While compile-testing randconfig builds for the upcoming boardfile
removal, I noticed that an earlier patch of mine was completely
broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced
one set of build failures with another one, now resulting in
link failures like
ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe':
drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority'
ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources':
drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma'
drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info'
ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma':
drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status'
I tried reworking it, but the resulting patch ended up much bigger than
simply avoiding the original problem of unused-function warnings like
arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable]
As a result, revert the previous fix, and rearrange the code that
produces warnings to hide them. For mcbsp, the #ifdef check can
simply be removed as the cpu_is_omapxxx() checks already achieve
the same result, while in the io.c the easiest solution appears to
be to merge the common map bits into each soc specific portion.
This gets cleaned in a nicer way after omap7xx support gets dropped,
as the remaining SoCs all have the exact same I/O map.
Fixes: 615dce5bf7 ("ARM: omap1: fix build with no SoC selected")
Cc: stable@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Switch gfx3d_clk_src parents to use parent_hws instead of parent_data,
to clarify that these clocks are internal.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Updated commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-16-dmitry.baryshkov@linaro.org
The max source and destination limits for scalers in MTL have changed.
Use the new values accordingly.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221223130509.43245-3-luciano.coelho@intel.com
In newer hardware versions (i.e. display version >= 14), the second
scaler doesn't support vertical scaling.
The current implementation of the scaling limits is simplified and
only occurs when the planes are created, so we don't know which scaler
is being used.
In order to handle separate scaling limits for horizontal and vertical
scaling, and different limits per scaler, split the checks in two
phases. We first do a simple check during plane creation and use the
best-case scenario (because we don't know the scaler that may be used
at a later point) and then do a more specific check when the scalers
are actually being set up.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221223130509.43245-2-luciano.coelho@intel.com
Between the 'goto out' statement and the 'out' label there are no other
statements, so it is useless to check the return value of the
bcm63xx_pmb_power_on_cpu() function. Then, let's remove the statements
that are unnecessarily executed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20221206170913.3316205-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We silently cast an unsigned int into a __le32 which makes sparse
complain. Moreover, we never actually convert endianness between the
CPU's and the expected little-endian value. Fix both at once by calling
cpu_to_le32().
Fixes: 40c31955e4 ("firmware: raspberrypi: Provide a helper to query a clock max rate")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221116091712.1309651-3-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20230102115255.17802-1-maxime@cerno.tech
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
DT schema expects certain pattern for IOMMU/SMMU nodes:
northstar2/ns2-svk.dtb: mmu@64000000: $nodename:0: 'mmu@64000000' does not match '^iommu@[0-9a-f]*'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Link: https://lore.kernel.org/r/20221222092456.79203-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Test the getpagesize() function. Make sure it returns the correct
value.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This function returns the page size used by the running kernel. The
page size value is taken from the auxiliary vector at 'AT_PAGESZ' key.
'getpagesize(2)' is assumed as a syscall becuase the manpage placement
of this function is in entry 2 ('man 2 getpagesize') despite there is
no real 'getpagesize(2)' syscall in the Linux syscall table. Define
this function in 'sys.h'.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Previous commits save the address of the auxiliary vector into a global
variable @_auxv. This commit creates a new function 'getauxval()' as a
helper function to get the auxv value based on the given key.
The behavior of this function is identic with the function documented
in 'man 3 getauxval'. This function is also needed to implement
'getpagesize()' function that we will wire up in the next patches.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
It was tested on riscv64 only.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
It was tested in arm, thumb1 and thumb2 modes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested on s390 both with environ inherited from
_start and extracted from envp.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested on riscv64 both with environ inherited from
_start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested with mips24kc (BE) both with environ inherited
from _start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested in arm and thumb1 and thumb2 modes, and for each
mode, both with environ inherited from _start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Till now errno was declared static so that it could be eliminated if
unused. While the goal is commendable for tiny executables as it allows
to eliminate any data and bss segments when not used, this comes with
some limitations, one of which being that the errno symbol seen in
different units are not the same. Even though this has never been a
real issue given the nature of the programs involved till now, it
happens that referencing the same symbol from multiple units can also
be achieved using weak symbols, with a difference being that only one
of them will be used for all of them. Compared to weak symbols, static
basically have no benefit for regular programs since there are always
at least a few variables in most of these, so the bss segment cannot
be eliminated. E.g:
$ size nolibc-test-static-errno
text data bss dec hex filename
11531 0 48 11579 2d3b nolibc-test-static-errno
Furthermore, the weak symbol doesn't use bss storage at all, resulting
in a slightly section:
$ size nolibc-test-weak-errno
text data bss dec hex filename
11531 0 40 11571 2d33 nolibc-test-weak-errno
This patch thus converts errno from static to weak.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The historic nolibc code did not include asm/fcntl.h and had to define
the various O_RDWR etc macros in each arch-specific file (since such
values differ between certain archs). This was found at least once to
induce bugs due to wrong definitions. Let's get rid of all of them and
include asm/nolibc.h from sys.h instead. This was verified to work
properly on all supported architectures.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In Thumb mode, register r7 is normally used to store the frame pointer.
By default when optimizing at -Os there's no frame pointer so this works
fine. But if no optimization is set, then build errors occur, indicating
that r7 cannot not be used. It's difficult to cheat because it's the
compiler that is complaining, not the assembler, so it's not even possible
to report that the register was clobbered. The solution consists in saving
and restoring r7 around the syscall, but this slightly inflates the code.
The syscall number is passed via r6 which is never used by syscalls.
The current patch adds a few macroes which do that only in Thumb mode,
and which continue to directly assign the syscall number to register r7
in ARM mode. Now this always builds and works for all modes (tested on
Arm, Thumbv1, Thumbv2 modes, at -Os, -O0, -O0 -fomit-frame-pointer).
The code is very slightly inflated in thumb-mode without frame-pointers
compared to previously (e.g. 7928 vs 7864 bytes for nolibc-test) but at
least it's always operational. And it's possible to disable this mechanism
by setting NOLIBC_OMIT_FRAME_POINTER.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Passing -mthumb to the kernel.org arm toolchain failed to build because it
defaults to armv5 hence thumb1, which has a fairly limited instruction set
compared to thumb2 enabled with armv7 that is much more complete. It's not
very difficult to adjust the instructions to also build on thumb1, it only
adds a total of 3 instructions, so it's worth doing it at least to ease use
by casual testers. It was verified that the adjusted code now builds and
works fine for armv5, thumb1, armv7 and thumb2, as long as frame pointers
are not used.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The out-of-block asm() statement carrying _start does not allow the
compiler to know what section the assembly code is being emitted to,
and there's no easy way to push/pop the current section and restore
it. It sometimes causes issues depending on the include files ordering
and compiler optimizations. For example if a variable is declared
immediately before the asm() block and another one after, the compiler
assumes that the current section is still .bss and doesn't re-emit it,
making the second variable appear inside the .text section instead.
Forcing .bss at the end of the _start block doesn't work either because
at certain optimizations the compiler may reorder blocks and will make
some real code appear just after this block.
A significant number of solutions were attempted, but many of them were
still sensitive to section reordering. In the end, the best way to make
sure the compiler and assembler agree on the current section is to place
this code inside a function. Here the function is directly called _start
and configured not to emit a frame-pointer, hence to have no prologue.
If some future architectures would still emit some prologue, another
working approach consists in naming the function differently and placing
the _start label inside the asm statement. But the current solution is
simpler.
It was tested with nolibc-test at -O,-O0,-O2,-O3,-Os for arm,arm64,i386,
mips,riscv,s390 and x86_64.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If session setup failed with kerberos auth, we ended up freeing
cifs_ses::auth_key.response twice in SMB2_auth_kerberos() and
sesInfoFree().
Fix this by zeroing out cifs_ses::auth_key.response after freeing it
in SMB2_auth_kerberos().
Fixes: a4e430c8c8 ("cifs: replace kfree() with kfree_sensitive() for sensitive data")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The variable match is being assigned a value that is never read, it
is being re-assigned a new value later on. The assignment is redundant
and can be removed.
Cleans up clang scan-build warning:
fs/cifs/dfs_cache.c:1302:2: warning: Value stored to 'match' is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Fix a race when creating NFSv4 files
- Revert the use of relaxed bitops
-----BEGIN PGP SIGNATURE-----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=/7AX
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a race when creating NFSv4 files
- Revert the use of relaxed bitops
* tag 'nfsd-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Use set_bit(RQ_DROPME)
Revert "SUNRPC: Use RMW bitops in single-threaded hot paths"
nfsd: fix handling of cached open files in nfsd4_open codepath
- fix xtensa allmodconfig build broken by the kcsan test
- drop unused members of struct thread_struct
-----BEGIN PGP SIGNATURE-----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=3G83
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20230110' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix xtensa allmodconfig build broken by the kcsan test
- drop unused members of struct thread_struct
* tag 'xtensa-20230110' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: drop unused members of struct thread_struct
kcsan: test: don't put the expect array on the stack
Not all ports have retimers. Only register a retimer switch if the
"retimer-switch" property is present for that port's mux
device.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20230104060846.112216-2-pmalani@chromium.org
Using device_property_present() multiple times on an ACPI device
leads to kernel panics on Chromebook systems. This happens when there
is > 1 boolean property in an ACPI device which is created dynamically
by the BIOS as part of SSDT[1] on Chromebook systems
Since fwnode_* can handle simple device tree properties equally
well, switch to using the fwnode_property_present() function
version. This will avoid panics and make the usage consistent
when we introduce a check for the 2nd property in a subsequent patch.
[1] https://wiki.osdev.org/SSDT
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20230104060846.112216-1-pmalani@chromium.org
