Change gpll0 to use parent_hws instead of parent_names for
gcc_disp_gpll0_div_clk_src clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221210190712.451247-2-dmitry.baryshkov@linaro.org
'arm,kryo' is not documented and is not an Arm Ltd thing either as that
is Qualcomm branding. The correct compatible is 'qcom,kryo'.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207211327.2848665-1-robh@kernel.org
SCM has clock inputs and interconnects only on some of the SoCs, so
disallow them inb other cases, which makes the binding stricter.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221122092345.44369-2-krzysztof.kozlowski@linaro.org
Nagara devices use the Dialog SLG51000 PMIC for powering some camera
sensors. Add the required nodes to support it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-7-konrad.dybcio@linaro.org
Set up gpio-controlled fixed regulators for camera on PDX223 and fix
up the existing ones in common and PDX224 trees.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-5-konrad.dybcio@linaro.org
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX223&224 DTSIs to better document the hardware.
Diff between 223 and 224:
pm8350b
< "CAM_PWR_LD_EN",
> "NC",
pm8350c
< "RGBC_IR_PWR_EN",
> "NC",
Which is due to different camera power wiring on 223 and lack of a
ToF sensor on 224.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-3-konrad.dybcio@linaro.org
Now that SPMI is finally in place, include the DTSIs of PMICs present
on Nagara.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-2-konrad.dybcio@linaro.org
Add the spmi bus as found in the SM8450 SoC
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[Konrad: 0x0 -> 0, move #cells down, make reg-names a vertical list]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Adjusted unit address]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-1-konrad.dybcio@linaro.org
Switch to using the devm_pm_runtime_enable() instead of hand-coding
corresponding action to call pm_runtime_disable().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-22-dmitry.baryshkov@linaro.org
Switch to using the devm_pm_runtime_enable() instead of hand-coding
corresponding action to call pm_runtime_disable().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-21-dmitry.baryshkov@linaro.org
Switch to using the devm_pm_runtime_enable() instead of hand-coding
corresponding action to call pm_runtime_disable().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-20-dmitry.baryshkov@linaro.org
Switch to using the devm_pm_runtime_enable() instead of hand-coding
corresponding action to call pm_runtime_disable().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-19-dmitry.baryshkov@linaro.org
The five msm8976_cfg_* objects ought to be static, as reported by LKP
and sparse, fix this.
drivers/soc/qcom/ramp_controller.c:235:27: sparse: sparse: symbol 'msm8976_cfg_dfs_sid' was not declared. Should it be static?
drivers/soc/qcom/ramp_controller.c:246:27: sparse: sparse: symbol 'msm8976_cfg_link_sid' was not declared. Should it be static?
drivers/soc/qcom/ramp_controller.c:250:27: sparse: sparse: symbol 'msm8976_cfg_lmh_sid' was not declared. Should it be static?
drivers/soc/qcom/ramp_controller.c:256:27: sparse: sparse: symbol 'msm8976_cfg_ramp_en' was not declared. Should it be static?
drivers/soc/qcom/ramp_controller.c:262:27: sparse: sparse: symbol 'msm8976_cfg_ramp_dis' was not declared. Should it be static?
Fixes: a723c95fa1 ("soc: qcom: Add Qualcomm Ramp Controller driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230110042004.2378444-1-quic_bjorande@quicinc.com
The Clevo PCX0DX/TUXEDO XP1511, need quirks for the keyboard to not be
occasionally unresponsive after resume.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20230110134524.553620-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Clang static analysis reports this problem
drivers/platform/chrome/cros_ec_lpc.c:379:13: warning: The left operand
of '!=' is a garbage value [core.UndefinedBinaryOperatorResult]
if (buf[0] != 'E' || buf[1] != 'C') {
~~~~~~ ^
The check depends on the side effect of the read. When the read fails
or is short, a buf containing garbage could be mistaken as correct.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20230110193611.3573777-1-trix@redhat.com
Initialize panic notifier to avoid the following lockdep warning:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
[...]
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound async_run_entry_fn
unwind_backtrace from show_stack
[...]
blocking_notifier_chain_register from cros_ec_debugfs_probe
cros_ec_debugfs_probe from platform_probe
Fixes: d90fa2c64d ("platform/chrome: cros_ec: Poll EC log on EC panic")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[tzungbi: trimmed the stack trace in commit message.]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20230110221033.7441-1-m.szyprowski@samsung.com
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-09 (ice)
This series contains updates to ice driver only.
Jiasheng Jiang frees allocated cmd_buf if write_buf allocation failed to
prevent memory leak.
Yuan Can adds check, and proper cleanup, of gnss_tty_port allocation call
to avoid memory leaks.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Add check for kzalloc
ice: Fix potential memory leak in ice_gnss_tty_write()
====================
Link: https://lore.kernel.org/r/20230109225358.3478060-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The use of kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Since its use in fs/cramfs is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in fs/cramfs. Instead
of open-coding kmap_local_page() + memcpy(), use memcpy_from_page().
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
While experimenting with applying noqueue to a classful queue discipline,
we discovered a NULL pointer dereference in the __dev_queue_xmit()
path that generates a kernel OOPS:
# dev=enp0s5
# tc qdisc replace dev $dev root handle 1: htb default 1
# tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit
# tc qdisc add dev $dev parent 1:1 handle 10: noqueue
# ping -I $dev -w 1 -c 1 1.1.1.1
[ 2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2.173217] #PF: supervisor instruction fetch in kernel mode
...
[ 2.178451] Call Trace:
[ 2.178577] <TASK>
[ 2.178686] htb_enqueue+0x1c8/0x370
[ 2.178880] dev_qdisc_enqueue+0x15/0x90
[ 2.179093] __dev_queue_xmit+0x798/0xd00
[ 2.179305] ? _raw_write_lock_bh+0xe/0x30
[ 2.179522] ? __local_bh_enable_ip+0x32/0x70
[ 2.179759] ? ___neigh_create+0x610/0x840
[ 2.179968] ? eth_header+0x21/0xc0
[ 2.180144] ip_finish_output2+0x15e/0x4f0
[ 2.180348] ? dst_output+0x30/0x30
[ 2.180525] ip_push_pending_frames+0x9d/0xb0
[ 2.180739] raw_sendmsg+0x601/0xcb0
[ 2.180916] ? _raw_spin_trylock+0xe/0x50
[ 2.181112] ? _raw_spin_unlock_irqrestore+0x16/0x30
[ 2.181354] ? get_page_from_freelist+0xcd6/0xdf0
[ 2.181594] ? sock_sendmsg+0x56/0x60
[ 2.181781] sock_sendmsg+0x56/0x60
[ 2.181958] __sys_sendto+0xf7/0x160
[ 2.182139] ? handle_mm_fault+0x6e/0x1d0
[ 2.182366] ? do_user_addr_fault+0x1e1/0x660
[ 2.182627] __x64_sys_sendto+0x1b/0x30
[ 2.182881] do_syscall_64+0x38/0x90
[ 2.183085] entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
[ 2.187402] </TASK>
Previously in commit d66d6c3152 ("net: sched: register noqueue
qdisc"), NULL was set for the noqueue discipline on noqueue init
so that __dev_queue_xmit() falls through for the noqueue case. This
also sets a bypass of the enqueue NULL check in the
register_qdisc() function for the struct noqueue_disc_ops.
Classful queue disciplines make it past the NULL check in
__dev_queue_xmit() because the discipline is set to htb (in this case),
and then in the call to __dev_xmit_skb(), it calls into htb_enqueue()
which grabs a leaf node for a class and then calls qdisc_enqueue() by
passing in a queue discipline which assumes ->enqueue() is not set to NULL.
Fix this by not allowing classes to be assigned to the noqueue
discipline. Linux TC Notes states that classes cannot be set to
the noqueue discipline. [1] Let's enforce that here.
Links:
1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt
Fixes: d66d6c3152 ("net: sched: register noqueue qdisc")
Cc: stable@vger.kernel.org
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20230109163906.706000-1-fred@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a typo of "permision" which should be "permission".
Signed-off-by: Dai Shixin <dai.shixin@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Link: https://lore.kernel.org/r/202301091935262709751@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If CONFIG_ELF_CORE is not set:
fs/coredump.c:835:12: error: ‘dump_emit_page’ defined but not used [-Werror=unused-function]
835 | static int dump_emit_page(struct coredump_params *cprm, struct page *page)
| ^~~~~~~~~~~~~~
Fix this by moving dump_emit_page() inside the existing section
protected by #ifdef CONFIG_ELF_CORE.
Fixes: 06bbaa6dc5 ("[coredump] don't use __kernel_write() on kmap_local_page()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As BPF_F_MMAPABLE flag is now conditionnaly set (by map_is_mmapable),
it should not be toggled but disabled if not supported by kernel.
Fixes: 4fcac46c7e ("libbpf: only add BPF_F_MMAPABLE flag for data maps with global vars")
Signed-off-by: Ludovic L'Hours <ludovic.lhours@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230108182018.24433-1-ludovic.lhours@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When bpftool feature does not find kernel config
files under default path or wrong format,
do not output CONFIG_XYZ is not set.
Skip kernel config check and continue.
Signed-off-by: Chethan Suresh <chethan.suresh@sony.com>
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230109023742.29657-1-chethan.suresh@sony.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
After initial start-up, the driver triggers ATI (calibration) with
the newly loaded register configuration in place. Next, the driver
polls a register field to ensure ATI completed in a timely fashion
and that the device is ready to sense.
However, communicating with the device over I2C while ATI is under-
way may induce noise in the device and cause ATI to fail. As such,
the vendor recommends not to poll the device during ATI.
To solve this problem, let the device naturally signal to the host
that ATI is complete by way of an interrupt. A completion prevents
the device from successfully probing until this happens.
As an added benefit, initial switch states are now reported in the
interrupt handler at the same time ATI status is checked. As such,
duplicate code that reports initial switch states has been removed
from iqs269_input_init().
The former logic that scaled ATI timeout and filter settling delay
is not carried forward with the new implementation, as it produces
overly conservative delays at the lower clock rate.
Rather, a single timeout that covers both clock rates is used. The
filter settling delay does not happen to be necessary and has been
removed as well.
Fixes: 04e49867fa ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y7RtB2T7AF9rYMjK@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Polling the device while it transitions from automatic to manual
power mode switching may keep the device from actually finishing
the transition. The process appears to time out depending on the
polling rate and the device's core clock frequency.
This is ultimately unnecessary in the first place; instead it is
sufficient to write the desired mode during initialization, then
disable automatic switching at suspend. This eliminates the need
to ensure the device is prepared for a manual change and removes
the 'suspend_mode' variable.
Similarly, polling the device while it transitions from one mode
to another under manual control may time out as well. This added
step does not appear to be necessary either, so drop it.
Fixes: 04e49867fa ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y7Rs+eEXlRw4Vq57@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Unless it is being done as part of servicing a soft reset interrupt,
configuring channels on-the-fly (as is the case when writing to the
ati_trigger attribute) may cause GPIO3 (which reflects the state of
touch for a selected channel) to be inadvertently asserted.
To solve this problem, follow the vendor's recommendation and write
all channel configuration as well as the REDO_ATI register field as
part of a single block write. This ensures the device has been told
to re-calibrate itself following an I2C stop condition, after which
sensing resumes and GPIO3 may be asserted.
Fixes: 04e49867fa ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y7Rs8GyV7g0nF5Yy@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The time the device takes to deassert its RDY output following an
I2C stop condition scales with the core clock frequency.
To prevent level-triggered interrupts from being reasserted after
the interrupt handler returns, increase the time before returning
to account for the worst-case delay (~140 us) plus margin.
Fixes: 04e49867fa ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y7Rs484ypy4dab5G@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.
Currently, the driver does not call fwnode_handle_put() on nested
event nodes. This patch solves this problem by adding the missing
instances of fwnode_handle_put().
As part of this change, the logic which parses each channel's key
code is gently refactored in order to reduce the number of places
from which fwnode_handle_put() is called.
Fixes: 04e49867fa ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Y7Rsx68k/gvDVXAt@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add an eDP panel entry for IVO M133NW4J.
Due to lack of documentation, use the delay_200_500_p2e100 timings like
some other IVO entries for now.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221231142721.338643-2-abel.vesa@linaro.org
The actual name is R133NW4K-R0.
Fixes: 0f9fa5f58c ("drm/panel-edp: add IVO M133NW4J-R3 panel entry")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221231142721.338643-1-abel.vesa@linaro.org
Enabling CONFIG_MODULE_ALLOW_BTF_MISMATCH is an indication that BTF
mismatches are expected and module loading should proceed
anyway. Logging with pr_warn() on every one of these "benign"
mismatches creates unnecessary noise when many such modules are
loaded. Instead, handle this case with a single log warning that BTF
info may be unavailable.
Mismatches also result in calls to __btf_verifier_log() via
__btf_verifier_log_type() or btf_verifier_log_member(), adding several
additional lines of logging per mismatched module. Add checks to these
paths to skip logging for module BTF mismatches in the "allow
mismatch" case.
All existing logging behavior is preserved in the default
CONFIG_MODULE_ALLOW_BTF_MISMATCH=n case.
Signed-off-by: Connor O'Brien <connoro@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230107025331.3240536-1-connoro@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Michael Walle says:
====================
net: mdio: Start separating C22 and C45
This patch set starts the separation of C22 and C45 MDIO bus
transactions at the API level to the MDIO Bus drivers. C45 read and
write ops are added to the MDIO bus driver structure, and the MDIO
core will try to use these ops if requested to perform a C45
transfer. If not available a fallback to the older API is made, to
allow backwards compatibility until all drivers are converted.
A few drivers are then converted to this new API.
The core DSA patch was dropped for now as there is still an ongoing
discussion. It will be picked up in a later series again.
v2: https://lore.kernel.org/r/20221227-v6-2-rc1-c45-seperation-v2-0-ddb37710e5a7@walle.cc
v1: https://lore.kernel.org/r/20220508153049.427227-1-andrew@lunn.ch
====================
Link: https://lore.kernel.org/r/20221227-v6-2-rc1-c45-seperation-v3-0-ade1deb438da@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The global2 SMI MDIO bus driver can perform both C22 and C45
transfers. Create separate functions for each and register the C45
versions using the new API calls where appropriate. Update the SERDES
code to make use of these new accessors.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some DSA devices pass through PHY access to the MDIO bus the switch is
on. Add C45 versions of the current C22 helpers for nested accesses to
MDIO busses, so that C22 and C45 can be separated in these DSA
drivers.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fec MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The xgmac MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.
While at it, remove the misleading comment. According to Vladimir
Oltean:
- miimcom is a register accessed by fsl_pq_mdio.c, not by xgmac_mdio.c
- "device dev" doesn't really refer to anything (maybe "dev_addr").
- I don't understand what is meant by the comment "All PHY
configuration has to be done through the TSEC1 MIIM regs". Or rather
said, I think I understand, but it is irrelevant to the driver for 2
reasons:
* TSEC devices use the fsl_pq_mdio.c driver, not this one
* It doesn't matter to this driver whose TSEC registers are used for
MDIO access. The driver just works with the registers it's given,
which is a concern for the device tree.
- barring the above, the rest just describes the MDIO bus API, which is
superfluous
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The marvell MDIO driver supports two different hardware blocks. The
XSMI block is C45 only. Convert this block to the new API, and only
populate the c45 calls in the bus structure.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bitbbanging bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new driver API calls.
The SH Ethernet driver places wrappers around these functions. In
order to not break boards which might be using C45, add similar
wrappers for C45 operations.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that mdiobus_c45_addr() is only used within the MDIO code during
fallback, move the function next to its only users. This function
should not be used any more in drivers, the c45 helpers should be used
in its place, so hiding it away will prevent any new users from being
added.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing a C22 operation, check that the bus driver actually
provides the methods, and return -EOPNOTSUPP if not. C45 only busses
do exist, and in future their C22 methods will be NULL.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that C45 uses its own read/write methods, the validation performed
when a bus is registers needs updating. All combinations of C22 and
C45 are supported, but both read and write methods must be provided,
read only busses are not supported etc.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the PCS-XPCS driver to make use of the C45 MDIO bus API for
modify_change().
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
