Generic:
Add binding coverage for Supm.
Microchip:
Add support for the picgx64 and its curiosity board. This is a PolarFire
SoC without the FPGA.
Add the missing tsu_clk for ptp on the macb on PolarFire SoC and resolve
a long-running problem with gpio interrupts being incorrectly described
on the platform.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCadOI5gAKCRB4tDGHoIJi
0jxXAP94SQeRxMv5UlPaz5qQfsDIDlH3wnPrbaKLkiKxke8QRwEAnv2sNIv6w6e9
b96heW7o3KCEEEha19tFQKqXV5Vcrg4=
=1yzS
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V devicetrees for v7.1
Generic:
Add binding coverage for Supm.
Microchip:
Add support for the picgx64 and its curiosity board. This is a PolarFire
SoC without the FPGA.
Add the missing tsu_clk for ptp on the macb on PolarFire SoC and resolve
a long-running problem with gpio interrupts being incorrectly described
on the platform.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: update mpfs gpio interrupts to better match the SoC
riscv: dts: microchip: add tsu clock to macb on mpfs
dt-bindings: riscv: Add Supm extension description
riscv: dts: microchip: remove POLARFIRE mention in Makefile
riscv: dts: microchip: add pic64gx and its curiosity kit
dt-bindings: riscv: microchip: document the PIC64GX curiosity kit
dt-bindings: timer: sifive,clint: add pic64gx compatibility
riscv: dts: microchip: add pinctrl nodes for mpfs/icicle kit
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
While the RV1103B only got a B-extension to its name, the SoC internals
were reworked heavily. So likely it's mainly pin compatible to the
non-B variant.
The dt-binding for the RV1103B clock driver is shared with the clock-
driver branch going into the clock-tree.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmnPiKMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcVGB/9TvEArrDeCimaXfLRWKcZtQkrpbmcIb2Kh
BdGY4cX4YS8g/77pBFg9LMt21dKI3jlmyR76Wf7i9iZVCcWnzcxrhCsB9unEi44c
jQHa5QJQ++7IXk6/2SrKHfabcmFoVBiDHVpGqbOw2jq8vcTF0IgWKDu5NzjjDUoT
jbvAxJa+JzTeqEvdZgTdFldPpwMUClqnQqVsTs1w6XlFyMNIRr2ItcJKFU6+JbQX
UWAlL0/v4v4e+YGsfd/VIXVHFyN81e/yI4s4OwZh2DtM+eFjTbphpJuiltvatqXS
fuUYjq0U0geWWJMQypDYsZBVXrlbRAICSSDkf8TUqWZSMxf9fFg6
=5y+y
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Support for the RV1103B SoC and the Onion Omega4 board using it.
While the RV1103B only got a B-extension to its name, the SoC internals
were reworked heavily. So likely it's mainly pin compatible to the
non-B variant.
The dt-binding for the RV1103B clock driver is shared with the clock-
driver branch going into the clock-tree.
* tag 'v7.1-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add Onion Omega4 Evaluation Board
dt-bindings: arm: rockchip: Add Omega4 Evaluation board
ARM: dts: rockchip: Add support for RV1103B
dt-bindings: soc: rockchip: grf: Add RV1103B compatibles
dt-bindings: clock: rockchip: Add RV1103B CRU support
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
as fix for the current release.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmnPiIcQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVsjB/wOmHnrqfSjPG0nWUUlXhAu9T2rRaSnRjvn
ZALER7Gf+Z103KONaJC8mUt4aa+PDAxCO82kO9mr8a+5wEHM+Ujz4hk2PrT0MrGe
9VHjd5HdU0NLMvmaeSHrBqJ3JQQokusvYJz1xEE/rP8Dc6hUmmjOq7IzjdbOcmCc
m+64bMPfif+YdKaoQ123Wjg8CJN36fVdDQRgvPiG6sb1WmyApx3xo9wWlZl+E1Gb
2Abi3TLvdQ/Xo1c9eqo//GblRQsCaTuOfJmwQoi2tVUyJe233RTP6XwrpHbav9LR
tFv7VjcZ+qrKZxrgzm/2v/I7YjtJMSy3tRwCict8MO91CGi3mPPs
=H+b0
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
A number of dt-schema cleanups that are log standing, so not suitable
as fix for the current release.
* tag 'v7.1-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Pass linux,code to the power key on rk3288-veyron-pinky
ARM: dts: rockchip: Fix LED node names on rk3288-phycore-rdk
ARM: dts: rockchip: Fix GMAC description n RK3288 boards
ARM: dts: rockchip: Fix RTC description on rk3288-firefly-reload
ARM: dts: rockchip: Add missing the touchscreen interrupt on rk3288-phycore-rdk
ARM: dts: rockchip: Fix the trackpad supply on rk3288-veyron-jerry
ARM: dts: rockchip: Fix the Bluetooth node name on rk3288-veyron
ARM: dts: rockchip: Remove invalid regulator-property from rk3288-veyron
ARM: dts: rockchip: Use mount-matrix on rk3188-bqedison2qc
ARM: dts: rockchip: Fix RTC compatible on rk3288-phycore-rdk
ARM: dts: rockchip: Move PHY reset to ethernet-phy node on rk3036 boards
ARM: dts: rockchip: Remove rockchip,grf from rk3288 tsadc
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The i.MX6SX LCDIF is not fully compatible with the i.MX28 LCDIF. The
i.MX6SX controller provides additional overlay registers (AS_CTRL) which
are not present on i.MX28.
Linux has supported the dedicated compatible string since commit
45d59d7040 ("drm: Add new driver for MXSFB controller").
Other known DT users such as U-Boot and Barebox already support
"fsl,imx6sx-lcdif", so removing the fallback compatible string is low risk
since this device is used for display output only.
Fix the following CHECK_DTB warning:
/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dtb: lcdif@2220000 (fsl,imx6sx-lcdif): compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sx-lcdif', 'fsl,imx28-lcdif'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Rename node name tcq to touchscreen to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dtb: tscadc@50030000 (fsl,imx25-tsadc): 'tcq@50030400' does not match any of the regexes: '^adc@[0-9a-f]+$', '^pinctrl-[0-9]+$', '^touchscreen@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/fsl,imx25-tsadc.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Disable the unused interface, to fix print an error message during boot:
mmc3: Failed to initialize a non-removable card
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Set `phy-mode' on network switch CPU ports to eliminate a warning:
mv88e6085 gpio-0:00: OF node /mdio-gpio/switch@0/ports/port@4 of CPU port 4 lacks the required "phy-mode" property
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Configure maximum speed for the switch PHYs according to the electrical
connections from PHY to RJ45 connector.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add missing CPU clock definitions and operating-points-v2 table for the
Cortex-A7 on i.MX7ULP to enable proper CPU frequency scaling and
integration with the cpufreq/OPP frameworks.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Deassert BOOT_EN after boot to separate BOOT_CFG
circuits from LCD signals.
Signed-off-by: Alexander Feilke <Alexander.Feilke@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.
Adds boot phase properties to essential resources in
tqma7 device trees. This includes UART, SD-Card, eMMC and QSPI.
Signed-off-by: Alexander Feilke <Alexander.Feilke@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.
Adds boot phase properties to essential resources in imx7s device trees.
This includes the buses aips1-3, iomuxc and SOC access.
Signed-off-by: Alexander Feilke <Alexander.Feilke@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
TQ-Systems is written with a hyphen. Correct the spelling.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.
MBa6ULx need regulator, SD-Card, UART and watchdog access during
boot process.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.
TQMa6UL need eMMC, I2C, GPIO and QSPI access during boot process.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.
All SoCs require buses (aips and spba), clock, iomuxc and SOC access
during boot process.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.
MBa6 need I2C, GPIO, SD-Card, UART and watchdog access during
boot process.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.
TQMa6 need eMMC, I2C, GPIO, regulator and QSPI access during
boot process.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.
All SoCs require buses (aips and spba), clock, iomuxc, ipu and
SOC access during boot process.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add the missing labels for the temperature sensor and the EEPROM.
In SoM variants A and B, the components are connected to different
I2C buses. These labels are needed to reference them in subsequent
device trees.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add required clocks and clock-names for ccm to fix below CHECK_DTBS
warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dtb: clock-controller@20c4000 (fsl,imx6q-ccm): clock-names:0: 'osc' was expected
from schema $id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add label for system clocks and add two missing clocks anaclk[1,2]. Prepare
for fixing ccm related CHECK_DTB warnings.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove undocumented aliases, which is not used in kernel to fix
CHECK_DTBS warnings.
arch/arm/boot/dts/nxp/mxs/imx28-tx28.dtb: aliases: 'lcdif_23bit_pins', 'lcdif_24bit_pins', 'reg_can_xcvr', 'spi_gpio', 'spi_mxs' do not match any of the regexes: '^[a-z][a-z0-9\\-]*$', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/aliases.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The compatible string "edt,edt-ft5x06" is neither documented nor used.
According to drivers/input/touchscreen/edt-ft5x06.c, ft5206, ft5306 and
ft5406 are compatible.
Use "edt,edt-ft5206" instead, as the datasheet does not specify the
exact touchscreen model.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove the undocumented fallback compatible string "mr25h256", as the
SPI core strips the vendor prefix.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/mxs/imx28-sps1.dtb: /apb@80000000/apbh-bus@80000000/spi@80014000/flash@0: failed to match any schema with compatible: ['everspin,mr25h256', 'mr25h256']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Rename gpios-reset to reset-gpios of hx8357 node to fix below CHECK_DTBS
warnings:
arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dtb: hx8357@0 (himax,hx8357b): Unevaluated properties are not allowed ('gpios-reset' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add the "led-" prefix to LED subnodes to fix the below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: leds (gpio-leds): 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
There are duplicate "empty" entries in the interrupt-names property of
the DMA controller. Rename them to "empty<n>" to fix below CHECK_DTBS
warnings.
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: dma-controller@80024000 (fsl,imx23-dma-apbx): interrupt-names:15: 'empty5' was expected
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove fsl,imx-osc26m from fixed-clock node to fix below CHECK_DTB
warnings:
arch/arm/boot/dts/nxp/imx/imx27-apf27.dtb: osc26m (fsl,imx-osc26m): compatible: ['fsl,imx-osc26m', 'fixed-clock'] is too long
from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Rename node name uart8250 to serial to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dtb: uart8250@3,200000 (ns8250): $nodename:0: 'uart8250@3,200000' does not match '^serial(@.*)?$'
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The property interrupts use default interrupt controllers. But pass down
gpio<n> as phandle. Correct it by use interrupts-extended.
Fixes: d8cae888aa ("ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove the redundant intermediate node between the pinmux and group nodes,
and add the missing "grp" suffix to the group node names.
Fix below CHECK_DTBS warnings:
arm/boot/dts/nxp/imx/imx27-apf27dev.dtb: iomuxc@10015000 (fsl,imx27-iomuxc): Unevaluated properties are not allowed ('imx27-apf27', 'imx27-apf27dev' were unexpected)
from schema $id: http://devicetree.org/schemas/pinctrl/fsl,imx27-iomuxc.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Rename node name iomuxc to pinmux. Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx1-apf9328.dtb: iomuxc@21c000 (fsl,imx1-iomuxc): $nodename:0: 'iomuxc@21c000' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
from schema $id: http://devicetree.org/schemas/pinctrl/fsl,imx27-iomuxc.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The muRata 1DX WiFi/BT chip is mounted on the DHCOM i.MX6ULL. This chip
has been discontinued and replaced by the muRata 1YN chip. The new chip
is a drop-in replacement of the old chip. To support both chips for the
i.MX6ULL DHCOR, drop the more specific compatible string and let the
driver auto-detect the chip type. Currently, there are no known quirks
that would apply only to one or the other chip.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The ov2680 only support 1 lane. Needn't additional property to descript it.
Remove it to fix below DTB_CHECK warnings:
camera@36 (ovti,ov2680): port:endpoint: 'clock-lanes', 'data-lanes' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add power supply, #sound-dai-cells and clock nodes for fsl,sgtl5000 to
fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: sgtl5000@a (fsl,sgtl5000): '#sound-dai-cells' is a required property
from schema $id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml#
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: sgtl5000@a (fsl,sgtl5000): 'clocks' is a required property
from schema $id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml#
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: sgtl5000@a (fsl,sgtl5000): 'VDDA-supply' is a required property
from schema $id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml#
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: sgtl5000@a (fsl,sgtl5000): 'VDDIO-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Replace the clock-frequency property with a fixed-clock providing the
32kHz input to the gpio-gate-clock.
Fix the following CHECK_DTBS warning:
ti-wifi-clock (gpio-gate-clock): 'clock-frequency' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
This update includes:
- device tree files for the Microchip LAN9691 SoC and its evaluation
board (Microchip EV23X71A)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCac7J9wAKCRCejrg/N2X7
/Sv6AP9vqTk9ImposrX16/oHw1K+b8IzjDVooZHeHkZSdbICVgD/Tl/RjRLJyfmN
aNuN1d/YNyr7euIlAxJtLG2TaZe4pQc=
=K6WU
-----END PGP SIGNATURE-----
Merge tag 'microchip-dt64-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip ARM64 device tree updates for v7.1
This update includes:
- device tree files for the Microchip LAN9691 SoC and its evaluation
board (Microchip EV23X71A)
* tag 'microchip-dt64-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: add EV23X71A board
dt-bindings: arm: AT91: document EV23X71A board
arm64: dts: microchip: add LAN969x support
arm64: dts: microchip: add LAN969x clock header file
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
- New Board Support
S32N79-RDB, Variscite DART-MX95, DART-MX91 with Sonata carrier boards,
Verdin iMX95 with multiple carrier boards (Yavia, Mallow, Ivy, Dahlia)
TQMa93xx/MBa93xxLA-MINI, SolidRun i.MX8MP HummingBoard IIoT,
SolidRun i.MX8MM SOM and EVB, SolidRun SolidSense-N8 board
Ka-Ro Electronics tx8m-1610 COM, GOcontroll Moduline IV and Moduline Mini,
NXP FRDM-IMX91S board, i.MX93 Wireless EVK board with Wireless SiP,
NXP i.MX8MP audio board v2.
- USB & Type-C Support
Type-C and USB nodes for imx943, correct power-fole for
imx8qxp-mek/imx8qm-mek.
- Audio Enhancements
PDM microphone, bt-sco, and WM8962 sound card support for i.MX952. AONMIX
MQS for i.MX95. Use audio-graph-card2 for imx8dxl-evk. WM8904 audio codec
for imx8mm-var-som.
- Thermal & Cooling
PF09/53 thermal zone, fan node, active cooling on A55, SCMI
sensor/lmm/cpu for imx943/imx94.
- Display Support
Multiple LVDS and parallel display overlays for TQ boards (imx91/imx93).
Parallel display for i.MX93. ontat,kd50g21-40nt-a1 panel for
imx93-9x9-qsb. pixpaper display overlay for i.MX93 FRDM.
- Networking
Multiple queue configuration on eqos for TQMa8MPxL.
MaxLinear PHY support, MCP251xFD CAN controller for imx8mm-var-som.
SDIO WiFi support (imx91-evk, imx8mp-evk, imx943-evk)
- Bluetooth Support
imx943-evk, imx93-14x14-evk, imx95-19x19-evk, imx8mp-evk, imx8mn-evk,
imx8mm-evk.
- Miscellaneous
xspi and MT35XU01G SPI NOR flash for i.MX952.
V2X/ELE mailbox nodes, SCMI misc ctrl-ids for imx94.
eDMA channel reservation for V2X, Cortex M7 support for imx95.
Ethos-U65 NPU and SRAM nodes for imx93.
Wire up DMA IRQ for PCIe for imx8qm-ss-hsio.
- Bug Fixes & Improvements
Complete pinmux for rcwsr12 to fix I2C bus recovery affect other module
pinmux for layscape platform.
Multiple bug fixes for GPIO polarity, IRQ types, pinmux configurations.
GICv3 PPI interrupt CPU mask cleanup across multiple SoCs.
Fixed Ethernet PHY IRQ types on TQ boards.
Fixed UART RTS/CTS muxing issues.
Fixed SD card issues on Kontron boards.
Fixed touch reset configuration.
Removed fallback ethernet-phy-ieee802.3-c22 where appropriate.
Move funnel outside from soc.
TMU sensor ID cleanup.
Change usdhc tuning step for eMMC and SD.
Hexadecimal format, readability improvements, duplicate removal.
-----BEGIN PGP SIGNATURE-----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=oF2l
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/dt
Krzysztof notes:
1. This might impact users of i.MX8MM SPDIF as compatible is being
replaced.
Frank Li writes:
i.MX arm64 device tree changes for 7.1:
- New Board Support
S32N79-RDB, Variscite DART-MX95, DART-MX91 with Sonata carrier boards,
Verdin iMX95 with multiple carrier boards (Yavia, Mallow, Ivy, Dahlia)
TQMa93xx/MBa93xxLA-MINI, SolidRun i.MX8MP HummingBoard IIoT,
SolidRun i.MX8MM SOM and EVB, SolidRun SolidSense-N8 board
Ka-Ro Electronics tx8m-1610 COM, GOcontroll Moduline IV and Moduline Mini,
NXP FRDM-IMX91S board, i.MX93 Wireless EVK board with Wireless SiP,
NXP i.MX8MP audio board v2.
- USB & Type-C Support
Type-C and USB nodes for imx943, correct power-fole for
imx8qxp-mek/imx8qm-mek.
- Audio Enhancements
PDM microphone, bt-sco, and WM8962 sound card support for i.MX952. AONMIX
MQS for i.MX95. Use audio-graph-card2 for imx8dxl-evk. WM8904 audio codec
for imx8mm-var-som.
- Thermal & Cooling
PF09/53 thermal zone, fan node, active cooling on A55, SCMI
sensor/lmm/cpu for imx943/imx94.
- Display Support
Multiple LVDS and parallel display overlays for TQ boards (imx91/imx93).
Parallel display for i.MX93. ontat,kd50g21-40nt-a1 panel for
imx93-9x9-qsb. pixpaper display overlay for i.MX93 FRDM.
- Networking
Multiple queue configuration on eqos for TQMa8MPxL.
MaxLinear PHY support, MCP251xFD CAN controller for imx8mm-var-som.
SDIO WiFi support (imx91-evk, imx8mp-evk, imx943-evk)
- Bluetooth Support
imx943-evk, imx93-14x14-evk, imx95-19x19-evk, imx8mp-evk, imx8mn-evk,
imx8mm-evk.
- Miscellaneous
xspi and MT35XU01G SPI NOR flash for i.MX952.
V2X/ELE mailbox nodes, SCMI misc ctrl-ids for imx94.
eDMA channel reservation for V2X, Cortex M7 support for imx95.
Ethos-U65 NPU and SRAM nodes for imx93.
Wire up DMA IRQ for PCIe for imx8qm-ss-hsio.
- Bug Fixes & Improvements
Complete pinmux for rcwsr12 to fix I2C bus recovery affect other module
pinmux for layscape platform.
Multiple bug fixes for GPIO polarity, IRQ types, pinmux configurations.
GICv3 PPI interrupt CPU mask cleanup across multiple SoCs.
Fixed Ethernet PHY IRQ types on TQ boards.
Fixed UART RTS/CTS muxing issues.
Fixed SD card issues on Kontron boards.
Fixed touch reset configuration.
Removed fallback ethernet-phy-ieee802.3-c22 where appropriate.
Move funnel outside from soc.
TMU sensor ID cleanup.
Change usdhc tuning step for eMMC and SD.
Hexadecimal format, readability improvements, duplicate removal.
* tag 'imx-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: (139 commits)
arm64: dts: imx8qxp-mek: switch Type-C connector power-role to dual
arm64: dts: imx8qm-mek: switch Type-C connector power-role to dual
arm64: dts: lx2162a-clearfog: set sfp connector leds function and source
arm64: dts: lx2162a-sr-som: add crypto & rtc aliases, model
arm64: dts: lx2160a-cex7: add rtc alias
arm64: dts: lx2160a: complete pinmux for rcwsr12 configuration word
arm64: dts: lx2160a: change zeros to hexadecimal in pinmux nodes
arm64: dts: lx2160a: add sda gpio references for i2c bus recovery
arm64: dts: lx2160a: rename pinmux nodes for readability
arm64: dts: lx2160a: remove duplicate pinmux nodes
arm64: dts: lx2160a: change i2c0 (iic1) pinmux mask to one bit
arm64: dts: lx2160a-cex7/lx2162a-sr-som: fix usd-cd & gpio pinmux
arm64: dts: freescale: imx8mp-moduline-display-106: add typec-power-opmode property
arm64: dts: imx8mp-tqma8mpql: Add DT overlays to explicit list
arm64: dts: imx8mp-evk: Specify ADV7535 register addresses
arm64: dts: imx8dxl-evk: Use audio-graph-card2 for wm8960-2 and wm8960-3
arm64: dts: imx943-evk: Add pf09/53 thermal zone
arm64: dts: imx943-evk: Add fan node and enable active cooling on A55
arm64: dts: imx943-evk: Add nxp,ctrl-ids for scmi_misc
arm64: dts: imx943: Add thermal support
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Various fixes and new additions across a number of devices. GPIO and PCI
are enabled on Tegra264 and the Jetson AGX Thor Developer Kit, allowing
it to boot via network and mass storage.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmnI9AIACgkQ3SOs138+
s6GpVg//WO5PA0vrqOPIH1RVdytiRqXlEzdY7NQCqtW7GLzX9dii1xmInf2/VO5q
Pk6t6F1MrzsLfV7IDvb4whfyAcFJ8yTmvvCNtTv3OO92NInPTEBv/LdSVGogxlj+
2c/Xnmyiy6Lks/nN5lCKLNou4ktWW8BYADo6xkNRMcVTMwzmfhOADFSj5w7sFSJe
GMuGxSDgMykw612oaQ9LvRZZ1hQnDihdlkPVNZZP05siXinZeWMwu+WwfSFbCbhu
zphMHBTdaU7FUOszBEx35zPwSsDVhfOEoH1S3A2109ojE1Kw0aTrcdoW2GPTXenZ
8WlZXhQMqPby6ij97LHpzLOMA1Pz2r/LOY+NllJr1CbW/xNL8UAXHDm+k0c+aAcD
Jn0371hbDVKnSWzOV50FKIorrXMi7BtD8YioAO1AniGz/vDymGHjPt0Wy2cvwIVk
zN8sTKy22X4RHLwfXqS7amIoLKaT+3BZ0p5VqFL9YZJ23xCuS7M7E+8EKSB4yQ9q
TjFa79adOV1Xl5AsVrmOj5U5gGXSP750xtIVgsCNngnyKLfYW3STRVVIC0PbNWiV
oWdlUpIWGnLHHDY+eGYNVIQ3NAHLJl2NJuMdZrNVdZIr77BR9/y3rDVc5KcYFxQZ
63NdsmddN/h0GPuQEyborGfHoz+GTgvDL7NG6Vg27mNmh1hqZy4=
=ubsZ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.1-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v7.1-rc1
Various fixes and new additions across a number of devices. GPIO and PCI
are enabled on Tegra264 and the Jetson AGX Thor Developer Kit, allowing
it to boot via network and mass storage.
* tag 'tegra-for-7.1-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add Tegra264 GPIO controllers
arm64: tegra: smaug: Enable SPI-NOR flash
arm64: tegra: Add Jetson AGX Thor Developer Kit support
arm64: tegra: Add PCI controllers on Tegra264
arm64: tegra: Fix RTC aliases
arm64: tegra: Drop redundant clock and reset names for TSEC
arm64: tegra: Fix snps,blen properties
dt-bindings: pci: Document the NVIDIA Tegra264 PCIe controller
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Various improvements for Tegra114 boards, as well as some legacy cleanup
for PAZ00 and Transformers devices.
-----BEGIN PGP SIGNATURE-----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=1bL1
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.1-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v7.1-rc1
Various improvements for Tegra114 boards, as well as some legacy cleanup
for PAZ00 and Transformers devices.
* tag 'tegra-for-7.1-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: paz00: Configure WiFi rfkill switch through device tree
ARM: tegra: transformers: Add connector node
ARM: tegra: Add External Memory Controller node on Tegra114
ARM: tegra: Add ACTMON node to Tegra114 device tree
ARM: tegra: lg-x3: Add node for capacitive buttons
ARM: tegra: lg-x3: Add USB and power related nodes
ARM: tegra: lg-x3: Add panel and bridge nodes
ARM: tn7: Adjust panel node
ARM: tegra: Add SOCTHERM support on Tegra114
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Introduce the Eliza, Glymur, Mahua, and IPQ5210 Qualcomm SoCs.
Introduce the Redmi 4A, Redmi Go, Arduino Monza (VENTUNO Q), Redmi Note
8T, Purwa EVK, ECS Liva QCS710, additional variants of the DB820c,
Ayaneo Pocket S2, Thundercomm AI Mini PC G1, Samsung Galaxy Core Prime
LTE Verizon Wireless, Wiko Pulp 4G, the Purwa-variant of ASUS Vivobook
S15, the Eliza MTP, and the Glymur and Mahua CRDs.
Introduce UFS support and flatten the DWC3 node on Hamoa. Enable UFS,
SDC, DisplayPort audio playback, and an EL2 overlay for the Hamoa IoT
EVK. Enable DisplayPort audio on the Hamoa CRD and add HDMI support on
the ASUS Zenbook A14. Reduce the duplication of thermal sensors across
Purwa and Hamoa.
Add the QPIC SPI NAND controller on IPQ5332 and IPQ9574. Describe and
enable the eMMC controller on IPQ9574.
Add display, audio/compute remoteprocs, QUP devices, thermal sensors,
display, and CoreSight on the Kaanapali platform. Enable audio, compute
display, PMIC, Bluetooth, and WiFi on the MTP. Describe PMIC, audio and
compute remoteprocs on QRD.
Add role-switching support for the tertiary USB controller on Lemans.
Enable the tertiary USB controller and the GPIO expander on the Lemans
EVK, and add an overlay for the IFP Mezzanine.
Add UFS, camera control interface, audio GPR, and FastRPC support on
Milos. Enable UFS, camera EEPROMs, and hall effect sensor on the
Fairphone FP6.
Add camera control interface and fix a variety of things on the Monaco
platform, add missing FastRPC compute banks. Add eMMC support, describe
the DisplayPort bridge and GPIO expander on the Monaco EVK. Add overlay
for EVK camera and the IFP mezzanine.
Add touchscreen to the Xiaomi Redmi 4A, 5A, and Go, and fix the board-id
on the 4A.
Add the ambient light and proximity sensor on the Asus ZenFone 2
Laser/Selfie.
On Kodiak-based boards, enable the ethernet and USB Type-A ports on the
Rb3Gen2, correct the LT9611 routing on the RubikPi3, add Bluetooth on
the IDP, and add front camera support on the Fairphone FP5.
Introduce an overlay for the Rb3Gen2 Industrial Mezzanine.
Describe DSI on the Monaco SoC and enable Bluetooth, WiFi and DSI/DP
bridge on the Ride board.
Describe the WiFi/BT combo chip properly on the QRB2210 RB1 and QRB4210.
The describe the DSI/DP bringde on the Arduino UnoQ.
01022af2d2 arm64: dts: qcom: sc7280-chrome-common: disable Venus
Introduce DSI display support on SC8280XP.
Add LLCC on SDM670 and another SPI controller on SDM630.
Properly describe the WiFi/BT chip on a variety of SDM845-based
devices. Introduce the "alert slider" on the OnePlus 6 and OnePlus 6T
devices.
Introduce the PRNG, describe the debug UART, and add the MDSS core reset
on SM6125. Enable the debug UART and fix various issues on the Xiaomi
Redmi Note 8. Describe the touchscreen on the Xiaomi Mi A3.
Properly describe the WiFi/BT combo chip in SM8150 HDK.
Improve the EAS properties on SM8550, in addition to various other
fixes. Introduce a new overlay for the HDK display card.
Introduce various smaller fixes across SM8450 and SM8650.
Add display support on SM8750 and enable DSI and DisplayPort on the MTP.
Also add tsens and thermal-zones.
Add ETR devices, flatten the USB controller node, and mark USB
controllers as wakeup-capable devices, on Talos.
Properly describe the IPA IMEM slice on a variety of platforms.
Drop redundant non-controllable regulator definitions from a variety of
boards.
Drop redundant VSYNC pin state definition from various platforms.
-----BEGIN PGP SIGNATURE-----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=H8oR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wjbD
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v7.1
Introduce the Eliza, Glymur, Mahua, and IPQ5210 Qualcomm SoCs.
Introduce the Redmi 4A, Redmi Go, Arduino Monza (VENTUNO Q), Redmi Note
8T, Purwa EVK, ECS Liva QCS710, additional variants of the DB820c,
Ayaneo Pocket S2, Thundercomm AI Mini PC G1, Samsung Galaxy Core Prime
LTE Verizon Wireless, Wiko Pulp 4G, the Purwa-variant of ASUS Vivobook
S15, the Eliza MTP, and the Glymur and Mahua CRDs.
Introduce UFS support and flatten the DWC3 node on Hamoa. Enable UFS,
SDC, DisplayPort audio playback, and an EL2 overlay for the Hamoa IoT
EVK. Enable DisplayPort audio on the Hamoa CRD and add HDMI support on
the ASUS Zenbook A14. Reduce the duplication of thermal sensors across
Purwa and Hamoa.
Add the QPIC SPI NAND controller on IPQ5332 and IPQ9574. Describe and
enable the eMMC controller on IPQ9574.
Add display, audio/compute remoteprocs, QUP devices, thermal sensors,
display, and CoreSight on the Kaanapali platform. Enable audio, compute
display, PMIC, Bluetooth, and WiFi on the MTP. Describe PMIC, audio and
compute remoteprocs on QRD.
Add role-switching support for the tertiary USB controller on Lemans.
Enable the tertiary USB controller and the GPIO expander on the Lemans
EVK, and add an overlay for the IFP Mezzanine.
Add UFS, camera control interface, audio GPR, and FastRPC support on
Milos. Enable UFS, camera EEPROMs, and hall effect sensor on the
Fairphone FP6.
Add camera control interface and fix a variety of things on the Monaco
platform, add missing FastRPC compute banks. Add eMMC support, describe
the DisplayPort bridge and GPIO expander on the Monaco EVK. Add overlay
for EVK camera and the IFP mezzanine.
Add touchscreen to the Xiaomi Redmi 4A, 5A, and Go, and fix the board-id
on the 4A.
Add the ambient light and proximity sensor on the Asus ZenFone 2
Laser/Selfie.
On Kodiak-based boards, enable the ethernet and USB Type-A ports on the
Rb3Gen2, correct the LT9611 routing on the RubikPi3, add Bluetooth on
the IDP, and add front camera support on the Fairphone FP5.
Introduce an overlay for the Rb3Gen2 Industrial Mezzanine.
Describe DSI on the Monaco SoC and enable Bluetooth, WiFi and DSI/DP
bridge on the Ride board.
Describe the WiFi/BT combo chip properly on the QRB2210 RB1 and QRB4210.
The describe the DSI/DP bringde on the Arduino UnoQ.
01022af2d2 arm64: dts: qcom: sc7280-chrome-common: disable Venus
Introduce DSI display support on SC8280XP.
Add LLCC on SDM670 and another SPI controller on SDM630.
Properly describe the WiFi/BT chip on a variety of SDM845-based
devices. Introduce the "alert slider" on the OnePlus 6 and OnePlus 6T
devices.
Introduce the PRNG, describe the debug UART, and add the MDSS core reset
on SM6125. Enable the debug UART and fix various issues on the Xiaomi
Redmi Note 8. Describe the touchscreen on the Xiaomi Mi A3.
Properly describe the WiFi/BT combo chip in SM8150 HDK.
Improve the EAS properties on SM8550, in addition to various other
fixes. Introduce a new overlay for the HDK display card.
Introduce various smaller fixes across SM8450 and SM8650.
Add display support on SM8750 and enable DSI and DisplayPort on the MTP.
Also add tsens and thermal-zones.
Add ETR devices, flatten the USB controller node, and mark USB
controllers as wakeup-capable devices, on Talos.
Properly describe the IPA IMEM slice on a variety of platforms.
Drop redundant non-controllable regulator definitions from a variety of
boards.
Drop redundant VSYNC pin state definition from various platforms.
* tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (254 commits)
arm64: dts: qcom: sm8250: Add missing CPU7 3.09GHz OPP
arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlay
arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree
dt-bindings: qcom: Document samsung,coreprimeltevzw
arm64: dts: qcom: msm8916-samsung-fortuna: Move SM5504 from rossa and refactor MUIC
arm64: dts: qcom: sdm670: add llcc
arm64: dts: qcom: qcm6490-fairphone-fp5: Add front camera support
arm64: dts: qcom: qcm6490-fairphone-fp5: Sort pinctrl nodes by pins
arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses
arm64: dts: qcom: milos: Add CCI busses
arm64: dts: qcom: purwa-iot-evk: Enable UFS
arm64: dts: qcom: eliza: Add thermal sensors
arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP
arm64: dts: qcom: sdm845-oneplus: Describe Wi-Fi/BT properly
arm64: dts: qcom: sdm845-google: Describe Wi-Fi/BT properly
arm64: dts: qcom: drop redundant zap-shader memory-region
arm64: dts: qcom: fix remaining gpu_zap_shader labels
arm64: dts: qcom: msm8996: fix indentation in sdhc2 node
arm64: dts: qcom: monaco-evk: enable UART6 for robot expansion board
arm64: dts: qcom: lemans-evk: enable UART0 for robot expansion board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: soc/omap updates for v7.1
* tag 'omap-for-v7.1/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New board, the Khadas Edge 2L. Newly added peripherals are the
OTP nvmem controllers for RK3528, RK3562 and RK3566/8, SPDIF on RK3576.
The RK3566/8 SoCs now also control the Pipe-clocks on their PCIe
controllers and UFSHC controller on RK3576 got an additional reset line.
Apart from that are of course individual board changes and fixes for
older issues that are not specific to the current development cycle.
* tag 'v7.1-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (44 commits)
arm64: dts: rockchip: configure hdmirx in Rock 5 ITX
arm64: dts: rockchip: assign pipe clock to rk356x PCIe lanes
arm64: dts: rockchip: Add mphy reset to ufshc node
arm64: dts: rockchip: Enable OTP controller for RK3528
arm64: dts: rockchip: Enable OTP controller for RK356x
arm64: dts: rockchip: Enable OTP controller for RK3562
arm64: dts: rockchip: Enable PCIe CLKREQ# for RK3588 on Rock 5b-5bp-5t series
arm64: dts: rockchip: add SD/eMMC aliases for ArmSom Sige5
arm64: dts: rockchip: Add SPDIF nodes to RK3576 device tree
arm64: dts: rockchip: Add Khadas Edge 2L board
dt-bindings: arm: rockchip: Add Khadas Edge 2L board
arm64: dts: rockchip: Fix RK3562 EVB2 model name
arm64: dts: rockchip: Correct Joystick Axes on Gameforce Ace
arm64: dts: rockchip: Correct Fan Supply for Gameforce Ace
Revert "arm64: dts: rockchip: add SPDIF audio to Beelink A1"
arm64: dts: rockchip: Fix Bluetooth stability on LCKFB TaiShan Pi
arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander
arm64: dts: rockchip: Add analog audio switches to RK3576 EVB1
arm64: dts: rockchip: Enable GPU on rk3566-pinenote
arm64: dts: rockchip: Make Jaguar PCIe-refclk pin use pull-up config
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
