[ Upstream commit c264294624 ]
In the New Control register bit 1 is either reserved, or has a different
function:
Out of Range Error Discard
When enabled, the ingress port discards any frames
if the Length field is between 1500 and 1536
(excluding 1500 and 1536) and with good CRC.
The actual bit for enabling IP multicast is bit 0, which was only
explicitly enabled for BCM5325 so far.
For older switch chips, this bit defaults to 0, so we want to enable it
as well, while newer switch chips default to 1, and their documentation
says "It is illegal to set this bit to zero."
So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit
also for other switch chips. While at it, rename it to (B53_)IP_MC as
that is how it is called in Broadcom code.
Fixes: 63cc54a6f0 ("net: dsa: b53: Fix egress flooding settings")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e4ebdc160 ]
BCM63XX's switch does not support MDIO scanning of external phys, so its
MACs needs to be manually configured for autonegotiated link speeds.
So b53_force_port_config() and b53_force_link() accordingly also when
mode is MLO_AN_PHY for those ports.
Fixes lower speeds than 1000/full on rgmii ports 4 - 7.
This aligns the behaviour with the old bcm63xx_enetsw driver for those
ports.
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a8a5477f ]
There is no guarantee that the port state override registers have their
default values, as not all switches support being reset via register or
have a reset GPIO.
So when forcing port config, we need to make sure to clear all fields,
which we currently do not do for the speed and flow control
configuration. This can cause flow control stay enabled, or in the case
of speed becoming an illegal value, e.g. configured for 1G (0x2), then
setting 100M (0x1), results in 0x3 which is invalid.
For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on
supported chips, as the bit can have different meanings on other chips,
e.g. for BCM5389 this controls scanning PHYs for link/speed
configuration.
Fixes: 5e004460f8 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f6115ad88 ]
If the memory allocation in gpiolib_seq_start() fails, the s->private
field remains uninitialized and is later dereferenced without checking
in gpiolib_seq_stop(). Initialize s->private to NULL before calling
kzalloc() and check it before dereferencing it.
Fixes: e348544f79 ("gpio: protect the list of GPIO devices with SRCU")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251103141132.53471-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5d527be7e ]
Looking up a GPIO controller by label that is the name of the software
node is wonky at best - the GPIO controller driver is free to set
a different label than the name of its firmware node. We're already being
passed a firmware node handle attached to the GPIO device to
swnode_get_gpio_device() so use it instead for a more precise lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: e7f9ff5dc9 ("gpiolib: add support for software nodes")
Link: https://lore.kernel.org/r/20251103-reset-gpios-swnodes-v4-4-6461800b6775@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c211f5d7cb ]
After registering a VLAN device and setting its feature flags, we need to
synchronize the VLAN features with the lower device. For example, the VLAN
device does not have the NETIF_F_LRO flag, it should be synchronized with
the lower device based on the NETIF_F_UPPER_DISABLES definition.
As the dev->vlan_features has changed, we need to call
netdev_update_features(). The caller must run after netdev_upper_dev_link()
links the lower devices, so this patch adds the netdev_update_features()
call in register_vlan_dev().
Fixes: fd867d51f8 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251030073539.133779-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d01f8136d4 ]
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e8486702 ]
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d064de05 ]
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d18a84edd ]
The internal switch on BCM63XX SoCs will unconditionally add 802.1Q VLAN
tags on egress to CPU when 802.1Q mode is enabled. We do this
unconditionally since commit ed409f3bba ("net: dsa: b53: Configure
VLANs while not filtering").
This is fine for VLAN aware bridges, but for standalone ports and vlan
unaware bridges this means all packets are tagged with the default VID,
which is 0.
While the kernel will treat that like untagged, this can break userspace
applications processing raw packets, expecting untagged traffic, like
STP daemons.
This also breaks several bridge tests, where the tcpdump output then
does not match the expected output anymore.
Since 0 isn't a valid VID, just strip out the VLAN tag if we encounter
it, unless the priority field is set, since that would be a valid tag
again.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251027194621.133301-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4daaf063f ]
Move brcm_leg_tag_rcv() definition to top.
This function is going to be shared between two different tags.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-2-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 3d18a84edd ("net: dsa: tag_brcm: legacy: fix untagged rx on unbridged ports for bcm63xx")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c21cf89a6 ]
The memory allocated for ptr using kvmalloc() is not freed on the last
error path. Fix that by freeing it on that error path.
Fixes: 9a24ce5e29 ("Bluetooth: btrtl: Firmware format v2 support")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c5f1f6468 ]
In hci_cmd_complete_evt(), if the command complete event has an unknown
opcode, we assume the first byte of the remaining skb->data contains the
return status. However, parameter data has previously been pulled in
hci_event_func(), which may leave the skb empty. If so, using skb->data[0]
for the return status uses un-init memory.
The fix is to check skb->len before using skb->data.
Reported-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a9a4bedfca6aa9d7fa24
Tested-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Fixes: afcb3369f4 ("Bluetooth: hci_event: Fix vendor (unknown) opcode status handling")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a74f038fa5 ]
The pt_dump_seq_puts() macro incorrectly uses seq_printf() instead of
seq_puts(). This is both a performance issue and conceptually wrong,
as the macro name suggests plain string output (puts) but the
implementation uses formatted output (printf).
The macro is used in ptdump.c:301 to output a newline character. Using
seq_printf() adds unnecessary overhead for format string parsing when
outputting this constant string.
This bug was introduced in commit 59c4da8640 ("riscv: Add support to
dump the kernel page tables") in 2020, which copied the implementation
pattern from other architectures that had the same bug.
Fixes: 59c4da8640 ("riscv: Add support to dump the kernel page tables")
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
Link: https://lore.kernel.org/r/20251018170451.3355496-1-hi@josie.lol
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060ea84a48 ]
Unwinding the stack of a task other than current, KASAN would report
"BUG: KASAN: out-of-bounds in walk_stackframe+0x41c/0x460"
There is a same issue on x86 and has been resolved by the commit
84936118bd ("x86/unwind: Disable KASAN checks for non-current tasks")
The solution could be applied to RISC-V too.
This patch also can solve the issue:
https://seclists.org/oss-sec/2025/q4/23
Fixes: 5d8544e2d0 ("RISC-V: Generic library routines and assembly")
Co-developed-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251022072608.743484-1-zhangchunyan@iscas.ac.cn
[pjw@kernel.org: clean up checkpatch issues]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a04ea57aae upstream.
The device bus LAN ID was obtained from PCI_FUNC(), but when a PF
port is passthrough to a virtual machine, the function number may not
match the actual port index on the device. This could cause the driver
to perform operations such as LAN reset on the wrong port.
Fix this by reading the LAN ID from port status register.
Fixes: a34b3e6ed8 ("net: txgbe: Store PCI info")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/B60A670C1F52CB8E+20251104062321.40059-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa997d2d2a upstream.
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Reported-by: syzbot+92a3745cea5ec6360309@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/690babec.050a0220.baf87.0064.GAE@google.com/
Link: https://lore.kernel.org/20251016132848.1b11bb37@gandalf.local.home
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27afd6e066 upstream.
vb2_ioctl_remove_bufs() call manipulates queue internal buffer list,
potentially overwriting some pointers used by the legacy fileio access
mode. Forbid that ioctl when fileio is active to protect internal queue
state between subsequent read/write calls.
CC: stable@vger.kernel.org
Fixes: a3293a8538 ("media: v4l2: Add REMOVE_BUFS ioctl")
Reported-by: Shuangpeng Bai <SJB7183@psu.edu>
Closes: https://lore.kernel.org/linux-media/5317B590-AAB4-4F17-8EA1-621965886D49@psu.edu/
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 758dbc756a upstream.
Some devices, like the Grandstream GUV3100 webcam, have an invalid UVC
descriptor where multiple entities share the same ID, this is invalid
and makes it impossible to make a proper entity tree without heuristics.
We have recently introduced a change in the way that we handle invalid
entities that has caused a regression on broken devices.
Implement a new heuristic to handle these devices properly.
Reported-by: Angel4005 <ooara1337@gmail.com>
Closes: https://lore.kernel.org/linux-media/CAOzBiVuS7ygUjjhCbyWg-KiNx+HFTYnqH5+GJhd6cYsNLT=DaA@mail.gmail.com/
Fixes: 0e2ee70291 ("media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID")
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2618849f31 upstream.
[BUG]
During development of a minor feature (make sure all btrfs_bio::end_io()
is called in task context), I noticed a crash in generic/388, where
metadata writes triggered new works after btrfs_stop_all_workers().
It turns out that it can even happen without any code modification, just
using RAID5 for metadata and the same workload from generic/388 is going
to trigger the use-after-free.
[CAUSE]
If btrfs hits an error, the fs is marked as error, no new
transaction is allowed thus metadata is in a frozen state.
But there are some metadata modifications before that error, and they are
still in the btree inode page cache.
Since there will be no real transaction commit, all those dirty folios
are just kept as is in the page cache, and they can not be invalidated
by invalidate_inode_pages2() call inside close_ctree(), because they are
dirty.
And finally after btrfs_stop_all_workers(), we call iput() on btree
inode, which triggers writeback of those dirty metadata.
And if the fs is using RAID56 metadata, this will trigger RMW and queue
new works into rmw_workers, which is already stopped, causing warning
from queue_work() and use-after-free.
[FIX]
Add a special handling for write_one_eb(), that if the fs is already in
an error state, immediately mark the bbio as failure, instead of really
submitting them.
Then during close_ctree(), iput() will just discard all those dirty
tree blocks without really writing them back, thus no more new jobs for
already stopped-and-freed workqueues.
The extra discard in write_one_eb() also acts as an extra safenet.
E.g. the transaction abort is triggered by some extent/free space
tree corruptions, and since extent/free space tree is already corrupted
some tree blocks may be allocated where they shouldn't be (overwriting
existing tree blocks). In that case writing them back will further
corrupting the fs.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 284922f4c5 ]
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd72baff22 ]
Add an assembly macro to refer runtime cost. It hides linker magic and
makes assembly more readable.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304153342.2016569-1-kirill.shutemov@linux.intel.com
Stable-dep-of: 284922f4c5 ("x86: uaccess: don't use runtime-const rewriting in modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91309a7082 ]
This was a suggestion by David Laight, and while I was slightly worried
that some micro-architecture would predict cmov like a conditional
branch, there is little reason to actually believe any core would be
that broken.
Intel documents that their existing cores treat CMOVcc as a data
dependency that will constrain speculation in their "Speculative
Execution Side Channel Mitigations" whitepaper:
"Other instructions such as CMOVcc, AND, ADC, SBB and SETcc can also
be used to prevent bounds check bypass by constraining speculative
execution on current family 6 processors (Intel® Core™, Intel® Atom™,
Intel® Xeon® and Intel® Xeon Phi™ processors)"
and while that leaves the future uarch issues open, that's certainly
true of our traditional SBB usage too.
Any core that predicts CMOV will be unusable for various crypto
algorithms that need data-independent timing stability, so let's just
treat CMOV as the safe choice that simplifies the address masking by
avoiding an extra instruction and doesn't need a temporary register.
Suggested-by: David Laight <David.Laight@aculab.com>
Link: https://www.intel.com/content/dam/develop/external/us/en/documents/336996-speculative-execution-side-channel-mitigations.pdf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 284922f4c5 ("x86: uaccess: don't use runtime-const rewriting in modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22c73d52a6 ]
The mds auth caps check should also validate the
fsname along with the associated caps. Not doing
so would result in applying the mds auth caps of
one fs on to the other fs in a multifs ceph cluster.
The bug causes multiple issues w.r.t user
authentication, following is one such example.
Steps to Reproduce (on vstart cluster):
1. Create two file systems in a cluster, say 'fsname1' and 'fsname2'
2. Authorize read only permission to the user 'client.usr' on fs 'fsname1'
$ceph fs authorize fsname1 client.usr / r
3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2'
$ceph fs authorize fsname2 client.usr / rw
4. Update the keyring
$ceph auth get client.usr >> ./keyring
With above permssions for the user 'client.usr', following is the
expectation.
a. The 'client.usr' should be able to only read the contents
and not allowed to create or delete files on file system 'fsname1'.
b. The 'client.usr' should be able to read/write on file system 'fsname2'.
But, with this bug, the 'client.usr' is allowed to read/write on file
system 'fsname1'. See below.
5. Mount the file system 'fsname1' with the user 'client.usr'
$sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/
6. Try creating a file on file system 'fsname1' with user 'client.usr'. This
should fail but passes with this bug.
$touch /kmnt_fsname1_usr/file1
7. Mount the file system 'fsname1' with the user 'client.admin' and create a
file.
$sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin
$echo "data" > /kmnt_fsname1_admin/admin_file1
8. Try removing an existing file on file system 'fsname1' with the user
'client.usr'. This shoudn't succeed but succeeds with the bug.
$rm -f /kmnt_fsname1_usr/admin_file1
For more information, please take a look at the corresponding mds/fuse patch
and tests added by looking into the tracker mentioned below.
v2: Fix a possible null dereference in doutc
v3: Don't store fsname from mdsmap, validate against
ceph_mount_options's fsname and use it
v4: Code refactor, better warning message and
fix possible compiler warning
[ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ]
Link: https://tracker.ceph.com/issues/72167
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53db6f25ee ]
The wake_up_bit() is called in ceph_async_unlink_cb(),
wake_async_create_waiters(), and ceph_finish_async_create().
It makes sense to switch on clear_bit() function, because
it makes the code much cleaner and easier to understand.
More important rework is the adding of smp_mb__after_atomic()
memory barrier after the bit modification and before
wake_up_bit() call. It can prevent potential race condition
of accessing the modified bit in other threads. Luckily,
clear_and_wake_up_bit() already implements the required
functionality pattern:
static inline void clear_and_wake_up_bit(int bit, unsigned long *word)
{
clear_bit_unlock(bit, word);
/* See wake_up_bit() for which memory barrier you need to use. */
smp_mb__after_atomic();
wake_up_bit(word, bit);
}
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5824ccba9a ]
The Coverity Scan service has detected potential
race condition in ceph_ioctl_lazyio() [1].
The CID 1591046 contains explanation: "Check of thread-shared
field evades lock acquisition (LOCK_EVASION). Thread1 sets
fmode to a new value. Now the two threads have an inconsistent
view of fmode and updates to fields correlated with fmode
may be lost. The data guarded by this critical section may
be read while in an inconsistent state or modified by multiple
racing threads. In ceph_ioctl_lazyio: Checking the value of
a thread-shared field outside of a locked region to determine
if a locked operation involving that thread shared field
has completed. (CWE-543)".
The patch places fi->fmode field access under ci->i_ceph_lock
protection. Also, it introduces the is_file_already_lazy
variable that is set under the lock and it is checked later
out of scope of critical section.
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1591046
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ed1e29cf ]
The Coverity Scan service has detected the calling of
wait_for_completion_killable() without checking the return
value in ceph_lock_wait_for_completion() [1]. The CID 1636232
defect contains explanation: "If the function returns an error
value, the error value may be mistaken for a normal value.
In ceph_lock_wait_for_completion(): Value returned from
a function is not checked for errors before being used. (CWE-252)".
The patch adds the checking of wait_for_completion_killable()
return value and return the error code from
ceph_lock_wait_for_completion().
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1636232
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7574f30337 ]
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c4ed5e073 ]
According to I2S specs audio data is sampled on the rising edge of the
clock and it can change on the falling one. When operating in normal mode
this SoC behaves the opposite so a clock polarity inversion is required
in this case.
This was tested on an OdroidC2 (Amlogic S905 SoC) board.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20251007-fix-i2s-polarity-v1-1-86704d9cda10@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66128f4287 ]
On m68k, check_sizetypes in headers_check reports:
./usr/include/asm/bootinfo-amiga.h:17: found __[us]{8,16,32,64} type without #include <linux/types.h>
This header file does not use any of the Linux-specific integer types,
but merely refers to them from comments, so this is a false positive.
As of commit c3a9d74ee4 ("kbuild: uapi: upgrade check_sizetypes()
warning to error"), this check was promoted to an error, breaking m68k
all{mod,yes}config builds.
Fix this by stripping simple comments before looking for Linux-specific
integer types.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/949f096337e28d50510e970ae3ba3ec9c1342ec0.1759753998.git.geert@linux-m68k.org
[nathan: Adjust comment and remove unnecessary escaping from slashes in
regex]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87064da2db ]
When using interrupt pin (INT A) as watchdog output all other
interrupt sources need to be disabled to avoid additional
resets. Resulting INT_A_MASK1 value is 55 (0x37).
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250902182235.6825-1-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3637d34b35 ]
Add bounds checking to prevent writes past framebuffer boundaries when
rendering text near screen edges. Return early if the Y position is off-screen
and clip image height to screen boundary. Break from the rendering loop if the
X position is off-screen. When clipping image width to fit the screen, update
the character count to match the clipped width to prevent buffer size
mismatches.
Without the character count update, bit_putcs_aligned and bit_putcs_unaligned
receive mismatched parameters where the buffer is allocated for the clipped
width but cnt reflects the original larger count, causing out-of-bounds writes.
Reported-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48b0652a95834717f190
Suggested-by: Helge Deller <deller@gmx.de>
Tested-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b31f7f725c ]
To make libthermal more cross compile friendly use pkg-config to locate
libnl3. Only if that fails fall back to hardcoded /usr/include/libnl3.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1375152bb0 ]
Instead of preserving mode, timestamp, and owner, for the object files
during installation, just preserve the mode and timestamp.
When installing as root, the installed files should be owned by root.
When installing as user, --preserve=ownership doesn't work anyway. This
makes --preserve=ownership rather pointless.
Signed-off-by: Emil Dahl Juhl <juhl.emildahl@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38ce0209a ]
small_const_nbits is defined in asm-generic/bitsperlong.h which
bitmap.h uses but doesn't include causing build failures in some build
systems. Add the missing #include.
Note the bitmap.h in tools has diverged from that of the kernel, so no
changes are made there.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maurice Lambert <mauricelambert434@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db740f5689 ]
The atomic instructions sc.q, llacq.{w/d}, screl.{w/d} were newly added
in the LoongArch Reference Manual v1.10, it is necessary to handle them
in insns_not_supported() to avoid putting a breakpoint in the middle of
a ll/sc atomic sequence, otherwise it will loop forever for kprobes and
uprobes.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9f866b2bb ]
fwnode_graph_get_next_subnode() may return fwnode backed by ACPI
device nodes and there has been no check these devices are present
in the system, unlike there has been on fwnode OF backend.
In order to provide consistent behaviour towards callers,
add a check for device presence by introducing
a new function acpi_get_next_present_subnode(), used as the
get_next_child_node() fwnode operation that also checks device
node presence.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251001102636.1272722-2-sakari.ailus@linux.intel.com
[ rjw: Kerneldoc comment and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 558ae45798 ]
When a UTP error occurs in isolation, UFS is not currently recoverable.
This is because the UTP error is not considered fatal in the error
handling code, leading to either an I/O timeout or an OCS error.
Add the UTP error flag to INT_FATAL_ERRORS so the controller will be
reset in this situation.
sd 0:0:0:0: [sda] tag#38 UNKNOWN(0x2003) Result: hostbyte=0x07
driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#38 CDB: opcode=0x28 28 00 00 51 24 e2 00 00 08 00
I/O error, dev sda, sector 42542864 op 0x0:(READ) flags 0x80700 phys_seg
8 prio class 2
OCS error from controller = 9 for tag 39
pa_err[1] = 0x80000010 at 2667224756 us
pa_err: total cnt=2
dl_err[0] = 0x80000002 at 2667148060 us
dl_err[1] = 0x80002000 at 2667282844 us
No record of nl_err
No record of tl_err
No record of dme_err
No record of auto_hibern8_err
fatal_err[0] = 0x804 at 2667282836 us
---------------------------------------------------
REGISTER
---------------------------------------------------
NAME OFFSET VALUE
STD HCI SFR 0xfffffff0 0x0
AHIT 0x18 0x814
INTERRUPT STATUS 0x20 0x1000
INTERRUPT ENABLE 0x24 0x70ef5
[mkp: commit desc]
Signed-off-by: Hoyoung Seo <hy50.seo@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250930061428.617955-1-hy50.seo@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba60189291 ]
During initialization, the EDVD_COREx_VOLT_FREQ registers for some cores
are still at reset values and not reflecting the actual frequency. This
causes get calls to fail. Set all cores to their respective max
frequency during probe to initialize the registers to working values.
Suggested-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86db0c32f1 ]
caches_show() overwrote its buffer on each iteration,
so only the last cache tag was visible in sysfs output.
Properly append with snprintf(buf + count, …).
Signed-off-by: Randall P. Embry <rpembry@gmail.com>
Message-ID: <20250926-v9fs_misc-v1-2-a8b3907fc04d@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ad865862a ]
The NTB epf host driver assumes the BAR number associated with a memory
window is just incremented from the BAR number associated with MW1. This
seems to have been enough so far but this is not really how the endpoint
side work and the two could easily become mis-aligned.
ntb_epf_mw_to_bar() even assumes that the BAR number is the memory window
index + 2, which means the function only returns a proper result if BAR_2
is associated with MW1.
Instead, fully describe and allow arbitrary NTB BAR mapping.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c2e86f7b5 ]
The output clock register offset used in clk_wzrd_register_output_clocks
was incorrectly referencing 0x3C instead of 0x38, which caused
misconfiguration of output dividers on Versal platforms.
Correcting the off-by-one error ensures proper configuration of output
clocks.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18db1ff2de ]
For some of the SCMI based platforms, the oem extended config may be
supported, but not for duty cycle purpose. Skip the duty cycle ops if
err return when trying to get duty cycle info.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e0d75258b ]
As described in AM335x Errata Advisory 1.0.42, WKUP_DEBUGSS_CLKCTRL
can't be disabled - the clock module will just be stuck in transitioning
state forever, resulting in the following warning message after the wait
loop times out:
l3-aon-clkctrl:0000:0: failed to disable
Just add the clock to enable_init_clks, so no attempt is made to disable
it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8fe3f07a3 ]
p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq)
if list_empty(&m->req_list).
However, if the pipe is full, we need to read more data and this used to
work prior to commit aaec5a95d5 ("pipe_read: don't wake up the writer
if the pipe is still full").
p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before
the commit above) triggered the unnecessary wakeup. This wakeup calls
p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux()
will notice EPOLLIN and schedule_work(&m->rq).
This no longer happens after the optimization above, change p9_fd_request()
to use p9_poll_mux() instead of only checking for EPOLLOUT.
Reported-by: syzbot+d1b5dace43896bc386c3@syzkaller.appspotmail.com
Tested-by: syzbot+d1b5dace43896bc386c3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68a2de8f.050a0220.e29e5.0097.GAE@google.com/
Link: https://lore.kernel.org/all/67dedd2f.050a0220.31a16b.003f.GAE@google.com/
Co-developed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Message-ID: <20250819161013.GB11345@redhat.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
