[ Upstream commit 8c70521238 ]
challenge_timestamp can be read an written by concurrent threads.
This was expected, but we need to annotate the race to avoid potential issues.
Following patch moves challenge_timestamp and challenge_count
to per-netns storage to provide better isolation.
Fixes: 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90fabae8a2 ]
When the GSO splitting feature of sch_cake is enabled, GSO superpackets
will be broken up and the resulting segments enqueued in place of the
original skb. In this case, CAKE calls consume_skb() on the original skb,
but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into
assuming the original skb still exists, when it really has been freed. Fix
this by adding the __NET_XMIT_STOLEN flag to the return value in this case.
Fixes: 0c850344d3 ("sch_cake: Conditionally split GSO segments")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231
Link: https://lore.kernel.org/r/20220831092103.442868-1-toke@toke.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fc29ff391 ]
strp_init() is called just a few lines above this csk->sk_user_data
check, it also initializes strp->work etc., therefore, it is
unnecessary to call strp_done() to cancel the freshly initialized
work.
And if sk_user_data is already used by KCM, psock->strp should not be
touched, particularly strp->work state, so we need to move strp_init()
after the csk->sk_user_data check.
This also makes a lockdep warning reported by syzbot go away.
Reported-and-tested-by: syzbot+9fc084a4348493ef65d2@syzkaller.appspotmail.com
Reported-by: syzbot+e696806ef96cdd2d87cd@syzkaller.appspotmail.com
Fixes: e557124023 ("kcm: Check if sk_user_data already set in kcm_attach")
Fixes: dff8baa261 ("kcm: Call strp_stop before strp_done in kcm_attach")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220827181314.193710-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a1a274e93 ]
This patch adds logic to compute the MDIO period based on
the i1clk, and thereafter write the MDIO period into the YU
MDIO config register. The i1clk resource from the ACPI table
is used to provide addressing to YU bootrecord PLL registers.
The values in these registers are used to compute MDIO period.
If the i1clk resource is not present in the ACPI table, then
the current default hardcorded value of 430Mhz is used.
The i1clk clock value of 430MHz is only accurate for boards
with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs
have i1clk = 500MHz, but can support a slower MDIO period.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20220826155916.12491-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1122f40072 ]
For now, enqueuing and dequeuing on-demand requests all start from
idx 0, this makes request distribution unfair. In the weighty
concurrent I/O scenario, the request stored in higher idx will starve.
Searching requests cyclically in cachefiles_ondemand_daemon_read,
makes distribution fairer.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Reported-by: Yongqing Li <liyongqing@bytedance.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220817065200.11543-1-yinxin.x@bytedance.com/ # v1
Link: https://lore.kernel.org/r/20220825020945.2293-1-yinxin.x@bytedance.com/ # v2
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c93ccd63b1 ]
The cache_size field of copen is specified by the user daemon.
If cache_size < 0, then the OPEN request is expected to fail,
while copen itself shall succeed. However, returning 0 is indeed
unexpected when cache_size is an invalid error code.
Fix this by returning error when cache_size is an invalid error code.
Changes
=======
v4: update the code suggested by Dan
v3: update the commit log suggested by Jingbo.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Suggested-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220818111935.1683062-1-sunke32@huawei.com/ # v2
Link: https://lore.kernel.org/r/20220818125038.2247720-1-sunke32@huawei.com/ # v3
Link: https://lore.kernel.org/r/20220826023515.3437469-1-sunke32@huawei.com/ # v4
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0955bf957 ]
The function neigh_timer_handler() is a timer handler that runs in an
atomic context. When used by rocker, neigh_timer_handler() calls
"kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in
atomic context bug will happen. One of the processes is shown below:
ofdpa_fib4_add()
...
neigh_add_timer()
(wait a timer)
neigh_timer_handler()
neigh_release()
neigh_destroy()
rocker_port_neigh_destroy()
rocker_world_port_neigh_destroy()
ofdpa_port_neigh_destroy()
ofdpa_port_ipv4_neigh()
kzalloc(sizeof(.., GFP_KERNEL) //may sleep
This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to
GFP_ATOMIC in order to mitigate the bug.
Fixes: 00fc0c51e3 ("rocker: Change world_ops API and implementation to be switchdev independant")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a4ce82212 ]
The same GPIO line can be shared by multiple phys for the coma mode pin.
If that is the case then, all the other phys that share the same line
will failed to be probed because the access to the gpio line is not
non-exclusive.
Fix this by making access to the gpio line to be nonexclusive using flag
GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be
probed.
Fixes: 738871b092 ("net: phy: micrel: add coma mode GPIO")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220830064055.2340403-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f612466ebe ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d2 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b05972f01e ]
The issue is the same to commit c2999f7fb0 ("net: sched: multiq: don't
call qdisc_put() while holding tree lock"). Qdiscs call qdisc_put() while
holding sch tree spinlock, which results sleeping-while-atomic BUG.
Fixes: c266f64dbf ("net: sched: protect block state with mutex")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220826013930.340121-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8ae9fe04 ]
xrs700x_read_port_counters() updates the stats from a worker using the
u64_stats_update_begin() version. This is okay on 32-UP since on the
reader side preemption is disabled.
On 32bit-SMP the writer can be preempted by the reader at which point
the reader will spin on the seqcount until writer continues and
completes the update.
Assigning the mib_mutex mutex to the underlying seqcount would ensure
proper synchronisation. The API for that on the u64_stats_init() side
isn't available. Since it is the only user, just use disable interrupts
during the update.
Use u64_stats_update_begin_irqsave() on the writer side to ensure an
uninterrupted update.
Fixes: ee00b24f32 ("net: dsa: add Arrow SpeedChips XRS700x driver")
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebe5555c2f ]
Referenced commit introduced nfp_policer_validate in the progress
installing rate limiter. This validate check the action id and will
reject police with CONTINUE, which is required to support ingress
police offload.
Fix this issue by allowing FLOW_ACTION_CONTINUE as notexceed action
id in nfp_policer_validate
Fixes: d97b4b105c ("flow_offload: reject offload for all drivers with invalid police parameters")
Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com>
Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220825080845.507534-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ce9f2bef7 ]
Commit 744d23c71a ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state") unveiled that the smsc911x driver was not
properly stopping and restarting the PHY during suspend/resume. Correct
that by indicating that the MAC is in charge of PHY PM operations and
ensure that all MDIO bus activity is quiescent during suspend.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Fixes: 2aa70f8649 ("net: smsc911x: Quieten netif during suspend")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220825023951.3220-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7498a457ec ]
Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would
have the checksum included up to next multiple of 4 (a 77 bytes packet
would have 3 bytes of ethernet checksum included). The check for the
value expects it in host (Little) endian.
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220825084955.684637-1-casper.casan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2da8eb834b ]
When disconnecting all devices, hci_conn_failed is used to cleanup
hci_conn object when the hci_conn object cannot be aborted.
The function hci_conn_failed requires the caller holds hdev->lock.
Fixes: 9b3628d79b ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f48735a9aa ]
To prevent multiple conn complete events, we shouldn't look up the
conn with hci_lookup_le_connect, since it requires the state to be
BT_CONNECT. By the time the duplicate event is processed, the state
might have changed, so we end up processing the new event anyway.
Change the lookup function to hci_conn_hash_lookup_ba.
Fixes: d5ebaa7c5f ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fd02d56da ]
This attempts to fix suspend performance when there is no connections by
not updating the event mask.
Fixes: ef61b6ea15 ("Bluetooth: Always set event mask on suspend")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b82a26d863 ]
Commit c8992cffbe ("Bluetooth: hci_event: Use of a function table to
handle Command Complete") was (presumably) meant to only refactor things
without any functional changes.
But it does have one undesirable side-effect, before *status would always
be set to skb->data[0] and it might be overridden by some of the opcode
specific handling. While now it always set by the opcode specific handlers.
This means that if the opcode is not known *status does not get set any
more at all!
This behavior change has broken bluetooth support for BCM4343A0 HCIs,
the hci_bcm.c code tries to configure UART attached HCIs at a higher
baudraute using vendor specific opcodes. The BCM4343A0 does not
support this and this used to simply fail:
[ 25.646442] Bluetooth: hci0: BCM: failed to write clock (-56)
[ 25.646481] Bluetooth: hci0: Failed to set baudrate
After which things would continue with the initial baudraute. But now
that hci_cmd_complete_evt() no longer sets status for unknown opcodes
*status is left at 0. This causes the hci_bcm.c code to think the baudraute
has been changed on the HCI side and to also adjust the UART baudrate,
after which communication with the HCI is broken, leading to:
[ 28.579042] Bluetooth: hci0: command 0x0c03 tx timeout
[ 36.961601] Bluetooth: hci0: BCM: Reset failed (-110)
And non working bluetooth. Fix this by restoring the previous
default "*status = skb->data[0]" handling for unknown opcodes.
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fc31465c5 ]
Precision markers need to be propagated whenever we have an ARG_CONST_*
style argument, as the verifier cannot consider imprecise scalars to be
equivalent for the purposes of states_equal check when such arguments
refine the return value (in this case, set mem_size for PTR_TO_MEM). The
resultant mem_size for the R0 is derived from the constant value, and if
the verifier incorrectly prunes states considering them equivalent where
such arguments exist (by seeing that both registers have reg->precise as
false in regsafe), we can end up with invalid programs passing the
verifier which can do access beyond what should have been the correct
mem_size in that explored state.
To show a concrete example of the problem:
0000000000000000 <prog>:
0: r2 = *(u32 *)(r1 + 80)
1: r1 = *(u32 *)(r1 + 76)
2: r3 = r1
3: r3 += 4
4: if r3 > r2 goto +18 <LBB5_5>
5: w2 = 0
6: *(u32 *)(r1 + 0) = r2
7: r1 = *(u32 *)(r1 + 0)
8: r2 = 1
9: if w1 == 0 goto +1 <LBB5_3>
10: r2 = -1
0000000000000058 <LBB5_3>:
11: r1 = 0 ll
13: r3 = 0
14: call bpf_ringbuf_reserve
15: if r0 == 0 goto +7 <LBB5_5>
16: r1 = r0
17: r1 += 16777215
18: w2 = 0
19: *(u8 *)(r1 + 0) = r2
20: r1 = r0
21: r2 = 0
22: call bpf_ringbuf_submit
00000000000000b8 <LBB5_5>:
23: w0 = 0
24: exit
For the first case, the single line execution's exploration will prune
the search at insn 14 for the branch insn 9's second leg as it will be
verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will
always be 0 so at runtime we don't get error for being greater than
UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just
sees reg->precise as false for both r2 registers in both states, hence
considers them equal for purposes of states_equal.
If we propagated precise markers using the backtracking support, we
would use the precise marking to then ensure that old r2 (UINT_MAX) was
within the new r2 (1) and this would never be true, so the verification
would rightfully fail.
The end result is that the out of bounds access at instruction 19 would
be permitted without this fix.
Note that reg->precise is always set to true when user does not have
CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static
or global functions)), hence this is only a problem when precision marks
need to be explicitly propagated (i.e. privileged users with CAP_BPF).
A simplified test case has been included in the next patch to prevent
future regressions.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823185300.406-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ab4cdcf03 ]
This patch does two things:
1. For matching against the arg type, the match should be against the
base type of the arg type, since the arg type can have different
bpf_type_flags set on it.
2. Uses switch casing to improve readability + efficiency.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220712210603.123791-1-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 508362ac66 ]
Before this commit, the BPF verifier required ARG_PTR_TO_MEM arguments
to be followed by ARG_CONST_SIZE holding the size of the memory region.
The helpers had to check that size in runtime.
There are cases where the size expected by a helper is a compile-time
constant. Checking it in runtime is an unnecessary overhead and waste of
BPF registers.
This commit allows helpers to accept pointers to memory without the
corresponding ARG_CONST_SIZE, given that they define the memory region
size in struct bpf_func_proto and use ARG_PTR_TO_FIXED_SIZE_MEM type.
arg_size is unionized with arg_btf_id to reduce the kernel image size,
and it's valid because they are used by different argument types.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220615134847.3753567-3-maximmi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8531aa1659 ]
This reverts commit 83810f84ec.
Turning off port power in shutdown did cause issues such as a laptop not
proprly powering off, and some specific usb devies failing to enumerate the
subsequent boot after a warm reset.
So revert this.
Fixes: 83810f84ec ("xhci: turn off port power in shutdown")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a593a62a9 ]
The remove path in xhci platform driver tries to remove and put both main
and shared hcds even if only a main hcd exists (one roothub)
This causes a null pointer dereference in reboot for those controllers.
Check that the shared_hcd exists before trying to remove it.
Fixes: e0fe986972 ("usb: host: xhci-plat: prepare operation w/o shared hcd")
Reported-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d776763f48 ]
The return type is supposed to be ssize_t, which is signed long,
but "r" was declared as unsigned int. This means that on 64 bit systems
we return positive values instead of negative error codes.
Fixes: 80a3511d70 ("cfg80211: add debugfs HT40 allow map")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e6481a3f3 ]
The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).
Fixes: a864e8f159 ("ALSA: hda: intel-nhlt: verify config type")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20220823122405.18464-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 868e8e5156 ]
Commit 20f85ef89d ("drm/i915/backlight: use unique backlight device
names") added support for multiple backlight devices on dual panel
systems, but did so with error handling on -EEXIST from
backlight_device_register(). Unfortunately, that triggered a warning in
dmesg all the way down from sysfs_add_file_mode_ns() and
sysfs_warn_dup().
Instead of optimistically always attempting to register with the default
name ("intel_backlight", which we have to retain for backward
compatibility), check if a backlight device with the name exists first,
and, if so, use the card and connector based name.
v2: reworked on top of the patch commit 20f85ef89d
("drm/i915/backlight: use unique backlight device names")
v3: fixed the ref count leak(Jani N)
Fixes: 20f85ef89d ("drm/i915/backlight: use unique backlight device names")
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com
(cherry picked from commit 4234ea3005)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d90525416 ]
Crucible + recent Mesa seems to sometimes hit:
GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER)
And it looks like we can also trigger this with gem_lmem_swapping, if we
modify the test to use slightly larger object sizes.
Looking closer it looks like we have the following issues in
migrate_copy():
- We are using plain integer in various places, which we can easily
overflow with a large object.
- We pass the entire object size (when the src is lmem) into
emit_pte() and then try to copy it, which doesn't work, since we
only have a few fixed sized windows in which to map the pages and
perform the copy. With an object > 8M we therefore aren't properly
copying the pages. And then with an object > 64M we trigger the
GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER).
So it looks like our copy handling for any object > 8M (which is our
CHUNK_SZ) is currently broken on DG2.
Fixes: da0595ae91 ("drm/i915/migrate: Evict and restore the flatccs capable lmem obj")
Testcase: igt@gem_lmem_swapping
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C<ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220805132240.442747-2-matthew.auld@intel.com
(cherry picked from commit 8676145eb2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0947ae1121 ]
While reading bpf_jit_limit, it can be changed concurrently via sysctl,
WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit
is long, so we need to add a paired READ_ONCE() to avoid load-tearing.
Fixes: ede95a63b5 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220823215804.2177-1-kuniyu@amazon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe7116f6d ]
There is a possible race condition (use-after-free) like below
(FREE) | (USE)
adf7242_remove | adf7242_channel
cancel_delayed_work_sync |
destroy_workqueue (1) | adf7242_cmd_rx
| mod_delayed_work (2)
|
The root cause for this race is that the upper layer (ieee802154) is
unaware of this detaching event and the function adf7242_channel can
be called without any checks.
To fix this, we can add a flag write at the beginning of adf7242_remove
and add flag check in adf7242_channel. Or we can just defer the
destructive operation like other commit 3e0588c291 ("hamradio: defer
ax25 kfree after unregister_netdev") which let the
ieee802154_unregister_hw() to handle the synchronization. This patch
takes the second option.
Fixes: 58e9683d14 ("net: ieee802154: adf7242: Fix OCL calibration
runs")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20220808034224.12642-1-linma@zju.edu.cn
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ec9fce4b3 ]
Commit 451ef36bd2 ("ip_tunnels: Add new flow flags field to ip_tunnel_key")
added a "flow_flags" member to struct ip_tunnel_key which was later used by
the commit in the fixes tag to avoid dropping packets with sources that
aren't locally configured when set in bpf_set_tunnel_key().
VXLAN and GENEVE were made to respect this flag, ip tunnels like IPIP and GRE
were not.
This commit fixes this omission by making ip_tunnel_init_flow() receive
the flow flags from the tunnel key in the relevant collect_md paths.
Fixes: b8fff74852 ("bpf: Set flow flag to allow any source IP in bpf_tunnel_key")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Paul Chaignon <paul@isovalent.com>
Link: https://lore.kernel.org/bpf/20220818074118.726639-1-eyal.birger@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14b20b784f ]
The verifier cannot perform sufficient validation of any pointers passed
into bpf_attr and treats them as integers rather than pointers. The helper
will then read from arbitrary pointers passed into it. Restrict the helper
to CAP_PERFMON since the security model in BPF of arbitrary kernel read is
CAP_BPF + CAP_PERFMON.
Fixes: af2ac3e13e ("bpf: Prepare bpf syscall to be used from kernel and user space.")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220816205517.682470-1-zhuyifei@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 583585e48d ]
Fix one kernel NULL pointer dereference as below:
[ 224.462334] Call Trace:
[ 224.462394] __tcp_bpf_recvmsg+0xd3/0x380
[ 224.462441] ? sock_has_perm+0x78/0xa0
[ 224.462463] tcp_bpf_recvmsg+0x12e/0x220
[ 224.462494] inet_recvmsg+0x5b/0xd0
[ 224.462534] __sys_recvfrom+0xc8/0x130
[ 224.462574] ? syscall_trace_enter+0x1df/0x2e0
[ 224.462606] ? __do_page_fault+0x2de/0x500
[ 224.462635] __x64_sys_recvfrom+0x24/0x30
[ 224.462660] do_syscall_64+0x5d/0x1d0
[ 224.462709] entry_SYSCALL_64_after_hwframe+0x65/0xca
In commit 9974d37ea7 ("skmsg: Fix invalid last sg check in
sk_msg_recvmsg()"), we change last sg check to sg_is_last(),
but in sockmap redirection case (without stream_parser/stream_verdict/
skb_verdict), we did not mark the end of the scatterlist. Check the
sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all
do not mark the end of sg. They are expected to use sg.end for end
judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here.
Fixes: 9974d37ea7 ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220809094915.150391-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02b9f26362 ]
In the event that devm_devfreq_add_device() fails the device's qos freq
list is left referencing df->idle_freq and df->boost_freq. Attempting to
initialize devfreq again after a probe deferral will then cause invalid
memory accesses in dev_pm_qos_add_request().
Fix this by dropping the requests in the error path.
Fixes: 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/493001/
Link: https://lore.kernel.org/r/20220708162632.3529864-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58ca14ed98 ]
Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where
packets are corrupted for the second and any further sockets bound to
the same umem. In other words, this does not affect the first socket
bound to the umem. The culprit for this bug is that the initialization
of the DMA addresses for the pre-populated xsk buffer pool entries was
not performed for any socket but the first one bound to the umem. Only
the linear array of DMA addresses was populated. Fix this by populating
the DMA addresses in the xsk buffer pool for every socket bound to the
same umem.
Fixes: 94033cd8e7 ("xsk: Optimize for aligned case")
Reported-by: Alasdair McWilliam <alasdair.mcwilliam@outlook.com>
Reported-by: Intrusion Shield Team <dnevil@intrusion.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alasdair McWilliam <alasdair.mcwilliam@outlook.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/xdp-newbies/6205E10C-292E-4995-9D10-409649354226@outlook.com/
Link: https://lore.kernel.org/bpf/20220812113259.531-1-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2986c51540 ]
The x86-android-tablets handling for the Chuwi Hi8 is only necessary with
the Android BIOS and it is causing problems with the Windows BIOS version.
Specifically when trying to register the already present touchscreen
x86_acpi_irq_helper_get() calls acpi_unregister_gsi(), this breaks
the working of the touchscreen and also leads to an oops:
[ 14.248946] ------------[ cut here ]------------
[ 14.248954] remove_proc_entry: removing non-empty directory 'irq/75', leaking at least 'MSSL0001:00'
[ 14.248983] WARNING: CPU: 3 PID: 440 at fs/proc/generic.c:718 remove_proc_entry
...
[ 14.249293] unregister_irq_proc+0xe0/0x100
[ 14.249305] free_desc+0x29/0x70
[ 14.249312] irq_free_descs+0x4b/0x80
[ 14.249320] mp_unmap_irq+0x5c/0x60
[ 14.249329] acpi_unregister_gsi_ioapic+0x2a/0x40
[ 14.249338] x86_acpi_irq_helper_get+0x4b/0x190 [x86_android_tablets]
[ 14.249355] x86_android_tablet_init+0x178/0xe34 [x86_android_tablets]
Add an init callback for the Chuwi Hi8, which detects when the Windows BIOS
is in use and exits with -ENODEV in that case, fixing this.
Fixes: 84c2dcdd47 ("platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220810141934.140771-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a90ed8d0c ]
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).
Fix the mask and other related definitions accordingly.
Fixes: 93e5eadd1f ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1653a7598 ]
1 regulator is listed but the number 2 is specified. This presumably
means we try to get a regulator with no name. Fix it.
Fixes: 462f7017a6 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/496323/
Link: https://lore.kernel.org/r/20220804073608.v4.2.I94b3c3e412b7c208061349f05659e126483171b1@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 032d579601 ]
Data Symbols scrambled is required for tps4 at link training 2.
Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to
work.
RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter
measurement with minimal equipment for embedded applications purpose
and is not required to be set during normal operation. Current
implementation always have RECOVERED_CLOCK_OUT_EN bit set which
cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent
tps4 from working.
This patch delete setting RECOVERED_CLOCK_OUT_EN to fix
SCRAMBLING_DISABLE be wrongly set at tps4.
Changes in v2:
-- fix Fixes tag
Changes in v3:
-- revise commit text
Changes in v4:
-- fix commit text newline
Changes in v5:
-- fix commit text line over 75 chars
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/497194/
Link: https://lore.kernel.org/r/1660258670-4200-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef3ac3ae14 ]
dpu_encoder_helper_phys_cleanup() was not populating neither
wb or intf to the intf_cfg before calling the reset_intf_cfg().
This causes the reset of the active bits of wb/intf to be
skipped which is incorrect.
Fix this by populating the relevant wb or intf indices correctly.
Fixes: ae4d721ce1 ("drm/msm/dpu: add an API to reset the encoder related hw blocks")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170)
Patchwork: https://patchwork.freedesktop.org/patch/494298/
Link: https://lore.kernel.org/r/1657912468-17254-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deffa2d75d ]
Some userspace presumes that the first connected connector is the main
display, where it's supposed to display e.g. the login screen. For
laptops, this should be the main panel.
This patch call drm_helper_move_panel_connectors_to_head() after
drm_bridge_connector_init() to make sure eDP stay at head of
connected connector list. This fixes unexpected corruption happen
at eDP panel if eDP is not placed at head of connected connector
list.
Changes in v2:
-- move drm_helper_move_panel_connectors_to_head() to
dpu_kms_drm_obj_init()
Changes in v4:
-- move drm_helper_move_panel_connectors_to_head() to msm_drm_init()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: ef7837ff09 ("drm/msm/dp: Add DP controllers for sc7280")
Patchwork: https://patchwork.freedesktop.org/patch/492581/
Link: https://lore.kernel.org/r/1657135928-31195-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
