Remove "regulator-ramp-delay-scale" property which is both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305224952.2995841-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main and bulk of the addition this time is the support for the Arm
reference Morello System Development Platform (SDP).
The Morello architecture is an experimental extension to Armv8.2-A,
enhancing the AArch64 execution state with capabilities for fine-grained
memory protection and scalable software compartmentalization. However
these changes doesn't add any of the support for security enhancements.
This is mainly adding device tree support for Morello SDP.
The platform iteslf is shipped with ACPI firmware. However, since the
ACPI bindings for GPU, DPU, I2C, I2S,..etc are not well defined or not
provided in the shipped ACPI firmware, there is a need for the device
tree as alternative for the developers focusing on those features.
The CPU is called rainier, the architecture is Morello and the platform
is Morello SDP board. There is FVP equivalent of the same though they
are not completely in feature parity with the real hardware.
These changes provide the initial support for Morello SDP and FVP
platforms.
Apart from this, we have an update to add support for secondary cores
on Corstone1000 FVP platform.
-----BEGIN PGP SIGNATURE-----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=QVaZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Pf5p
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 FVP/Vexpress/Juno updates for v6.15
The main and bulk of the addition this time is the support for the Arm
reference Morello System Development Platform (SDP).
The Morello architecture is an experimental extension to Armv8.2-A,
enhancing the AArch64 execution state with capabilities for fine-grained
memory protection and scalable software compartmentalization. However
these changes doesn't add any of the support for security enhancements.
This is mainly adding device tree support for Morello SDP.
The platform iteslf is shipped with ACPI firmware. However, since the
ACPI bindings for GPU, DPU, I2C, I2S,..etc are not well defined or not
provided in the shipped ACPI firmware, there is a need for the device
tree as alternative for the developers focusing on those features.
The CPU is called rainier, the architecture is Morello and the platform
is Morello SDP board. There is FVP equivalent of the same though they
are not completely in feature parity with the real hardware.
These changes provide the initial support for Morello SDP and FVP
platforms.
Apart from this, we have an update to add support for secondary cores
on Corstone1000 FVP platform.
* tag 'juno-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: corstone1000: Add definitions for secondary CPU cores
MAINTAINERS: Add Vincenzo Frascino as Arm Morello Maintainer
arm64: dts: morello: Add support for fvp dts
arm64: dts: morello: Add support for soc dts
arm64: dts: morello: Add support for common functionalities
dt-bindings: arm-pmu: Add support for ARM Rainier PMU
dt-bindings: arm: Add Rainier compatibility
dt-bindings: arm: Add Morello fvp compatibility
dt-bindings: arm: Add Morello compatibility
arm64: Kconfig: Update description for CONFIG_ARCH_VEXPRESS
Link: https://lore.kernel.org/r/20250304105856.432848-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for the second and third Ethernet interfaces on the Gray
Hawk Single development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V3U and V4M SoCs,
- Add Watchdog and System Controller support for the RZ/G3E SoC and
the RZ/G3E SMARC Carrier-II EVK development board,
- Add initial support for the Yuridenki-Shokai Kakip and MYIR Remi Pi
boards,
- Add support for the spare UART and PMOD serial ports on the RZ/G3S
SMARC Carrier II board,
- Add a CPU Operating Performance Points table for the RZ/G3S SoC,
- Add boot phase tags on R-Car Gen2/3/4 and RZ/G2 boards,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ7iqoAAKCRCKwlD9ZEnx
cCeeAP4lfqvCdfETRHk60SxnQOWX2jROKkZHMugSlT+HgwDc2QD+MXTANw8KZDJh
QC1uLUCqKtCVZZYzuQkI2J+cCOTJAQc=
=hvhx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kd1w
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.15
- Add support for the second and third Ethernet interfaces on the Gray
Hawk Single development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V3U and V4M SoCs,
- Add Watchdog and System Controller support for the RZ/G3E SoC and
the RZ/G3E SMARC Carrier-II EVK development board,
- Add initial support for the Yuridenki-Shokai Kakip and MYIR Remi Pi
boards,
- Add support for the spare UART and PMOD serial ports on the RZ/G3S
SMARC Carrier II board,
- Add a CPU Operating Performance Points table for the RZ/G3S SoC,
- Add boot phase tags on R-Car Gen2/3/4 and RZ/G2 boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
ARM: dts: renesas: r9a06g032: Fix UART dma channel order
arm64: dts: renesas: rzg2: Add boot phase tags
arm64: dts: renesas: rcar: Add boot phase tags
ARM: dts: renesas: rcar-gen2: Add boot phase tags
arm64: dts: renesas: white-hawk-csi-dsi: Use names for CSI-2 data line orders
arm64: dts: renesas: ulcb/kf: Use TDM Split Mode for capture
arm64: dts: renesas: Add initial support for MYIR Remi Pi
arm64: dts: renesas: r9a08g045: Add OPP table
arm64: dts: renesas: r9a09g057: Enable SYS node
arm64: dts: renesas: r9a09g047: Add SYS node
arm64: dts: renesas: r9a08g045: Enable SYS node
arm64: dts: renesas: r8a779f0: Disable rswitch ports by default
arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
arm64: dts: renesas: r8a779g0: Restore sort order
arm64: dts: renesas: s4sk: Fix ethernet0 alias for rswitch
arm64: dts: renesas: spider-ethernet: Add ethernetN aliases for rswitch
arm64: dts: renesas: s4sk: Access rswitch ports via phandles
arm64: dts: renesas: spider-ethernet: Access rswitch ports via phandles
...
Link: https://lore.kernel.org/r/cover.1740156747.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Document support for the Yuridenki-Shokai Kakip (based on RZ/V2H)
and MYIR Remi Pi (based on RZ/G2L) boards,
- Document support for the RZ/G3E System Controller.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ7imoQAKCRCKwlD9ZEnx
cPn9AQD9JqhrtUsZ5UYZAGyfDc2uQBZ5Hf4IeGdqhrJ9lRs9KwD/bmi5bvOKXIvs
cePIceEYPP4i3BmEwUxvkfe/ydlRpAM=
=9m5J
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rnqR
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.15
- Document support for the Yuridenki-Shokai Kakip (based on RZ/V2H)
and MYIR Remi Pi (based on RZ/G2L) boards,
- Document support for the RZ/G3E System Controller.
* tag 'renesas-dt-bindings-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document MYIR Remi Pi board
dt-bindings: soc: renesas: Add RZ/G3E variant SYS binding
dt-bindings: soc: renesas: Document Yuridenki-Shokai Kakip board
dt-bindings: vendor-prefixes: Add Yuridenki-Shokai Co. Ltd.
dt-bindings: soc: renesas: Document more Renesas RZ/V2H SoC variants
Link: https://lore.kernel.org/r/cover.1740156745.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Assing the right NPE for EthA
- Fix up erroneous PCI mappings on WG302
- Add LEDs and keys on GPIO to WG302
-----BEGIN PGP SIGNATURE-----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=njTo
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QAYE
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
Some minor IXP4xx updates for v6.15:
- Assing the right NPE for EthA
- Fix up erroneous PCI mappings on WG302
- Add LEDs and keys on GPIO to WG302
* tag 'ixp4xx-dts-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: ixp4xx: Add Netgear WG302 v1 GPIOs
ARM: dts: ixp4xx: Fix up PCI on WG302
ARM: dts: Properly assign NPE to ethA
Link: https://lore.kernel.org/r/CACRpkdbi_A_RCufEZSk0cEoQ_H-s0VLGUzJ9zPQECSvsUP7-dQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add cpu{1-3} device nodes to the corstone1000 device tree to enable the
support for secondary CPU cores.
This update facilitates symmetric multiprocessing (SMP) support on the
corstone1000 Fixed Virtual Platform (FVP), allowing the secondary cores
to be properly initialised and utilised.
Only FVP platform will have SMP support and hence the secondary cpu
definitions are not added to corstone1000.dtsi.
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Message-Id: <20250303170012.469576-1-hugues.kambampiana@arm.com>
(sudeep.holla: Added psci enable-method for cpu0)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Morello architecture is an experimental extension to Armv8.2-A,
which extends the AArch64 state with the principles proposed in
version 7 of the Capability Hardware Enhanced RISC Instructions
(CHERI) ISA.
Introduce Morello fvp dts.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Message-Id: <20250221180349.1413089-10-vincenzo.frascino@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Morello architecture is an experimental extension to Armv8.2-A,
which extends the AArch64 state with the principles proposed in
version 7 of the Capability Hardware Enhanced RISC Instructions
(CHERI) ISA.
Introduce Morello SoC dts.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Message-Id: <20250221180349.1413089-9-vincenzo.frascino@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Morello architecture is an experimental extension to Armv8.2-A,
which extends the AArch64 state with the principles proposed in
version 7 of the Capability Hardware Enhanced RISC Instructions
(CHERI) ISA.
The Morello Platform (soc) and the Fixed Virtual Platfom (fvp) share
some functionalities that have conveniently been included in
morello.dtsi to avoid duplication.
Introduce morello.dtsi.
Note: Morello fvp will be introduced with a future patch series.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Message-Id: <20250221180349.1413089-8-vincenzo.frascino@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add support for the ARM Rainier CPU core PMU.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Message-Id: <20250221180349.1413089-6-vincenzo.frascino@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add compatibility to Arm Morello System Development Platform.
Note: Morello is at the same time the name of an Architecture [1], an SoC
[2] and a Board [2].
To distinguish in between Architecture/SoC and Board we refer to the first
as arm,morello and to the second as arm,morello-sdp.
[1] https://developer.arm.com/Architectures/Morello
[2] https://www.morello-project.org/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Message-Id: <20250221180349.1413089-3-vincenzo.frascino@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Update the description and contextually the help text of
CONFIG_ARCH_VEXPRESS to reflect the inclusion of all ARM Ltd Platforms.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-Id: <20250221180349.1413089-2-vincenzo.frascino@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Adds device tree entries for the touchbar digitizer
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250225-z2-dts-v1-1-df101a7c17c8@gmail.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to describe various node usage during
boot phases with DT. Add bootph-all for all nodes that are used in the
bootloader on Renesas RZ/G2 SoCs.
All SoC require CPG clock and its input clock, RST Reset, PFC pin
control and PRR ID register access during all stages of the boot
process, those are marked using bootph-all property, and so is the SoC
bus node which contains these IP.
Each board console UART is also marked as bootph-all to make it
available in all stages of the boot process.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250209180616.160253-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to describe various node usage during
boot phases with DT. Add bootph-all for all nodes that are used in the
bootloader on Renesas R-Car SoCs.
All SoC require CPG clock and its input clock, RST Reset, PFC pin
control and PRR ID register access during all stages of the boot
process, those are marked using bootph-all property, and so is the SoC
bus node which contains these IP.
Each board console UART is also marked as bootph-all to make it
available in all stages of the boot process.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250209180616.160253-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to describe various node usage during
boot phases with DT. Add bootph-all for all nodes that are used in the
bootloader on Renesas R-Car Gen2 SoCs.
All SoC require CPG clock and its input clock, RST Reset, PFC pin
control and PRR ID register access during all stages of the boot
process, those are marked using bootph-all property, and so is the SoC
bus node which contains these IP.
Each board console UART is also marked as bootph-all to make it
available in all stages of the boot process.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250209180616.160253-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The symbolic names for the line-orders are now available in
<dt-bindings/media/video-interfaces.h>. Switch to them instead of using
their numerical values.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250205103311.668768-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Current ulcb/kf of -mix+split.dtsi is using TDM Split Mode, but only for
playback. Use TDM Split Mode on capture too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/875xlrshp5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a node for the System Controller to the RZ/G3E (R9A09G047) SoC DTSI,
as it is also required for SoC identification.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250123170508.13578-9-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the System Controller. It is needed for SoC identification.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250123170508.13578-8-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas Ethernet Switch has three independent ports. Each port can
act as a separate interface, and can be enabled or disabled
independently. Currently all ports are enabled by default, hence board
DTS files that enable the switch must disable all unused ports
explicitly.
Disable all ports by default, and explicitly enable ports that are used,
next to their configuration.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/c4688de8e3289ad82c2cd85f0893eac660ac8890.1737649969.git.geert+renesas@glider.be
Add a DT overlay for SCIF1 (of the Renesas RZ/G3S SoC) routed through
the PMOD1_3A interface available on the Renesas RZ SMARC Carrier II
board.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250120130936.1080069-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable SCIF3. It is routed to the SER1_UART interface on the RZ SMARC
Carrier II board.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250120130936.1080069-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
There are different switches available on both the RZ/G3S SMARC Module and
RZ SMARC Carrier II boards. These switches are used to route different SoC
signals to different parts available on board.
These switches are described in device trees through macros. These macros
are set accordingly such that the resulted compiled dtb to describe the
on-board switches states.
The SCIF1 depends on the state of the SW_CONFIG3 and SW_OPT_MUX4 switches.
SCIF1 can be enabled through a device tree overlay. To manage all switches
in a unified state and allow users to configure the output device tree, add
a file that contains all switch definitions and states.
Commit prepares the code to enable SCIF1 on the RZ/G3S overlay.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250120130936.1080069-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Each rswitch port TSNn has a dedicated MAC address assigned to it, so
does AVB MAC. The MAC addresses for each rswitch port and AVB, four in
total, are stored in the FPGA populated on the board and can be read out
via I2C from bus i2c@e66e0000 address 0x70 offsets 0x58 for AVB and
0x60, 0x68, 0x70 for TSNn.
There is no single MAC address assigned to the rswitch itself, there are
three of them, one for each rswitch port. Instead of ethernet0 alias
for rswitch itself, describe aliases ethernet0, ethernet1 for each
enabled rswitch port. This allows U-Boot to insert MAC addresses from
its environment variables ethaddr/eth1addr/eth2addr into each rswitch
port nodes, so Linux can read and use one unique MAC address for each
rswitch port.
Note that it is unlikely this would break existing rswitch driver
operation in the Linux kernel, because as of right now, the rswitch
driver already calls of_get_ethdev_address() for each port to read
out the MAC address of each rswitch port DT node. If that is missing,
it falls back to MAC address settings read from the hardware itself.
If that also fails, it uses a random MAC address.
Fixes: 412f2224b3 ("arm64: dts: renesas: s4sk: Fix ethernet0 alias")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250118111344.361617-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The rswitch has three independent ports which each can act as a separate
interface with its own MAC address. Describe DT aliases ethernet0,
ethernet1, ethernet2 for each rswitch port in DT. This allows U-Boot to
insert MAC addresses from its environment variables
ethaddr/eth1addr/eth2addr into each rswitch port nodes, so Linux can
read and use one unique MAC address for each rswitch port.
Note that it is unlikely this would break existing rswitch driver
operation in the Linux kernel, because as of right now, the rswitch
driver already calls of_get_ethdev_address() for each port to read
out the MAC address of each rswitch port DT node. If that is missing,
it falls back to MAC address settings read from the hardware itself.
If that also fails, it uses a random MAC address.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250118111344.361617-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The r8a779f0.dtsi now contains labels for each rswitch port in the form
'rswitch_portN'. Use those to access rswitch ports and slightly reduce
the depth of this board DT. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250118111344.361617-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The r8a779f0.dtsi now contains labels for each rswitch port in the form
'rswitch_portN'. Use those to access rswitch ports and slightly reduce
the depth of this board DT. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250118111344.361617-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Introduce labels for each rswitch port in the form 'rswitch_portN'.
Those can be used to access rswitch port nodes directly, which is going
to be useful in reducing DT indentation slightly as well as in the DT
/aliases node to reference the rswitch ports as ethernetN interfaces.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250118111344.361617-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
r8a77970-eagle-function-expansion.dtb: gpio@27: 'vin0_adv7612_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250115211755.194219-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the two Marvell 88Q2110/QFN40 PHYs available on the R-Car V4M
Gray Hawk single-board. The two PHYs are wired up on the board by
default.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250107160127.528933-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When describing the PHYs connected to AVB1 and AVB2, mdio nodes will be
needed to describe the connections, and each mdio node will need to
contain these two properties instead. This will make the #address-cells
and #size-cells described in the base SoC include file redundant and
they will produce warnings, remove them.
In an effort to keep all three AVB nodes style consistent add an mdio
node to AVB0 already described and rename the phy node to better
describe the PHY that is connected to AVB0 before adding more PHYs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250107160127.528933-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>