already in detached state. As a consequence the
timer device is not shutdown when a CPU goes offline.
tick_shutdown() does this because it was originally invoked on a online CPU
and not on the outgoing CPU. It therefore could not access the clockevent
device of the already offlined CPU and just set the state.
Since commit 3b1596a21f tick_shutdown() is called on the outgoing CPU, so
the hardware device can be accessed.
Remove the state set before calling clockevents_exchange_device(), so that
the subsequent clockevents_switch_state() handles the state transition and
invokes the shutdown callback of the clockevent device.
[ tglx: Massaged change log ]
Fixes: 3b1596a21f ("clockevents: Shutdown and unregister current clockevents at CPUHP_AP_TICK_DYING")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20250906064952.3749122-2-maobibo@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a186120c78 ]
Code in gicv5_its_irq_domain_alloc() has two issues:
- it checks the wrong return value/variable when calling gicv5_alloc_lpi()
- The cleanup code does not take previous loop iterations into account
Fix both issues at once by adding the right gicv5_alloc_lpi() variable
check and by reworking the function cleanup code to take into account
current and previous iterations.
[ lpieralisi: Reworded commit message ]
Fixes: 57d72196df ("irqchip/gic-v5: Add GICv5 ITS support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/all/20250908082745.113718-4-lpieralisi@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfcd1fdaae ]
The "i" variable in gicv5_its_create_itt_two_level() needs to be signed
otherwise it can cause a forever loop in the function's cleanup path.
[ lpieralisi: Reworded commit message ]
Fixes: 57d72196df ("irqchip/gic-v5: Add GICv5 ITS support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/all/20250908082745.113718-3-lpieralisi@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b59a9f762 ]
If AT_SYSINFO_EHDR is missing the whole test needs to be skipped.
Currently this results in the following output:
TAP version 13
1..16
# AT_SYSINFO_EHDR is not present!
This output is incorrect, as "1..16" still requires the subtest lines to
be printed, which isn't done however.
Switch to the correct skipping functions, so the output now correctly
indicates that no subtests are being run:
TAP version 13
1..0 # SKIP AT_SYSINFO_EHDR is not present!
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-2-90f499dd35f8@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f15e0f9ef ]
The _rval register variable is meant to be an output operand of the asm
statement but is instead used as input operand.
clang 20.1 notices this and triggers -Wuninitialized warnings:
tools/testing/selftests/timers/auxclock.c:154:10: error: variable '_rval' is uninitialized when used here [-Werror,-Wuninitialized]
154 | return VDSO_CALL(self->vdso_clock_gettime64, 2, clockid, ts);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/testing/selftests/timers/../vDSO/vdso_call.h:59:10: note: expanded from macro 'VDSO_CALL'
59 | : "r" (_rval) \
| ^~~~~
tools/testing/selftests/timers/auxclock.c:154:10: note: variable '_rval' is declared here
tools/testing/selftests/timers/../vDSO/vdso_call.h:47:2: note: expanded from macro 'VDSO_CALL'
47 | register long _rval asm ("r3"); \
| ^
It seems the list of input and output operands have been switched around.
However as the argument registers are not always initialized they can not
be marked as pure inputs as that would trigger -Wuninitialized warnings.
Adding _rval as another input and output operand does also not work as it
would collide with the existing _r3 variable.
Instead reuse _r3 for both the argument and the return value.
Fixes: 6eda706a53 ("selftests: vDSO: fix the way vDSO functions are called for powerpc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-1-90f499dd35f8@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506180223.BOOk5jDK-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9fd5be6b ]
On repeated cold boots we occasionally hit a NULL pointer crash in
blk_should_throtl() when throttling is consulted before the throttle
policy is fully enabled for the queue. Checking only q->td != NULL is
insufficient during early initialization, so blkg_to_pd() for the
throttle policy can still return NULL and blkg_to_tg() becomes NULL,
which later gets dereferenced.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000156
...
pc : submit_bio_noacct+0x14c/0x4c8
lr : submit_bio_noacct+0x48/0x4c8
sp : ffff800087f0b690
x29: ffff800087f0b690 x28: 0000000000005f90 x27: ffff00068af393c0
x26: 0000000000080000 x25: 000000000002fbc0 x24: ffff000684ddcc70
x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
x20: 0000000000080000 x19: ffff000684ddcd08 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffff80008132a550 x15: 0000ffff98020fff
x14: 0000000000000000 x13: 1fffe000d11d7021 x12: ffff000688eb810c
x11: ffff00077ec4bb80 x10: ffff000688dcb720 x9 : ffff80008068ef60
x8 : 00000a6fb8a86e85 x7 : 000000000000111e x6 : 0000000000000002
x5 : 0000000000000246 x4 : 0000000000015cff x3 : 0000000000394500
x2 : ffff000682e35e40 x1 : 0000000000364940 x0 : 000000000000001a
Call trace:
submit_bio_noacct+0x14c/0x4c8
verity_map+0x178/0x2c8
__map_bio+0x228/0x250
dm_submit_bio+0x1c4/0x678
__submit_bio+0x170/0x230
submit_bio_noacct_nocheck+0x16c/0x388
submit_bio_noacct+0x16c/0x4c8
submit_bio+0xb4/0x210
f2fs_submit_read_bio+0x4c/0xf0
f2fs_mpage_readpages+0x3b0/0x5f0
f2fs_readahead+0x90/0xe8
Tighten blk_throtl_activated() to also require that the throttle policy
bit is set on the queue:
return q->td != NULL &&
test_bit(blkcg_policy_throtl.plid, q->blkcg_pols);
This prevents blk_should_throtl() from accessing throttle group state
until policy data has been attached to blkgs.
Fixes: a3166c5170 ("blk-throttle: delay initialization until configuration")
Co-developed-by: Liang Jie <liangjie@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Signed-off-by: Han Guangjiang <hanguangjiang@lixiang.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7942b226e6 ]
When executing modinfo null_blk, there is an error in the description
of module parameter mbps, and the output information of cache_size is
incomplete.The output of modinfo before and after applying this patch
is as follows:
Before:
[...]
parm: cache_size:ulong
[...]
parm: mbps:Cache size in MiB for memory-backed device.
Default: 0 (none) (uint)
[...]
After:
[...]
parm: cache_size:Cache size in MiB for memory-backed device.
Default: 0 (none) (ulong)
[...]
parm: mbps:Limit maximum bandwidth (in MiB/s).
Default: 0 (no limit) (uint)
[...]
Fixes: 058efe000b ("null_blk: add module parameters for 4 options")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6a2f50ab1 ]
Smatch reported the following warning in eic7700_pinctrl_probe():
drivers/pinctrl/pinctrl-eic7700.c:638 eic7700_pinctrl_probe()
warn: passing zero to 'PTR_ERR'
The root cause is that devm_regulator_get() may return NULL when
CONFIG_REGULATOR is disabled. In such case, IS_ERR_OR_NULL() triggers
PTR_ERR(NULL) which evaluates to 0, leading to passing a success code
as an error.
However, this driver cannot work without a regulator. To fix this:
- Change the check from IS_ERR_OR_NULL() to IS_ERR()
- Update Kconfig to explicitly select REGULATOR and
REGULATOR_FIXED_VOLTAGE, ensuring that the regulator framework is
always available.
This resolves the Smatch warning and enforces the correct dependency.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 5b797bcc00 ("pinctrl: eswin: Add EIC7700 pinctrl driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/aKRGiZ-fai0bv0tG@stanley.mountain/
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f062fc5b0 ]
Change the 'ret' variable in sh_pfc_pinconf_group_set() from unsigned
int to int, as it needs to store either negative error codes or zero
returned by sh_pfc_pinconf_set().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Fixes: d0593c363f ("pinctrl: sh-pfc: Propagate errors on group config")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250831084958.431913-4-rongqianfeng@vivo.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit def5612170 ]
Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc33bf0e09 ]
The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check
that the pointer is valid.
Fixes: e09bd5757b ("PM / devfreq: mtk-cci: Handle sram regulator probe deferral")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/aJTNHz8kk8s6Q2os@stanley.mountain/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27322753c8 ]
The dtbs_check validation for am335x-cm-t335.dtb flags an error
for an unevaluated 'num-serializer' property in the mcasp0 node.
This property is obsolete; it is not defined in the davinci-mcasp-audio
schema and is not used by the corresponding (or any) driver.
Remove this unused property to fix the schema validation warning.
Fixes: 48ab364478 ("ARM: dts: cm-t335: add audio support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830215957.285694-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af5b85505 ]
The ti,keep-vref-on property, defined as a boolean flag in the Device
Tree schema, was incorrectly assigned a value (<1>) in the DTS file,
causing a validation error: "size (4) error for type flag". Remove
the value to match the schema and ensure compatibility with the driver
using device_property_read_bool(). This fixes the dtbs_check error.
Fixes: ed05637c30 ("ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250822225052.136919-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9658a92fad ]
The ti,en-ck32k-xtal property, defined as a boolean in the Device Tree
schema, was incorrectly assigned a value (<1>) in the DTS file, causing
a validation error: "size (4) error for type flag". The driver uses
of_property_read_bool(), expecting a boolean. Remove the value to fix
the dtbs_check error.
Fixes: 262178b6b8 ("ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/all/20250822222530.113520-1-jihed.chaibi.dev@gmail.com/
Link: https://lore.kernel.org/r/20250822222530.113520-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 437054b1bb ]
The prototype of __vdso_gettimeofday() uses this struct. However
gettime.h's own includes do not provide a definition for it.
Add a forward declaration, similar to other used structs.
Fixes: 42874e4eb3 ("arch: vdso: consolidate gettime prototypes")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250815-vdso-sparc64-generic-2-v2-1-b5ff80672347@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d337eef4a ]
Current depth_updated has some problems:
1) depth_updated() will be called for each hctx, while all elevators
will update async_depth for the disk level, this is not related to hctx;
2) In blk_mq_update_nr_requests(), if previous hctx update succeed and
this hctx update failed, q->nr_requests will not be updated, while
async_depth is already updated with new nr_reqeuests in previous
depth_updated();
3) All elevators are using q->nr_requests to calculate async_depth now,
however, q->nr_requests is still the old value when depth_updated() is
called from blk_mq_update_nr_requests();
Those problems are first from error path, then mq-deadline, and recently
for bfq and kyber, fix those problems by:
- pass in request_queue instead of hctx;
- move depth_updated() after q->nr_requests is updated in
blk_mq_update_nr_requests();
- add depth_updated() call inside init_sched() method to initialize
async_depth;
- remove init_hctx() method for mq-deadline and bfq that is useless now;
Fixes: 77f1e0a52d ("bfq: update internal depth state when queue depth changes")
Fixes: 39823b47bb ("block/mq-deadline: Fix the tag reservation code")
Fixes: 42e6c6ce03 ("lib/sbitmap: convert shallow_depth from one word to the whole sbitmap")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250821060612.1729939-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be82483d1b ]
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fe ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c0c01a216 ]
When the generic vDSO does not provide time functions, as for example on
riscv32, then the time data store is not necessary.
Avoid allocating these time data pages when not used.
Fixes: df7fcbefa7 ("vdso: Add generic time data storage")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-1-d9b65750e49f@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9110e6f72 ]
Commit 4b30209255 ("selftests/xsk: Add tail adjustment tests and support
check") added a new global to xsk_xdp_progs.c, but left out the access in
the testapp_xdp_metadata_copy() function. Since bpf_map_update_elem() will
write to the whole bss section, it gets truncated. Fix by writing to
skel_rx->bss->count directly.
Fixes: 4b30209255 ("selftests/xsk: Add tail adjustment tests and support check")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250829-selftests-bpf-xsk_regression_fix-v1-1-5f5acdb9fe6b@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
