[ Upstream commit 061795b345 ]
Airoha EN7523 specific bug
--------------------------
We found that some serial console may pull TX line to GROUND during board
boot time. Airoha uses TX line as one of its bootstrap pins. On the EN7523
SoC this may lead to booting in RESERVED boot mode.
It was found that some flashes operates incorrectly in RESERVED mode.
Micron and Skyhigh flashes are definitely affected by the issue,
Winbond flashes are not affected.
Details:
--------
DMA reading of odd pages on affected flashes operates incorrectly. Page
reading offset (start of the page) on hardware level is replaced by 0x10.
Thus results in incorrect data reading. As result OS loading becomes
impossible.
Usage of UBI make things even worse. On attaching, UBI will detects
corruptions (because of wrong reading of odd pages) and will try to
recover. For recovering UBI will erase and write 'damaged' blocks with
a valid information. This will destroy all UBI data.
Non-DMA reading is OK.
This patch detects booting in reserved mode, turn off DMA and print big
fat warning.
It's worth noting that the boot configuration is preserved across reboots.
Therefore, to boot normally, you should do the following:
- disconnect the serial console from the board,
- power cycle the board.
Fixes: a403997c12 ("spi: airoha: add SPI-NAND Flash controller driver")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20251125234047.1101985-2-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86a5b621be ]
Do not leave any resources hanging on the DSP side if
applying user settings fails.
Fixes: 768a3a3b32 ("ASoC: Intel: catpt: Optimize applying user settings")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9513f25056 ]
virtio pci uses word to mean "16 bits". mmio uses it to mean
"32 bits".
To avoid confusion, let's avoid the term in core virtio
altogether. Just say U64 to mean "64 bit".
Fixes: e7d4c1c5a5 ("virtio: introduce extended features")
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-ID: <ad53b7b6be87fc524f45abaeca0bb05fb3633397.1764225384.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 731ca4a4cc ]
Use %pe instead of %ps when printing ERR_PTR() values. %ps is intended
for string pointers, while %pe correctly prints symbolic error names
for error pointers returned via ERR_PTR().
This shows the returned error value more clearly.
Fixes: 67f27b8b3a ("pds_vdpa: subscribe to the pds_core events")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251018174705.1511982-1-alok.a.tiwari@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3f64c2eaf ]
If we fail to attach to a cgroup we are leaking the id. This adds
a new goto to free the id.
Fixes: 7d9896e9f6 ("vhost: Reintroduce kthread API and add mode selection")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251101194358.13605-1-michael.christie@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0ea2e9109 ]
When query_virtqueues() fails, the error log prints the variable err
instead of cmd->err. Since err may still be zero at this point, the
log message can misleadingly report a success value 0 even though the
command actually failed.
Even worse, once err is set to the first failure, subsequent logs
print that same stale value. This makes the error reporting appear
one step behind the actual failing queue index, which is confusing
and misleading.
Fix the log to report cmd->err, which reflects the real failure code
returned by the firmware.
Fixes: 1fcdf43ea6 ("vdpa/mlx5: Use async API for vq query command")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20250929134258.80956-1-alok.a.tiwari@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb55fc994 ]
@free will free the map handle not sync it. Fix the doc to match.
Fixes: bee8c7c24b ("virtio: introduce map ops in virtio core")
Message-Id: <f6ff1c7aff8401900bf362007d7fb52dfdb6a15b.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43236d8bba ]
Rewrite the comment for better grammar and clarity.
Fixes: 75a0a52be3 ("virtio: introduce an API to set affinity for a virtqueue")
Message-Id: <e317e91bd43b070e5eaec0ebbe60c5749d02e2dd.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e88a5a97d ]
Remove colons after "Returns" in virtio_map_ops function
documentation - both to avoid triggering an htmldoc warning
and for consistency with virtio_config_ops.
This affects map_page, alloc, need_sync, and max_mapping_size.
Fixes: bee8c7c24b ("virtio: introduce map ops in virtio core")
Message-Id: <c262893fa21f4b1265147ef864574a9bd173348f.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c15f42e091 ]
Fix grammar issues in the virtio_map_ops docs:
- missing article before "transport"
- "implements" -> "implement" to match subject
Fixes: bee8c7c24b ("virtio: introduce map ops in virtio core")
Message-Id: <3f7bcae5a984f14b72e67e82572b110acb06fa7e.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63598fba55 ]
Fix grammar in the description of @ctx
Fixes: c502eb85c3 ("virtio: introduce virtio_queue_info struct and find_vqs_info() config op")
Message-Id: <a5cf2b92573200bdb1c1927e559d3930d61a4af2.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7831791e77 ]
The finalize_features documentation uses a tab between words.
Use space instead.
Fixes: d16c0cd273 ("docs: driver-api: virtio: virtio on Linux")
Message-Id: <39d7685c82848dc6a876d175e33a1407f6ab3fc1.1763026134.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f811300085 ]
Documentation build reported:
WARNING: ./drivers/virtio/virtio_ring.c:3174 function parameter 'vaddr' not described in 'virtqueue_map_free_coherent'
WARNING: ./drivers/virtio/virtio_ring.c:3308 expecting prototype for virtqueue_mapping_error(). Prototype was for virtqueue_map_mapping_error() instead
The kernel-doc block for virtqueue_map_free_coherent() omitted the @vaddr parameter, and
the kernel-doc header for virtqueue_map_mapping_error() used the wrong function name
(virtqueue_mapping_error) instead of the actual function name.
This change updates:
- the function name in the comment to virtqueue_map_mapping_error()
- adds the missing @vaddr description in the comment for virtqueue_map_free_coherent()
Fixes: b41cb3bcf6 ("virtio: rename dma helpers")
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251110202920.2250244-1-kriish.sharma2006@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e40b6abe0b ]
virtio_vdpa_set_status() is declared as returning void, but it used
"return vdpa_set_status()" Since vdpa_set_status() also returns
void, the return statement is unnecessary and misleading.
Remove it.
Fixes: c043b4a8cf ("virtio: introduce a vDPA based transport")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Message-Id: <20251001191653.1713923-1-alok.a.tiwari@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 546dbb0223 ]
Starting with commit 69a8b62a7a ("riscv: acpi: avoid errors caused by
probing DT devices when ACPI is used"), riscv images no longer populate
devicetree if ACPI is enabled. This causes unit tests to fail which require
the root node to be set.
# Subtest: of_dtb
# module: of_test
1..2
# of_dtb_root_node_found_by_path: EXPECTATION FAILED at drivers/of/of_test.c:21
Expected np is not null, but is
# of_dtb_root_node_found_by_path: pass:0 fail:1 skip:0 total:1
not ok 1 of_dtb_root_node_found_by_path
# of_dtb_root_node_populates_of_root: EXPECTATION FAILED at drivers/of/of_test.c:31
Expected of_root is not null, but is
# of_dtb_root_node_populates_of_root: pass:0 fail:1 skip:0 total:1
not ok 2 of_dtb_root_node_populates_of_root
Skip those tests for RISCV if the root node is not populated.
Fixes: 69a8b62a7a ("riscv: acpi: avoid errors caused by probing DT devices when ACPI is used")
Cc: Han Gao <rabenda.cn@gmail.com>
Cc: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Paul Walmsley <pjw@kernel.org> # arch/riscv
Link: https://patch.msgid.link/20251023160415.705294-1-linux@roeck-us.net
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9ee3ff810 ]
When the MB_CHECK_ASSERT macro is enabled, we found that the
current validation logic in __mb_check_buddy has a gap in
detecting certain invalid buddy states, particularly related
to order-0 (bitmap) bits.
The original logic consists of three steps:
1. Validates higher-order buddies: if a higher-order bit is
set, at most one of the two corresponding lower-order bits
may be free; if a higher-order bit is clear, both lower-order
bits must be allocated (and their bitmap bits must be 0).
2. For any set bit in order-0, ensures all corresponding
higher-order bits are not free.
3. Verifies that all preallocated blocks (pa) in the group
have pa_pstart within bounds and their bitmap bits marked as
allocated.
However, this approach fails to properly validate cases where
order-0 bits are incorrectly cleared (0), allowing some invalid
configurations to pass:
corrupt integral
order 3 1 1
order 2 1 1 1 1
order 1 1 1 1 1 1 1 1 1
order 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Here we get two adjacent free blocks at order-0 with inconsistent
higher-order state, and the right one shows the correct scenario.
The root cause is insufficient validation of order-0 zero bits.
To fix this and improve completeness without significant performance
cost, we refine the logic:
1. Maintain the top-down higher-order validation, but we no longer
check the cases where the higher-order bit is 0, as this case will
be covered in step 2.
2. Enhance order-0 checking by examining pairs of bits:
- If either bit in a pair is set (1), all corresponding
higher-order bits must not be free.
- If both bits are clear (0), then exactly one of the
corresponding higher-order bits must be free
3. Keep the preallocation (pa) validation unchanged.
This change closes the validation gap, ensuring illegal buddy states
involving order-0 are correctly detected, while removing redundant
checks and maintaining efficiency.
Fixes: c9de560ded ("ext4: Add multi block allocator for ext4")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251106060614.631382-3-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6a45ee760 ]
ublk_ch_uring_cmd_local() may jump to the out label before
initialising the io pointer. This will cause trouble if DEBUG is
defined, because the pr_devel() call dereferences io. Clang reports:
drivers/block/ublk_drv.c:2403:6: error: variable 'io' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
2403 | if (tag >= ub->dev_info.queue_depth)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/block/ublk_drv.c:2492:32: note: uninitialized use occurs here
2492 | __func__, cmd_op, tag, ret, io->flags);
|
Fix this by initialising io to NULL and checking it before
dereferencing it.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e7972979 ]
On all AMD AM4 systems I have seen, e.g ASUS X470-i, Pro WS X570 Ace
and equivalent Gigabyte, amd-pstate does not initialize when the
x2apic is enabled in the BIOS. Kernel debug messages include:
[ 0.315438] acpi LNXCPU:00: Failed to get CPU physical ID.
[ 0.354756] ACPI CPPC: No CPC descriptor for CPU:0
[ 0.714951] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
I tracked this down to map_x2apic_id() checking device_declaration
passed in via the type argument of acpi_get_phys_id() via
map_madt_entry() while map_lapic_id() does not.
It appears these BIOSes use Processor statements for declaring the CPUs
in the ACPI namespace instead of processor device objects (which should
have been used). CPU declarations via Processor statements were
deprecated in ACPI 6.0 that was released 10 years ago. They should not
be used any more in any contemporary platform firmware.
I tried to contact Asus support multiple times, but never received a
reply nor did any BIOS update ever change this.
Fix amd-pstate w/ x2apic on am4 by allowing map_x2apic_id() to work with
CPUs declared via Processor statements for IDs less than 255, which is
consistent with ACPI 5.0 that still allowed Processor statements to be
used for declaring CPUs.
Fixes: 7237d3de78 ("x86, ACPI: add support for x2apic ACPI extensions")
Signed-off-by: René Rebe <rene@exactco.de>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251126.165513.1373131139292726554.rene@exactco.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f88425ef5 ]
In sy7636a_sensor_probe(), regulator_enable() is called but if
devm_hwmon_device_register_with_info() fails, the function returns
without calling regulator_disable(), leaving the regulator enabled
and leaking the reference count.
Switch to devm_regulator_get_enable() to automatically
manage the regulator resource.
Fixes: de34a40532 ("hwmon: sy7636a: Add temperature driver for sy7636a")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251126162602.2086-1-vulab@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 089702632f ]
XCD id is assigned to uuid, which causes some performance
drop in SPX mode, assigning AID back will resolve the
issue.
Fixes: 3a75edf93a ("drm/amdkfd: set uuid for each partition in topology")
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a79482699 ]
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields
of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the
ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4
then the last bit is always 1 so this code always sets .H_SYNC_POLARITY
and .V_SYNC_POLARITY to true.
This code is instead intended to check if the ATOM_HSYNC_POLARITY or
ATOM_VSYNC_POLARITY flags are set and reverse the result. In other
words, it's supposed to be a logical negate instead of a bitwise negate.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43cd4b634e ]
When DT is used to get the reference of 'rp1_node', it should be released
when not needed anymore, otherwise it is leaking.
In such a case, add the missing of_node_put() call at the end of the probe,
as already done in the error handling path.
Fixes: 49d63971f9 ("misc: rp1: RaspberryPi RP1 misc driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://patch.msgid.link/9bc1206de787fa86384f3e5ba0a8027947bc00ff.1762585959.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f30e7a423 ]
FMODE_NOCMTIME used to be just a hack for the legacy XFS handle-based
"invisible I/O", but commit e5e9b24ab8 ("nfsd: freeze c/mtime updates
with outstanding WRITE_ATTRS delegation") started using it from
generic callers.
I'm not sure other file systems are actually read for this in general,
so the above commit should get a closer look, but for it to make any
sense, file_update_time needs to respect the flag.
Lift the check from file_modified_flags to file_update_time so that
users of file_update_time inherit the behavior and so that all the
checks are done in one place.
Fixes: e5e9b24ab8 ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-3-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd9a42f1b ]
Currently the two high-level APIs use two helper functions to implement
almost all of the logic. Refactor the two helpers and the common logic
into a new file_update_time_flags routine that gets the iocb flags or
0 in case of file_update_time passed so that the entire logic is
contained in a single function and can be easily understood and modified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-2-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 7f30e7a423 ("fs: lift the FMODE_NOCMTIME check into file_update_time_flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6df0f649c ]
wait_for_completion_timeout() returns the remaining jiffies
(at least 1) on success or 0 on timeout, but never negative
error codes. The current code incorrectly checks for negative
values, causing timeouts to be ignored and treated as success.
Check for a zero return value to correctly identify and
handle timeout events.
Fixes: 0cf7befa3e ("greybus: gb-beagleplay: Add firmware upload API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251121064027.571-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9906efa545 ]
The use of firmware_loader is an implementation detail of drivers rather
than a dependency. FW_LOADER is typically selected rather than depended
on; the Rust abstractions should do the same thing.
Fixes: de6582833d ("rust: add firmware abstractions")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251106-b4-select-rust-fw-v3-1-771172257755@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b97d46dd ]
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c5f4a5347 ]
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273.
Fixes: dc0b943523 ("gfs: Don't use GFP_NOFS in gfs2_unstuff_dinode")
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd41d3420e ]
This configuration was missing from the initial commit.
Found by Jiri Benc <jbenc@redhat.com>
Fixes: c0a3873b99 ("ASoC: nau8325: new driver")
Cc: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-3-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2c7e5e17c0 upstream.
clang W=1 builds warn:
nau8325.c:430:13: error: variable 'n2_max' is uninitialized when used here [-Werror,-Wuninitialized]
which are false positive, because the variables will be always
initialized when used (guarded by mclk_max!=0 check). However
initializing them upfront makes the code more obvious and easier, plus
it silences the warning.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203140611.87191-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b4d072c98e ]
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-2-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: cd41d3420e ("ASoC: nau8325: add missing build config")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a2416892e ]
Clockevents cannot be deregistered so suppress the bind attributes to
prevent the driver from being unbound and releasing the underlying
resources after registration.
Even if the driver can currently only be built-in, also switch to
builtin_platform_driver() to prevent it from being unloaded should
modular builds ever be enabled.
Fixes: cec32ac758 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251111153226.579-4-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b452d2c97e ]
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init. Device managed resource actions
similarly cannot be discarded.
The "_probe" suffix of the driver structure name prevents modpost from
warning about this so replace it to catch any similar future issues.
Fixes: cec32ac758 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: stable@vger.kernel.org # 6.16
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251017054943.7195-1-johan@kernel.org
Stable-dep-of: 6a2416892e ("clocksource/drivers/nxp-stm: Prevent driver unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e25f964cf4 ]
The driver does not support unbinding (e.g. as clockevents cannot be
deregistered) so suppress the bind attributes to prevent the driver from
being unbound and rebound after registration (and disabling the timer
when reprobing fails).
Even if the driver can currently only be built-in, also switch to
builtin_platform_driver() to prevent it from being unloaded should
modular builds ever be enabled.
Fixes: bee33f22d7 ("clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251111153226.579-3-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aa10f0e2e ]
Clockevents cannot be deregistered so suppress the bind attributes to
prevent the driver from being unbound and releasing the underlying
resources after registration.
Fixes: 4891f01527 ("clocksource/drivers/arm_arch_timer: Add standalone MMIO driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20251111153226.579-2-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b38a8b31e ]
The purpose of the devm_add_action_or_reset() helper is to call the
action function in case adding an action ever fails so drop the clock
source deregistration from the error path to avoid deregistering twice.
Fixes: cec32ac758 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251017055039.7307-1-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ba8e2aae1 ]
The ralink_systick_init() function does not release all acquired resources
on its error paths. If irq_of_parse_and_map() or a subsequent call fails,
the previously created I/O memory mapping and IRQ mapping are leaked.
Add goto-based error handling labels to ensure that all allocated
resources are correctly freed.
Fixes: 1f2acc5a8a ("MIPS: ralink: Add support for systick timer found on newer ralink SoC")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251030090710.1603-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce04ec03a9 ]
The kernel BOs unnecessarily got added to the external objects list
of drm_gpuvm, when mapping to GPU, which would have resulted in few
extra CPU cycles being spent at the time of job submission as
drm_exec_until_all_locked() loop iterates over all external objects.
Kernel BOs are private to a VM and so they share the dma_resv object of
the dummy GEM object created for a VM. Use of DRM_EXEC_IGNORE_DUPLICATES
flag ensured the recursive locking of the dummy GEM object was ignored.
Also no extra space got allocated to add fences to the dma_resv object
of dummy GEM object. So no other impact apart from few extra CPU cycles.
This commit sets the pointer to dma_resv object of GEM object of
kernel BOs before they are mapped to GPU, to prevent them from
being added to external objects list.
v2: Add R-bs and fixes tags
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251120172118.2741724-1-akash.goel@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7ab6f9466 ]
The original addition of cache information for the Amlogic S922X SoC
used the wrong next-level cache node for CPU cores 100 and 101,
incorrectly referencing `l2_cache_l`. These cores actually belong to
the big cluster and should reference `l2_cache_b`. Update the device
tree accordingly.
Fixes: e7f85e6c15 ("arm64: dts: amlogic: Add cache information to the Amlogic S922X SoC")
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251123-fixkhadas-v1-1-045348f0a4c2@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62356fccb1 ]
In some cases, this logic can result in doorbell writes being
skipped when they should not have been (at least on GEN3 HW),
so remove it. This also means that the mb() can be safely
downgraded to dma_wmb().
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-9-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eef3ad030b ]
The GEN3 hardware does not appear to support IBK_LOCAL_DMA_LKEY. Attempts
to use it will result in an AE.
Fixes: eb31dfc2b4 ("RDMA/irdma: Restrict Memory Window and CQE Timestamping to GEN3")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-8-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71d3bdae5e ]
The HW disables bounds checking for MRs with a length of zero, so
the driver will only allow a zero length MR if the "all_memory"
flag is set, and this flag is only set if IB_PD_UNSAFE_GLOBAL_RKEY
is set for the PD.
This means that the "get_dma_mr" method will currently fail unless
the IB_PD_UNSAFE_GLOBAL_RKEY flag is set. This has not been an issue
because the "get_dma_mr" method is only ever invoked if the device
does not support the local DMA key or if IB_PD_UNSAFE_GLOBAL_RKEY
is set, and so far, all IRDMA HW supports the local DMA lkey.
However, some new HW does not support the local DMA lkey, so the
"get_dma_mr" method needs to work without IB_PD_UNSAFE_GLOBAL_RKEY
being set.
To support HW that does not allow the local DMA lkey, the logic has
been changed to pass an explicit flag to indicate when a dma_mr is
being created so that the zero length will be allowed.
Also, the "all_memory" flag has been forced to false for normal MR
allocation since these MRs are never supposed to provide global
unsafe rkey semantics anyway; only the MR created with "get_dma_mr"
should support this.
Fixes: bb6d73d9ad ("RDMA/irdma: Prevent zero-length STAG registration")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-7-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eff1ecce3 ]
Removes write to IRDMA_PFINT_AEQCTL register prior to destroying AEQ,
as this register does not exist in GEN3+ hardware and this kind of IRQ
configuration is no longer required.
Fixes: b800e82feb ("RDMA/irdma: Add GEN3 support for AEQ and CEQ")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-5-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e13d880eb ]
During a refactor of the irdma GEN2 code, the kfree of the irdma_pci_f struct
in icrdma_remove(), which was originally introduced upstream as part of
commit 80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
was accidentally removed.
Fixes: 0c2b80cac9 ("RDMA/irdma: Refactor GEN2 auxiliary driver")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-4-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
