Commit graph

1,169,205 commits

Author SHA1 Message Date
Mans Rullgard
c8ed7211bf ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2
Add pinmux setting for USB1 overcurrent on pwm2 pad.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:27:10 +08:00
Stefan Riedmueller
fbaff050bb ARM: mach-imx: imx6ul: Print SOC revision on boot
Add the print of the CPU type and SOC revision during boot.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Robert Karszniewicz <r.karszniewicz@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:25:18 +08:00
Oleksij Rempel
c7e73b5051 ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
Remove board specific PHY fixup introduced by commit:

| 709bc0657f ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init")

This fixup addresses boards with a specific configuration: a KSZ8081RNA
PHY with attached clock source to XI (Pin 8) of the PHY equal to 50MHz.

For the KSZ8081RND PHY, the meaning of the reg 0x1F bit 7 is different
(compared to the KSZ8081RNA). A set bit means:

- KSZ8081RNA: clock input to XI (Pin 8) is 50MHz for RMII
- KSZ8081RND: clock input to XI (Pin 8) is 25MHz for RMII

In other configurations, for example a KSZ8081RND PHY or a KSZ8081RNA
with 25Mhz clock source, the PHY will glitch and stay in not recoverable
state.

It is not possible to detect the clock source frequency of the PHY. And
it is not possible to automatically detect KSZ8081 PHY variant - both
have same PHY ID. It is not possible to overwrite the fixup
configuration by providing proper device tree description. The only way
is to remove this fixup.

If this patch breaks network functionality on your board, fix it by
adding PHY node with following properties:

	ethernet-phy@x {
		...
		micrel,led-mode = <1>;
		clocks = <&clks IMX6UL_CLK_ENET_REF>;
		clock-names = "rmii-ref";
		...
	};

The board which was referred in the initial patch is already fixed.
See: arch/arm/boot/dts/imx6ul-14x14-evk.dtsi

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:18:41 +08:00
Oleksij Rempel
2c62f908c0 ARM: dts: add Plymovent BAS board
Plymovent BAS is a base system controller produced for the Plymovent filter
systems.

Co-Developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:10:00 +08:00
Oleksij Rempel
8c906de4b7 ARM: dts: add Plymovent M2M board
Plymovent M2M is a control interface produced for the Plymovent filter
systems.

Co-Developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:09:50 +08:00
Oleksij Rempel
f1b8d58d31 dt-bindings: arm: fsl: add Plymovent BAS board
Add Plymovent Group BV BAS iMX6dl based board

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:09:24 +08:00
Oleksij Rempel
94e17a0339 dt-bindings: arm: fsl: add Plymovent M2M board
Add Plymovent Group BV M2M iMX6dl based board

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:09:22 +08:00
Oleksij Rempel
7ae786b05f dt-bindings: vendor-prefixes: Add an entry for Plymovent
Add "ply" entry for Plymovent Group BV: https://www.plymovent.com/

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:09:04 +08:00
Oleksij Rempel
922fb2db02 dt-bindings: display: simple: Add Kyocera tcg070wvlq panel
So far, this panel seems to be compatible with "lg,lb070wv8", on other
hand it is better to set this compatible in the devicetree. So, let's
add it for now only to the dt-binding documentation to fix the
checkpatch warnings.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:09:01 +08:00
Oleksij Rempel
279ebba7fb dt-bindings: display: simple: add EDT compatibles already supported by the driver
Some EDT compatibles are already supported by the driver but will fail
on checkpatch script. Fix it by syncing dt-bindings documentation with the
driver.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:08:58 +08:00
Oleksij Rempel
d3c83bcab3 dt-bindings: display: simple: fix alphabetical order for EDT compatibles
Reorder it alphabetically and remove one double entry.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:08:36 +08:00
Shengjiu Wang
4c36eb1019 arm64: dts: imx8mn-evk: Add sound-spdif card nodes
Add sound-spdif card nodes which are supported on imx8mn-evk board.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:02:14 +08:00
Shengjiu Wang
b5f2ace228 arm64: dts: imx8mn-evk: Add sound-wm8524 card nodes
Add sound-wm8524 card nodes which are supported on imx8mn-evk board.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:02:12 +08:00
Shengjiu Wang
26442c7998 arm64: dts: imx8mn: Configure clock rate for audio plls
Configure clock rate for audio plls. audio pll1 is used
as parent clock for clocks that is multiple of 8kHz.
audio pll2 is used as parent clock for clocks that is
multiple of 11kHz.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 11:02:00 +08:00
Al Viro
d67568410a orangefs_file_mmap(): use %pD
... and no, file can't be NULL there - it's not called that way *and*
it would've oopsed a few lines prior on such call anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-06 21:59:52 -05:00
Shengjiu Wang
b33cf814b1 arm64: dts: imx8mn: Fix duplicate node name
Error log:
sysfs: cannot create duplicate filename '/bus/platform/devices/30000000.bus'

The spba bus name is duplicate with aips bus name.
Refine spba bus name to fix this issue.

Fixes: 970406eaef ("arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07 10:59:16 +08:00
Al Viro
b9e4666fc1 cifs_debug: use %pd instead of messing with ->d_name
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-06 21:53:52 -05:00
Paul E. McKenney
1afb95fee0 torture: Maintain torture-specific set of CPUs-online books
The TREE01 rcutorture scenario intentionally creates confusion as to the
number of available CPUs by specifying the "maxcpus=8 nr_cpus=43" kernel
boot parameters.  This can disable rcutorture's load shedding, which
currently uses num_online_cpus(), which would count the extra 35 CPUs.
However, the rcutorture guest OS will be provisioned with only 8 CPUs,
which means that rcutorture will present full load even when all but one
of the original 8 CPUs are offline.  This can result in spurious errors
due to extreme overloading of that single remaining CPU.

This commit therefore keeps a separate set of books on the number of
usable online CPUs, so that torture_num_online_cpus() is used for load
shedding instead of num_online_cpus().  Note that initial sizing must
use num_online_cpus() because torture_num_online_cpus() will return
NR_CPUS until shortly after torture_onoff_init() is invoked.

Reported-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:22 -08:00
Paul E. McKenney
0b962c8fe0 torture: Clean up after torture-test CPU hotplugging
This commit puts all CPUs back online at the end of a torture test,
and also unconditionally puts them online at the beginning of the test,
rather than just in the case of built-in tests.  This allows torture tests
to behave in a predictable manner, whether built-in or based on modules.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:22 -08:00
Paul E. McKenney
edf7b84178 rcutorture: Make object_debug also double call_rcu() heap object
This commit provides a test for call_rcu() printing the allocation address
of a double-freed callback by double-freeing a callback allocated via
kmalloc().  However, this commit does not depend on any other commit.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:21 -08:00
Paul E. McKenney
8a67a20bf2 torture: Throttle VERBOSE_TOROUT_*() output
This commit adds kernel boot parameters torture.verbose_sleep_frequency
and torture.verbose_sleep_duration, which allow VERBOSE_TOROUT_*() output
to be throttled with periodic sleeps on large systems.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:21 -08:00
Paul E. McKenney
414c116e01 torture: Make refscale throttle high-rate printk()s
This commit adds a short delay for verbose_batched-throttled printk()s
to further decrease console flooding.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:20 -08:00
Paul E. McKenney
1eba0ef981 rcutorture: Use hrtimers for reader and writer delays
This commit replaces schedule_timeout_uninterruptible() and
schedule_timeout_interruptible() with torture_hrtimeout_us() and
torture_hrtimeout_jiffies() to avoid timer-wheel synchronization.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:20 -08:00
Paul E. McKenney
ed24affa71 torture: Make stutter use torture_hrtimeout_*() functions
This commit saves a few lines of code by making the stutter_wait()
and torture_stutter() functions use torture_hrtimeout_jiffies() and
torture_hrtimeout_us().

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:20 -08:00
Paul E. McKenney
ea31fd9ca8 rcutorture: Use torture_hrtimeout_jiffies() to avoid busy-waits
Because rcu_torture_writer() and rcu_torture_fakewriter() predate
hrtimers, they do timer-wheel-decoupled timed waits by using the
timer-wheel-based schedule_timeout_interruptible() functions in
conjunction with a random udelay()-based wait.  This latter unnecessarily
burns CPU time, so this commit instead uses torture_hrtimeout_jiffies()
to decouple from the timer wheels without busy-waiting.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:19 -08:00
Paul E. McKenney
ae19aaafae torture: Add fuzzed hrtimer-based sleep functions
This commit adds torture_hrtimeout_ns(), torture_hrtimeout_us(),
torture_hrtimeout_ms(), torture_hrtimeout_jiffies(), and
torture_hrtimeout_s(), each of which uses hrtimers to block for a fuzzed
time interval.  These functions are intended to be used by the various
torture tests to decouple wakeups from the timer wheel, thus providing
more opportunity for Murphy to insert destructive race conditions.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:19 -08:00
Paul E. McKenney
682189a3f8 rcutorture: Make rcu_torture_fakewriter() use blocking wait primitives
Full testing of the new SRCU polling API requires that the fake
writers also use it in order to test concurrent calls to all of the API
members, especially start_poll_synchronize_srcu().  This commit makes
rcu_torture_fakewriter() use all available blocking grace-period-wait
primitives available from the RCU flavor under test.

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:18 -08:00
Paul E. McKenney
18fbf307b7 rcutorture: Make synctype[] and nsynctype be static global
Full testing of the new SRCU polling API requires that the fake writers
also use it in order to test concurrent calls to all of the API members,
especially start_poll_synchronize_srcu().  This commit prepares the ground
for this by making the synctype[] and nsynctype variables be static
globals so that the rcu_torture_fakewriter() function can access them.
Initialization of these variables is moved from rcu_torture_writer()
to a new rcu_torture_write_types() function that is invoked from
rcu_torture_init() just before the first writer kthread is spawned.

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:10 -08:00
Paul E. McKenney
12a910e3cd rcutorture: Require entire stutter period be post-boot
Currently, the rcu_torture_writer() function checks that all required
grace periods elapse during a stutter interval, which is a multi-second
time period during which the test load is removed.  However, this check
is suppressed during early boot (that is, before init is spawned) in
order to avoid false positives that otherwise occur due to heavy load
on the single boot CPU.

Unfortunately, this approach is insufficient.  It is possible that the
stutter interval might end just as init is spawned, so that early boot
conditions prevailed during almost the entire stutter interval.

This commit therefore takes a snapshot of boot-complete state just
before the stutter interval, thus suppressing the check for failure to
complete grace periods unless the entire stutter interval took place
after early boot.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:08:12 -08:00
Paul E. McKenney
e76506f0e8 refscale: Allow summarization of verbose output
The refscale test prints enough per-kthread console output to provoke RCU
CPU stall warnings on large systems.  This commit therefore allows this
output to be summarized.  For example, the refscale.verbose_batched=32
boot parameter would causes only every 32nd line of output to be logged.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:08:09 -08:00
Paul E. McKenney
e3e1a99787 torture: Compress KASAN vmlinux files
The sizes of vmlinux files built with KASAN enabled can approach a full
gigabyte, which can result in disk overflow sooner rather than later.
Fortunately, the xz command compresses them by almost an order of
magnitude.  This commit therefore uses xz to compress vmlinux file built
by torture.sh with KASAN enabled.

However, xz is not the fastest thing in the world.  In fact, it is way
slower than rotating-rust mass storage.  This commit therefore also adds a
--compress-kasan-vmlinux argument to specify the degree of xz concurrency,
which defaults to using all available CPUs if there are that many files in
need of compression.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:46 -08:00
Paul E. McKenney
c54e413822 torture: Add --kcsan-kmake-arg to torture.sh for KCSAN
In 2020, running KCSAN often requires careful choice of compiler.
This commit therefore adds a --kcsan-kmake-arg parameter to torture.sh
to allow specifying (for example) "CC=clang" to the kernel build process
to correctly build a KCSAN-enabled kernel.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:46 -08:00
Paul E. McKenney
c66c0f94b3 torture: Add command and results directory to torture.sh log
This commit adds the command and arguments to the torture.sh log file, and
also outputs the results directory.  This latter allows impatient users
to quickly find the results that are being generated by the current run.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:45 -08:00
Paul E. McKenney
8847bd4988 torture: Allow scenarios to be specified to torture.sh
This commit adds --configs-rcutorture, --configs-locktorture, and
--configs-scftorture arguments to torture.sh, allowing the desired
set of scenarios to be passed to each.  The default for each has been
changed from a large-system-appropriate set to just CFLIST for each.
Users are encouraged to create scripts that provide appropriate settings
for their specific systems.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:45 -08:00
Paul E. McKenney
5ae5f7453f torture: Drop log.long generation from torture.sh
Now that kvm.sh puts all the relevant details in the "log" file,
there is no need for torture.sh to generate a separate "log.long"
file.  This commit therefore drops this from torture.sh.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:45 -08:00
Paul E. McKenney
c679d90b21 torture: Make torture.sh refuse to do zero-length runs
This commit causes torture.sh to check for zero-length runs and to take
the cowardly option of refusing to run them, logging its cowardice for
later inspection.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:44 -08:00
Paul E. McKenney
d97addc419 torture: Make torture.sh throttle VERBOSE_TOROUT_*() for refscale
This commit causes torture.sh to use the torture.verbose_sleep_frequency
kernel boot parameter to throttle verbose refscale output on large systems.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:44 -08:00
Paul E. McKenney
1fe9cef42b torture: Make torture.sh allmodconfig retain and label output
This commit places "---" markers in the torture.sh script's allmodconfig
output, and uses "<<" to avoid overwriting earlier output from this
build test.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:43 -08:00
Paul E. McKenney
c9a9d8e8f2 torture: Create doyesno helper function for torture.sh
This commit saves a few lines of code by creating a doyesno helper bash
function for argument parsing.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:43 -08:00
Paul E. McKenney
264da4832b torture: Make torture.sh refscale runs use verbose_batched module parameter
On large systems, the refscale printk() rate can overrun the file system's
ability to accept console log messages.  This commit therefore uses the
new verbose_batched module parameter to rate-limit some of the higher-rate
printk() calls.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:42 -08:00
Paul E. McKenney
7a99487c76 torture: Make torture.sh rcuscale and refscale deal with allmodconfig
The .mod.c files created by allmodconfig builds interfers with the approach
torture.sh uses to enumerate types of rcuscale and refscale runs.  This
commit therefore tightens the pattern matching to avoid this interference.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:42 -08:00
Paul E. McKenney
532017b119 torture: Enable torture.sh argument checking
This commit uncomments the argument checking for the --duration argument
to torture.sh.  While in the area, it also corrects the duration units
from seconds to minutes.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:41 -08:00
Paul E. McKenney
69d2b33e3f torture: Auto-size SCF and scaling runs based on number of CPUs
This commit improves torture.sh flexibility by autoscaling the number
of CPUs to be used in variable-CPUs torture tests, including scftorture,
refscale, rcuscale, and kvfree.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:41 -08:00
Paul E. McKenney
a115a775a8 torture: Add "make allmodconfig" to torture.sh
This commit adds the ability to do "make allmodconfig" to torture.sh,
given that normal rcutorture runs do not normally catch missing exports.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:41 -08:00
Paul E. McKenney
197220d4a3 torture: Remove use of "eval" in torture.sh
The bash "eval" command enables Bobby Tables attacks, which might not
be a concern in torture testing by themselves, but one could imagine
these combined with a cut-and-paste attack.  This commit therefore gets
rid of them.  This comes at a price in terms of bash quoting not working
nicely, so the "--bootargs" argument lists are now passed to torture_one
via a bash-variable side channel.  This might be a bit ugly, but it will
also allow torture.sh to grow its own --bootargs parameter.

While in the area, add proper header comments for the bash functions.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:40 -08:00
Paul E. McKenney
1adb5d6b52 torture: Make torture.sh use common time-duration bash functions
This commit makes torture.sh use the new bash functions get_starttime()
and get_starttime_duration() created for kvm.sh.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:03:37 -08:00
Paul E. McKenney
bfc19c13d2 torture: Add torture.sh torture-everything script
Although tailoring a specific set of kvm.sh runs has served rcutorture
testing well over many years, it requires a relatively distraction-free
environment, which is not always available.  This commit therefore
adds a prototype torture.sh script that by default tortures pretty much
everything the rcutorture scripting is designed to torture, and which
can be given command-line arguments to take a more focused approach.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:59:47 -08:00
Geert Uytterhoeven
b89bc060b5 sh/intc: Restore devm_ioremap() alignment
Restore alignment of the continuation of the devm_ioremap() call in
register_intc_controller().

Fixes: 4bdc0d676a ("remove ioremap_nocache and devm_ioremap_nocache")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06 19:55:29 -05:00
Wang Qing
a118584e7e sh: mach-sh03: remove duplicate include
Remove duplicate header which is included twice.

Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06 19:55:28 -05:00
Wang Qing
7a202ec74c arch: sh: remove duplicate include
Remove duplicate header which is included twice.

Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06 19:55:27 -05:00