Commit graph

134,929 commits

Author SHA1 Message Date
Keshava Munegowda
a0c9e95dfc usb: ohci-omap3: fix trivial typo
This is the ohci-omap3 driver, not ehci-omap. Correct this
obvious typo.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:36:12 -08:00
Artem Leonenko
0a313c4d24 USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096
Page size for transaction descriptors for CI13XXX has nothing
common with page size from MM. Using platform and configuration
specific PAGE_SIZE is wrong.

Signed-off-by: Artem Leonenko <tikkeri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:32:37 -08:00
Artem Leonenko
7c25a82684 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's
CI13xxx UDC driver doesn't call complete() callback for requests
with flag no_interrupt set. Thus gadget drivers (like g_ether) are
never notifed about successfully (or not) transmitted requests. As
a result in case of g_ether and queued request with no_interrupt=1
fields g_ether is never notifed about sent packets and TX stalls.

Solution: treat no_interrupt flag like all other UDC drivers do and
call complete() callback for all requests.

Signed-off-by: Artem Leonenko <tikkeri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:32:37 -08:00
Artem Leonenko
d9bb9c1820 USB: gadget: update ci13xxx to work with g_ether
There is one nasty scenario when CI13xxx driver fails:
       a) two or more rx requests are queued (g_ether does that)
       b) rx request completed, interrupt fires and ci13xxx dequeues rq
       c) request complete() callback gets called and in turn it calls ep_queue()
               c1) in ep_queue() request gets added to the TAIL of the rx queue list
       d) ep gets primed with rq from (b)
       e) interrupt fires
       f) request gets popped from queue head for hw dequeue
       G) requets from queue head wasn't enqueued
               g1)  isr_tr_complete_low() doesn't
               enqueue more requests and it doesn't prime EP,
               rx traffic stalls

Solution:
       a) enque queued requests ASAP, i.e. before calling complete() callback.
       b) don't HW enqueue and prime endpoint with recently added request and
       use the oldest request in the queue.

Fixed issues:
       a) ep_queue() may return an error code despite request was successfully
       added to the queue (if _hardware_enqueue() fails)
       b) Added requests are always processed in LIFO order, even if they are
       added in complete() callback
       c) Finally more than two and more queued requests are processed consistently,
       even if they were added in complete() callback

The fix was successfully tested on MIPS based SoC with 4KEc CPU core and
CI13612 USB core. Board successfully boots with NFS root using g_ether
on ci13xxx udc.

Signed-off-by: Artem Leonenko <tikkeri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:32:37 -08:00
Artem Leonenko
6549e8b7f3 USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers
Built-in gadget drivers have NULL-ifed unbind() function. Checking
whether unbind() is NULL will never let any compiled into kernel
driver attach.

Signed-off-by: Artem Leonenko <tikkeri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:32:37 -08:00
Chris Wilson
6714afb108 drm/i915/sdvo: Border and stall select became test bits in gen5
This is even more important as those bits will be moved in future.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-16 21:19:44 +00:00
Taku Izumi
caafa84251 bonding: add the debugfs interface to see RLB hash table
This patch provices the debugfs interface to see RLB hash table
like the following:

# cat /sys/kernel/debug/bonding/bond0/rlb_hash_table
SourceIP        DestinationIP   Destination MAC   DEV
10.124.196.205  10.124.196.205  ff:ff:ff:ff:ff:ff eth4
10.124.196.205  10.124.196.81   00:19:99:XX:XX:XX eth3
10.124.196.205  10.124.196.1    00:21:d8:XX:XX:XX eth0

This is helpful to check if the receive load balancing works as expected.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:05 -08:00
Taku Izumi
411204a5a1 bonding: migrate some macros from bond_alb.c to bond_alb.h
This patch simply migrates some macros from bond_alb.c to bond_alb.h.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:05 -08:00
Dimitris Michailidis
ad6bad3efb cxgb4: NUMA-aware Tx queue allocations
Allocate Tx queue memory on the node indicated by the new
netdev_queue_numa_node_read.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:04 -08:00
Dimitris Michailidis
23d88e1d3e cxgb4: extend VPD parsing
Current code parses the VPD RO section for keywords but makes static
assumptions about the location of the section.  Remove them and parse
the VPD to find it.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:04 -08:00
Joe Perches
005b5717fa cxgb4: add const to static arrays
Patch originally from Joe Perches, unmodified.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:03 -08:00
Dimitris Michailidis
8f3a76769e cxgb4: remove a bitmap
The driver keeps a bitmap of the netdevs it registered so it knows what to
unregister later.  Remove that and look at reg_state instead.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:03 -08:00
Dimitris Michailidis
b1a3c2b698 cxgb4: remove the name field from the adapter structure
Remove a field the driver uses to keep track of the name of the first
netdev it manages to register.  Do this by changing the registration
loop to stop the first time it fails so the first registered device is
trivial to tell.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:02 -08:00
Dimitris Michailidis
ba27816cd8 cxgb4: correct formatting of MSI-X interrupt names
The last byte of the buffer for MSI-X names could not be used due to a
bogus -1.  Also do not explicitly clear the last byte, snprintf will do
the right thing.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:02 -08:00
Dimitris Michailidis
8cd18ac47f cxgb4: allocate more space for MSI-X interrupt names
Currently MSI-X names for netdevs with long names are truncated in
/proc/interrupts due to insufficient space.  Use IFNAMSIZ to size the
needed space.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:01 -08:00
Dimitris Michailidis
118969ed21 cxgb4: print port information after registering each netdev
Print information about each port when its netdev is registered instead
of looping separately over the ports at the end.  The bulk of this patch
is due to indentation change.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:01 -08:00
Dimitris Michailidis
7d5e77aafa cxgb4: distinguish between 1-lane KR/KX and 4-lane KR/KX/KX4 ports
And fix the supported flags ethtool reports for the two cases.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:00 -08:00
Dimitris Michailidis
a57cabe09f cxgb4: set the number of queues before device registration
The number of queues is known early, move the calls to
netif_set_real_num_[rt]x_queues before register_netdev.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:16:00 -08:00
Dimitris Michailidis
ec16400823 cxgb4: do not read the clock frequency from VPD
No need to read the clock frequency from VPD, we already get it a bit
later from FW, after any potential adjustments.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:15:59 -08:00
Dimitris Michailidis
ef306b50b9 cxgb4: enable PCIe relaxed ordering
Enable relaxed ordering for descriptor reads and packet I/O.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:15:59 -08:00
Vladislav Zolotarov
986d730a69 bnx2x: update version to 1.62.00-2
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:15:58 -08:00
Vladislav Zolotarov
5928c8baf6 bnx2x: replace FW to 6.2.5
Includes FCoE releated fixes in FW flows

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:15:57 -08:00
Vladislav Zolotarov
bcab15c5d7 bnx2x: Add DCB/PFC support - link layer
Add appropriate HW DCB/PFC configuration

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:15:55 -08:00
Vladislav Zolotarov
e4901dde12 bnx2x: add DCB support
Adding DCB initialization and handling on 57712 FW/HW

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:15:55 -08:00
Vladislav Zolotarov
8307fa3e86 bnx2x: add a select queue callback
This callback required to allow FCoE traffic to be
sent on separate priority queue from other L2 traffic,
which is managed by PFC in HW.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:15:54 -08:00
Vladislav Zolotarov
ec6ba94521 bnx2x: add FCoE ring
Includes new driver structures and FW/HW configuration for FCoE ring

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:15:54 -08:00
Thomas Gleixner
35c64e5d13 drivers: serial: apbuart: Handle OF failures gracefully
The apbuart driver depends on OF and relies on everything being
available. So if it's probed on a platform which has OF support, but
no device tree is available it crashes. Triggered by the upcoming x86
OF support in randconfig testing.

Further it's inconsistent vs. the probing and exiting from the
of_match loop.

Make it robust and consistent:

 - check the availablility of OF nodes before dereferencing
 - return -ENODEV when the device tree lookup fails
 - return -ENODEV when no uart port configuration is found
 - return -ENODEV when invalid uart port configuration is found

Remove the enum_done check while at it. Driver init functions are only
called once. Remove the pointless vendor and device queries as well.

Reported-by: Ingo Molnar <mingo.elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:14:32 -08:00
Govindraj.R
3f960dbb9d Serial: Avoid unbalanced IRQ wake disable during resume
To avoid unbalanced IRQ wake disable, ensure that wakeups are disabled
only when wakeups have been successfully enabled.
Tested on OMAP3630SDP/ZOOM3.

Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Reported-by: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:14:32 -08:00
Tomoya MORINAGA
1c5189976f pch_uart : fix warnings for 64bit compile
Fix the following warnings
drivers/serial/pch_uart.c: In function ‘dma_handle_rx’:
drivers/serial/pch_uart.c:685:24: warning: cast from pointer to integer of different size
drivers/serial/pch_uart.c: In function ‘dma_handle_tx’:
drivers/serial/pch_uart.c:778:23: warning: cast from pointer to integer of different size
drivers/serial/pch_uart.c: In function ‘pch_uart_init_port’:
drivers/serial/pch_uart.c:1289:20: warning: cast to pointer from integer of different size
drivers/serial/pch_uart.c: In function ‘pch_uart_exit_port’:
drivers/serial/pch_uart.c:1328:2: warning: cast from pointer to integer of different size

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Reported-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:14:31 -08:00
Ken Mills
093d804611 n_gsm: gsm_data_alloc buffer allocation could fail and it is not being checked
gsm_data_alloc buffer allocation could fail and it is not being checked.

Add check for allocated buffer and return if the buffer allocation
fails.

Signed-off-by: Ken Mills <ken.k.mills@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:03:13 -08:00
Ken Mills
be7a7411d6 n_gsm: Fix message length handling when building header
Fix message length handling when building header

When the message length is greater than 127, the length field in the header
is built incorrectly. According to the spec, when the length is less than 128
the length field is a single byte formatted as: bbbbbbb1. When it is greater
than 127 then the field is two bytes of the format: bbbbbbb0 bbbbbbbb.

Signed-off-by: Ken Mills <ken.k.mills@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 13:03:12 -08:00
Mario Kleiner
49b14a5ca2 drm/i915: Add Guess-o-matic for pageflip timestamping.
This patch changes the strategy for pageflip completion
timestamping. It detects if the pageflip completion
routine gets executed before or after drm_handle_vblank,
and thereby decides if the returned vblank count and
timestamp must be incremented by 1 frame(duration) or
not. It compares the current system time at invocation
against the current vblank timestamp. If the difference
is more than 0.9 video refresh interval durations then
it assumes the vblank timestamp and count are outdated
and need to be incremented and does so. Otherwise it
assumes a delayed pageflip irq and doesn't correct
the timestamp and count.

Advantage of this patch: Pageflip timestamping becomes
more robust against implementation errors and is
maintenance free for future GPU's.

Disadvantage: A few dozen (hundred?) nsecs extra
time spent in pageflip irq handler for each flip,
compared to hard-coded per-gpu settings?

Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-16 21:02:26 +00:00
Mario Kleiner
0af7e4dff5 drm/i915: Add support for precise vblank timestamping (v2)
v2: Change IS_IRONLAKE to IS_GEN5 to adapt to 2.6.37

This patch adds new functions for use by the drm core:

.get_vblank_timestamp() provides a precise timestamp
for the end of the most recent (or current) vblank
interval of a given crtc, as needed for the DRI2
implementation of the OML_sync_control extension.
It is a thin wrapper around the drm function
drm_calc_vbltimestamp_from_scanoutpos() which does
almost all the work.

.get_scanout_position() provides the current horizontal
and vertical video scanout position and "in vblank"
status of a given crtc, as needed by the drm for use by
drm_calc_vbltimestamp_from_scanoutpos().

The patch modifies the pageflip completion routine
to use these precise vblank timestamps as the timestamps
for pageflip completion events.

This code has been only tested on a HP-Mini Netbook with
Atom processor and Intel 945GME gpu. The codepath for
(IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev)) gpu's
has not been tested so far due to lack of hardware.

Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-16 21:02:24 +00:00
Chris Wilson
d8c58fabd7 Merge remote branch 'airlied/drm-core-next' into drm-intel-next 2010-12-16 21:02:15 +00:00
Ben Hutchings
f88a4a9b65 bonding/vlan: Fix mangled NAs on slaves without VLAN tag insertion
bond_na_send() attempts to insert a VLAN tag in between building and
sending packets of the respective formats.  If the slave does not
implement hardware VLAN tag insertion then vlan_put_tag() will mangle
the network-layer header because the Ethernet header is not present at
this point (unlike in bond_arp_send()).

Fix this by adding the tag out-of-line and relying on
dev_hard_start_xmit() to insert it inline if necessary.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 12:43:22 -08:00
Ben Hutchings
ffa95ed50f bonding: Change active slave quietly when bond is down
bond_change_active_slave() may be called when a slave is added, even
if the bond has not been brought up yet.  It may then attempt to send
packets, and further it may use mcast_work which is uninitialised
before the bond is brought up.  Add the necessary checks for
netif_running(bond->dev).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 12:43:22 -08:00
Ben Hutchings
8387451e55 bonding/vlan: Remove redundant VLAN tag insertion logic
A bond may have a mixture of slave devices with and without hardware
VLAN tag insertion capability.  Therefore it always claims this
capability and performs software VLAN tag insertion if the slave does
not.

Since commit 7b9c609037, this has
also been done by dev_hard_start_xmit().  The result is that VLAN-
tagged skbs are now double-tagged when transmitted through slave
devices without hardware VLAN tag insertion!

Remove the now-redundant logic from bond_dev_queue_xmit().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 12:43:21 -08:00
Ken Kawasaki
42dccd1f75 axnet_cs: move id (0x1bf, 0x2328) to axnet_cs
axnet_cs:
    Accton EN2328 or compatible (id: 0x01bf, 0x2328) uses Asix chip.
    So it works better with axnet_cs instead of pcnet_cs.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 12:39:06 -08:00
Hank Janssen
45241e50e3 Staging: hv: Use only one txf buffer per channel and kmalloc/GFP_KERNEL on initialize
Correct issue with not checking kmalloc return value.
This fix now only uses one receive buffer for all hv_utils
channels, and will do only one kmalloc on init and will return
with a -ENOMEM if kmalloc fails on initialize.

And properly clean up memory on failure.

Thanks to Evgeniy Polyakov <zbr@ioremap.net> for pointing this out.
And thanks to Jesper Juhl <jj@chaosbits.net> and Ky Srinivasan
<ksrinivasan@novell.com> for suggesting a better implementation of
my original patch.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Ky Srinivasan <ksrinivasan@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:37:51 -08:00
Timo Teräs
244ba85606 staging: hv: remove unneeded osd_schedule_callback
No one calls it anymore, so remove it.

Reviewed-By: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:35:15 -08:00
Timo Teräs
4b2f9abea5 staging: hv: convert channel_mgmt.c to not call osd_schedule_callback
The additional abstraction is unneeded.

The three calls are assumed to not be pending simultaneously:
 - vmbus_onoffer queues work exactly once when a new channel is
   created, the channel is not attached to lists until the work
   is executed
 - vmbus_onoffer_rescind is received only when the channel is
   active it is enough to process the work once
 - free_channel is called exactly once when the channel is getting
   destroyed; I assumed that vmbus_process_rescind_offer cannot be
   pending while free_channel is called

Reviewed-By: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:35:15 -08:00
Timo Teräs
bf6506f60c staging: hv: convert vmbus_on_msg_dpc to not call osd_schedule_callback
The additional abstraction is unneeded. This also fixes a sleeping
while atomic issue as osd_schedule_callback can sleep which is
not allowed for vmbus_on_msg_dpc running in a tasklet.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16701

Reviewed-By: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:35:14 -08:00
Joe Perches
f4528696d8 staging: brcm80211: Fix WL_<type> logging macros
These macros use the equivalent of "#define WL_<type>(x) printk x"
which requires an extra level of parentheses.

Convert the macros to use the normal WL_<type>(fmt, args...) style
and remove the extra parentheses from the uses.

Add format argument verification using no_printk as appropriate.
Couple of spelling typo fixes in the formats and argument alignment
at the same time. Also coalesced long formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:25:37 -08:00
Hillf Danton
af3e5bd5f6 bonding: Fix slave selection bug.
The returned slave is incorrect, if the net device under check is not
charged yet by the master.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 12:24:02 -08:00
Michael Hennerich
12b9d5bf76 Staging: IIO: DDS: AD9833 / AD9834 driver
Changes since RFC/v1:
IIO: Apply list review feedback

Apply list review feedback:
	Rename attributes to fit IIO convention used in other drivers.
	Fix typos.
	Provide ddsX_out_enable as opposed to ddsX_out_disable.
	Use proper __devexit marking.
	Use strict_strtoul() to avoid negatives.

Changes since v2:
IIO: ad9834.c: Apply more list review feedback

	Update use of dds convenience macros.
	Fix tabbing.
	Remove superfluous brackets.
	Keep output disabled after probe.
	Remove unnecessary code.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:23:03 -08:00
Michael Hennerich
4851d97d87 Staging: IIO: dds.h convenience macros
Changes since RFC/v1:
IIO: Apply list review feedback

Apply list review feedback:
	Rename attributes to fit IIO convention used in other drivers.
	Provide ddsX_out_enable as opposed to ddsX_out_disable.
	Fix typos.

Changes since v2:
IIO: dds.h: Apply more list review feedback

	Fix mixture of X and [n] notation for indices.
	Remove duplicated descriptions.
	Add store methods to some dds convenience macros.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:23:03 -08:00
Michael Hennerich
f8ce33bbd5 Staging: IIO: Direct digital synthesis abi documentation
Changes since RFC/v1:
IIO: Apply list review feedback:

Apply list review feedback:
	Restructure documentation according to list feedback.
	Rename attributes to fit IIO convention used in other drivers.
	Fix typos.
	Provide ddsX_out_enable as opposed to ddsX_out_disable

Changes since v2:
IIO: sysfs-bus-iio-dds: Apply more list review feedback

	Fix mixture of X and [n] notation for indices.
	Fix some wording in the descriptions.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:23:03 -08:00
Larry Finger
8a09d6d80c rtlwifi: Switch locking from semaphores to mutexes
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 15:22:32 -05:00
Bruno Randolf
f15a4bb263 ath5k: Fix survey
The old survey implementation was broken and returned nonsense data.

Clear cycle counters and survey data on reset. Since the cycle counters easily
overflow it's better to keep a local version of collected survey data (in ms
resolution, instead of clockrate) and update this every time survey is
retrieved. If survey is retrieved often enough to avoid cycle counter overflows
this works fine, otherwise we could update survey more often, like ath9k does.
Still only the survey for the current channel is kept.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 15:22:32 -05:00
Larry Finger
4aea248dd7 rtl8192ce: Fix build on powerpc
After merge of the rtl8192ce driver, a powerpc build fails with:

drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c: In function 'rtl92c_init_sw_vars':
drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:76: error: implicit declaration of function 'vmalloc'
drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:76: warning: cast to pointer from integer of different size
drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c: In function 'rtl92c_deinit_sw_vars':
drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:91: error: implicit declaration of function 'vfree'

The problem is fixed by explicitly including the appropriate header.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 15:22:32 -05:00