[ Upstream commit 0750649b52 ]
Compare the whole v4l2_bt_timings struct, not just the width/height when
setting new timings. Timings with the same resolution and different
pixelclock can now be properly set.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c158b5a570 ]
Commit 0d6ccfe6b3 ("selftests: drv-net: rss_ctx: check for all-zero keys")
added a skip exception if NIC has fewer than 3 queues enabled,
but it's just constructing the object, it's not actually rising
this exception.
Before:
# Exception| net.lib.py.utils.CmdExitFailure: Command failed: ethtool -X enp1s0 equal 3 hkey d1:cc:77:47:9d:ea:15:f2:b9:6c:ef:68:62:c0:45:d5:b0:99:7d:cf:29:53:40:06:3d:8e:b9:bc:d4:70:89:b8:8d:59:04:ea:a9:c2:21:b3:55:b8:ab:6b:d9:48:b4:bd:4c:ff:a5:f0:a8:c2
not ok 1 rss_ctx.test_rss_key_indir
After:
ok 1 rss_ctx.test_rss_key_indir # SKIP Device has fewer than 3 queues (or doesn't support queue stats)
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827173558.3259072-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb53e8f09f ]
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The original code did not set 'zap_available' to false if
of_address_to_resource() failed which seems like an oversight.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662275/
Link: https://lore.kernel.org/r/20250703183442.2073717-1-robh@kernel.org
[DB: dropped part related to VRAM, no longer applicable]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d47b4f084 ]
A partitioned system configured with only one package and one compute
die, warning will be generated for duplicate sysfs entry. This typically
occurs during the platform bring-up phase.
Partitioned systems expose dies, equivalent to TPMI compute domains,
through the CPUID. Each partitioned system must contains at least one
compute die per partition, resulting in a minimum of two dies per
package. Hence the function topology_max_dies_per_package() returns at
least two, and the condition "topology_max_dies_per_package() > 1"
prevents the creation of a root domain.
In this case topology_max_dies_per_package() will return 1 and root
domain will be created for partition 0 and a duplicate sysfs warning
for partition 1 as both partitions have same package ID.
To address this also check for non zero partition in addition to
topology_max_dies_per_package() > 1.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250819211034.3776284-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14a4aca568 ]
When beacon loss happens or the RSSI drops, trigger MLO scan only
if not in EMLSR. The link switch was meant to be done when we are
not in EMLSR and we can try to switch to a better link.
If in EMLSR, we exit first and then trigger MLO scan.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.f6ae8e3882cf.I60901c16487371b8e62019bd0bf25c45ab23752f@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1161b1863 ]
Upon experiencing a PCI error, fbnic reset the device to recover from
the failure. Reset the hardware stats as part of the device reset to
ensure accurate stats reporting.
Note that the reset is not really resetting the aggregate value to 0,
which may result in a spike for a system collecting deltas in stats.
Rather, the reset re-latches the current value as previous, in case HW
got reset.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97bcc5b6f4 ]
This patch fixes an issue where two different flows on the same RXq
produce the same hash resulting in continuous flow overwrites.
Flow #1: A packet for Flow #1 comes in, kernel calls the steering
function. The driver gives back a filter id. The kernel saves
this filter id in the selected slot. Later, the driver's
service task checks if any filters have expired and then
installs the rule for Flow #1.
Flow #2: A packet for Flow #2 comes in. It goes through the same steps.
But this time, the chosen slot is being used by Flow #1. The
driver gives a new filter id and the kernel saves it in the
same slot. When the driver's service task runs, it runs through
all the flows, checks if Flow #1 should be expired, the kernel
returns True as the slot has a different filter id, and then
the driver installs the rule for Flow #2.
Flow #1: Another packet for Flow #1 comes in. The same thing repeats.
The slot is overwritten with a new filter id for Flow #1.
This causes a repeated cycle of flow programming for missed packets,
wasting CPU cycles while not improving performance. This problem happens
at higher rates when the RPS table is small, but tests show it still
happens even with 12,000 connections and an RPS size of 16K per queue
(global table size = 144x16K = 64K).
This patch prevents overwriting an rps_dev_flow entry if it is active.
The intention is that it is better to do aRFS for the first flow instead
of hurting all flows on the same hash. Without this, two (or more) flows
on one RX queue with the same hash can keep overwriting each other. This
causes the driver to reprogram the flow repeatedly.
Changes:
1. Add a new 'hash' field to struct rps_dev_flow.
2. Add rps_flow_is_active(): a helper function to check if a flow is
active or not, extracted from rps_may_expire_flow(). It is further
simplified as per reviewer feedback.
3. In set_rps_cpu():
- Avoid overwriting by programming a new filter if:
- The slot is not in use, or
- The slot is in use but the flow is not active, or
- The slot has an active flow with the same hash, but target CPU
differs.
- Save the hash in the rps_dev_flow entry.
4. rps_may_expire_flow(): Use earlier extracted rps_flow_is_active().
Testing & results:
- Driver: ice (E810 NIC), Kernel: net-next
- #CPUs = #RXq = 144 (1:1)
- Number of flows: 12K
- Eight RPS settings from 256 to 32768. Though RPS=256 is not ideal,
it is still sufficient to cover 12K flows (256*144 rx-queues = 64K
global table slots)
- Global Table Size = 144 * RPS (effectively equal to 256 * RPS)
- Each RPS test duration = 8 mins (org code) + 8 mins (new code).
- Metrics captured on client
Legend for following tables:
Steer-C: #times ndo_rx_flow_steer() was Called by set_rps_cpu()
Steer-L: #times ice_arfs_flow_steer() Looped over aRFS entries
Add: #times driver actually programmed aRFS (ice_arfs_build_entry())
Del: #times driver deleted the flow (ice_arfs_del_flow_rules())
Units: K = 1,000 times, M = 1 million times
|-------|---------|------| Org Code |---------|---------|
| RPS | Latency | CPU | Add | Del | Steer-C | Steer-L |
|-------|---------|------|--------|--------|---------|---------|
| 256 | 227.0 | 93.2 | 1.6M | 1.6M | 121.7M | 267.6M |
| 512 | 225.9 | 94.1 | 11.5M | 11.2M | 65.7M | 199.6M |
| 1024 | 223.5 | 95.6 | 16.5M | 16.5M | 27.1M | 187.3M |
| 2048 | 222.2 | 96.3 | 10.5M | 10.5M | 12.5M | 115.2M |
| 4096 | 223.9 | 94.1 | 5.5M | 5.5M | 7.2M | 65.9M |
| 8192 | 224.7 | 92.5 | 2.7M | 2.7M | 3.0M | 29.9M |
| 16384 | 223.5 | 92.5 | 1.3M | 1.3M | 1.4M | 13.9M |
| 32768 | 219.6 | 93.2 | 838.1K | 838.1K | 965.1K | 8.9M |
|-------|---------|------| New Code |---------|---------|
| 256 | 201.5 | 99.1 | 13.4K | 5.0K | 13.7K | 75.2K |
| 512 | 202.5 | 98.2 | 11.2K | 5.9K | 11.2K | 55.5K |
| 1024 | 207.3 | 93.9 | 11.5K | 9.7K | 11.5K | 59.6K |
| 2048 | 207.5 | 96.7 | 11.8K | 11.1K | 15.5K | 79.3K |
| 4096 | 206.9 | 96.6 | 11.8K | 11.7K | 11.8K | 63.2K |
| 8192 | 205.8 | 96.7 | 11.9K | 11.8K | 11.9K | 63.9K |
| 16384 | 200.9 | 98.2 | 11.9K | 11.9K | 11.9K | 64.2K |
| 32768 | 202.5 | 98.0 | 11.9K | 11.9K | 11.9K | 64.2K |
|-------|---------|------|--------|--------|---------|---------|
Some observations:
1. Overall Latency improved: (1790.19-1634.94)/1790.19*100 = 8.67%
2. Overall CPU increased: (777.32-751.49)/751.45*100 = 3.44%
3. Flow Management (add/delete) remained almost constant at ~11K
compared to values in millions.
Signed-off-by: Krishna Kumar <krikku@gmail.com>
Link: https://patch.msgid.link/20250825031005.3674864-2-krikku@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76186a253a ]
Add a new _fini() routine on the GT TLB invalidation
side to handle this worker cleanup on driver teardown.
v2: Move the TLB teardown to the gt fini() routine called during
gt_init rather than in gt_alloc. This way the GT structure stays
alive for while we reset the TLB state.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-3-stuart.summers@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec813f384b ]
We need to cancel any outstanding work at both suspend
and driver teardown. Move the cancel to hw_fini which
gets called in both cases.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b34e7ed4b ]
[WHY&HOW]
The sink max slice width limitation should be considered for DSC, but
was removed in "refactor DSC cap calculations".
This patch adds it back and takes the valid minimum between the sink and
source.
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3820e9d35 ]
When KFD asks CP to preempt queues, other than preempt CP queues, CP
also requests SDMA to preempt SDMA queues with UNMAP_LATENCY timeout.
Currently queue_preemption_timeout_ms is 9000 ms by default but can be
configured via module parameter. KFD_UNMAP_LATENCY_MS is hard coded as
4000 ms though. This patch ties KFD_UNMAP_LATENCY_MS to
queue_preemption_timeout_ms so in a slow system such as emulator, both
CP and SDMA slowness are taken into account.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a359f0f13 ]
[Why]
For the HW cursor, its current position in the pipe_ctx->stream struct is
not affected by the 180 rotation, i. e. the top left corner is still at
0,0. However, the DPP & HUBP set_cursor_position functions require rotated
position.
The current approach is hard-coded for ODM 2:1, thus it's failing for
ODM 4:1, resulting in a double cursor.
[How]
Instead of calculating the new cursor position relatively to the
viewports, we calculate it using a viewavable clip_rect of each plane.
The clip_rects are first offset and scaled to the same space as the
src_rect, i. e. Stream space -> Plane space.
In case of a pipe split, which divides the plane into 2 or more viewports,
the clip_rect is the union of all the viewports of the given plane.
With the assumption that the viewports in HUBP's set_cursor_position are
in the Plane space as well, it should produce a correct cursor position
for any number of pipe splits.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93aa919ca0 ]
When it only allocates vram without va, which is 0, and a
SVM range allocated stays in this range, the vram allocation
returns failure. It should be skipped for this case from
SVM usage check.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 907813e5d7 ]
Correct the counts of nr_banks and nr_errors
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8442bcad0 ]
By polling, poll ACA bank count to ensure that valid
ACA bank reg info can be obtained
v2: add corresponding delay before send msg to SMU to query mca bank info
(Stanley)
v3: the loop cannot exit. (Thomas)
v4: remove amdgpu_aca_clear_bank_count. (Kevin)
v5: continuously inject ce. If a creation interruption
occurs at this time, bank reg info will be lost. (Thomas)
v5: each cycle is delayed by 100ms. (Tao)
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc8e391067 ]
The pci_endpoint_test tests the 32-bit MSI range. However, the device might
not have all vectors configured. For example, if msi_interrupts is 8 in the
ep function space or if the MSI Multiple Message Capable value is
configured as 4 (maximum 16 vectors).
In this case, do not attempt to run the test to avoid timeouts and directly
return the error value.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-2-christian.bruel@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95d0883ac8 ]
This patch ensures the gt will be awake for the entire duration
of the resume sequences until GuCRC takes over and GT-C6 gets
re-enabled.
Before suspending GT-C6 is kept enabled, but upon resume, GuCRC
is not yet alive to properly control the exits and some cases of
instability and corruption related to GT-C6 can be observed.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4037
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4037
Link: https://lore.kernel.org/r/20250827000633.1369890-3-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 106fc08b30 ]
The pci_endpoint_test tests the entire MSI/MSI-X range, which generates
false errors on platforms that do not support the whole range.
Skip the test in such cases and report accordingly.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-4-christian.bruel@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dbe644248 ]
The original commit be2ff42c5d ("fuse: Use hash table to link
processing request") converted fuse_pqueue->processing to a hash table,
but virtio_fs_enqueue_req() was not updated to use it correctly.
So use fuse_pqueue->processing as a hash table, this make the code
more coherent
Co-developed-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ca1b31118 ]
This is slightly tricky, since the VFS uses non-zeroing allocation to
preserve some fields that are left in a consistent state.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250818083224.229-1-luochunsheng@ustc.edu/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee3ae27721 ]
The test currently modifies the HDS settings and doesn't restore them.
This may cause subsequent tests to fail (or pass when they should not).
Add defer()ed reset handling.
Link: https://patch.msgid.link/20250825175939.2249165-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0f849c1cc ]
fixed_phy_register() creates and registers the phy_device. To be
symmetric, we should not only unregister, but also free the phy_device
in fixed_phy_unregister(). This allows to simplify code in users.
Note wrt of_phy_deregister_fixed_link():
put_device(&phydev->mdio.dev) and phy_device_free(phydev) are identical.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/ad8dda9a-10ed-4060-916b-3f13bdbb899d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d738e1be2b ]
The commit 9ab440a9d0 ("drm/xe/ptl: L3bank mask is not
available on the media GT") added a workaround to ignore
the fuse register that L3 bank availability as it did not
contain valid values. Same is true for WCL therefore extend
the workaround to cover it.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://lore.kernel.org/r/20250822002512.1129144-1-chaitanya.kumar.borah@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90fdcf5f89 ]
Userspace should be notified after setting the device as wedged.
Re-order function calls to set gt wedged before sending uevent.
Cc: Matthew Brost <matthew.brost@intel.com>
Suggested-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-4-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93ccf3f2f2 ]
Device can be unbound, so driver must also release memory for the wakeup
source.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-2-7af77802cbea@linaro.org/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f982d55f8 ]
Device can be unbound, so driver must also release memory for the wakeup
source.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-3-7af77802cbea@linaro.org/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78b6a991eb ]
Device can be unbound, so driver must also release memory for the wakeup
source. Do not use devm interface, because it would change the order of
cleanup.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-1-7af77802cbea@linaro.org/
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6477ee38c ]
Eliminate the use of static variables within the log pull implementation
to resolve a race condition and prevent data gaps when pulling logs from
multiple controllers in parallel, ensuring each operation is properly
isolated.
Signed-off-by: Francisco Gutierrez <frankramirez@google.com>
Link: https://lore.kernel.org/r/20250723183543.1443301-1-frankramirez@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 829fa1582b ]
Firmware can enter a transient fault while creating operational queues.
The driver fails the load immediately.
Add a retry loop that checks controller status and history bit after
queue creation. If either indicates a fault, retry init up to a set
limit before failing.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7b2176e30 ]
I/Os can race with controller reset and fail.
Block requests at the mid layer when reset starts using
scsi_host_block(), and resume with scsi_host_unblock() after reset
completes.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebea22c7f1 ]
When Wi-Fi is scanning at 2.4GHz, PTA will abort almost all the BT request.
Once the Wi-Fi slot stay too long, BT audio device can not get enough data,
audio glitch will happened. This patch limit 2.4Ghz Wi-Fi slot to 80ms
while Wi-Fi is scanning to avoid audio glitch.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250819034428.26307-5-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6c8e8b7c9 ]
During enclosure reboot or expander reset, firmware may report a link
speed of 0 in "Device Add" events while the link is still coming up.
The driver drops such devices, leaving them missing even after the link
recovers.
Fix this by treating link speed 0 as 1.5 Gbps during device addition so
the device is exposed to the OS. The actual link speed will be updated
later when link-up events arrive.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b8c5fa0cb ]
Currently, ip_extract_route_hint uses RTN_BROADCAST to decide
whether to use the route dst hint mechanism.
This check is too strict, as it prevents directed broadcast
routes from using the hint, resulting in poor performance
during bursts of directed broadcast traffic.
Fix this in ip_extract_route_hint and modify ip_route_use_hint
to preserve the intended behaviour.
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250819174642.5148-2-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e29c30d8d ]
Module aliases are used by userspace to identify the correct module to
load for a detected hardware. The currently supported RPMSG device IDs for
this module include "rpmsg-raw", but the module alias is "rpmsg_chrdev".
Use the helper macro MODULE_DEVICE_TABLE(rpmsg) to export the correct
supported IDs. And while here, to keep backwards compatibility we also add
the other ID "rpmsg_chrdev" so that it is also still exported as an alias.
This has the side benefit of adding support for some legacy firmware
which still uses the original "rpmsg_chrdev" ID. This was the ID used for
this driver before it was upstreamed (as reflected by the module alias).
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Tested-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20250619205722.133827-1-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5a2826cd5 ]
The IPU6 ISYS driver supported metadata formats but was missing correct
embedded data type in the receiver configuration. Add it now.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc757dc157 ]
GPD devices originally used BMI160 sensors with the "BMI0160" PNP ID.
When they switched to BMI260 sensors in newer hardware, they reused
the existing Windows driver which accepts both "BMI0160" and "BMI0260"
IDs. Consequently, they kept "BMI0160" in DSDT tables for new BMI260
devices, causing driver mismatches in Linux.
1. GPD updated BIOS v0.40+[1] for newer devices to report "BMI0260" for
BMI260 sensors to avoid loading the bmi160 driver on Linux. While this
isn't Bosch's VID;
2. Bosch's official Windows driver uses "BMI0260" as a compatible ID
3. We're seeing real devices shipping with "BMI0260" in DSDT
The DSDT excerpt of GPD G1619-04 with BIOS v0.40:
Scope (_SB.I2CC)
{
Device (BMA2)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "BMI0260") // _HID: Hardware ID
Name (_CID, "BMI0260") // _CID: Compatible ID
Name (_DDN, "Accelerometer") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x0069, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CC",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.I2CC.BMA2._CRS.RBUF */
}
# omit some noise
}
}
Link: http://download.softwincn.com/WIN%20Max%202024/Max2-7840-BIOS-V0.41.zip#1
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20250821-bmi270-gpd-acpi-v4-1-5279b471d749@uniontech.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd4aa243f1 ]
Add limitation on tx_max_coalesced_frames_irq as 0 ~ 65535, because
'wx->tx_work_limit' is declared as a member of type u16.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250821023408.53472-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5efa824920 ]
At least for panel-bridges, the atomic_enable call is defined as being
called right after the preceding element in the display pipe is enabled.
It is also stated that "The bridge can assume that the display pipe (i.e.
clocks and timing signals) feeding it is running when this callback is
called"
This means the DSI controller driving this display would have already
switched over to video-mode from command mode and thus dcs functions
should not be called anymore at this point.
This caused a non-working display for me, when trying to enable
the rk3576 dsi controller using a display using this controller.
Therefore move the display_on/off calls the more appropriate
prepare/unprepare callbacks.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250707164906.1445288-3-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c66eba502 ]
The prepare function turns on the power-supply regulator first, when
preparing the display. But in an error case, just returns the error
code, but does not power off the regulator again, fix that.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250707164906.1445288-2-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2515d2b9ab ]
There are two registers filled in when reading data from
pcode besides the mailbox itself. Currently, we allow a NULL
value for the second of these two (data1) and assume the first
is defined. However, many of the routines that are calling
this function assume that pcode will ignore the value being
passed in and so leave that first value (data0) defined but
uninitialized. To be safe, make sure this value is always
initialized to something (0 generally) in the event pcode
behavior changes and starts using this value.
v2: Fix sob/author
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250819201054.393220-1-stuart.summers@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02614eee26 ]
idpf has a limit on number of scatter-gather frags
that can be used per segment.
Currently, idpf_tx_start() checks if the limit is hit
and forces a linearization of the whole packet.
This requires high order allocations that can fail
under memory pressure. A full size BIG-TCP packet
would require order-7 alocation on x86_64 :/
We can move the check earlier from idpf_features_check()
for TSO packets, to force GSO in this case, removing the
cost of a big copy.
This means that a linearization will eventually happen
with sizes smaller than one MSS.
__idpf_chk_linearize() is renamed to idpf_chk_tso_segment()
and moved to idpf_lib.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Reviewed-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Brian Vazquez <brianvv@google.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250818195934.757936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7bd721580 ]
The NIX block receives traffic from multiple channels, including:
MAC block (RPM)
Loopback module (LBK)
CPT block
RPM
|
-----------------
LBK --| NIX |
-----------------
|
CPT
Due to a hardware errata, CN10k and earlier Octeon silicon series,
the hardware may incorrectly assert XOFF on certain channels during
reset. As a workaround, a write operation to the NIX_AF_RX_CHANX_CFG
register can be performed to broadcast XON signals on the affected
channels
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820064625.1464361-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aec0b6a6b ]
Just add fixed struct size validations for UAC2 and UAC3 effect
units. The descriptor has a variable-length array, so it should be
validated with a proper function later once when the unit is really
parsed and used by the driver (currently only referred partially for
the input terminal parsing).
Link: https://patch.msgid.link/20250821151751.12100-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 706c3c02ee ]
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Make the following two changes:
(1) Replace -ENOMEM with -ENOSPC in max3100_probe().
(2) Just return -ENOMEM instead in max310x_probe().
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250819120927.607744-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5be7cb805b ]
VFs of the P7 chip family created by Hyper-V will have the device ID of
0x181b.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250819163919.104075-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
