Commit graph

134,929 commits

Author SHA1 Message Date
Rafael J. Wysocki
b581a7f9c3 ACPI: Execute _PRW for devices reported as inactive or not present
If a device is reported as inactive or not present by its _STA
control method, acpi_bus_check_add() skips it without evaluating its
_PRW method.  This leads to a problem when the device's _PRW method
points to a GPE, because in that case the GPE may be enabled by
ACPICA during the subsequent acpi_update_gpes() call which, in
turn, may cause a GPE storm to appear.

To avoid this issue, make acpi_bus_check_add() evaluate _PRW for
inactive or not present devices and register the wakeup GPE
information returned by them, so that acpi_update_gpes() does not
enable their GPEs unnecessarily.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-17 16:39:11 -05:00
Jean-Francois Moine
0e4d413af1 [media] gspca - sonixj: Better handling of the bridge registers 0x01 and 0x17
The initial values of the registers 0x01 and 0x17 are taken from the sensor
table at capture start and updated according to the flag PDN_INV.

Their values are updated at each step of the capture initialization and
memorized for reuse in capture stop.

This patch also fixed automatically some bad hardcoded values of these
registers.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17 18:49:11 -02:00
Jean-Francois Moine
4fd350ee2b [media] gspca - sonixj: Add the bit definitions of the bridge reg 0x01 and 0x17
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17 18:49:00 -02:00
Jean-Francois Moine
b2272a49e7 [media] gspca - sonixj: Set the flag for some devices
The flag PDN_INV indicates that the sensor pin S_PWR_DN has not the same
value as other webcams with the same sensor. For now, only two webcams have
been so detected: the Microsoft's VX1000 and VX3000.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17 18:48:46 -02:00
Jean-Francois Moine
c6c1433071 [media] gspca - sonixj: Add a flag in the driver_info table
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17 18:48:30 -02:00
Jean-Francois Moine
4f67f3adef [media] gspca - sonixj: Fix a bad probe exchange
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17 18:48:18 -02:00
Jean-Francois Moine
5e68f400aa [media] gspca - sonixj: Move bridge init to sd start
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17 18:47:53 -02:00
Brandon Philips
692e42df12 [media] bttv: remove unneeded locking comments
After Mauro's "bttv: Fix locking issues due to BKL removal code" there
are a number of comments that are no longer needed about lock ordering.
Remove them.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17 18:43:56 -02:00
Mauro Carvalho Chehab
587f0d5d6d [media] bttv: fix mutex use before init (BZ#24602)
Fix a regression where bttv driver causes oopses when loading, since it
were using some non-initialized mutexes. While it would be possible to
fix the issue, there are some other lock troubles, like to the presence of
lock code at free_btres_lock().

It is possible to fix, but the better is to just use the core-assisted
locking schema. This way, V4L2 core will serialize access to all
ioctl's/open/close/mmap/read/poll operations, avoiding to have two
processes accessing the hardware at the same time. Also, as there's just
one lock, instead of 3, there's no risk of dead locks.

The net result is a cleaner code, with just one lock.

Reported-by: Dan Carpenter <error27@gmail.com>
Reported-by: Brandon Philips<brandon@ifup.org>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17 18:39:43 -02:00
David S. Miller
b4aa9e05a6 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x/bnx2x.h
	drivers/net/wireless/iwlwifi/iwl-1000.c
	drivers/net/wireless/iwlwifi/iwl-6000.c
	drivers/net/wireless/iwlwifi/iwl-core.h
	drivers/vhost/vhost.c
2010-12-17 12:27:22 -08:00
Arnaud Ebalard
f4680d3db7 asix: add USB ID for Logitec LAN-GTJ U2A
Logitec LAN-GTJ U2A (http://www.pro.logitec.co.jp/pro/g/gLAN-GTJU2A/)
USB 2.0 10/10/1000 Ethernet adapter is based on ASIX AX88178 chipset.

This patch adds missing USB ID for the device.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:50:20 -08:00
Rajesh Borundia
1dc0f3c54c qlcnic: reset pci function unconditionally during probe
Some boot code drivers dont have cleanup routine, so pci function
remains in unknown state prior to driver load. So during driver load
issue FLR unconditionally.

Update driver version to 5.0.14.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:39:02 -08:00
Rajesh Borundia
b5006dcb10 qlcnic: fix ocm window register offset calculation
OCM window register offset was calculated incorrectly for
pci function greater than zero.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:39:01 -08:00
Sucheta Chakraborty
c75822a309 qlcnic: fix LED test when interface is down.
When interface is down, create temporary context to config LED.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:39:01 -08:00
Ben Hutchings
46814e08d8 tehuti: Firmware filename is tehuti/bdx.bin
My conversion of tehuti to use request_firmware() was confused about
the filename of the firmware blob.  Change the driver to match the
blob.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 10:17:12 -08:00
Bjorn Helgaas
6db45b76ea Revert "PCI: allocate bus resources from the top down"
This reverts commit b126b4703a.

We're going back to the old behavior of allocating from bus resources
in _CRS order.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:00:54 -08:00
Bjorn Helgaas
ac57cd5ee1 Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"
This reverts commit 82e3e767c2.

We're going back to considering bus resources in the order we found
them (in _CRS order, when we're using _CRS), so we don't need to
define any ordering.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:00:38 -08:00
Linus Torvalds
8efc1a1a22 Merge branch 'bkl_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'bkl_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] uvcvideo: Convert to unlocked_ioctl
  [media] uvcvideo: Lock stream mutex when accessing format-related information
  [media] uvcvideo: Move mmap() handler to uvc_queue.c
  [media] uvcvideo: Move mutex lock/unlock inside uvc_free_buffers
  [media] uvcvideo: Lock controls mutex when querying menus
  [media] v4l2-dev: fix race condition
  [media] V4L: improve the BKL replacement heuristic
  [media] v4l2-dev: use mutex_lock_interruptible instead of plain mutex_lock
  [media] cx18: convert to unlocked_ioctl
  [media] radio-timb: convert to unlocked_ioctl
  [media] sh_vou: convert to unlocked_ioctl
  [media] cafe_ccic: replace ioctl by unlocked_ioctl
  [media] et61x251_core: trivial conversion to unlocked_ioctl
  [media] sn9c102: convert to unlocked_ioctl
  [media] BKL: trivial ioctl -> unlocked_ioctl video driver conversions
  [media] typhoon: convert to unlocked_ioctl
  [media] si4713: convert to unlocked_ioctl
  [media] tea5764: convert to unlocked_ioctl
  [media] cadet: use unlocked_ioctl
  [media] BKL: trivial BKL removal from V4L2 radio drivers
2010-12-17 09:28:17 -08:00
Christoph Lameter
3ea9f6833c connector: Use this_cpu operations
The patch was originally in the use cpuops patchset but it needs an
inc_return and is therefore dependent on an extension of the cpu ops.
Fixed up and verified that it compiles.

get_seq can benefit from this_cpu_operations.  Address calculation is
avoided and the increment is done using an xadd.

Cc: Scott James Remnant <scott@ubuntu.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:18:05 +01:00
Christoph Lameter
b2e4ae6975 xen: Use this_cpu_inc_return
__this_cpu_inc_return reduces code and simplifies code.

Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
2010-12-17 15:18:05 +01:00
Christoph Lameter
b29c617af3 random: Use this_cpu_inc_return
__this_cpu_inc can create a single instruction to do the same as
__get_cpu_var()++.

Cc: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:18:05 +01:00
Tejun Heo
275c8b9328 Merge branch 'this_cpu_ops' into for-2.6.38 2010-12-17 15:16:46 +01:00
Christoph Lameter
780f36d8b3 xen: Use this_cpu_ops
Use this_cpu_ops to reduce code size and simplify things in various places.

V3->V4:
	Move instance of this_cpu_inc_return to a later patchset so that
	this patch can be applied without infrastructure changes.

Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:19 +01:00
Christoph Lameter
5309665dcc fakekey: Simplify speakup_fake_key_pressed through this_cpu_ops
The whole function can be expressed as a simple this_cpu_read() operation.
The function overhead is now likely multiple times that of the single
instruction that is executed in it.

Sedat: fixed compile failure caused by an extra ')'.

Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:19 +01:00
Christoph Lameter
4a6f4fe837 drivers: Replace __get_cpu_var with __this_cpu_read if not used for an address.
__get_cpu_var() can be replaced with this_cpu_read and will then use a single
read instruction with implied address calculation to access the correct per cpu
instance.

However, the address of a per cpu variable passed to __this_cpu_read() cannot be
determed (since its an implied address conversion through segment prefixes).
Therefore apply this only to uses of __get_cpu_var where the addres of the
variable is not used.

V3->V4:
	- Move one instance of this_cpu_inc_return to a later patch
	  so that this one can go in without percpu infrastructrure
	  changes.

Sedat: fixed compile failure caused by an extra ')'.

Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:18 +01:00
Chris Wilson
9c3d2f7ffa drm/i915: Enable EI mode for RCx decision making on Sandybridge
And no I have no idea what the difference is either, just that is the
recommendation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-17 10:54:26 +00:00
Takashi YOSHII
65ada547d6 clocksource: sh_cmt: Remove nested spinlock fix
There are control flow that sh_cmt_set_next() does double
spin-lock. The callers sh_cmt_{start,stop}() already have
lock. But another callers sh_cmt_clock_event_{start,next}()
does not.

Now sh_cmt_set_next() does not lock by itself. All the
callers should hold spin-lock before calling it.

[damm@opensource.se: use __sh_cmt_set_next() to simplify code]
[damm@opensource.se: added stable, suitable for v2.6.35 + v2.6.36]
Cc: stable@kernel.org
Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-17 19:38:33 +09:00
Paul Mundt
03aa18f550 dma: shdma: NMI support.
Presently DMA transfers are interrupted and aborted by the NMI. This
implements some basic logic for more gracefully handling and clearing
each controller's NMIF flag via the NMI die chain, needed to resume
transfers post-NMI.

Reported-by: Michael Szafranek <Michael.Szafranek@emtrion.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-17 19:16:10 +09:00
Stephen M. Cameron
0fc13c8995 cciss: fix cciss_revalidate panic
If you delete a logical drive, and then run BLKRRPART (e.g. via fdisk)
on a logical drive which is "after" the deleted logical drive in the h->drv[]
array, then cciss_revalidate panics because it will access the null pointer
h->drv[x] when x hits the deleted drive.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 09:01:37 +01:00
Michał Mirosław
a8adbe378b fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
This patch pulls calls to buf->ops->confirm() from all actors passed
(also indirectly) to splice_from_pipe_feed().

Is avoiding the call to buf->ops->confirm() while splice()ing to
/dev/null is an intentional optimization? No other user does that
and this will remove this special case.

Against current linux.git 6313e3c217.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:56:44 +01:00
Mike Snitzer
72d4cd9f38 block: max hardware sectors limit wrapper
Implement blk_limits_max_hw_sectors() and make
blk_queue_max_hw_sectors() a wrapper around it.

DM needs this to avoid setting queue_limits' max_hw_sectors and
max_sectors directly.  dm_set_device_limits() now leverages
blk_limits_max_hw_sectors() logic to establish the appropriate
max_hw_sectors minimum (PAGE_SIZE).  Fixes issue where DM was
incorrectly setting max_sectors rather than max_hw_sectors (which
caused dm_merge_bvec()'s max_hw_sectors check to be ineffective).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:36:01 +01:00
Martin K. Petersen
e692cb668f block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
When stacking devices, a request_queue is not always available. This
forced us to have a no_cluster flag in the queue_limits that could be
used as a carrier until the request_queue had been set up for a
metadevice.

There were several problems with that approach. First of all it was up
to the stacking device to remember to set queue flag after stacking had
completed. Also, the queue flag and the queue limits had to be kept in
sync at all times. We got that wrong, which could lead to us issuing
commands that went beyond the max scatterlist limit set by the driver.

The proper fix is to avoid having two flags for tracking the same thing.
We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the
block layer merging functions. The queue_limit 'no_cluster' is turned
into 'cluster' to avoid double negatives and to ease stacking.
Clustering defaults to being enabled as before. The queue flag logic is
removed from the stacking function, and explicitly setting the cluster
flag is no longer necessary in DM and MD.

Reported-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:35:53 +01:00
Werner Fink
b7b8de0873 TTY: Add tty ioctl to figure device node of the system console.
This has been in the SuSE kernels for a very long time.

Signed-off-by: Werner Fink <werner@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 16:18:28 -08:00
Kay Sievers
fbc92a3455 tty: add 'active' sysfs attribute to tty0 and console device
tty: add 'active' sysfs attribute to tty0 and console device

Userspace can query the actual virtual console, and the configured
console devices behind /dev/tt0 and /dev/console.

The last entry in the list of devices is the active device, analog
to the console= kernel command line option.

The attribute supports poll(), which is raised when the virtual
console is changed or /dev/console is reconfigured.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

index 0000000..b138b66
2010-12-16 16:15:34 -08:00
Greg Kroah-Hartman
dbb442b85a Revert "USB: gadget: Allow function access to device ID data during bind()"
This reverts commit 1ab8323874.

Turns out this doesn't allow for the device ids to be overridden
properly, so we need to revert the thing.

Reported-by: Jef Driesen <jefdriesen@telenet.be>
Cc: Robert Lukassen <Robert.Lukassen@tomtom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 15:52:30 -08:00
Thomas Sailer
ecc1624a2f USB: misc: uss720.c: add another vendor/product ID
Fabio Battaglia report that he has another cable that works with this
driver, so this patch adds its vendor/product ID.

Signed-off-by: Thomas Sailer <t.sailer@alumni.ethz.ch>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 15:45:45 -08:00
Vitaly Kuznetsov
d73a9b3001 USB: usb-storage: unusual_devs entry for the Samsung YP-CP3
Add an unusual_devs entry for the Samsung YP-CP3 MP4 player.

User was getting the following errors in dmesg:
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: USB disconnect, address 2
 sd 3:0:0:0: [sdb] Assuming drive cache: write through
 sdb:<2>ldm_validate_partition_table(): Disk read failed.
 Dev sdb: unable to read RDB block 0
  unable to read partition table

Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
CC: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 15:45:45 -08:00
Pavankumar Kondeti
daba58035a USB: gadget: Remove suspended sysfs file before freeing cdev
cdev struct is accessed in suspended sysfs show function.  So
remove sysfs file before freeing the cdev in composite_unbind.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 15:45:44 -08:00
Pavankumar Kondeti
f4ce908447 USB: core: Add input prompt and help text for USB_OTG config
bd6882 commit (usb: gadget: fix Kconfig warning) removes
the duplicate USB_OTG config from gadget/Kconfig.  But
does not copy the input prompt and help text to the original
config defined in core/Kconfig. Add them now.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 15:45:44 -08:00
Sven Eckelmann
63d5e5a727 Staging: batman-adv: Remove batman-adv from staging
batman-adv is now moved to net/batman-adv/ and can be removed from
staging.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 15:20:05 -08:00
Eric Dumazet
7edc3453e5 ifb: fix a lockdep splat
After recent ifb changes, we must use lockless __skb_dequeue() since
lock is not anymore initialized.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jamal Hadi Salim <hadi@cyberus.ca>
Cc: Changli Gao <xiaosuo@gmail.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 14:54:52 -08:00
Michał Mirosław
0d0b16727f net: Fix drivers advertising HW_CSUM feature to use csum_start
Some drivers are using skb_transport_offset(skb) instead of skb->csum_start
for NETIF_F_HW_CSUM offload.  This does not matter now, but if someone
implements checksumming of encapsulated packets then this will break silently.

TSO output paths are left as they are, since they are for IP+TCP only
(might be worth converting though).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 14:43:15 -08:00
Michał Mirosław
55508d601d net: Use skb_checksum_start_offset()
Replace skb->csum_start - skb_headroom(skb) with skb_checksum_start_offset().

Note for usb/smsc95xx: skb->data - skb->head == skb_headroom(skb).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 14:43:14 -08:00
Michał Mirosław
0b7967503d net/veth: Fix packet checksumming
We can't change ip_summed from CHECKSUM_PARTIAL to CHECKSUM_NONE
or CHECKSUM_UNNECESSARY because checksum in packet's headers is
not valid and will cause invalid checksum when frame is forwarded.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 14:41:35 -08:00
Ivan Vecera
2984961c38 be2net: use mutex instead of spin lock for mbox_lock
Since the mbox polling uses the schedule_timeout, the mbox_lock should be
a mutex and not a spin lock.
The commit f25b03a replaced udelay() with schedule_timeout() but didn't
change mbox_lock to semaphore or mutex.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 14:12:26 -08:00
Neil Horman
49c2fa08a7 PCI: Update MCP55 quirk to not affect non HyperTransport variants
I wrote this quirk awhile ago to properly setup MCP55 chips on hypertransport
busses so that interrupts reached whatever cpu happend to boot the kdump kernel.
while that works well, it was recently shown to me that a a non-hypertransport
variant of the MCP55 exists, and on those system the register that this quirk
manipulates causes hangs if you write to it.  Since the quirk was only meant to
handle errors found on MCP55 chips that have a HT interface, this patch adds a
filter to make sure the chip is an HT capable before making the needed register
adjustment.  This lets the broken MCP55s work with kdump while not breaking the
non-HT variants.

Resolves https://bugzilla.kernel.org/show_bug.cgi?id=23952

Tested successfully by the reporter and myself.

Cc: stable@kernel.org
Reported-by: Mathieu Bérard <mathieu@mberard.eu>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-16 14:07:31 -08:00
Greg Kroah-Hartman
c466cd2bb9 USB: serial: ftdi_sio: add support for TIOCSERGETLSR
Willem-Jan noticed that the ftdi_sio driver did not support the
TIOCSERGETLSR ioctl, and some userspace programs rely on it.  This patch
adds the support.

Reported-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl>
Tested-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:40:42 -08:00
Fabio Estevam
0247a7bcd4 USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
In order to read/write to the i.MX OTG viewport register it is necessary to setup
the PORTSCx register first.

By default i.MX OTG port is configured for USB serial PHY. In order to use a ULPI PHY
the PORTSCx register needs to be configured properly.

commit 724c852 (USB: ehci/mxc: compile fix) placed the PORTSC setup after the OTG
viewport is accessed and this causes ULPI read/write to fail.

Revert the PORTSC setup order.

Tested on a MX31PDK board with a ISP1504 transceiver:

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
mxc-ehci mxc-ehci.0: initializing i.MX USB Controller
ULPI transceiver vendor/product ID 0x04cc/0x1504
Found NXP ISP1504 ULPI transceiver.
ULPI integrity check: passed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:37:48 -08:00
Rob Emanuele
2c8245c499 USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()
Add a free_irq() call on vbus gpio when we remove udc so that the
vbus irq is properly released.

Signed-off-by: Rob Emanuele <rje@crystalfontz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:36:12 -08:00
Anand Gadiyar
6ef9fc657b usb: ehci-omap: fix tll channel enable mask
The TLL channel enable code searches for the wrong mask, and
could end up enabling the wrong port. Fix this.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:36:12 -08:00