Commit graph

134,929 commits

Author SHA1 Message Date
David Fries
3ce0516890 drm/kms: load fbcon from drm_kms_helper
Kconfig says fbcon is required by drm_kms_helper.  If radeon, fbcon,
and drm_kms_helper are all modules, radeon is auto loaded (by PCI id?),
drm_kms_helper is loaded because of the module dependency, but fbcon
isn't loaded leaving the console unusable.  Since fbcon is required
and there isn't an explicit module dependency, request the module
to be loaded from drm_kms_helper.

Signed-off-by: David Fries <david@fries.net>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 13:00:04 +10:00
Alex Deucher
7d6aa80c35 drm/radeon/kms/atom: clean up op_mask handler
Readability cleanup and fix debugging output, no
functional change.
Reported-by: Frank Huang <FrankR.Huang@amd.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:58:33 +10:00
Alex Deucher
b61c99de8e drm/radeon/kms: fix DCE4.1 dig routing (v2)
Works more like DCE4.0 despite what the docs say.
This fixes blank screen issues when changing crtc
routing due to incorrect crtc to dig mapping.

v2: only two DIGx blocks, routing is hardcoded
based on link.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:58:18 +10:00
Marek Olšák
48c36c8f9a drm/radeon/kms: allow r500 US_FORMAT regs in the CS checker
add to the 2.8 bump for pageflip

The purpose of these regs is to work around a TX hw bug in R520.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:57:25 +10:00
Tijl Coosemans
21719b398b drm/radeon: Definition of R_0003C2_GENMO_WT seems wrong
In drivers/gpu/drm/radeon/r100d.h R_0003C2_GENMO_WT is defined as 0x3C0.
I think this should be 0x3C2.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:55:33 +10:00
Alex Deucher
a93f344d3c drm/radeon/kms: reorder display resume to avoid problems
On resume, we were attemping to unblank the displays before the
timing and plls had be reprogrammed which led to atom timeouts
waiting for things that are not yet programmed.  Re-program
the mode first, then reset the dpms state.

This fixes the infamous atombios timeouts on resume.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:53:34 +10:00
Alex Deucher
86f5c9edbb drm/radeon/kms/evergreen: reset the grbm blocks at resume and init
This fixes module reloading and resume as the gfx block seems to
be left in a bad state in some cases.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:53:05 +10:00
Alex Deucher
9f0c4f9c2f drm/radeon/kms: fix evergreen asic reset
Only reset the grbm blocks, srbm tends to lock the GPU
if not done properly and in most cases is not necessary.
Also, no need to call asic init after reset the grbm blocks.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:52:54 +10:00
James Simmons
57084d0537 drm/fb: Don't expose mmio for fbdev emulation layer
For the fbdev api if the struct fb_var_screeninfo accel_flags field is set
to FB_ACCELF_TEXT then userland applications can not mmap the mmio region.
Since it is a bad idea for DRM drivers to expose the mmio region via the
fbdev layer we always set the accel_flags to prevent this. Please apply.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:49:44 +10:00
Dave Airlie
92971021c6 Revert "drm: Don't try and disable an encoder that was never enabled"
This reverts commit 541cc96691.

Wei Yonjun reported this caused a regression against Intel VGA hotplug
on his G33 hw.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:47:56 +10:00
Benoit Cousson
f7bb0d9ab2 I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
The convention for omap device naming is omap_XXX.

Rename the device and driver name in order to stick
to this naming convention.

Change device name in clock nodes as well.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ben Dooks <ben-i2c@fluff.org>
Acked-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20 17:53:04 -08:00
Benjamin Herrenschmidt
a56f7428d7 drm/radeon: Add early unregister of firmware fb's
Without this, we attempt the handover too late, the firmware fb
might be accessing the chip simultaneously to us re-initializing
various parts of it, which might frighten babies or cause all sort
of nasty psychologic trauma to kitten.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[danvet: add cc: stable, forward ported and compile-fixed for X86]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[airlied: move to even earlier in module load.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 11:36:14 +10:00
Daniel De Graaf
6a5b3beff9 xenbus: Fix memory leak on release
Pending responses were leaked on close.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-12-20 14:56:09 -08:00
David S. Miller
d9993be65a Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-12-20 13:24:14 -08:00
David Brown
ba119204ff Merge branches 'msm-core' and 'msm-mmc' into for-next
* msm-core: (28 commits)
  msm: initial framebuffer support
  msm: add handling for clocks tagged as CLK_MINMAX
  msm: trout: change name of pmdh_clk to mddi_clk
  msm: add CLK_MINMAX to pmdh_clk
  msm: trout: add gpio_to_irq
  msm: iommu: Use the correct memory allocation flag
  msm_serial: Remove redundant unlikely()
  msm: iommu: Miscellaneous code cleanup
  msm: iommu: Support cache-coherent memory access
  msm: iommu: Definitions for extended memory attributes
  msm: iommu: Kconfig dependency for the IOMMU API
  msm: iommu: Check if device is already attached
  msm: iommu: Kconfig item for cacheable page tables
  msm: iommu: Don't flush page tables if no devices attached
  msm: iommu: Mark functions with the right section names
  msm: iommu: Support for the 2nd GFX core's IOMMU
  msm: iommu: Revise GFX2D0 IOMMU contexts and M2V mappings
  msm: iommu: Revise GFX3D IOMMU contexts and M2V mappings
  msm: iommu: Use more consistent naming in platform data
  msm: iomap: Addresses and IRQs for 2nd GFX core IOMMU
  ...

* msm-mmc: (33 commits)
  mmc: msm_sdcc: Check for only DATA_END interrupt to end a request
  mmc: msm_sdcc: Fix bug in PIO mode when data size is not word aligned
  mmc: msm_sdcc: Reset SDCC in case of data transfer errors
  mmc: msm_sdcc: Add prog done interrupt support
  mmc: msm_sdcc: Fix possible circular locking dependency warning
  msm: initial framebuffer support
  msm: add handling for clocks tagged as CLK_MINMAX
  msm: trout: change name of pmdh_clk to mddi_clk
  msm: add CLK_MINMAX to pmdh_clk
  msm: trout: add gpio_to_irq
  msm: iommu: Use the correct memory allocation flag
  msm_serial: Remove redundant unlikely()
  msm: iommu: Miscellaneous code cleanup
  msm: iommu: Support cache-coherent memory access
  msm: iommu: Definitions for extended memory attributes
  msm: iommu: Kconfig dependency for the IOMMU API
  msm: iommu: Check if device is already attached
  msm: iommu: Kconfig item for cacheable page tables
  msm: iommu: Don't flush page tables if no devices attached
  msm: iommu: Mark functions with the right section names
  ...
2010-12-20 13:11:10 -08:00
Sahitya Tummala
0c521ccbd0 mmc: msm_sdcc: Check for only DATA_END interrupt to end a request
The current code checks for both DATA_END and DATA_BLK_END bits in
MCI_STATUS register and ends a request only if both are set at a time.
The hardware doesn't always set DATA_BLK_END when DATA_END is set.
But DATA_END status itself is sufficient condition from hardware that
data transfer is done and hence, check for only DATA_END interrupt in
software to end a request.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2010-12-20 12:28:32 -08:00
Sahitya Tummala
71dd9106af mmc: msm_sdcc: Fix bug in PIO mode when data size is not word aligned
The current code for PIO doesn't transfer whole data when data size
is not in multiple of 4 bytes. The last few bytes are not written to
the card resulting in no DATAEND interrupt from SDCC. This patch
allows data transfer for non-aligned data size in PIO mode.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2010-12-20 12:28:31 -08:00
Sahitya Tummala
b08bb35d1a mmc: msm_sdcc: Reset SDCC in case of data transfer errors
SDCC uses an asynchronous FIFOs for data synchronization (one for TX
and one for RX).  For any error when DPSM (Data path state machine) is
involved the transfer is terminated with the remaining data stuck inside
FIFOs. Reset the controller in case of data errors to ensure that
any left over data in FIFOs is flushed out and DPSM is in good state.

The following problems are observed without this reset functionality -

1. After the card is removed in an unsafe way (removed when there
is an on going data transfer), the card will not be detected upon
its next insertion.  This is because the controller wouldn't respond
to few initialization commands.

2. When an error occurs for a data transfer in non-DMA mode, sometimes
we get spurious PIO interrupt after the request is processed.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2010-12-20 12:28:31 -08:00
Sahitya Tummala
d5137bdd91 mmc: msm_sdcc: Add prog done interrupt support
Enable prog done interrupt for stop command(CMD12) that is sent
after a multi-block write(CMD25). The PROG_DONE bit is set when
the card has finished its programming and is ready for next data.

After every write request the card will be polled for ready status
using CMD13. For a multi-block write(CMD25) before sending CMD13,
stop command (CMD12) will be sent.  If we enable prog done interrupt
for CMD12, then CMD13 polling can be avoided. The prog done interrupt
means that the card is done with its programming and is ready for
next request.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2010-12-20 12:28:30 -08:00
Sahitya Tummala
62612cf9d9 mmc: msm_sdcc: Fix possible circular locking dependency warning
In the context of request processing thread, data mover lock is
acquired after the host lock.  In another context, in the completion
handler of data mover the locks are acquired in the reverse order,
resulting in possible circular lock dependency warning. Hence,
schedule a tasklet to process the dma completion so as to avoid
nested locks.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2010-12-20 12:28:30 -08:00
Ben Skeggs
147dc38e97 drm/nv50: add missing license header to nv50_fbcon.c
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-21 06:14:37 +10:00
Ben Skeggs
910d1b3a8c drm/nv50: fix smatch warning in nv50_vram.c
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-21 11:53:38 +10:00
Dan Carpenter
d095e23206 drm/nouveau: sizeof() vs ARRAY_SIZE()
ARRAY_SIZE() was intended here, sizeof() is too large.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-21 11:53:32 +10:00
John W. Linville
3d986b25b5 rtlwifi: use alloc_workqueue
create_workqueue is deprecated.  The workqueue usage does not seem to
demand any special treatment, so do not set any flags either.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Tejun Heo <tj@kernel.org>
2010-12-20 14:52:18 -05:00
Felix Fietkau
d4d5dc3d6f ath9k: do not limit the chainmask to 1 for legacy mode
Restricting the chainmask to 1 for legacy mode disables useful features
such as MRC, and it reduces the available transmit power.
I can't think of a good reason to do this in legacy mode, so let's just
get rid of that code.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:52:18 -05:00
Felix Fietkau
f1a8abb045 ath9k_hw: fix PA predistortion HT40 mask
The commit 'ath9k_hw: Disable PAPRD for rates with low Tx power' changed
the code that sets the PAPRD rate masks to use only either the HT20 mask
or the HT40 mask. This is wrong, as the hardware can still use HT20 rates
even when configured for HT40, and the operating channel mode does not
affect PAPRD operation.
The register for the HT40 rate mask is applied as a mask on top of the
other registers to selectively disable PAPRD for specific rates on HT40
packets only.
This patch changes the code back to the old behavior which matches the
intended use of these registers. While with current cards this should not
make any practical difference (according to Atheros, the HT20 and HT40
mask should always be equal), it is more correct that way, and maybe
the HT40 mask will be used for some rare corner cases in the future.

Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:52:18 -05:00
Dan Carpenter
ae29fbb189 wl1251: wl12xx_get_platform_data() returns an ERR_PTR
wl12xx_get_platform_data() returns an ERR_PTR on failure and it never
returns a NULL.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:49:49 -05:00
Larry Finger
d704300fa5 rtlwifi: Fix use of mutex in interrupt code
A previous conversion from semaphoreto mutexes missed the fact that one
of the semaphores was used in interrupt code. Fixed by changing to
a spinlock.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:49:48 -05:00
Mohammed Shafi Shajakhan
b1c1d0003d ath9k: Properly initialize channel table for 2GHz
ath9k channel table for 2Ghz does not seems to initialize the 'band'
parameter.Though it does not seems to cause any visible issue it looks
odd when we initialize the 'band' parameter for 5Ghz channel table while
not so for 2Ghz.

Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:49:48 -05:00
Anisse Astier
18db45c46e rtl8192ce: Fix typo in Kconfig description
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:49:48 -05:00
Felix Fietkau
55821324dc ath9k_hw: remove baseband rfsilent support
When rfkill is enabled, ath9k_hw unnecessarily configured the baseband to
turn off based on GPIO input, however that code was hardcoded to GPIO 0
instead of ah->rfkill_gpio.
Since ath9k uses software rfkill anyway, this code is completely unnecessary
and should be removed in case anything else ever uses GPIO 0.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:49:48 -05:00
Felix Fietkau
4b3ba66a47 ath9k: fix queue depth check for forming new aggregates
To improve aggregation length, there should not be more than two fully formed
A-MPDU frames in the hardware queue. To ensure this, the code checks the tx
queue length before forming new A-MPDUs. This can reduce the throughput (or
maybe even starve out A-MPDU traffic) when too many non-aggregated frames are
in the queue.
Fix this by keeping track of pending A-MPDU frames (even when they're sent out
as single frames), but exclude rate control probing frames to improve
performance.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:49:48 -05:00
John W. Linville
5c405b5c3e rtl8192ce: drop 'rtl8192c-' prefix from files
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
2010-12-20 14:49:47 -05:00
Bruno Randolf
3de135dba9 ath5k: Set available antenna information for cfg80211
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:49:47 -05:00
Meelis Roos
b2b7ab22fa hostap: remove netif_stop_queue from init
Fix runtime warning with backtrace from hostap by removing
netif_stop_queue() call before register_netdev. Tested to work fine on
hostap_pci Prism 2.5.

(This removes a warning about calling netif_stop_queue before
register_netdev is called. -- JWL)

Signed-off-by: Meelis Roos <mroos@linux.ee>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:22:07 -05:00
Johannes Stezenbach
9f333281a7 mac80211/rt2x00: add ieee80211_tx_status_ni()
All rt2x00 drivers except rt2800pci call ieee80211_tx_status() from
a workqueue, which causes "NOHZ: local_softirq_pending 08" messages.

To fix it, add ieee80211_tx_status_ni() similar to ieee80211_rx_ni()
which can be called from process context, and call it from
rt2x00lib_txdone().  For the rt2800pci special case a driver
flag is introduced.

https://bugzilla.kernel.org/show_bug.cgi?id=24892

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 13:48:04 -05:00
Dan Carpenter
f955e1415f vmxnet3: locking problems in xmit
There were several paths that didn't release their locks.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20 10:44:25 -08:00
Dan Carpenter
914e5cea14 typhoon: memory corruption in typhoon_get_drvinfo()
info->version only has space for 32 characters but my UTS_RELEASE is
"2.6.37-rc6-next-20101217-05817-ge935fc8-dirty" so it doesn't fit.
This is supposed to be the version of the driver, not the kernel
version.  This driver doesn't have a version so lets just leave it
blank.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20 10:43:02 -08:00
Andreas Mohr
bbccc16c8a net: Add USB PID for new MOSCHIP USB ethernet controller MCS7832 variant
Due to active notification of the new MCS7832 version by the manufacturer
(Mr. Milton; thanks!) -- quote: "functionality same as MCS7830",
I'm now submitting this patch (on -rc6), intended for networking.git and -stable.

- add MCS7832 USB PID to be able to support this new device variant, too
- add related descriptions

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20 10:38:47 -08:00
Breno Leitao
782615aea8 ehea: Fixing some message level
Currently there are some info message that is set as error, and an error
message that is set as debug. This patch just fixes it.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20 10:35:25 -08:00
Linus Torvalds
8cad7f06e3 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] gspca - sonixj: Better handling of the bridge registers 0x01 and 0x17
  [media] gspca - sonixj: Add the bit definitions of the bridge reg 0x01 and 0x17
  [media] gspca - sonixj: Set the flag for some devices
  [media] gspca - sonixj: Add a flag in the driver_info table
  [media] gspca - sonixj: Fix a bad probe exchange
  [media] gspca - sonixj: Move bridge init to sd start
  [media] bttv: remove unneeded locking comments
  [media] bttv: fix mutex use before init (BZ#24602)
  [media] Don't export format_by_forcc on two different drivers
2010-12-20 10:35:04 -08:00
Jing Huang
8816624222 [SCSI] bfa: rename log_level to bfa_log_level
Rename log_level to bfa_log_level to make the global variable more bfa
specific and avoid clashes with other drivers which was causing a
build failure.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-20 12:28:34 -06:00
Linus Torvalds
9e0afb9437 Merge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  clocksource: sh_cmt: Remove nested spinlock fix
2010-12-20 09:53:50 -08:00
Linus Torvalds
7aeb3be341 Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6
* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
  OMAP: OMAPFB: disable old omapfb for OMAP4 builds
  OMAP: DSS: VRAM: Align start & size of vram to 2M
2010-12-20 09:49:54 -08:00
Linus Torvalds
7f8635cc9e Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix cciss_revalidate panic
  block: max hardware sectors limit wrapper
  block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
  blk-throttle: Correct the placement of smp_rmb()
  blk-throttle: Trim/adjust slice_end once a bio has been dispatched
  block: check for proper length of iov entries earlier in blk_rq_map_user_iov()
  drbd: fix for spin_lock_irqsave in endio callback
  drbd: don't recvmsg with zero length
2010-12-20 09:19:46 -08:00
Jarod Wilson
501aaa110a [media] mceusb: set a default rx timeout
Its possible for the call to read rx timeout from the hardware to fail,
in which case we end up with a bogus rx timeout value. Set a default one
when filling in the rc struct, and we'll just overwrite it later w/the
value from hardware, but if that read fails, we've at least got a sane
rx timeout value to work with (1000ms is the default value I've seen
returned on most if not all mceusb hardware).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:18 -02:00
Jarod Wilson
d8cc7fd7e6 [media] mceusb: fix inverted mask inversion logic
As it turns out, somewhere along the way, we managed to invert the
meaning of the tx_mask_inverted flag. Looking back over the old lirc
driver, tx_mask_inverted was set to 0 if the device was in tx_mask_list.
Now we have a tx_mask_inverted flag set to 1 for all the devices that
were in the list, and set tx_mask_inverted to that flag value, which is
actually the opposite of what we used to set, causing set_tx_mask to use
the wrong mask setting option. Since there seem to be more devices with
inverted masks than not (using the original device as the baseline for
inverted vs. normal), lets just call the ones currently marked as
inverted normal instead, and flip the if/else actions that key off of
the inverted flag.

Note: the problem only cropped up if a call to set_tx_mask was made, if
no mask was set, the device would work just fine, which is why this
managed to slip though w/o getting noticed until now.

Tested successfully by myself and Dennis Gilmore.

Reported-by: Dennis Gilmore <dgilmore@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:17 -02:00
Jarod Wilson
fbb1f1b0db [media] mceusb: add another Fintek device ID
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:16 -02:00
Dan Carpenter
250f7a5f62 [media] lirc_dev: fixes in lirc_dev_fop_read()
This makes several changes but they're in one function and sort of
related:

"buf" was leaked on error.  The leak if we try to read an invalid
length is the main concern because it could be triggered over and
over.

If the copy_to_user() failed, then the original code returned the
number of bytes remaining.  read() is supposed to be the opposite way,
where we return the number of bytes copied.  I changed it to just return
-EFAULT on errors.

Also I changed the debug output from "-EFAULT" to just "<fail>" because
it isn't -EFAULT necessarily.  And since we go though that path if the
length is invalid now, there was another debug print that I removed.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:15 -02:00
Dan Carpenter
5c769a68be [media] lirc_dev: stray unlock in lirc_dev_fop_poll()
We shouldn't unlock here.  I think this was a cut and paste error.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:14 -02:00