[ Upstream commit fb7bfa31b8 ]
The good revisions are tied to exact steppings, meaning it's not valid to
match on model number alone, let alone a range.
This is probably only a latent issue. From public microcode archives, the
following CPUs exist 17-30-00, 17-60-00, 17-70-00 and would be captured by the
model ranges. They're likely pre-production steppings, and likely didn't get
Zenbleed microcode, but it's still incorrect to compare them to a different
steppings revision.
Either way, convert the logic to use x86_match_min_microcode_rev(), which is
the preferred mechanism.
Fixes: 522b1d6921 ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: x86@kernel.org
Link: https://patch.msgid.link/20251126130352.880424-1-andrew.cooper3@citrix.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 442ae40660 ]
io_register_pbuf_ring() ignores the return value of io_buffer_add_list(),
which can fail if xa_store() returns an error (e.g., -ENOMEM). When this
happens, the function returns 0 (success) to the caller, but the
io_buffer_list structure is neither added to the xarray nor freed.
In practice this requires failure injection to hit, hence not a real
issue. But it should get fixed up none the less.
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f65c75b0b9 ]
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues.
Fixes: e5dcf0025d ("s390/css: move subchannel lock allocation")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c9ecd8e64 ]
dev_pm_clear_wake_irq() currently uses a dangerous pattern where
dev->power.wakeirq is read and checked for NULL outside the lock.
If two callers invoke this function concurrently, both might see
a valid pointer and proceed. This could result in a double-free
when the second caller acquires the lock and tries to release the
same object.
Address this by removing the lockless check of dev->power.wakeirq.
Instead, acquire dev->power.lock immediately to ensure the check and
the subsequent operations are atomic. If dev->power.wakeirq is NULL
under the lock, simply unlock and return. This guarantees that
concurrent calls cannot race to free the same object.
Based on a quick scan of current users, I did not find an actual bug as
drivers seem to rely on their own synchronization. However, since
asynchronous usage patterns exist (e.g., in
drivers/net/wireless/ti/wlcore), I believe a race is theoretically
possible if the API is used less carefully in the future. This change
hardens the API to be robust against such cases.
Fixes: 4990d4fe32 ("PM / Wakeirq: Add automated device wake IRQ handling")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260203031943.1924-1-hanguidong02@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fedbb5894 ]
According to the description in the intel_pstate.rst documentation,
Capacity-Aware Scheduling and Energy-Aware Scheduling are only
supported on a hybrid processor without SMT. Previously, the system
used sched_smt_active() for judgment, which is not a strict condition
because users can switch it on or off via /sys at any time.
This could lead to incorrect driver settings in certain scenarios.
For example, on a CPU that supports SMT, a user can disable SMT
via the nosmt parameter to enable asym capacity, and then re-enable
SMT via /sys. In such cases, some settings in the driver would no
longer be correct.
To address this issue, replace sched_smt_active() with cpu_smt_possible(),
and only enable asym capacity when CPU SMT is not possible.
Fixes: 929ebc93cc ("cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260203024852.301066-1-tianyaxiong@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 283182c1c2 ]
When arm_spe_pmu_next_off() fails to calculate a valid limit, it returns
zero to indicate that tracing should not start. However, the caller
arm_spe_perf_aux_output_begin() does not propagate this failure by
updating hwc->state, cause the error to be silently ignored by upper
layers.
Because hwc->state remains zero after a failure, arm_spe_pmu_start()
continues to programs filter registers unnecessarily. The driver
still reports success to the perf core, so the core assumes the SPE
event was enabled and proceeds to enable other events. This breaks
event group semantics: SPE is already stopped while other events in the
same group are enabled.
Fix this by updating arm_spe_perf_aux_output_begin() to return a status
code indicating success (0) or failure (-EIO). Both the interrupt
handler and arm_spe_pmu_start() check the return value and call
arm_spe_pmu_stop() to set PERF_HES_STOPPED in hwc->state.
In the interrupt handler, the period (e.g., period_left) needs to be
updated, so PERF_EF_UPDATE is passed to arm_spe_pmu_stop(). When the
error occurs during event start, the trace unit is not yet enabled, so
a flag '0' is used to drain buffer and update state only.
Fixes: d5d9696b03 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53c998527f ]
alloc_gcs() returns an error-encoded pointer on failure, which comes
from do_mmap(), not NULL.
The current NULL check fails to detect errors, which could lead to using
an invalid GCS address.
Use IS_ERR_VALUE() to properly detect errors, consistent with the
check in gcs_alloc_thread_stack().
Fixes: b57180c75c ("arm64/gcs: Implement shadow stack prctl() interface")
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75ce02f4bc ]
In the case of an empty wakeup_sources list, wakeup_sources_walk_start()
will return an invalid but non-NULL address. This also affects wrappers
of the aforementioned function, like for_each_wakeup_source().
Update wakeup_sources_walk_start() to return NULL in case of an empty
list.
Fixes: b4941adb24 ("PM: wakeup: Add routine to help fetch wakeup source object.")
Signed-off-by: Samuel Wu <wusamuel@google.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260124012133.2451708-2-wusamuel@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6abc7d5dcf ]
raid1_run() calls setup_conf() which registers a thread via
md_register_thread(). If raid1_set_limits() fails, the previously
registered thread is not unregistered, resulting in a memory leak
of the md_thread structure and the thread resource itself.
Add md_unregister_thread() to the error path to properly cleanup
the thread, which aligns with the error handling logic of other paths
in this function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Link: https://lore.kernel.org/linux-raid/20260126071533.606263-1-zilin@seu.edu.cn
Fixes: 97894f7d3c ("md/raid1: use the atomic queue limit update APIs")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0949c646d6 ]
This partially reverts commit 87af633689 so
the current memory target for PV guests is still fetched from
start_info->nr_pages, which matches exactly what the toolstack sets the
initial memory target to.
Using get_num_physpages() is possible on PV also, but needs adjusting to
take into account the ISA hole and the PFN at 0 not considered usable
memory despite being populated, and hence would need extra adjustments.
Instead of carrying those extra adjustments switch back to the previous
code. That leaves Linux with a difference in how current memory target is
obtained for HVM vs PV, but that's better than adding extra logic just for
PV.
However if switching to start_info->nr_pages for PV domains we need to
differentiate between released pages (freed back to the hypervisor) as
opposed to pages in the physmap which are not populated to start with.
Introduce a new xen_unpopulated_pages to account for papges that have
never been populated, and hence in the PV case don't need subtracting.
Fixes: 87af633689 ("x86/xen: fix balloon target initialization for PVH dom0")
Reported-by: James Dingwall <james@dingwall.me.uk>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260128110510.46425-2-roger.pau@citrix.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da7e4b75e5 ]
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad5f2e2908 ]
Commit 1ceeedb597 ("ublk: optimize UBLK_IO_UNREGISTER_IO_BUF on daemon
task") optimized ublk request buffer unregistration to use a non-atomic
reference count decrement when performed on the ublk_io's daemon task.
The optimization applied to auto buffer unregistration, which happens as
part of handling UBLK_IO_COMMIT_AND_FETCH_REQ on the daemon task.
However, commit b749965edd ("ublk: remove ublk_commit_and_fetch()")
reordered the ublk_sub_req_ref() for the completed request before the
io_buffer_unregister_bvec() call. As a result, task_registered_buffers
is already 0 when io_buffer_unregister_bvec() calls ublk_io_release()
and the non-atomic refcount optimization doesn't apply.
Move the io_buffer_unregister_bvec() call back to before
ublk_need_complete_req() to restore the reference counting optimization.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: b749965edd ("ublk: remove ublk_commit_and_fetch()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1fe789a96 ]
In thermal_of_cm_lookup(), tr_np is obtained via of_parse_phandle(), but
never released.
Use the __free(device_node) cleanup attribute to automatically release
the node and fix the leak.
Fixes: 423de5b5bc ("thermal/of: Fix cdev lookup in thermal_of_should_bind()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260124-thermal_of-v1-1-54d3416948cf@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ad357e39b ]
The "if (dio->error)" in iomap_dio_bio_iter exists to stop submitting
more bios when a completion already return an error. Commit cfe057f7db
("iomap_dio_actor(): fix iov_iter bugs") made it revert the iov by
"copied", which is very wrong given that we've already consumed that
range and submitted a bio for it.
Fixes: cfe057f7db ("iomap_dio_actor(): fix iov_iter bugs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b7fbf9333 ]
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In scmi_cpu_domain_id(), it does not release the reference.
Fixes: e336baa419 ("cpufreq: scmi: Prepare to move OF parsing of domain-id to cpufreq")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b7277e02d ]
Commit 073d3d2ca7 ("OPP: Level zero is valid") modified the
documentation for this function to indicate that errors should return a
non-zero value to avoid colliding with the OPP level zero, however
forgot to actually update the return.
No in-tree kernel code depends on the error value being 0.
Fixes: 073d3d2ca7 ("OPP: Level zero is valid")
Signed-off-by: Aleks Todorov <aleksbgbg@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d119bd2e16 ]
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations.
Link: https://lore.kernel.org/linux-raid/20260123182623.3718551-3-yukuai@fnnas.com
Fixes: 5ab829f197 ("md/md-llbitmap: introduce new lockless bitmap")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd1635d844 ]
When llbitmap bit state is still unwritten, any new write should force
rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying().
However, later the same check is missing in need_this_block(), causing
stripe to deadloop during handling because handle_stripe() will decide
to go to handle_stripe_fill(), meanwhile need_this_block() always return
0 and nothing is handled.
Link: https://lore.kernel.org/linux-raid/20260123182623.3718551-2-yukuai@fnnas.com
Fixes: 5ab829f197 ("md/md-llbitmap: introduce new lockless bitmap")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99582edb3f ]
In raid10_sync_request(), 'any_working' indicates if any IO will
be submitted. When there's only one In_sync disk with badblocks,
'any_working' might be set to 1 but no IO is submitted. Fix it by
setting 'any_working' after badblock checks.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-11-linan666@huaweicloud.com
Fixes: e875ecea26 ("md/raid10 record bad blocks as needed during recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d9f7150ac ]
Since commit f63f17350e ("md/raid5: use the atomic queue limit
update APIs"), the abort path in raid5_run() returns 'ret' instead of
-EIO. However, if log_init() fails, 'ret' is still 0 from the previous
successful call, causing raid5_run() to return success despite the
failure.
Fix this by capturing the return value from log_init().
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-2-yukuai@fnnas.com
Fixes: f63f17350e ("md/raid5: use the atomic queue limit update APIs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601130531.LGfcZsa4-lkp@intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9635c586a5 ]
After commit be0a3600aa ("thermal: sysfs: Rework the handling of trip
point updates"), THERMAL_TEMP_INVALID can be passed to sys_set_trip_temp()
and it is treated as a regular temperature value there, so the sysfs
write fails even though it is expected to succeed and disable the given
trip point.
Address this by making sys_set_trip_temp() clear its temp variable when
it is equal to THERMAL_TEMP_INVALID.
Fixes: be0a3600aa ("thermal: sysfs: Rework the handling of trip point updates")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2815400.mvXUDI8C0e@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80606f4eb8 ]
After commit 5484e31bbb ("cpuidle: menu: Skip tick_nohz_get_sleep_length()
call in some cases"), if the return value of get_typical_interval()
multiplied by NSEC_PER_USEC is not greater than RESIDENCY_THRESHOLD_NS,
the menu governor will skip computing the time till the closest timer.
If that happens when the tick has been stopped already, the selected
idle state may be too deep due to the subsequent check comparing
predicted_ns with TICK_NSEC and causing its value to be replaced with
the expected time till the closest timer, which is KTIME_MAX in that
case. That will cause the deepest enabled idle state to be selected,
but the time till the closest timer very well may be shorter than the
target residency of that state, in which case a shallower state should
be used.
Address this by making menu_select() always compute the time till the
closest timer when the tick has been stopped.
Also move the predicted_ns check mentioned above into the branch in
which the time till the closest timer is determined because it only
needs to be done in that case.
Fixes: 5484e31bbb ("cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5959091.DvuYhMxLoT@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 649dd18f55 ]
Check if the passed in offset is negative once cast to sync->off. This
ensures that -EINVAL is returned for that case, like it would be for
sync_file_range(2).
Fixes: c992fe2925 ("io_uring: add fsync support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07f3c3a1cd ]
A previous commit got rid of any use of this member, but forgot to
remove it. Kill it.
Fixes: f4bb2f65bb ("io_uring/eventfd: move ctx->evfd_last_cq_tail into io_ev_fd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f851e03bce ]
Cover a missed execution path with a new check.
Fixes: 0acf24ad7e ("ACPICA: Add support for PCC Opregion special context data")
Link: f421dd9dd8
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3030574.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a8737e113 ]
io_uring_enter(), __io_msg_ring_data(), and io_msg_send_fd() read
ctx->flags and ctx->submitter_task without holding the ctx's uring_lock.
This means they may race with the assignment to ctx->submitter_task and
the clearing of IORING_SETUP_R_DISABLED from ctx->flags in
io_register_enable_rings(). Ensure the correct ordering of the
ctx->flags and ctx->submitter_task memory accesses by storing to
ctx->flags using release ordering and loading it using acquire ordering.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 4add705e4e ("io_uring: remove io_register_submitter")
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc8ea87143 ]
Dom0 inherit devices from the machine and is usually in PV mode.
If we are running in a virtual that has virtio devices, these devices
would be considered as using grants with Dom0 as backend, while being
the said Dom0 itself, while we want to use these devices like regular
PCI devices.
Fix this by preventing grant-dma-ops from being used when running as Dom0
(initial domain). We still keep the device-tree logic as-is.
Signed-off-by: Teddy Astie <teddy.astie@vates.tech>
Fixes: 61367688f1 ("xen/virtio: enable grant based virtio on x86")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <6698564dd2270a9f7377b78ebfb20cb425cabbe8.1767720955.git.teddy.astie@vates.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0089ce1c05 ]
Commit 7a8c994cbb ("ACPI: processor: idle: Optimize ACPI idle
driver registration") moved the ACPI idle driver registration to
acpi_processor_driver_init() and acpi_processor_power_init() does
not register an idle driver any more.
Accordingly, the cpuidle driver check in __acpi_processor_start() needs
to be updated to avoid calling acpi_processor_power_init() without a
cpuidle driver, in which case the registration of the cpuidle device
in that function would lead to a NULL pointer dereference in
__cpuidle_register_device().
Fixes: 7a8c994cbb ("ACPI: processor: idle: Optimize ACPI idle driver registration")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-4-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ac9690d4b ]
On rnbd-srv, the bi_size of the bio is set during the bio_add_page
function, to which datalen is passed. But for special IOs like DISCARD
and WRITE_ZEROES, datalen is 0, since there is no data to write. For
these special IOs, use the bi_size of the rnbd_msg_io.
Fixes: f6f84be089 ("block/rnbd-srv: Add sanity check and remove redundant assignment")
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5ca32d031 ]
This change fixes the instance of double incrementing of
retry_count. The increment of this count already happens
when netfs_reissue_write gets called. Incrementing this
value before is not necessary.
Fixes: 4acb665cf4 ("netfs: Work around recursion by abandoning retry if nothing read")
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebbbc4bfad ]
Zero out @err_iov and @err_buftype before retrying SMB2_open() to
prevent an UAF bug if @data != NULL, otherwise a double free.
Fixes: e3a4363302 ("smb/client: fix memory leak in smb2_open_file()")
Reported-by: David Howells <dhowells@redhat.com>
Closes: https://lore.kernel.org/r/2892312.1770306653@warthog.procyon.org.uk
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c134a40f86 ]
Compressed folios for ztailpacking pclusters must be valid before adding
these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster()
may assume they are already valid and then trigger a NULL pointer
dereference.
It is somewhat hard to reproduce because the inline data is in the same
block as the tail of the compressed indexes, which are usually read just
before. However, it may still happen if a fatal signal arrives while
read_mapping_folio() is running, as shown below:
erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : z_erofs_decompress_queue+0x4c8/0xa14
lr : z_erofs_decompress_queue+0x160/0xa14
sp : ffffffc08b3eb3a0
x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000
x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001
x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700
x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098
x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004
x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9
x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
z_erofs_decompress_queue+0x4c8/0xa14
z_erofs_runqueue+0x908/0x97c
z_erofs_read_folio+0x128/0x228
filemap_read_folio+0x68/0x128
filemap_get_pages+0x44c/0x8b4
filemap_read+0x12c/0x5b8
generic_file_read_iter+0x4c/0x15c
do_iter_readv_writev+0x188/0x1e0
vfs_iter_read+0xac/0x1a4
backing_file_read_iter+0x170/0x34c
ovl_read_iter+0xf0/0x140
vfs_read+0x28c/0x344
ksys_read+0x80/0xf0
__arm64_sys_read+0x24/0x34
invoke_syscall+0x60/0x114
el0_svc_common+0x88/0xe4
do_el0_svc+0x24/0x30
el0_svc+0x40/0xa8
el0t_64_sync_handler+0x70/0xbc
el0t_64_sync+0x1bc/0x1c0
Fix this by reading the inline data before allocating and adding
the pclusters to the I/O chains.
Fixes: cecf864d3d ("erofs: support inline data decompression")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-and-tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b14c5e04bd ]
I have been observing a number of systems aborting at
insert_dev_extents() in btrfs_create_pending_block_groups(). The
following is a sample stack trace of such an abort coming from forced
chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this
can theoretically happen to any DUP chunk allocation.
[81.801] ------------[ cut here ]------------
[81.801] BTRFS: Transaction aborted (error -17)
[81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319
[81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk
[81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE
[81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs]
[81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282
[81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000
[81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0
[81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007
[81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000
[81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000
[81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000
[81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0
[81.810] Call Trace:
[81.810] <TASK>
[81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs]
[81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs]
[81.811] kernfs_fop_write_iter+0x15f/0x240
[81.812] vfs_write+0x264/0x500
[81.812] ksys_write+0x6c/0xe0
[81.812] do_syscall_64+0x66/0x770
[81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[81.813] RIP: 0033:0x7fec6be66197
[81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197
[81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001
[81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000
[81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002
[81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0
[81.817] </TASK>
[81.817] irq event stamp: 20039
[81.818] hardirqs last enabled at (20047): [<ffffffff99a68302>] __up_console_sem+0x52/0x60
[81.818] hardirqs last disabled at (20056): [<ffffffff99a682e7>] __up_console_sem+0x37/0x60
[81.819] softirqs last enabled at (19470): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0
[81.819] softirqs last disabled at (19463): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0
[81.820] ---[ end trace 0000000000000000 ]---
[81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists
Inspecting these aborts with drgn, I observed a pattern of overlapping
chunk_maps. Note how stripe 1 of the first chunk overlaps in physical
address with stripe 0 of the second chunk.
Physical Start Physical End Length Logical Type Stripe
----------------------------------------------------------------------------------------------------
0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2
0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2
Now how could this possibly happen? All chunk allocation is protected by
the chunk_mutex so racing allocations should see a consistent view of
the CHUNK_ALLOCATED bit in the chunk allocation extent-io-tree
(device->alloc_state as set by chunk_map_device_set_bits()) The tree
itself is protected by a spin lock, and clearing/setting the bits is
always protected by fs_info->mapping_tree_lock, so no race is apparent.
It turns out that there is a subtle bug in the logic regarding chunk
allocations that have happened in the current transaction, known as
"pending extents". The chunk allocation as defined in
find_free_dev_extent() is a loop which searches the commit root of the
dev_root and looks for gaps between DEV_EXTENT items. For those gaps, it
then checks alloc_state bitmap for any pending extents and adjusts the
hole that it finds accordingly. However, the logic in that adjustment
assumes that the first pending extent is the only one in that range.
e.g., given a layout with two non-consecutive pending extents in a hole
passed to dev_extent_hole_check() via *hole_start and *hole_size:
|----pending A----| real hole |----pending B----|
| candidate hole |
*hole_start *hole_start + *hole_size
the code incorrectly returns a "hole" from the end of pending extent A
until the passed in hole end, failing to account for pending B.
However, it is not entirely obvious that it is actually possible to
produce such a layout. I was able to reproduce it, but with some
contortions: I continued to use the force chunk allocation sysfs file
and I introduced a long delay (10 seconds) into the start of the cleaner
thread. I also prevented the unused bgs cleaning logic from ever
deleting metadata bgs. These help make it easier to deterministically
produce the condition but shouldn't really matter if you imagine the
conditions happening by race/luck. Allocations/frees can happen
concurrently with the cleaner thread preparing to process an unused
extent and both create some used chunks with an unused chunk
interleaved, all during one transaction. Then btrfs_delete_unused_bgs()
sees the unused one and clears it, leaving a range with several pending
chunk allocations and a gap in the middle.
The basic idea is that the unused_bgs cleanup work happens on a worker
so if we allocate 3 block groups in one transaction, then the cleaner
work kicked off by the previous transaction comes through and deletes
the middle one of the 3, then the commit root shows no dev extents and
we have the bad pattern in the extent-io-tree. One final consideration
is that the code happens to loop to the next hole if there are no more
extents at all, so we need one more dev extent way past the area we are
working in. Something like the following demonstrates the technique:
# push the BG frontier out to 20G
fallocate -l 20G $mnt/foo
# allocate one more that will prevent the "no more dev extents" luck
fallocate -l 1G $mnt/sticky
# sync
sync
# clear out the allocation area
rm $mnt/foo
sync
_cleaner
# let everything quiesce
sleep 20
sync
# dev tree should have one bg 20G out and the rest at the beginning..
# sort of like an empty FS but with a random sticky chunk.
# kick off the cleaner in the background, remember it will sleep 10s
# before doing interesting work
_cleaner &
sleep 3
# create 3 trivial block groups, all empty, all immediately marked as unused.
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
echo 1 > "$(_btrfs_sysfs_space_info $dev data)/force_chunk_alloc"
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
# let the cleaner thread definitely finish, it will remove the data bg
sleep 10
# this allocation sees the non-consecutive pending metadata chunks with
# data chunk gap of 1G and allocates a 2G extent in that hole. ENOSPC!
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
As for the fix, it is not that obvious. I could not see a trivial way to
do it even by adding backup loops into find_free_dev_extent(), so I
opted to change the semantics of dev_extent_hole_check() to not stop
looping until it finds a sufficiently big hole. For clarity, this also
required changing the helper function contains_pending_extent() into two
new helpers which find the first pending extent and the first suitable
hole in a range.
I attempted to clean up the documentation and range calculations to be
as consistent and clear as possible for the future.
I also looked at the zoned case and concluded that the loop there is
different and not to be unified with this one. As far as I can tell, the
zoned check will only further constrain the hole so looping back to find
more holes is acceptable. Though given that zoned really only appends, I
find it highly unlikely that it is susceptible to this bug.
Fixes: 1b98450816 ("Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole")
Reported-by: Dimitrios Apostolou <jimis@gmx.net>
Closes: https://lore.kernel.org/linux-btrfs/q7760374-q1p4-029o-5149-26p28421s468@tzk.arg/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a1f4264da ]
When the incompat flag EXTENT_TREE_V2 is set, we unconditionally add the
block group tree to the switch_commits list before calling
switch_commit_roots, as we do for the tree root and the chunk root.
However, the block group tree uses normal root dirty tracking and in any
transaction that does an allocation and dirties a block group, the block
group root will already be linked to a list by the dirty_list field and
this use of list_add_tail() is invalid and corrupts the prev/next
members of block_group_root->dirty_list.
This is apparent on a subsequent list_del on the prev if we enable
CONFIG_DEBUG_LIST:
[32.1571] ------------[ cut here ]------------
[32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538)
[32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607
[32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none)
[32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014
[32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x108/0x120
[32.1593] RSP: 0018:ffffaa288287fdd0 EFLAGS: 00010202
[32.1594] RAX: 0000000000000001 RBX: ffff95889326e800 RCX:ffff958890201538
[32.1596] RDX: ffff9588992bd538 RSI: ffff958890202538 RDI:ffffffff82a41e00
[32.1597] RBP: ffff958890202538 R08: ffffffff828fc1e8 R09:00000000ffffefff
[32.1599] R10: ffffffff8288c200 R11: ffffffff828e4200 R12:ffff958890201538
[32.1601] R13: ffff95889326e958 R14: ffff958895c24000 R15:ffff958890202538
[32.1603] FS: 00007f0c28eb5740(0000) GS:ffff958af2bd2000(0000)knlGS:0000000000000000
[32.1605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[32.1607] CR2: 00007f0c28e8a3cc CR3: 0000000109942005 CR4:0000000000370ef0
[32.1609] Call Trace:
[32.1610] <TASK>
[32.1611] switch_commit_roots+0x82/0x1d0 [btrfs]
[32.1615] btrfs_commit_transaction+0x968/0x1550 [btrfs]
[32.1618] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[32.1621] __iterate_supers+0xe8/0x190
[32.1622] ? __pfx_sync_fs_one_sb+0x10/0x10
[32.1623] ksys_sync+0x63/0xb0
[32.1624] __do_sys_sync+0xe/0x20
[32.1625] do_syscall_64+0x73/0x450
[32.1626] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[32.1627] RIP: 0033:0x7f0c28d05d2b
[32.1632] RSP: 002b:00007ffc9d988048 EFLAGS: 00000246 ORIG_RAX:00000000000000a2
[32.1634] RAX: ffffffffffffffda RBX: 00007ffc9d988228 RCX:00007f0c28d05d2b
[32.1636] RDX: 00007f0c28e02301 RSI: 00007ffc9d989b21 RDI:00007f0c28dba90d
[32.1637] RBP: 0000000000000001 R08: 0000000000000001 R09:0000000000000000
[32.1639] R10: 0000000000000000 R11: 0000000000000246 R12:000055b96572cb80
[32.1641] R13: 000055b96572b19f R14: 00007f0c28dfa434 R15:000055b96572b034
[32.1643] </TASK>
[32.1644] irq event stamp: 0
[32.1644] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[32.1646] hardirqs last disabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1648] softirqs last enabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1650] softirqs last disabled at (0): [<0000000000000000>] 0x0
[32.1652] ---[ end trace 0000000000000000 ]---
Furthermore, this list corruption eventually (when we happen to add a
new block group) results in getting the switch_commits and
dirty_cowonly_roots lists mixed up and attempting to call update_root
on the tree root which can't be found in the tree root, resulting in a
transaction abort:
[87.8269] BTRFS critical (device nvme1n1): unable to find root key (1 0 0) in tree 1
[87.8272] ------------[ cut here ]------------
[87.8274] BTRFS: Transaction aborted (error -117)
[87.8275] WARNING: fs/btrfs/root-tree.c:153 at 0x0, CPU#4: sync/703
[87.8285] CPU: 4 UID: 0 PID: 703 Comm: sync Not tainted 6.18.0 #25 PREEMPT(none)
[87.8287] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-4.fc41 04/01/2014
[87.8289] RIP: 0010:btrfs_update_root+0x296/0x790 [btrfs]
[87.8295] RSP: 0018:ffffa58d035dfd60 EFLAGS: 00010282
[87.8297] RAX: ffff9a59126ddb68 RBX: ffff9a59126dc000 RCX: 0000000000000000
[87.8299] RDX: 0000000000000000 RSI: 00000000ffffff8b RDI: ffffffffc0b28270
[87.8301] RBP: ffff9a5904aec000 R08: 0000000000000000 R09: 00000000ffffefff
[87.8303] R10: ffffffff9ac8c200 R11: ffffffff9ace4200 R12: 0000000000000001
[87.8305] R13: ffff9a59041740e8 R14: ffff9a5904aec1f7 R15: ffff9a590fdefaf0
[87.8307] FS: 00007f54cde6b740(0000) GS:ffff9a5b5a81c000(0000) knlGS:0000000000000000
[87.8309] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[87.8310] CR2: 00007f54cde403cc CR3: 0000000112902004 CR4: 0000000000370ef0
[87.8312] Call Trace:
[87.8313] <TASK>
[87.8314] ? _raw_spin_unlock+0x23/0x40
[87.8315] commit_cowonly_roots+0x1ad/0x250 [btrfs]
[87.8317] ? btrfs_commit_transaction+0x79b/0x1560 [btrfs]
[87.8320] btrfs_commit_transaction+0x8aa/0x1560 [btrfs]
[87.8322] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[87.8325] __iterate_supers+0xf1/0x170
[87.8326] ? __pfx_sync_fs_one_sb+0x10/0x10
[87.8327] ksys_sync+0x63/0xb0
[87.8328] __do_sys_sync+0xe/0x20
[87.8329] do_syscall_64+0x73/0x450
[87.8330] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[87.8331] RIP: 0033:0x7f54cdd05d2b
[87.8336] RSP: 002b:00007fff1b58ff78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a2
[87.8338] RAX: ffffffffffffffda RBX: 00007fff1b590158 RCX: 00007f54cdd05d2b
[87.8340] RDX: 00007f54cde02301 RSI: 00007fff1b592b66 RDI: 00007f54cddba90d
[87.8342] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[87.8344] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e07ca96b80
[87.8346] R13: 000055e07ca9519f R14: 00007f54cddfa434 R15: 000055e07ca95034
[87.8348] </TASK>
[87.8348] irq event stamp: 0
[87.8349] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[87.8351] hardirqs last disabled at (0): [<ffffffff99698797>] copy_process+0xb37/0x21e0
[87.8353] softirqs last enabled at (0): [<ffffffff99698797>] copy_process+0xb37/0x21e0
[87.8355] softirqs last disabled at (0): [<0000000000000000>] 0x0
[87.8357] ---[ end trace 0000000000000000 ]---
[87.8358] BTRFS: error (device nvme1n1 state A) in btrfs_update_root:153: errno=-117 Filesystem corrupted
[87.8360] BTRFS info (device nvme1n1 state EA): forced readonly
[87.8362] BTRFS warning (device nvme1n1 state EA): Skipping commit of aborted transaction.
[87.8364] BTRFS: error (device nvme1n1 state EA) in cleanup_transaction:2037: errno=-117 Filesystem corrupted
Since the block group tree was pulled out of the extent tree and uses
normal root dirty tracking, remove the offending extra list_add. This
fixes the list corruption and the resulting fs corruption.
Fixes: 14033b08a0 ("btrfs: don't save block group root into super block")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51b1fcf71c ]
If we fail to delete the second qgroup relation item, we end up returning
success or -ENOENT in case the first item does not exist, instead of
returning the error from the second item deletion.
Fixes: 73798c465b ("btrfs: qgroup: Try our best to delete qgroup relations")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39b26e017 ]
In case of a zoned RAID, it can happen that a data write is targeting a
sequential write required zone and a conventional zone. In this case the
bio will be marked as REQ_OP_ZONE_APPEND but for the conventional zone,
this needs to be REQ_OP_WRITE.
The setting of REQ_OP_ZONE_APPEND is deferred to the last possible time in
btrfs_submit_dev_bio(), but the decision if we can use zone append is
cached in btrfs_bio.
CC: Naohiro Aota <naohiro.aota@wdc.com>
Fixes: e9b9b911e0 ("btrfs: add raid stripe tree to features enabled with debug config")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd57c78aec ]
[ENHANCEMENT]
Btrfs currently calculates data checksums then submits the bio.
But after commit 968f19c5b1 ("btrfs: always fallback to buffered write
if the inode requires checksum"), any writes with data checksum will
fallback to buffered IO, meaning the content will not change during
writeback.
This means we're safe to calculate the data checksum and submit the bio
in parallel, and only need the following new behavior:
- Wait the csum generation to finish before calling btrfs_bio::end_io()
Or this can lead to use-after-free for the csum generation worker.
- Save the current bi_iter for csum_one_bio()
As the submission part can advance btrfs_bio::bio.bi_iter, if not
saved csum_one_bio() may got an empty bi_iter and do not generate any
checksum.
Unfortunately this means we have to increase the size of btrfs_bio for
16 bytes, but this is still acceptable.
As usual, such new feature is hidden behind the experimental flag.
[THEORETIC ANALYZE]
Consider the following theoretic hardware performance, which should be
more or less close to modern mainstream hardware:
Memory bandwidth: 50GiB/s
CRC32C bandwidth: 45GiB/s
SSD bandwidth: 8GiB/s
Then write bandwidth with data checksum before the patch is:
1 / ( 1 / 50 + 1 / 45 + 1 / 8) = 5.98 GiB/s
After the patch, the bandwidth is:
1 / ( 1 / 50 + max( 1 / 45 + 1 / 8)) = 6.90 GiB/s
The difference is 15.32% improvement.
[REAL WORLD BENCHMARK]
I'm using a Zen5 (HX 370) as the host, the VM has 4GiB memory, 10 vCPUs, the
storage is backed by a PCIe gen3 x4 NVMe.
The test is a direct IO write, with 1MiB block size, write 7GiB data
into a btrfs mount with data checksum. Thus the direct write will
fallback to buffered one:
Vanilla Datasum: 1619.97 GiB/s
Patched Datasum: 1792.26 GiB/s
Diff +10.6 %
In my case, the bottleneck is the storage, thus the improvement is not
reaching the theoretic one, but still some observable improvement.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: b39b26e017 ("btrfs: zoned: don't zone append to conventional zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4591c3ef75 ]
[BACKGROUND]
Btrfs has a lot of different bi_end_io functions, to handle different
raid profiles. But they introduced a lot of different contexts for
btrfs_bio::end_io() calls:
- Simple read bios
Run in task context, backed by either endio_meta_workers or
endio_workers.
- Simple write bios
Run in IRQ context.
- RAID56 write or rebuild bios
Run in task context, backed by rmw_workers.
- Mirrored write bios
Run in irq context.
This is inconsistent, and contributes to the number of workqueues used
in btrfs.
[ENHANCEMENT]
Make all the above bios call their btrfs_bio::end_io() in task context,
backed by either endio_meta_workers for metadata, or endio_workers for
data.
For simple write bios, merge the handling into simple_end_io_work().
For mirrored write bios, it will be a little more complex, since both
the original or the cloned bios can run the final btrfs_bio::end_io().
Here we make sure the cloned bios are using btrfs_bioset, to reuse the
end_io_work, and run both original and cloned work inside the workqueue.
Add extra ASSERT()s to make sure btrfs_bio_end_io() is running in task
context.
This not only unifies the context for btrfs_bio::end_io() functions, but
also opens a new door for further btrfs_bio::end_io() related cleanups.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: b39b26e017 ("btrfs: zoned: don't zone append to conventional zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81cea6cd70 ]
Currently there is only one caller which doesn't populate
btrfs_bio::inode, and that's scrub.
The idea is scrub doesn't want any automatic csum verification nor
read-repair, as everything will be handled by scrub itself.
However that behavior is really no different than metadata inode, thus
we can reuse btree_inode as btrfs_bio::inode for scrub.
The only exception is in btrfs_submit_chunk() where if a bbio is from
scrub or data reloc inode, we set rst_search_commit_root to true.
This means we still need a way to distinguish scrub from metadata, but
that can be done by a new flag inside btrfs_bio.
Now btrfs_bio::inode is a mandatory parameter, we can extract fs_info
from that inode thus can remove btrfs_bio::fs_info to save 8 bytes from
btrfs_bio structure.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: b39b26e017 ("btrfs: zoned: don't zone append to conventional zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5667f9c8e ]
[BUG]
When I tried to remove btrfs_bio::fs_info and use btrfs_bio::inode to
grab the fs_info, the header "btrfs_inode.h" is needed to access the
full btrfs_inode structure.
Then btrfs will fail to compile.
[CAUSE]
There is a recursive including chain:
"bio.h" -> "btrfs_inode.h" -> "extent_map.h" -> "compression.h" ->
"bio.h"
That recursive including is causing problems for btrfs.
[ENHANCEMENT]
To reduce the risk of recursive including:
- Remove unnecessary local includes from btrfs headers
Either the included header is pulled in by other headers, or is
completely unnecessary.
- Remove btrfs local includes if the header only requires a pointer
In that case let the implementing C file to pull the required header.
This is especially important for headers like "btrfs_inode.h" which
pulls in a lot of other btrfs headers, thus it's a mine field of
recursive including.
- Remove unnecessary temporary structure definition
Either if we have included the header defining the structure, or
completely unused.
Now including "btrfs_inode.h" inside "bio.h" is completely fine,
although "btrfs_inode.h" still includes "extent_map.h", but that header
only includes "fs.h", no more chain back to "bio.h".
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: b39b26e017 ("btrfs: zoned: don't zone append to conventional zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc804a8d7e ]
I/O requests beyond the end of the filesystem should be zeroed out,
similar to loopback devices and that is what we expect.
Fixes: ce63cb62d7 ("erofs: support unencoded inodes for fileio")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80d0c27a0a ]
These BIOs are actually harmless in practice, as they are all pseudo
BIOs and do not use advanced features like chaining. Using the BIO
interface is a more friendly and unified approach for both bdev and
and file-backed I/Os (compared to awkward bvec interfaces).
Let's use bio_endio() instead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Stable-dep-of: bc804a8d7e ("erofs: handle end of filesystem properly for file-backed mounts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e91b44c93 ]
get_burstcount() can return -EBUSY on timeout. When this happens,
st33zp24_send() returns directly without releasing the locality
acquired earlier.
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Fixes: bf38b87108 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbd6e97c83 ]
get_burstcount() can return -EBUSY on timeout. When this happens, the
function returns directly without releasing the locality that was
acquired at the beginning of tpm_tis_i2c_send().
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Fixes: aad628c1d9 ("char/tpm: Add new driver for Infineon I2C TIS TPM")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2537089413 ]
The dw_i3c_master_i2c_xfers() function allocates memory for the xfer
structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get()
fails, the function returns without freeing the allocated xfer, resulting
in a memory leak.
Add a dw_i3c_master_free_xfer() call to the error path to ensure the
allocated memory is properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 62fe9d06f5 ("i3c: dw: Add power management support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260126081121.644099-1-zilin@seu.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b58eaa4761 ]
The devs_lock spinlock introduced when adding support for ibi:s was
never initialized.
Fixes: e389b1d72a ("i3c: dw: Add support for in-band interrupts")
Suggested-by: Jani Nurminen <jani.nurminen@windriver.com>
Signed-off-by: Fredrik Markstrom <fredrik.markstrom@est.tech>
Reviewed-by: Ivar Holmqvist <ivar.holmqvist@est.tech>
Link: https://patch.msgid.link/20260116-i3c_dw_initialize_spinlock-v3-1-cf707b6ed75f@est.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faddeb8483 ]
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]
Reported-by: syzbot+ea1cd4aa4d1e98458a55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ea1cd4aa4d1e98458a55
Fixes: d0a22a4b03 ("gfs2: Fix iomap write page reclaim deadlock")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22150a7d40 ]
Commit a475c5dd16 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>.
Fixes: a475c5dd16 ("gfs2: Free quota data objects synchronously")
Reported-by: syzbot+046b605f01802054bff0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=046b605f01802054bff0
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11d763f0b0 ]
Fix a bug in gfs2's asynchronous glock handling for rename and exchange
operations. The original async implementation from commit ad26967b9a
("gfs2: Use async glocks for rename") mentioned that retries were needed
but never implemented them, causing operations to fail with -ESTALE
instead of retrying on timeout.
Also makes the waiting interruptible.
In addition, the timeouts used were too high for situations in which
timing out is a rare but expected scenario. Switch to shorter timeouts
with randomization and exponentional backoff.
Fixes: ad26967b9a ("gfs2: Use async glocks for rename")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
