USB PD controllers which consisting of a microcontroller (acting as the TCPM)
and a port controller (TCPC) - may require that the driver for the PD
controller accesses directly also the on-chip port controller in some cases.
Move tcpci.h to include/linux/usb/ is convenience access TCPC registers.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Link: https://lore.kernel.org/r/20220706083433.2415524-1-xji@analogixsemi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
after usb_ep_queue() if wait_for_completion_interruptible() is
interrupted we need to wait until IRQ gets finished.
Otherwise complete() from epio_complete() can corrupt stack.
Signed-off-by: Jozef Martiniak <jomajm@gmail.com>
Link: https://lore.kernel.org/r/20220708070645.6130-1-jomajm@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver won't probe on a LAN9668 because the pinctrl driver isn't
ready yet. Probe deferral is not supported because the init section
is already discarded. With fw_devlink enabled, the probe won't even
be called. Convert the driver to a proper platform driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220705131951.1388968-2-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The event classes udc_log_ep and udc_log_req both declare:
__dynamic_array(char, name, UDC_TRACE_STR_MAX)
Which will reserve UDC_TRACE_STR_MAX bytes on the ring buffer for the
event to write in name. It then uses snprintf() to write into that space.
Assuming that the string being copied is nul terminated, it is better to
just use the __string() helper. That way only the size of the string is
saved into the ring buffer and not the max size (yes, the entire
UDC_TRACE_STR_MAX is used in the trace event, and anything not used is
just junk in the ring buffer). Worse, there's also meta data saved into
the event that denotes where the string is stored in the event and also
saves its size, which is always going to be UDC_TRACE_STR_MAX.
Convert both to use the __string() and __assign_str() helpers that are for
this kind of use case.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220703091449.317f94b1@rorschach.local.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not set pattrib's src, dst, bssid, ra and ta again in
sta2sta_data_frame.
sta2sta_data_frame is called from validate_recv_data_frame when both to_ds
and from_ds are 0. All pattrib address fields have already been set to the
correct addresses when sta2sta_data_frame is called.
memcpy(pattrib->dst, ieee80211_get_DA(hdr), ETH_ALEN);
ieee80211_get_DA returns addr1 if to_ds and from_ds are 0
memcpy(pattrib->src, ieee80211_get_SA(hdr), ETH_ALEN);
ieee80211_get_SA returns addr2 if to_ds and from_ds are 0
memcpy(pattrib->ra, hdr->addr1, ETH_ALEN);
memcpy(pattrib->ta, hdr->addr2, ETH_ALEN);
For pattrib->dst == addr1, pattrib->src == addr2, these
assignments match those in sta2sta_data_frame that this
patch removes.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220707194914.63794-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the prototype for sta2sta_data_frame. Make the function static, it
is used only inside rtw_recv.c.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220707194914.63794-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netif_napi_add() will soon default to weight of 64 instead of
requiring the user to specify that parameter. Most users already
pass or should pass 64. Move the callers in staging to
netif_napi_add_weight() which will keep the argument.
This way we'll avoid a huge cross-tree conversion when
argument is removed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220705225801.923601-1-kuba@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the ieee80211_is_nullfunc function from ieee80211.h to check for a
nullfunc frame. This is a data frame whose subtype has bit6 set.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704201654.195574-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a misleading comment in ap2sta_data_frame. We are not checking
for QOS frames.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704201654.195574-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The table in ieee80211.h shows that TA is addr2. This value was already
set by validate_recv_data_frame, we don't have to set it again in
ap2sta_data_frame.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704201654.195574-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not set pattrib->ra again in ap2sta_data_frame. This function is
called by validate_recv_data_frame when the packet's ToDS==0 and
FromDS==1.
validate_recv_data_frame has already set pattrib->ra to addr1. This is in
line with the table in ieee80211.h.
ap2sta_data_frame sets pattrib->ra to pattrib->dst. For ToDS==0, FromDS==1,
dst is addr1, i.e. ap2sta_data_frame sets the same value again that was
already set by validate_recv_data_frame.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704201654.195574-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not set pattrib->dst again in ap2sta_data_frame. This function is
called by validate_recv_data_frame when the packet's ToDS==0 and
FromDS==1.
In this case, validate_recv_data_frame has already set pattrib->dst
to addr1.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704201654.195574-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ap2sta_data_frame, for WIFI_MP_STATE && _FW_LINKED, the code
sets pattrib->bssid twice. Remove the first one of these assignments.
Remove an empty comment before the second assignment.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704201654.195574-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch modifies a comment in order for it to comply with Linux
Kernel style guidelines on comments belonging to net/ or drivers/net/ by
fixing the missing * at the beginning of each comment line and removing
the initial almost-blank initial line from the comment block.
checkpatch output:
WARNING: Block comments use * on subsequent lines
Reviewed-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Rommel Rodriguez Perez <alrodperez@gmail.com>
Link: https://lore.kernel.org/r/YsN993FTljv5LYT3@debianmain.debian.pc.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MAC_ADDR_LEN define is not used. Remove it.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704145221.159949-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The r8188eu chipset is connected via usb. We don't need the register
and bit field definitions for the sdio interface.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704145221.159949-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The definitions of the power sequences are in the same file as the function
which processes them. We can simply read the number of entries in a power
sequence. There's no need for a PWR_CMD_END command to indicate the end
of a sequence.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704145221.159949-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PWR_CMD_DELAY has only a single remaining user, who needs a delay in us.
Remove the code and defines for delays in ms.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704145221.159949-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The power sequences are now defined and processed in the same file. We
can move the defines for power sequences and the related struct and
enum from HalPwrSeqCmd.h to HalPwrSeqCmd.c. They don't have to be visible
in other files any more.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220704145221.159949-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change adds a type based test involving the restrict type qualifier
to the BPF selftests. On the btfgen path, this will verify that bpftool
correctly handles the corresponding RESTRICT BTF kind.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220706212855.1700615-3-deso@posteo.net
The function ffaddr2pipehdl() is only used in usb_ops_linux.c.
Make it static.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220702064626.27506-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the case HW_VAR_AMPDU_FACTOR from SetHwReg8188EU() and move
the functionality to a static function in rtw_wlan_util.c. This is
part of the ongoing effort to get rid of SetHwReg8188EU().
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220701210753.8210-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses two issues raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: spaces preferred around that '+' (ctx:VxV)
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Felix Schlepper <f3sch.git@outlook.com>
Link: https://lore.kernel.org/r/87628a2dd08ec0e5b02090485e7a9a1d91b7d2a5.1656667089.git.f3sch.git@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: Blank lines aren't necessary before a close brace '}'
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Felix Schlepper <f3sch.git@outlook.com>
Link: https://lore.kernel.org/r/f3c6bd5c79331e82f006fb2694f791030b07c5ba.1656667089.git.f3sch.git@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses two issues raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: braces {} should be used on all arms of this statement
CHECK: Unbalanced braces around else statement
The coding style rule with not using unnecessary braces around if/else
does not apply if only one branch is a single statement.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Felix Schlepper <f3sch.git@outlook.com>
Link: https://lore.kernel.org/r/651f51d9f92e8a445ceaf9f2073f16dd10458a74.1656667089.git.f3sch.git@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
Unnecessary parentheses around wrqu->encoding
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Felix Schlepper <f3sch.git@outlook.com>
Link: https://lore.kernel.org/r/0e4e340be3f4c7f35a5381b726b1db5fc6842f10.1656667089.git.f3sch.git@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: multiple assignments should be avoided
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Felix Schlepper <f3sch.git@outlook.com>
Link: https://lore.kernel.org/r/899a1010643a05668465069951518e5dcab9c77e.1656667089.git.f3sch.git@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial reason for looking at this code was an
issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: Please use a blank line after function/struct/union/enum
declarations
The additional blank line above the struct/before the headers is
just cleaner.
However, as it turns out since there is no str formatting required
One can replace the error prone str + size struct with a char array.
The rest of this patch fixes the usecases.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Felix Schlepper <f3sch.git@outlook.com>
Link: https://lore.kernel.org/r/4dbc4939e88a2c94f1819b4b0cc2c81dc332710b.1656667089.git.f3sch.git@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit c9cad937c0.
This is part of a revert of the following commits:
commit 708d19d9f3 ("drm/amdgpu: move internal vram_mgr function into the C file")
commit 5e3f1e7729 ("drm/amdgpu: fix start calculation in amdgpu_vram_mgr_new")
commit c9cad937c0 ("drm/amdgpu: add drm buddy support to amdgpu")
[WHY]
Few users reported garbaged graphics as soon as x starts,
reverting until this can be resolved.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708093047.492662-3-Arunpravin.PaneerSelvam@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Add the basic support for Sunplus SP7021-Demo-V3 board.
Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch aims to add an initial support for Sunplus SP7021 SoC.
Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add interrupt controller driver for Sunplus SP7021 SoC.
This is the interrupt controller in P-chip which collects all interrupt
sources in P-chip and routes them to parent interrupt controller in C-chip.
Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces bindings for boards based Sunplus SP7021 SoC.
Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
