[ Upstream commit 8a70a26c9f ]
The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8
bytes via memset without checking the buffer size parameter. This allows
unprivileged userspace to trigger an out-of bounds kernel memory write
by passing a small buffer, leading to potential privilege
escalation.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a65c0cb0f ]
tipc_aead_users_dec() calls rcu_dereference(aead) twice: once to store
in 'tmp' for the NULL check, and again inside the atomic_add_unless()
call.
Use the already-dereferenced 'tmp' pointer consistently, matching the
correct pattern used in tipc_aead_users_inc() and tipc_aead_users_set().
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260203145621.17399-1-git@danielhodges.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b831ebda ]
We need to set also write_page_raw in ecc structure to allow
choosing SW ECC instead of HW one, otherwise write operation fail.
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a52e4f2dff ]
commit 13b1f8e25b ("usb: dwc2: Force mode optimizations") removed the
dwc2_force_mode(hsotg, true) in dwc2_force_dr_mode() if dr_mode is host.
But this brings a bug: the controller fails to resume back as host,
further debugging shows that the controller is resumed as peripheral.
The reason is dwc2_force_dr_mode() missed the host mode forcing, and
when resuming from s2ram, GINTSTS is 0 by default, dwc2_is_device_mode
in dwc2_resume() misreads this as the controller is in peripheral mode.
Fix the resume failure by adding back the dwc2_force_mode(hsotg, true).
Then an obvious question is: why this bug hasn't been observed and fixed
for about six years? There are two resons: most dwc2 platforms set the
dr_mode as otg; Some platforms don't have suspend & resume support yet.
Fixes: 13b1f8e25b ("usb: dwc2: Force mode optimizations")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260129021534.10411-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54aaa3b387 ]
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context.
Fixes: 99288de360 ("usb: dwc3: add an alternate path in vbus_draw callback")
Cc: stable <stable@kernel.org>
Tested-by: Samuel Wu <wusamuel@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204054155.3063825-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58fbf08935 ]
When dw_pcie_iatu_setup() configures outbound address translation for both
type PCIE_ATU_TYPE_MEM and PCIE_ATU_TYPE_IO, the iATU index to use is
incremented before calling dw_pcie_prog_outbound_atu().
However for msg_atu_index, the index is not incremented before use,
causing the iATU index to be the same as the last configured iATU index,
which means that it will incorrectly use the same iATU index that is
already in use, breaking outbound address translation.
In total there are three problems with this code:
-It assigns msg_atu_index the same index that was used for the last
outbound address translation window, rather than incrementing the index
before assignment.
-The index should only be incremented (and msg_atu_index assigned) if the
use_atu_msg feature is actually requested/in use (pp->use_atu_msg is set).
-If the use_atu_msg feature is requested/in use, and there are no outbound
iATUs available, the code should return an error, as otherwise when this
this feature is used, it will use an iATU index that is out of bounds.
Fixes: e1a4ec1a95 ("PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260127151038.1484881-6-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b85f369b81 ]
When both KASAN and SLAB_STORE_USER are enabled, accesses to
struct kasan_alloc_meta fields can be misaligned on 64-bit architectures.
This occurs because orig_size is currently defined as unsigned int,
which only guarantees 4-byte alignment. When struct kasan_alloc_meta is
placed after orig_size, it may end up at a 4-byte boundary rather than
the required 8-byte boundary on 64-bit systems.
Note that 64-bit architectures without HAVE_EFFICIENT_UNALIGNED_ACCESS
are assumed to require 64-bit accesses to be 64-bit aligned.
See HAVE_64BIT_ALIGNED_ACCESS and commit adab66b71a ("Revert:
"ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"") for more details.
Change orig_size from unsigned int to unsigned long to ensure proper
alignment for any subsequent metadata. This should not waste additional
memory because kmalloc objects are already aligned to at least
ARCH_KMALLOC_MINALIGN.
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo
Suggested-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 6edf2576a6 ("mm/slub: enable debugging memory wasting of kmalloc")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo/
Link: https://patch.msgid.link/20260113061845.159790-2-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8ef441811 ]
Ensure that the exception event handling work is explicitly flushed during
suspend when the runtime power management level is set to UFS_PM_LVL_0.
When the RPM level is zero, the device power mode and link state both
remain active. Previously, the UFS core driver bypassed flushing exception
event handling jobs in this configuration. This created a race condition
where the driver could attempt to access the host controller to handle an
exception after the system had already entered a deep power-down state,
resulting in a system crash.
Explicitly flush this work and disable auto BKOPs before the suspend
callback proceeds. This guarantees that pending exception tasks complete
and prevents illegal hardware access during the power-down sequence.
Fixes: 57d104c153 ("ufs: add UFS power management support")
Signed-off-by: Thomas Yen <thomasyen@google.com>
Cc: Stable Tree <stable@vger.kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260129165156.956601-1-thomasyen@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36c0de0257 ]
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too.
Cc: stable@vger.kernel.org
Fixes: 7819e05a0d ("perf/arm-cmn: Revamp model detection")
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26aa529501 ]
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash.
Fixes: e954a1bd16 ("remoteproc: imx_rproc: Use imx specific hook for find_loaded_rsc_table")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260129-imx-rproc-fix-v3-1-fc4e41e6e750@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912d1c6680 ]
Commit 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle
error better") intended to make device trimming continue even if one
device fails, tracking failures and reporting them at the end. However,
it used 'break' instead of 'continue', causing the loop to exit on the
first device failure.
Fix this by replacing 'break' with 'continue'.
Fixes: 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle error better")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: jinbaohong <jinbaohong@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ec820fc28 ]
The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure
there are 8 slots for those newly registered clk_hw pointers, else
there is going to be out of bounds write when pointers 4..7 are set
into struct rs9_driver_data .clk_dif[4..7] field.
Since there are other structure members past this struct clk_hw
pointer array, writing to .clk_dif[4..7] fields corrupts both
the struct rs9_driver_data content and data around it, sometimes
without crashing the kernel. However, the kernel does surely
crash when the driver is unbound or during suspend.
Fix this, increase the struct clk_hw pointer array size to the
maximum output count of 9FGV0841, which is the biggest chip that
is supported by this driver.
Cc: stable@vger.kernel.org
Fixes: f0e5e18002 ("clk: rs9: Add support for 9FGV0841")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/CAMuHMdVyQpOBT+Ho+mXY07fndFN9bKJdaaWGn91WOFnnYErLyg@mail.gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0c99e08a ]
The implementation of __READ_ONCE() under CONFIG_LTO=y incorrectly
qualified the fallback "once" access for types larger than 8 bytes,
which are not atomic but should still happen "once" and suppress common
compiler optimizations.
The cast `volatile typeof(__x)` applied the volatile qualifier to the
pointer type itself rather than the pointee. This created a volatile
pointer to a non-volatile type, which violated __READ_ONCE() semantics.
Fix this by casting to `volatile typeof(*__x) *`.
With a defconfig + LTO + debug options build, we see the following
functions to be affected:
xen_manage_runstate_time (884 -> 944 bytes)
xen_steal_clock (248 -> 340 bytes)
^-- use __READ_ONCE() to load vcpu_runstate_info structs
Fixes: e35123d83e ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: stable@vger.kernel.org
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Tested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5338e365c ]
Commit 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when
enabling/disabling SR-IOV") tried to fix a race between the VF removal
inside sriov_del_vfs() and concurrent hot unplug by taking the PCI
rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock
was also taken in sriov_add_vfs() to protect addition of VFs.
This approach however causes deadlock on trying to remove PFs with SR-IOV
enabled because PFs disable SR-IOV during removal and this removal happens
under the PCI rescan/remove lock. So the original fix had to be reverted.
Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and
sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs
hotplug higher up in the callchain by taking the lock in
sriov_numvfs_store() before calling into the driver's sriov_configure()
callback.
Fixes: 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV")
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251216-revert_sriov_lock-v3-2-dac4925a7621@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fa119c0e5 ]
This reverts commit 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on.
Fixes: 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV")
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Acked-by: Gerd Bayer <gbayer@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251216-revert_sriov_lock-v3-1-dac4925a7621@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 480e1d5c64 ]
kexec_load_purgatory() derives image->start by locating e_entry inside an
SHF_EXECINSTR section. If the purgatory object contains multiple
executable sections with overlapping sh_addr, the entrypoint check can
match more than once and trigger a WARN.
Derive the entry section from the purgatory_start symbol when present and
compute image->start from its final placement. Keep the existing e_entry
fallback for purgatories that do not expose the symbol.
WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784
Call Trace:
<TASK>
bzImage64_load+0x133/0xa00
__do_sys_kexec_file_load+0x2b3/0x5c0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[me@linux.beauty: move helper to avoid forward declaration, per Baoquan]
Link: https://lkml.kernel.org/r/20260128043511.316860-1-me@linux.beauty
Link: https://lkml.kernel.org/r/20260120124005.148381-1-me@linux.beauty
Fixes: 8652d44f46 ("kexec: support purgatories with .text.hot sections")
Signed-off-by: Li Chen <me@linux.beauty>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Li Chen <me@linux.beauty>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ricardo Ribalda Delgado <ribalda@chromium.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5138c936c2 ]
commit c06c303832 ("ocfs2: fix xattr array entry __counted_by error")
doesn't handle all cases and the cleanup job for preserved xattr entries
still has bug:
- the 'last' pointer should be shifted by one unit after cleanup
an array entry.
- current code logic doesn't cleanup the first entry when xh_count is 1.
Note, commit c06c303832 is also a bug fix for 0fe9b66c65.
Link: https://lkml.kernel.org/r/20251210015725.8409-2-heming.zhao@suse.com
Fixes: 0fe9b66c65 ("ocfs2: Add preserve to reflink.")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 666183dcdd ]
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer.
Link: https://lkml.kernel.org/r/20260121013508.195836-1-lihaoxiang@isrc.iscas.ac.cn
Fixes: e6b585ca6e ("rapidio: move net allocation into core code")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94350fe6ca ]
This changes fixes following build error which is a miss from ef6e06b2ef
("highmem: fix kmap_to_page() for kmap_local_page() addresses").
mm/highmem.c:184:66: error: 'pteval' undeclared (first use in this
function); did you mean 'pte_val'?
184 | idx = arch_kmap_local_map_idx(i, pte_pfn(pteval));
In __kmap_to_page(), pteval is used but does not exist in the function.
(akpm: affects xtensa only)
Link: https://lkml.kernel.org/r/SJ0PR07MB86317E00EC0C59DA60935FDCD18DA@SJ0PR07MB8631.namprd07.prod.outlook.com
Fixes: ef6e06b2ef ("highmem: fix kmap_to_page() for kmap_local_page() addresses")
Signed-off-by: William Tambe <williamt@cadence.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4af7d194d ]
Macronix serial NAND devices with continuous read support do not
clear the configuration register on soft reset and lack a hardware
reset pin. When continuous read is interrupted (e.g., during reboot),
the feature remains enabled at the device level.
With continuous read enabled, the OOB area becomes inaccessible and
all reads are instead directed to the main area. As a result, during
partition allocation as part of MTD device registration, the first two
bytes of the main area for the master block are read and indicate that
the block is bad. This process repeats for every subsequent block for
the partition.
All reads and writes that reference the BBT find no good blocks and
fail.
The only paths for recovery from this state are triggering the
continuous read feature by way of raw MTD reads or through a NAND
device power drain.
Disable continuous read explicitly during spinand probe to ensure
quiescent feature state.
Fixes: 631cfdd052 ("mtd: spi-nand: Add continuous read support")
Cc: stable@vger.kernel.org
Signed-off-by: David LaPorte <dalaport@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b79b24f578 ]
The return value from itg3200_read_reg_s16() is stored in ret but
never checked. The function unconditionally returns IIO_VAL_INT,
ignoring potential I2C read failures. This causes garbage data to
be returned to userspace when the read fails, with no error reported.
Add proper error checking to propagate the failure to callers.
Fixes: 9dbf091da0 ("iio: gyro: Add itg3200")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33c1c6d8a2 ]
As kcalloc() may fail, check its return value to avoid a NULL pointer
dereference when passing it to of_property_read_u32_array().
Fixes: 790a1662d3 ("powerpc/smp: Parse ibm,thread-groups with multiple properties")
Cc: stable@vger.kernel.org
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250923133235.1862108-1-lgs201920130244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd025c1e87 ]
Remove duplication by consolidating these here. This reduces the
posibility of a parent driver missing them.
While we're at it, fix a bug in vdpa_sim where a valid ASID can be
assigned to a group equal to ngroups, causing an out of bound write.
Cc: stable@vger.kernel.org
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260119143306.1818855-2-eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a537c0da16 ]
A perf build failure was reported by Thomas Voegtle on stable kernel
v6.6.120:
CC tests/sample-parsing.o
CC util/intel-pt-decoder/intel-pt-pkt-decoder.o
CC util/perf-regs-arch/perf_regs_csky.o
CC util/arm-spe-decoder/arm-spe-pkt-decoder.o
CC util/perf-regs-arch/perf_regs_loongarch.o
In file included from util/arm-spe-decoder/arm-spe-pkt-decoder.h:10,
from util/arm-spe-decoder/arm-spe-pkt-decoder.c:14:
/local/git/linux-stable-rc/tools/include/linux/bitfield.h: In function ‘le16_encode_bits’:
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:166:31: error: implicit declaration of
function ‘cpu_to_le16’; did you mean ‘htole16’? [-Werror=implicit-function-declaration]
____MAKE_OP(le##size,u##size,cpu_to_le##size,le##size##_to_cpu) \
^~~~~~~~~
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:149:9: note: in definition of macro
‘____MAKE_OP’
return to((v & field_mask(field)) * field_multiplier(field)); \
^~
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:170:1: note: in expansion of macro
‘__MAKE_OP’
__MAKE_OP(16)
Fix this by including linux/kernel.h, which provides the required
definitions.
The issue was not found on the mainline due to the relevant C files have
included kernel.h. It'd be good to merge this change on mainline
as well for robustness.
Closes: https://lore.kernel.org/stable/3a44500b-d7c8-179f-61f6-e51cb50d3512@lio96.de/
Fixes: 64d86c03e1 ("perf arm-spe: Extend branch operations")
Reported-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
To: Sasha Levin <sashal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f3b950492 ]
If a process wrote to POR_EL0 and then crashed before a context switch
happened, the coredump would contain an incorrect value for POR_EL0.
The value read in poe_get() would be a stale value left in thread.por_el0. Fix
this by reading the value from the system register, if the target thread is the
current thread.
This matches what gcs/fpsimd do.
Fixes: 1751981992 ("arm64/ptrace: add support for FEAT_POE")
Reported-by: David Spickett <david.spickett@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 218b16992a ]
"pg_init_delay_msecs X" can be passed as a feature in the multipath
table and is used to set m->pg_init_delay_msecs in parse_features().
However, alloc_multipath_stage2(), which is called after
parse_features(), resets m->pg_init_delay_msecs to its default value.
Instead, set m->pg_init_delay_msecs in alloc_multipath(), which is
called before parse_features(), to avoid overwriting a value passed in
by the table.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52f527d091 ]
In fsl_mc_device_add(), device_initialize() is called first.
put_device() should be called to drop the reference if error
occurs. And other resources would be released via put_device
-> fsl_mc_device_release. So remove redundant kfree() in
error handling path.
Fixes: bbf9d17d98 ("staging: fsl-mc: Freescale Management Complex (fsl-mc) bus driver")
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/b767348e-d89c-416e-acea-1ebbff3bea20@stanley.mountain/
Signed-off-by: Su Hui <suhui@nfschina.com>
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260124102054.1613093-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 806ae939c4 ]
If a send bundle has picked a bunch of buffers, then it needs to send
all of those to be complete. This may require poll arming, if the send
buffer ends up being full. Once a send bundle has been poll armed, no
further bundles should be attempted.
This allows a current bundle to complete even though it needs to go
through polling to do so, but it will not allow another bundle to be
started once that has happened. Ideally we would abort a bundle if it
was only partially sent, but as some parts of it already went out on the
wire, this obviously isn't feasible. Not continuing more bundle attempts
post encountering a full socket buffer is the second best thing.
Cc: stable@vger.kernel.org
Fixes: a05d1f625c ("io_uring/net: support bundles for send")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1132e90840 ]
The COREPLL_PWRDN bit in the BLCG register must be set when the XUSB
device controller is powergated and cleared when it is unpowergated.
If this bit is not explicitly controlled, the core PLL may remain in an
incorrect power state across suspend/resume or ELPG transitions.
Therefore, update the driver to explicitly control this bit during
powergate transitions.
Fixes: 49db427232 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://patch.msgid.link/20260123173121.4093902-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5747435e0f ]
When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during
vmalloc cleanup triggers expensive stack unwinding that acquires RCU read
locks. Processing a large purge_list without rescheduling can cause the
task to hold CPU for extended periods (10+ seconds), leading to RCU stalls
and potential OOM conditions.
The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node()
where iterating through hundreds or thousands of vmap_area entries and
freeing their associated shadow pages causes:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l
...
task:kworker/0:17 state:R running task stack:28840 pid:6229
...
kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299
purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299
Each call to kasan_release_vmalloc() can free many pages, and with
page_owner tracking, each free triggers save_stack() which performs stack
unwinding under RCU read lock. Without yielding, this creates an
unbounded RCU critical section.
Add periodic cond_resched() calls within the loop to allow:
- RCU grace periods to complete
- Other tasks to run
- Scheduler to preempt when needed
The fix uses need_resched() for immediate response under load, with a
batch count of 32 as a guaranteed upper bound to prevent worst-case stalls
even under light load.
Link: https://lkml.kernel.org/r/20260112103612.627247-1-kartikey406@gmail.com
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: syzbot+d8d4c31d40f868eaea30@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d8d4c31d40f868eaea30
Link: https://lore.kernel.org/all/20260112084723.622910-1-kartikey406@gmail.com/T/ [v1]
Suggested-by: Uladzislau Rezki <urezki@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5489d0433 ]
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>", the physical range that contains the carried
over IMA measurement list may fall outside the truncated RAM leading to a
kernel panic.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) – not-present page
Other architectures already validate the range with page_is_ram(), as done
in commit cbf9c4b961 ("of: check previous kernel's ima-kexec-buffer
against memory bounds") do a similar check on x86.
Without carrying the measurement list across kexec, the attestation
would fail.
Link: https://lkml.kernel.org/r/20251231061609.907170-4-harshit.m.mogalapalli@oracle.com
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Fixes: b69a2afd5a ("x86/kexec: Carry forward IMA measurement log on kexec")
Reported-by: Paul Webb <paul.x.webb@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: guoweikang <guoweikang.kernel@gmail.com>
Cc: Henry Willard <henry.willard@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Jonathan McDowell <noodles@fb.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Yifei Liu <yifei.l.liu@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f397bc0781 ]
If nvmem_add_one_cell() failed, the ownership of "child" (or "info.np"),
thus its OF reference, is not passed further and function should clean
up by putting the reference it got via earlier of_node_get(). Note that
this is independent of references obtained via for_each_child_of_node()
loop.
Fixes: 50014d6596 ("nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260116170846.733558-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 404d779466 ]
idmap lookups can time out while the cache is waiting for a userspace
upcall reply. In that case cache_check() returns -ETIMEDOUT to callers.
The nfsd_map_name_to_[ug]id functions currently proceed with attempting
to map the id to a kuid despite a potentially temporary failure to
perform the idmap lookup. This results in the code returning the error
NFSERR_BADOWNER which can cause client operations to return to userspace
with failure.
Fix this by returning the failure status before attempting kuid mapping.
This will return NFSERR_JUKEBOX on idmap lookup timeout so that clients
can retry the operation instead of aborting it.
Fixes: 65e10f6d0a ("nfsd: Convert idmap to use kuids and kgids")
Cc: stable@vger.kernel.org
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46ef85f854 ]
A General Protection Fault occurs in write_page() during array resize:
RIP: 0010:write_page+0x22b/0x3c0 [md_mod]
This is a use-after-free race between bitmap_daemon_work() and
__bitmap_resize(). The daemon iterates over `bitmap->storage.filemap`
without locking, while the resize path frees that storage via
md_bitmap_file_unmap(). `quiesce()` does not stop the md thread,
allowing concurrent access to freed pages.
Fix by holding `mddev->bitmap_info.mutex` during the bitmap update.
Link: https://lore.kernel.org/linux-raid/20260120102456.25169-1-jinpu.wang@ionos.com
Closes: https://lore.kernel.org/linux-raid/CAMGffE=Mbfp=7xD_hYxXk1PAaCZNSEAVeQGKGy7YF9f2S4=NEA@mail.gmail.com/T/#u
Cc: stable@vger.kernel.org
Fixes: d60b479d17 ("md/bitmap: add bitmap_resize function to allow bitmap resizing.")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55e03b8cbe ]
The free space and inode btree repair functions will rebuild both btrees
at the same time, after which it needs to evaluate both btrees to
confirm that the corruptions are gone.
However, Jiaming Zhang ran syzbot and produced a crash in the second
xchk_allocbt call. His root-cause analysis is as follows (with minor
corrections):
In xrep_revalidate_allocbt(), xchk_allocbt() is called twice (first
for BNOBT, second for CNTBT). The cause of this issue is that the
first call nullified the cursor required by the second call.
Let's first enter xrep_revalidate_allocbt() via following call chain:
xfs_file_ioctl() ->
xfs_ioc_scrubv_metadata() ->
xfs_scrub_metadata() ->
`sc->ops->repair_eval(sc)` ->
xrep_revalidate_allocbt()
xchk_allocbt() is called twice in this function. In the first call:
/* Note that sc->sm->sm_type is XFS_SCRUB_TYPE_BNOPT now */
xchk_allocbt() ->
xchk_btree() ->
`bs->scrub_rec(bs, recp)` ->
xchk_allocbt_rec() ->
xchk_allocbt_xref() ->
xchk_allocbt_xref_other()
since sm_type is XFS_SCRUB_TYPE_BNOBT, pur is set to &sc->sa.cnt_cur.
Kernel called xfs_alloc_get_rec() and returned -EFSCORRUPTED. Call
chain:
xfs_alloc_get_rec() ->
xfs_btree_get_rec() ->
xfs_btree_check_block() ->
(XFS_IS_CORRUPT || XFS_TEST_ERROR), the former is false and the latter
is true, return -EFSCORRUPTED. This should be caused by
ioctl$XFS_IOC_ERROR_INJECTION I guess.
Back to xchk_allocbt_xref_other(), after receiving -EFSCORRUPTED from
xfs_alloc_get_rec(), kernel called xchk_should_check_xref(). In this
function, *curpp (points to sc->sa.cnt_cur) is nullified.
Back to xrep_revalidate_allocbt(), since sc->sa.cnt_cur has been
nullified, it then triggered null-ptr-deref via xchk_allocbt() (second
call) -> xchk_btree().
So. The bnobt revalidation failed on a cross-reference attempt, so we
deleted the cntbt cursor, and then crashed when we tried to revalidate
the cntbt. Therefore, check for a null cntbt cursor before that
revalidation, and mark the repair incomplete. Also we can ignore the
second tree entirely if the first tree was rebuilt but is already
corrupt.
Apply the same fix to xrep_revalidate_iallocbt because it has the same
problem.
Cc: r772577952@gmail.com
Link: https://lore.kernel.org/linux-xfs/CANypQFYU5rRPkTy=iG5m1Lp4RWasSgrHXAh3p8YJojxV0X15dQ@mail.gmail.com/T/#m520c7835fad637eccf843c7936c200589427cc7e
Cc: <stable@vger.kernel.org> # v6.8
Fixes: dbfbf3bdf6 ("xfs: repair inode btrees")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jiaming Zhang <r772577952@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca27313fb3 ]
Fix this function to return NULL instead of a mangled ENOMEM, then fix
the callers to actually check for a null pointer and return ENOMEM.
Most of the corrections here are for code merged between 6.2 and 6.10.
Cc: r772577952@gmail.com
Cc: <stable@vger.kernel.org> # v6.12
Fixes: 1a5f6e08d4 ("xfs: create subordinate scrub contexts for xchk_metadata_inode_subtype")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jiaming Zhang <r772577952@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba408d299a ]
Only call the xfarray and xfblob destructor if we have a valid pointer,
and be sure to null out that pointer afterwards. Note that this patch
fixes a large number of commits, most of which were merged between 6.9
and 6.10.
Cc: r772577952@gmail.com
Cc: <stable@vger.kernel.org> # v6.12
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jiaming Zhang <r772577952@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc32c5725f ]
Intel pinctrl drivers support large set of platforms and the IPs are
often reused by their different variants, but it's currently not possible
to figure out the exact driver that supports specific variant. Add user
friendly documentation for them.
Cc: stable@vger.kernel.org
Reported-by: Guido Trentalancia <guido@trentalancia.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220056
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guido Trentalancia <guido@trentalancia.com>
[andy: added Oxford comma]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8754dd7639 ]
struct configfs_item_operations callbacks are defined like the following:
int (*allow_link)(struct config_item *src, struct config_item *target);
void (*drop_link)(struct config_item *src, struct config_item *target);
While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify
the parameters in the correct order, pci_primary_epc_epf_unlink() and
pci_secondary_epc_epf_unlink() specify the parameters in the wrong order,
leading to the below kernel crash when using the unlink command in
configfs:
Unable to handle kernel paging request at virtual address 0000000300000857
Mem abort info:
...
pc : string+0x54/0x14c
lr : vsnprintf+0x280/0x6e8
...
string+0x54/0x14c
vsnprintf+0x280/0x6e8
vprintk_default+0x38/0x4c
vprintk+0xc4/0xe0
pci_epf_unbind+0xdc/0x108
configfs_unlink+0xe0/0x208+0x44/0x74
vfs_unlink+0x120/0x29c
__arm64_sys_unlinkat+0x3c/0x90
invoke_syscall+0x48/0x134
do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0
Fixes: e85a2d7837 ("PCI: endpoint: Add support in configfs to associate two EPCs with EPF")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260108062747.1870669-1-mmaddireddy@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd3138e891 ]
In debugging other problems with generic/753, it turns out that it's
possible for the system go to down in the middle of a remote xattr set
operation such that the leaf block entry is marked incomplete and
valueblk is set to zero. Make this no longer a failure.
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 13791d3b83 ("xfs: scrub extended attribute leaf space")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fed827044 ]
In the previous patches, we observed that it's possible for there to be
freemap entries with zero size but a nonzero base. This isn't an
inconsistency per se, but older kernels can get confused by this and
corrupt the block, leading to corruption.
If we see this, flag the xattr structure for optimization so that it
gets rebuilt.
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 13791d3b83 ("xfs: scrub extended attribute leaf space")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eefc0c2b7 ]
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0.
Cc: <stable@vger.kernel.org> # v2.6.12
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f13c1d2a6 ]
Back in commit 2a2b5932db ("xfs: fix attr leaf header freemap.size
underflow"), Brian Foster observed that it's possible for a small
freemap at the end of the end of the xattr entries array to experience
a size underflow when subtracting the space consumed by an expansion of
the entries array. There are only three freemap entries, which means
that it is not a complete index of all free space in the leaf block.
This code can leave behind a zero-length freemap entry with a nonzero
base. Subsequent setxattr operations can increase the base up to the
point that it overlaps with another freemap entry. This isn't in and of
itself a problem because the code in _leaf_add that finds free space
ignores any freemap entry with zero size.
However, there's another bug in the freemap update code in _leaf_add,
which is that it fails to update a freemap entry that begins midway
through the xattr entry that was just appended to the array. That can
result in the freemap containing two entries with the same base but
different sizes (0 for the "pushed-up" entry, nonzero for the entry
that's actually tracking free space). A subsequent _leaf_add can then
allocate xattr namevalue entries on top of the entries array, leading to
data loss. But fixing that is for later.
For now, eliminate the possibility of confusion by zeroing out the base
of any freemap entry that has zero size. Because the freemap is not
intended to be a complete index of free space, a subsequent failure to
find any free space for a new xattr will trigger block compaction, which
regenerates the freemap.
It looks like this bug has been in the codebase for quite a long time.
Cc: <stable@vger.kernel.org> # v2.6.12
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1b1401522 ]
The interrupt handler reads FIFO entries in batches of N samples, where N
is the number of scan elements that have been enabled. However, the sensor
fills the FIFO one sample at a time, even when more than one channel is
enabled. Therefore,the number of entries reported by the FIFO status
registers may not be a multiple of N; if this number is not a multiple, the
number of entries read from the FIFO may exceed the number of entries
actually present.
To fix the above issue, round down the number of FIFO entries read from the
status registers so that it is always a multiple of N.
Fixes: df36de1367 ("iio: accel: add ADXL380 driver")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24804ba508 ]
Since commit c6e126de43 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: c6e126de43 ("of: Keep track of populated platform devices")
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251219110714.23919-1-johan@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27a8acea47 ]
Since commit c6e126de43 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: c6e126de43 ("of: Keep track of populated platform devices")
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20251219110947.24101-1-johan@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20117c92bc ]
Manipulating a list in the kernel isn't safe without some sort of
mutual exclusion. Add a mutex any time we access / modify
'mfd_of_node_list' to prevent possible crashes.
Cc: stable@vger.kernel.org
Fixes: 466a62d764 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251210113002.1.I6ceaca2cfb7eb25737012b166671f516696be4fd@changeid
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10e60d8781 ]
Commit 4fc82cd907 ("iommu/vt-d: Don't issue ATS Invalidation
request when device is disconnected") relies on
pci_dev_is_disconnected() to skip ATS invalidation for
safely-removed devices, but it does not cover link-down caused
by faults, which can still hard-lock the system.
For example, if a VM fails to connect to the PCIe device,
"virsh destroy" is executed to release resources and isolate
the fault, but a hard-lockup occurs while releasing the group fd.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
intel_pasid_tear_down_entry
device_block_translation
blocking_domain_attach_dev
__iommu_attach_device
__iommu_device_set_domain
__iommu_group_set_domain_internal
iommu_detach_group
vfio_iommu_type1_detach_group
vfio_group_detach_container
vfio_group_fops_release
__fput
Although pci_device_is_present() is slower than
pci_dev_is_disconnected(), it still takes only ~70 µs on a
ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed
and width increase.
Besides, devtlb_invalidation_with_pasid() is called only in the
paths below, which are far less frequent than memory map/unmap.
1. mm-struct release
2. {attach,release}_dev
3. set/remove PASID
4. dirty-tracking setup
The gain in system stability far outweighs the negligible cost
of using pci_device_is_present() instead of pci_dev_is_disconnected()
to decide when to skip ATS invalidation, especially under GDR
high-load conditions.
Fixes: 4fc82cd907 ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected")
Cc: stable@vger.kernel.org
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Link: https://lore.kernel.org/r/20251211035946.2071-3-guojinhui.liam@bytedance.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a505ca2db8 ]
Each tile info is composed of: row_sb, col_sb, start_pos
and end_pos (4 bytes each). So the total required memory
is AV1_MAX_TILES * 16 bytes.
Use the correct #define to allocate the buffer and avoid
writing tile info in non-allocated memory.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: 727a400686 ("media: verisilicon: Add Rockchip AV1 decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
