Commit graph

1,169,205 commits

Author SHA1 Message Date
Xu Yilun
477dfdccfc memory: dfl-emif: add the DFL EMIF private feature driver
This driver is for the EMIF private feature implemented under FPGA
Device Feature List (DFL) framework. It is used to expose memory
interface status information as well as memory clearing control.

The purpose of memory clearing block is to zero out all private memory
when FPGA is to be reprogrammed. This gives users a reliable method to
prevent potential data leakage.

[mdf@kernel.org: Fixed up ABI doc]

Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20210107043714.991646-9-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Xu Yilun
56172ab353 fpga: dfl: add support for N3000 Nios private feature
This patch adds support for the Nios handshake private feature on Intel
PAC (Programmable Acceleration Card) N3000.

The Nios is the embedded processor on the FPGA card. This private feature
provides a handshake interface to FPGA Nios firmware, which receives
retimer configuration command from host and executes via an internal SPI
master (spi-altera). When Nios finishes the configuration, host takes over
the ownership of the SPI master to control an Intel MAX10 BMC (Board
Management Controller) Chip on the SPI bus.

For Nios firmware handshake part, this driver requests the retimer
configuration for Nios firmware on probe, and adds some sysfs nodes for
user to query the onboard retimer's working mode and Nios firmware
version.

For SPI part, this driver adds a spi-altera platform device as well as
the MAX10 BMC spi slave info. A spi-altera driver will be matched to
handle the following SPI work.

[mdf@kernel.org: Fixed up ABI doc kernel release]

Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210107043714.991646-8-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Xu Yilun
ecc1641aca fpga: dfl: move dfl bus related APIs to include/linux/dfl.h
Now the dfl drivers could be made as independent modules and put in
different folders according to their functionalities. In order for
scattered dfl device drivers to include dfl bus APIs, move the
dfl bus APIs to a new header file in the public folder.

[mdf@kernel.org: Fixed up header guards to match filename]

Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-7-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Xu Yilun
4a224acec5 fpga: dfl: add dfl bus support to MODULE_DEVICE_TABLE()
Device Feature List (DFL) is a linked list of feature headers within the
device MMIO space. It is used by FPGA to enumerate multiple sub features
within it. Each feature can be uniquely identified by DFL type and
feature id, which can be read out from feature headers.

A dfl bus helps DFL framework modularize DFL device drivers for
different sub features. The dfl bus matches its devices and drivers by
DFL type and feature id.

This patch adds dfl bus support to MODULE_DEVICE_TABLE() by adding info
about struct dfl_device_id in devicetable-offsets.c and add a dfl entry
point in file2alias.c.

Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-6-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Xu Yilun
9326eecd93 fpga: dfl: move dfl_device_id to mod_devicetable.h
In order to support MODULE_DEVICE_TABLE() for dfl device driver, this
patch moves struct dfl_device_id to mod_devicetable.h

Some brief description for DFL (Device Feature List) is added to make
the DFL known to the whole kernel.

Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-5-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Xu Yilun
e08b9e6d87 fpga: dfl: fix the definitions of type & feature_id for dfl devices
The value of the field dfl_device.type comes from the 12 bits register
field DFH_ID according to DFL spec. So this patch changes the definition
of the type field to u16.

Also it is not necessary to illustrate the valid bits of the type field
in comments. Instead we should explicitly define the possible values in
the enumeration type for it, because they are shared by hardware spec.
We should not let the compiler decide these values.

Similar changes are also applied to dfl_device.feature_id.

This patch also fixed the MODALIAS format according to the changes
above.

Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-4-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Matthew Gerlach
fa41d10589 fpga: dfl-pci: locate DFLs by PCIe vendor specific capability
A PCIe vendor specific extended capability is introduced by Intel to
specify the start of a number of DFLs.

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-3-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Matthew Gerlach
3e265f836e fpga: dfl: refactor cci_enumerate_feature_devs()
In preparation of looking for dfls based on a vendor specific pci
capability, move the code for the default method of finding the first
dfl at offset 0 of Bar 0 to its own function.

Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-2-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Bjorn Andersson
aded8c7c2b iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context
On SM8150 it's occasionally observed that the boot hangs in between the
writing of SMEs and context banks in arm_smmu_device_reset().

The problem seems to coincide with a display refresh happening after
updating the stream mapping, but before clearing - and there by
disabling translation - the context bank picked to emulate translation
bypass.

Resolve this by explicitly disabling the bypass context already in
cfg_probe.

Fixes: f9081b8ff5 ("iommu/arm-smmu-qcom: Implement S2CR quirk")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210106005038.4152731-1-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 14:10:46 +00:00
Zheng Yongjun
841081d89d usb: usbip: Use DEFINE_SPINLOCK() for spinlock
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201223141431.835-1-zhengyongjun3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 14:34:24 +01:00
Wesley Cheng
4d7aae9f7a usb: gadget: configfs: Add a specific configFS reset callback
In order for configFS based USB gadgets to set the proper charge current
for bus reset scenarios, expose a separate reset callback to set the
current to 100mA based on the USB battery charging specification.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1609283011-21997-4-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 14:34:22 +01:00
Lu Baolu
420d42f6f9 iommu/vt-d: Fix lockdep splat in sva bind()/unbind()
Lock(&iommu->lock) without disabling irq causes lockdep warnings.

========================================================
WARNING: possible irq lock inversion dependency detected
5.11.0-rc1+ #828 Not tainted
--------------------------------------------------------
kworker/0:1H/120 just changed the state of lock:
ffffffffad9ea1b8 (device_domain_lock){..-.}-{2:2}, at:
iommu_flush_dev_iotlb.part.0+0x32/0x120
but this lock took another, SOFTIRQ-unsafe lock in the past:
 (&iommu->lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&iommu->lock);
                               local_irq_disable();
                               lock(device_domain_lock);
                               lock(&iommu->lock);
  <Interrupt>
    lock(device_domain_lock);

 *** DEADLOCK ***

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201231005323.2178523-5-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 13:27:14 +00:00
Lu Baolu
4df7b2268a Revert "iommu: Add quirk for Intel graphic devices in map_sg"
This reverts commit 65f746e828.

As commit 8a473dbadc ("drm/i915: Fix DMA mapped scatterlist walks") and
commit 934941ed5a ("drm/i915: Fix DMA mapped scatterlist lookup") fixed
the DMA scatterlist limitations in the i915 driver, remove this temporary
workaround.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Cc: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201231005323.2178523-4-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 13:27:14 +00:00
Lu Baolu
1efd17e7ac iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb()
Use IS_ALIGNED() instead. Otherwise, an unaligned address will be ignored.

Fixes: 33cd6e642d ("iommu/vt-d: Flush PASID-based iotlb for iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201231005323.2178523-1-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 13:27:14 +00:00
Christian König
a73858ef4d drm/ttm: unexport ttm_pool_init/fini
Drivers are not supposed to use this directly any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/412156/
2021-01-07 14:25:43 +01:00
Christian König
e0658f970a drm/radeon: stop re-init the TTM page pool
Drivers are not supposed to init the page pool directly any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/412153/
2021-01-07 14:24:54 +01:00
Thinh Nguyen
a5c7682aaa usb: dwc3: gadget: Clear wait flag on dequeue
If an active transfer is dequeued, then the endpoint is freed to start a
new transfer. Make sure to clear the endpoint's transfer wait flag for
this case.

Fixes: e0d19563eb ("usb: dwc3: gadget: Wait for transfer completion")
Cc: stable@vger.kernel.org
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/b81cd5b5281cfbfdadb002c4bcf5c9be7c017cfd.1609828485.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 14:24:35 +01:00
Prashant Malani
6c75c2bad3 usb: typec: Send uevent for num_altmodes update
Generate a change uevent when the "number_of_alternate_modes" sysfs file
for partners and plugs is updated by a port driver.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210107034904.4112029-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 14:22:22 +01:00
Peter Robinson
41952a6601 usb: typec: Fix copy paste error for NVIDIA alt-mode description
The name of the module for the NVIDIA alt-mode is incorrect as it
looks to be a copy-paste error from the entry above, update it to
the correct typec_nvidia module name.

Cc: Ajay Gupta <ajayg@nvidia.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210106001605.167917-1-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 14:19:12 +01:00
taehyun.cho
e2459108b5 usb: gadget: enable super speed plus
Enable Super speed plus in configfs to support USB3.1 Gen2.
This ensures that when a USB gadget is plugged in, it is
enumerated as Gen 2 and connected at 10 Gbps if the host and
cable are capable of it.

Many in-tree gadget functions (fs, midi, acm, ncm, mass_storage,
etc.) already have SuperSpeed Plus support.

Tested: plugged gadget into Linux host and saw:
[284907.385986] usb 8-2: new SuperSpeedPlus Gen 2 USB device number 3 using xhci_hcd

Tested-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: taehyun.cho <taehyun.cho@samsung.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Link: https://lore.kernel.org/r/20210106154625.2801030-1-lorenzo@google.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 14:18:31 +01:00
Andrey Konovalov
e89eed02a5 kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
Done opencode in_serving_softirq() checks in in_serving_softirq() to avoid
cluttering the code, hide them in kcov helpers instead.

Fixes: aee9ddb1d3 ("kcov, usb: only collect coverage from __usb_hcd_giveback_urb in softirq")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/aeb430c5bb90b0ccdf1ec302c70831c1a47b9c45.1609876340.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 14:17:29 +01:00
Maarten Lankhorst
2313f47003 Merge drm/drm-next into drm-misc-next
Staying in sync to drm-next, and to be able to pull ttm fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-01-07 14:11:28 +01:00
Charan Teja Reddy
05cd84691e dmabuf: fix use-after-free of dmabuf's file->f_inode
It is observed 'use-after-free' on the dmabuf's file->f_inode with the
race between closing the dmabuf file and reading the dmabuf's debug
info.

Consider the below scenario where P1 is closing the dma_buf file
and P2 is reading the dma_buf's debug info in the system:

P1						P2
					dma_buf_debug_show()
dma_buf_put()
  __fput()
    file->f_op->release()
    dput()
    ....
      dentry_unlink_inode()
        iput(dentry->d_inode)
        (where the inode is freed)
					mutex_lock(&db_list.lock)
					read 'dma_buf->file->f_inode'
					(the same inode is freed by P1)
					mutex_unlock(&db_list.lock)
      dentry->d_op->d_release()-->
        dma_buf_release()
          .....
          mutex_lock(&db_list.lock)
          removes the dmabuf from the list
          mutex_unlock(&db_list.lock)

In the above scenario, when dma_buf_put() is called on a dma_buf, it
first frees the dma_buf's file->f_inode(=dentry->d_inode) and then
removes this dma_buf from the system db_list. In between P2 traversing
the db_list tries to access this dma_buf's file->f_inode that was freed
by P1 which is a use-after-free case.

Since, __fput() calls f_op->release first and then later calls the
d_op->d_release, move the dma_buf's db_list removal from d_release() to
f_op->release(). This ensures that dma_buf's file->f_inode is not
accessed after it is released.

Cc: <stable@vger.kernel.org> # 5.4.x-
Fixes: 4ab59c3c63 ("dma-buf: Move dma_buf_release() from fops to dentry_ops")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1609857399-31549-1-git-send-email-charante@codeaurora.org
2021-01-07 13:40:30 +01:00
Daniel Vetter
cb3cfbf79a drm-misc-next for v5.12:
Core Changes:
 - Lots of drm documentation updates by Simor Ser.
 - Require that each crtc has a unique primary plane.
 - Add fixme that fbdev_generic_setup is confusing.
 
 Driver Changes:
 - Update addresses for TI display drivers maintainers.
 - Make DRM_VIRTIO_GPU select VIRTIO.
 - Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl/1mzYACgkQ/lWMcqZw
 E8MdUA/6AkcEoz3PQfEASx3jtcbriMEJBedEczDcJize8qHdRtxvnh0hGnD7uavC
 YrasrhVqB6MgFGdQYaTmjrxVJ+0kgio5E6V9GENgaSQQ8DBwmVFdGW6DWroq0+Ia
 LXZIlpc4p1ujglB38O8izXRmAE0BX9EvtO7nhWyNs8mTMpj/jpvnWbLnHOlxGGGo
 3megOsDXywZ+33bHYIUipl0/rRauu2W13elmj+SBJmKa99qqAosoPLaxXMKCuyhf
 4meNwtSXcLgDqsuoXFi6n+0hNqf1QaKX2gU8E8itHTybkeooKAG1bSM/PQs/YdE0
 rlZm2S2JCL3ht4FeGpITrkDOjvqZaL7UKqjLSYpV+gOcDMLM8uj+aHdVwpsFtWuk
 aQbYt9VQDjiaO7gzDAmjbt8pr9mGhuRsfYDn5FjzVZxk8uaF3JU/vHxkd8vLGdQK
 AseG+qmu/cEzyeHYnClrC1tGQYsO5YFxU0iC6ieqlUZfMzB+kKH0LJfjgu3RcT59
 WIyeJlQqncKu66UAkD+za0cNhHXxRwW12LjVHpY09ravFeROUfp7w9SoHwMhF9Um
 xpvDtU1RF+X7YaCFxHVZ9CEx3+upQXByiOPP9LXln/H0zxBTKL6mJXjUDQici5ys
 WeQoUTpeC/UbFcmMph5CPLOBliwigxDOgkOZmihPaslw8MH4nTs=
 =hp3d
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2021-01-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.12:

Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.

Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdfbfd7a-b91d-3f59-11c8-984704ce0ee1@linux.intel.com
2021-01-07 13:40:20 +01:00
Mika Westerberg
c14556fc0c thunderbolt: Drop duplicated 0x prefix from format string
The tb_dbg() call is using %#x that already adds the 0x prefix so don't
duplicate it.

Fixes: 9039387e16 ("thunderbolt: Add USB4 router operation proxy for firmware connection manager")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
2021-01-07 15:14:44 +03:00
Daniel Vetter
73dc923eeb - Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
 - R-Car DU miscellaneous fixes
 - Miscellaneous bridge and bridge bindings fixes
 - Assorted misc driver cleanups
 - Constify drm_driver for PCI devices
 -----BEGIN PGP SIGNATURE-----
 
 iQJWBAABCgBAFiEEy51od1KYIM1TCZsbZficN7xUIQ0FAl/z+e0iHGxhdXJlbnQu
 cGluY2hhcnRAaWRlYXNvbmJvYXJkLmNvbQAKCRBl+Jw3vFQhDc4jEAC0jEoDN8IK
 dEF/3DrG7P6v5FDk/+XqEkXYXLq/lJAVVKialQOn0mWYpdHOZn3POww7RM2qmvkp
 M3pJHx915Gq+McrAIehVuA8DFTIblUvX8iJYFhfXnIDJPccd2nCl34P914B8y4X+
 jEJxDu5eHaiEavUrWttGOJQfP80V0b2pGFD1m85WA3DOtpgKFK12l3UqVrOIIYp3
 kwaDYCN29hImmSOM1+PJjna2ZTaY1sJ4SWJzl5yHHLzWw6kf2RuA6hkMvhDuCZWW
 C/NlN4vYYDQKteMzG5jI1eijjkR0nl0S8MmS+ZMh2vPfDkDDnweZwKHbPZ90BLJi
 5yd6OeVkhFIn75JQk8XDEwYnsAAdK6CWsfKscCsemda7TPL9J7xniSuWUKTuG9TM
 axJl2/VLxpO/99vGA1yBByg4Ypuq3tY2iPFWVKgSPZ5F4di28Q5ZJzkv1Ul9CJoK
 7gHLk2ZM4bnsaNxhGjQB1IMZwnfBpmrddXQYDBPGvUpGDX3K4dJItA+vGR5FnKAH
 pJSC+C1JPI6OzDH6MLg4uolMFR3iMpnqffHtpLl/ElwbNk9VP6qArfihNmdYicgT
 UNbsQnOLCA9NBmGTaEy78DOzgrgvtxvc8KvUyXlgiXy8DWLwkShVgWoI4FJw7cTQ
 xxd6CER00mi43i6NfxNBnlO0vMLY4bPeeA==
 =eQ9W
 -----END PGP SIGNATURE-----

Merge tag 'du-next-20210105' of git://linuxtv.org/pinchartl/media into drm-next

- Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
- R-Car DU miscellaneous fixes
- Miscellaneous bridge and bridge bindings fixes
- Assorted misc driver cleanups
- Constify drm_driver for PCI devices

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X/P8IOrVXkTpLeCm@pendragon.ideasonboard.com
2021-01-07 13:02:57 +01:00
Catalin Marinas
83b5bd628f arm64: Move PSTATE.TCO setting to separate functions
For consistency with __uaccess_{disable,enable}_hw_pan(), move the
PSTATE.TCO setting into dedicated __uaccess_{disable,enable}_tco()
functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
2021-01-07 11:39:01 +00:00
Daniel Vetter
ca765c731e - Display hotplug fix for gen2/gen3 (Chris)
- Remove trailing semicolon (Tom)
 - Suppress display warnings for old ifwi presend on our CI (Chris)
 - OA/Perf related workaround (Lionel)
 - Replace I915_READ/WRITE per new uncore and display read/write functions (Jani)\
 .
 - PSR improvements (Jose)
 - HDR and other color changes on LSPCON (Uma, Ville)
 - FBC fixes for TGL (Uma)
 - Record plane update times for debugging (Chris)
 - Refactor panel backlight control functions (Dave)
 - Display power improvements (Imre)
 - Add VRR register definition (Manasi)
 - Atomic modeset improvements for bigjoiner pipes (Ville)
 - Switch off the scanout during driver unregister (Chris)
 - Clean-up DP's FEW enable (Manasi)
 - Fix VDSCP slice count (Manasi)
 - Fix and clean up around rc_model_size for DSC (Jani)
 - Remove Type-C noisy debug warn message (Sean)
 - Display HPD code clean-up (Ville)
 - Refactor Intel Display (Dave)
 - Start adding support for Intel's eDP backlight controls (Lyude)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl/zg+sACgkQ+mJfZA7r
 E8rQxQf+I1sRI+7hyUxJ3V2bYayY1MIlw5W4wMqe2WX+NXd3/1RIQlXKZke9SFz5
 E2Q3XMFa9Q3XWSIW4W4+ro0uoj4uXTpCfwsHY2W7CkkroILlYbLT+pL7TjJ2fkBg
 ZbEScaXnQfwiicVKXmz4zbYud9isQCyQpBHUPteBxhhD01eE6yqABv/mg6+hSujE
 9q4Dhp2ozSL+4YiRO6gQ6rOcqx7fIBKXwNyd9wTNnv7UFw8iRmjkr8eLVwUC7MlM
 h+2uTaFY+hxxnGHPWpwxek6jhrmMk2o9ItxzaBpSVXbvVWRbHoUUSeqeAvGBBvZS
 O5QoufH98Sg07lc5664Dk4nMgeTHYg==
 =zIiA
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-next-2021-01-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Display hotplug fix for gen2/gen3 (Chris)
- Remove trailing semicolon (Tom)
- Suppress display warnings for old ifwi presend on our CI (Chris)
- OA/Perf related workaround (Lionel)
- Replace I915_READ/WRITE per new uncore and display read/write functions (Jani)
- PSR improvements (Jose)
- HDR and other color changes on LSPCON (Uma, Ville)
- FBC fixes for TGL (Uma)
- Record plane update times for debugging (Chris)
- Refactor panel backlight control functions (Dave)
- Display power improvements (Imre)
- Add VRR register definition (Manasi)
- Atomic modeset improvements for bigjoiner pipes (Ville)
- Switch off the scanout during driver unregister (Chris)
- Clean-up DP's FEW enable (Manasi)
- Fix VDSCP slice count (Manasi)
- Fix and clean up around rc_model_size for DSC (Jani)
- Remove Type-C noisy debug warn message (Sean)
- Display HPD code clean-up (Ville)
- Refactor Intel Display (Dave)
- Start adding support for Intel's eDP backlight controls (Lyude)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104211018.GA1094707@intel.com
2021-01-07 12:20:29 +01:00
Philipp Zabel
5d91295257 drm/imx: dw_hdmi-imx: depend on OF to fix randconfig compile tests on x86_64
The i.MX6 HDMI driver uses of_drm_find_bridge() and thus cannot be built
with CONFIG_OF disabled:

    ld: drivers/gpu/drm/imx/dw_hdmi-imx.o: in function `dw_hdmi_imx_probe':
    dw_hdmi-imx.c:(.text+0x29f): undefined reference to `of_drm_find_bridge'

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Fixes: c805ec7eb2 ("drm/imx: dw_hdmi-imx: move initialization into probe")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-01-07 11:54:21 +01:00
Hans de Goede
6fdb335f1c drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence
Commit 25b4620ee8 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode")
added an intel_dsi_msleep() helper which skips sleeping if the
MIPI-sequences have a version of 3 or newer and the panel is in vid-mode;
and it moved a bunch of msleep-s over to this new helper.

This was based on my reading of the big comment around line 730 which
starts with "Panel enable/disable sequences from the VBT spec.",
where the "v3 video mode seq" column does not have any wait t# entries.

Given that this code has been used on a lot of different devices without
issues until now, it seems that my interpretation of the spec here is
mostly correct.

But now I have encountered one device, an Acer Aspire Switch 10 E
SW3-016, where the panel will not light up unless we do actually honor the
panel_on_delay after exexuting the MIPI_SEQ_PANEL_ON sequence.

What seems to set this model apart is that it is lacking a
MIPI_SEQ_DEASSERT_RESET sequence, which is where the power-on
delay usually happens.

Fix the panel not lighting up on this model by using an unconditional
msleep(panel_on_delay) instead of intel_dsi_msleep() when there is
no MIPI_SEQ_DEASSERT_RESET sequence.

Fixes: 25b4620ee8 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118124058.26021-1-hdegoede@redhat.com
2021-01-07 11:54:09 +01:00
Jeremy Szu
91bc156817 ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines
* The HP ZBook Fury 15/17 G7 Mobile Workstation are using ALC285 codec
   which is using 0x04 to control mute LED and 0x01 to control micmute LED.

 * The right channel speaker is no sound and it needs to expose GPIO1 for
   initialing AMP.

Add quirks to support them.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210106130549.100532-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-07 11:40:39 +01:00
Daniel Vetter
e240cc7665 drm/imx: fixes and drm managed resources
- Reduce stack usage in ipu-di.
 - Fix imx-ldb for compile tests.
 - Make drm encoder control functions optional.
 - Add drm managed variants drmm_encoder_alloc(),
   drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
   drmm_crtc_alloc_with_planes() for drm_encoder_init(),
   drm_simple_encoder_init(), drm_universal_plane_init(), and
   drm_crtc_init_with_planes(), respectively.
 - Update imx-drm to use the new functions for drm managed resource
   allocation, moving initialization from bind to probe where possible.
 - Fix imx-tve clock provider leak.
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCX/M62RcccC56YWJlbEBw
 ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwPdlAP4/zZ401iFrj+ZiRTYFNGHaRrBI
 ldQ97lk2Ndzgp5tHzQD/dsAMFymw5+fYlp2xa25kB4LQJLzOC+KzlZwFKF5W4QM=
 =I3bV
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-next-2021-01-04' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: fixes and drm managed resources

- Reduce stack usage in ipu-di.
- Fix imx-ldb for compile tests.
- Make drm encoder control functions optional.
- Add drm managed variants drmm_encoder_alloc(),
  drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
  drmm_crtc_alloc_with_planes() for drm_encoder_init(),
  drm_simple_encoder_init(), drm_universal_plane_init(), and
  drm_crtc_init_with_planes(), respectively.
- Update imx-drm to use the new functions for drm managed resource
  allocation, moving initialization from bind to probe where possible.
- Fix imx-tve clock provider leak.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[danvet: Fix conflict between doc changes by both Philipp and Simon
Ser, see 9999587b68 ("drm: rework description of primary and cursor
planes")]
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c745fc1596898932c9454fd2979297b4242566a2.camel@pengutronix.de
2021-01-07 11:24:50 +01:00
Yongqiang Niu
87f2eb1b21 dt-bindings: mediatek: add description for mt8183 display
add description for mt8183 display

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-01-07 18:13:06 +08:00
Daniel Vetter
5beed15e4b Merge tag 'topic/dp-hdmi-2.1-pcon-2020-12-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Add support for DP-HDMI2.1 PCON

From the series cover letter:

This patch series attempts to add support for a DP-HDMI2.1 Protocol
Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata
E5 to DisplayPort_v2.0:
https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299
The details are mentioned in:
VESA DP-to-HDMI PCON Specification Standalone Document
https://groups.vesa.org/wg/DP/document/15651

This series starts with adding support for FRL (Fixed Rate Link)
Training between the PCON and HDMI2.1 sink.
As per HDMI2.1 specification, a new data-channel or lane is added in
FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher
bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4
lanes).

With these patches, the HDMI2.1 PCON can be configured to achieve FRL
training based on the maximum FRL rate supported by the panel, source
and the PCON.
The approach is to add the support for FRL training between PCON and
HDMI2.1 sink and gradually add other blocks for supporting higher
resolutions and other HDMI2.1 features, that can be supported by pcon
for the sources that do not natively support HDMI2.1.

This is done before the DP Link training between the source and PCON
is started. In case of FRL training is not achieved, the PCON will
work in the regular TMDS mode, without HDMI2.1 feature support.
Any interruption in FRL training between the PCON and HDMI2.1 sink is
notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD
registers are read and FRL training is re-attempted.

Currently, we have tested the FRL training and are able to enable 4K
display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting
panel.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfdpndkt.fsf@intel.com
2021-01-07 11:02:25 +01:00
Sriram Dash
6ee49118f8 MAINTAINERS: Update MCAN MMIO device driver maintainer
Update Pankaj Sharma as maintainer for mcan mmio device driver as I
will be moving to a different role.

Signed-off-by: Sriram Dash <sriram.dash@samsung.com>
Acked-by: Pankaj Sharma <pankj.sharma@samsung.com>
Link: https://lore.kernel.org/r/20210104123134.16930-1-sriram.dash@samsung.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07 11:02:10 +01:00
Lad Prabhakar
1169ec8f5d can: rcar: Kconfig: update help description for CAN_RCAR config
The rcar_can driver also supports RZ/G SoC's, update the description to reflect
this.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210104090327.6547-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07 11:02:10 +01:00
Marc Kleine-Budde
2fbb397f58 can: mcp251xfd: mcp251xfd_handle_rxif_ring(): first increment RX tail pointer in HW, then in driver
The previous patch fixes a TEF vs. TX race condition, by first updating the TEF
tail pointer in hardware, and then updating the driver internal pointer.

The same pattern exists in the RX-path, too. This should be no problem, as the
driver accesses the RX-FIFO from the interrupt handler only, thus the access is
properly serialized. Fix the order here, too, so that the TEF- and RX-path look
similar.

Fixes: 1f652bb6ba ("can: mcp25xxfd: rx-path: reduce number of SPI core requests to set UINC bit")
Link: https://lore.kernel.org/r/20210105214138.3150886-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07 11:02:09 +01:00
Marc Kleine-Budde
6086f02a18 can: mcp251xfd: mcp251xfd_handle_tefif(): fix TEF vs. TX race condition
The mcp251xfd driver uses a TX FIFO for sending CAN frames and a TX Event FIFO
(TEF) for completed TX-requests.

The TEF event handling in the mcp251xfd_handle_tefif() function has a race
condition. It first increments the tx-ring's tail counter to signal that
there's room in the TX and TEF FIFO, then it increments the TEF FIFO in
hardware.

A running mcp251xfd_start_xmit() on a different CPU might not stop the txqueue
(as the tx-ring still shows free space). The next mcp251xfd_start_xmit() will
push a message into the chip and the TX complete event might overflow the TEF
FIFO.

This patch changes the order to fix the problem.

Fixes: 68c0c1c7f9 ("can: mcp251xfd: tef-path: reduce number of SPI core requests to set UINC bit")
Link: https://lore.kernel.org/r/20210105214138.3150886-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07 11:02:09 +01:00
Daniel Vetter
18589d74f4 drm-misc-next for v5.12:
UAPI Changes:
 - Not necessarily one, but we document that userspace needs to force probe connectors.
 
 Cross-subsystem Changes:
 - Require FB_ATY_CT for aty on sparc64.
 - video: Fix documentation, and a few compiler warnings.
 - Add devicetree bindings for DP connectors.
 - dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.
 
 Core Changes:
 - ttm: Warn when releasing a pinned bo.
 - ttm: Cleanup bo size handling.
 - cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
 - Split drm_prime_sg_to_page_addr_arrays into 2 functions.
 - Add a new api to install irq using devm.
 - Update panel kerneldoc to inline style.
 - Add DP support to drm/bridge.
 - Assorted small fixes to ttm, fb-helper, scheduler.
 - Add atomic_commit_setup function callback.
 - Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
 - Allow using degamma for legacy gamma if gamma is not available.
 - Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
 - ttm: Cleanup the lru handler.
 
 Driver Changes:
 - Add pm support to ingenic.
 - Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
 - Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
 - Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
 - Cleanup compiler and docbook warnings in a lot of fbdev devices.
 - Use the drmm_vram_helper in hisilicon.
 - Add support for BCM2711 DSI1 in vc4.
 - Add support for 8-bit delta RGB panels to ingenic.
 - Add documentation on how to test vkms.
 - Convert vc4 to atomic helpers.
 - Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
 - Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
 - More refactoring of omap dsi code.
 - Enable 10/12 bpc outputs in vc4.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl/bLtAACgkQ/lWMcqZw
 E8M5mBAAs6iA3giF+LrzQzszZqOFmtExwjHsvJXDtiINrVubdRov2XbbaOZ+8Eax
 Cnnc5QzokJV8v1IReImz+cP7i4uXyWmwQsthY2WvHYLXZmZfZUV+rK4cCtJIKXlR
 9EvkEFtdPZ6OpyJ8p1G0r/UNqXxqOl4pEhp6NZdSj1mscz2yux/BuqX+1tX1j5+G
 SIfwcKIY+nIwnVpKwhJplJNfFwthRzENxq2KMt+PGLcpOWLHEgwqzKoR+ddTcKf2
 Nk1w2OERbnBVRt8NzCIeyczlSp4QuB+NpE5mFEBedmLatGYqwAIwPMt22AVRP9rc
 SdXqjVxg3UJ5UNMYXQwjrnJq1nIm1ViYt7za/e2aMC8g9oI7tNQ5uI7XViO6+tk5
 3vQV40pHVfMLGzkzqGhv9qHYAkkc+gPMAXwObuzmYppVVZn8dnrkAco7Ib8WPrRc
 g8JD0bpIsOrgqCTj2W54fC/ZP7hQZpffOrxWY7alhlriEl4E7To6OvTwEavIzxCm
 ajkO129oItOcATDTGiUV3JRWCTdCj4cNz7cQi4pC2QgaUIy8twjm57V8nnFDUCNg
 ifi1dIY24DOrHxdmZ8sAWZRoPzcl5a84c8EqEkGZieEsdr3Za4XMZD8tqI2uSJrU
 x+OfqgfvqNZenkuc+SUDZJQ855iqdkzJcqZnkAn61VpPh7XCtxk=
 =orEC
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2020-12-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.12:

UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.

Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.

Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.

Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/78381a4f-45fd-aed4-174a-94ba051edd37@linux.intel.com
2021-01-07 10:46:32 +01:00
Quanyang Wang
75e9e9764c arm64: defconfig: enable clock driver for ZynqMP platforms
The Zynqmp Ultrascale clock controller generates clocks for peripherals
by default. So enable this clock driver for ZynqMP platforms.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20201209021416.1017790-1-quanyang.wang@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-07 10:44:57 +01:00
Jernej Skrabec
086b4f7afd
arm64: dts: allwinner: h5: Add deinterlace node
Deinterlace core is completely compatible to H3.

Add a node for it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210106182523.1325796-1-jernej.skrabec@siol.net
2021-01-07 10:39:45 +01:00
Jernej Skrabec
62de535663
ARM: dts: sun8i: r40: Add deinterlace node
R40 contains deinterlace core compatible to that in H3. One peculiarity
is that RAM gate is shared with CSI1. User manual states it's separate
but that's not true. Shared gate was verified with BSP Linux code check
and with runtime tests (CPU crashed if CSI1 gate was not ungated).

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210106181901.1324075-3-jernej.skrabec@siol.net
2021-01-07 10:39:37 +01:00
Jernej Skrabec
3069a84fd6
dt-bindings: media: Add Allwinner R40 deinterlace compatible
Allwinner R40 SoC also contains deinterlace core, compatible to H3.

Add compatible string for it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210106181901.1324075-2-jernej.skrabec@siol.net
2021-01-07 10:39:34 +01:00
Daniel Vetter
4e181dede9 Merge tag 'drm-intel-fixes-2021-01-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.11-rc3:
- Use per-connector PM QoS tracking for DP aux communication
- GuC firmware fix for older Cometlakes
- Clear the gpu reloc and shadow batches

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877dop18zf.fsf@intel.com
2021-01-07 10:26:06 +01:00
Tom Rix
4d2b71634b HID: wiimote: remove h from printk format specifier
See Documentation/core-api/printk-formats.rst.
h should no longer be used in the format specifier for printk.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-07 10:14:58 +01:00
Tom Rix
a876e7e2a8 HID: uclogic: remove h from printk format specifier
See Documentation/core-api/printk-formats.rst.
h should no longer be used in the format specifier for printk.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-07 10:14:57 +01:00
Daniel Vetter
57cda5e986 Merge tag 'amd-drm-fixes-5.11-2021-01-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.11-2021-01-06:

amdgpu:
- Telemetry fix for VGH
- Powerplay fixes for RV
- Powerplay fixes for RN
- RAS fixes for Sienna Cichlid
- Blank screen regression fix
- Drop DCN support for aarch64
- Misc other fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210106222721.3934-1-alexander.deucher@amd.com
2021-01-07 10:02:31 +01:00
Marc Kleine-Budde
aee2b3ccc8 can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver
According to the TCAN4550 datasheet "SLLSF91 - DECEMBER 2018" the tcan4x5x has
the same bittiming constants as a m_can revision 3.2.x/3.3.0.

The tcan4x5x chip I'm using identifies itself as m_can revision 3.2.1, so
remove the tcan4x5x specific bittiming values and rely on the values in the
m_can driver, which are selected according to core revision.

Fixes: 5443c226ba ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20201215103238.524029-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07 09:27:19 +01:00
Marc Kleine-Budde
c4aec381ab can: m_can: m_can_class_unregister(): remove erroneous m_can_clk_stop()
In m_can_class_register() the clock is started, but stopped on exit. When
calling m_can_class_unregister(), the clock is stopped a second time.

This patch removes the erroneous m_can_clk_stop() in  m_can_class_unregister().

Fixes: f524f829b7 ("can: m_can: Create a m_can platform framework")
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Sriram Dash <sriram.dash@samsung.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20201215103238.524029-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07 09:27:19 +01:00
Roman Kiryanov
2b29eed3f2 x86/platform: Retire arch/x86/platform/goldfish
The Android Studio Emulator (aka goldfish) does not use
arch/x86/platform/goldfish since 5.4 kernel.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201117025522.1874864-1-rkir@google.com
2021-01-07 09:22:31 +01:00