Commit graph

388,156 commits

Author SHA1 Message Date
Bjorn Helgaas
be7f088bd0 Merge branch 'pci/yinghai-eisa' into for-linus
* pci/yinghai-eisa:
  EISA/PCI: Init EISA early, before PNP
  EISA/PCI: Fix bus res reference
2013-04-02 18:02:28 -06:00
James Hogan
3566d40c1a clk: fix clk_mux::flags kerneldoc
The kerneldoc comment for struct clk_mux documented the non-existent
num_clks instead of flags. Correct this.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-02 16:50:26 -07:00
Asias He
af0d9187f6 tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access
In vhost_scsi_handle_vq:

      tv_tpg = vs->vs_tpg[target];
      if (!tv_tpg) {
              ....
              return
      }

      tv_cmd = vhost_scsi_allocate_cmd(tv_tpg, &v_req,

1) vs->vs_tpg[target] might change after the NULL check and 2) the above
line might access tv_tpg from vs->vs_tpg[target]. To prevent 2), use
ACCESS_ONCE. Thanks mst for catching this up!

Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-02 16:43:34 -07:00
Thomas Graf
5d9633523f openvswitch: Don't insert empty OVS_VPORT_ATTR_OPTIONS attribute
The port specific options are currently unused resulting in an
empty OVS_VPORT_ATTR_OPTIONS nested attribute being inserted
into every OVS_VPORT_CMD_GET message.

Don't insert OVS_VPORT_ATTR_OPTIONS if no options are present.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-04-02 16:31:58 -07:00
Borislav Petkov
73f460408c x86, quirks: Shut-up a long-standing gcc warning
So gcc nags about those since forever in randconfig builds.

arch/x86/kernel/quirks.c: In function ‘ati_ixp4x0_rev’:
arch/x86/kernel/quirks.c:361:4: warning: ‘b’ is used uninitialized in this function [-Wuninitialized]
arch/x86/kernel/quirks.c: In function ‘ati_force_enable_hpet’:
arch/x86/kernel/quirks.c:367:4: warning: ‘d’ may be used uninitialized in this function [-Wuninitialized]
arch/x86/kernel/quirks.c:357:6: note: ‘d’ was declared here
arch/x86/kernel/quirks.c:407:21: warning: ‘val’ may be used uninitialized in this function [-Wuninitialized]

This function quirk is called on a SB400 chipset only anyway so the
distant possibility of a PCI access failing becomes almost impossible
there. Even if it did fail, then something else more serious is the
problem.

So zero-out the variables so that gcc shuts up but do a coarse check
on the PCI accesses at the end and signal whether any of them had an
error. They shouldn't but in case they do, we'll at least know and we
can address it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1362428180-8865-6-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-02 16:03:34 -07:00
Borislav Petkov
1423bed239 x86, msr: Unify variable names
Make sure all MSR-accessing primitives which split MSR values in
two 32-bit parts have their variables called 'low' and 'high' for
consistence with the rest of the code and for ease of staring.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1362428180-8865-5-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-02 16:03:32 -07:00
Borislav Petkov
aca91bfc67 x86-64, docs, mm: Add vsyscall range to virtual address space layout
Add the end of the virtual address space to its layout documentation.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1362428180-8865-4-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-02 16:03:31 -07:00
Borislav Petkov
8e3c2a8cf6 x86: Drop KERNEL_IMAGE_START
We have KERNEL_IMAGE_START and __START_KERNEL_map which both contain the
start of the kernel text mapping's virtual address. Remove the prior one
which has been replicated a lot less times around the tree.

No functionality change.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1362428180-8865-3-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-02 16:03:29 -07:00
Olof Johansson
321ae6fa03 Merge branch 'gic/cleanup' into next/cleanup
* gic/cleanup:
  irqchip: vic: add include of linux/irq.h

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02 15:10:57 -07:00
Olof Johansson
bc895b5987 irqchip: vic: add include of linux/irq.h
With the include of <asm/mach/irq.h> removed, the implicit include of
linux/irq.h also disappeared. Add it back.

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02 15:09:47 -07:00
Axel Lin
37daa8aed1 regulator: ab8500-ext: Don't update info->is_enabled if write to register fails
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:05:39 +01:00
Axel Lin
1ec990c002 regulator: dbx500-prcmu: Remove operating_point from struct dbx500_regulator_info
operating_point is not used since the initial commit of db8500-prcmu driver,
remove it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:05:28 +01:00
Lee Jones
4c84b4ddd4 regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540
Add voltage setting for vdmic; add LP mode setting for vamic1,2.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:44 +01:00
Lee Jones
3fe5228910 regulator: ab8500: Add mode operation for v-amic
v-amic1 and v-amic2 regulators have dedicated mode registers
and share the same mode bit. This patch adds special handling
for those regulators.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:43 +01:00
Lee Jones
d7607baf32 regulator: ab8500: Add new operations for Vaux3
In former functions, only can set Vaux3 to 2.91V, because the
highest bit of Vaux3 register is put into another register. So
add new expanded functions for Vaux3's operation.

Signed-off-by: zhang xiaomei <xiaomei.zhang@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:43 +01:00
Lee Jones
bd44e2cb4a regulator: ab8500: Also check for AB8505 based platforms
Ensure we initialise AB8505 external supply regulators.

Signed-off-by: Alexandre Torgue <alexandre.torgue@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Tested-by: Xiao Mei ZHANG <xiaomei.zhang@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:43 +01:00
Lee Jones
8a3b1b8703 regulator: ab8500: Add voltage selection for AUDIO and ANA on AB8505
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:42 +01:00
Rabin Vincent
f7eae37fcc regulator: ab8500: Don't register external regulators on AB8505
ExtSupply regulators are not included on AB8505 based platforms.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:42 +01:00
Lee Jones
0b94641126 regulator: ab8500: Supply platform specific regulator id values
The regulator ID in the regulator info array should be the same
values as the position of the element within the array.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:42 +01:00
Lee Jones
0fe17e20a6 regulator: ab8500-ext: Add support for AB9540 regulators
Add the support for ab9540 external regulators.

Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:41 +01:00
Lee Jones
35e1d5f634 regulator: ab8500-ext: Remove unused REGULATOR_AB8500_EXT guard
Before the AB8500 External Regulator driver was Mainlined, it used
to be conditionally compiled in using the CONFIG_REGULATOR_AB8500_EXT
flag. During the review process that capability was removed, but the
guard controlling prototyping slipped though the net. This patch
cleans it up.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:41 +01:00
Lee Jones
0fbc800726 ARM: ux500: Use de-globalised version of id.h
Following commit: "7a4f260 ARM: ux500: de-globalize <mach/id.h>",
the use of 'mach/id.h' is no longer valid. This patch continues
the work of the aforementioned commit on patches applied around
the same time, containing the merge-conflict.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02 23:01:41 +01:00
Paul Moore
8b4b9f27e5 x86: remove the x32 syscall bitmask from syscall_get_nr()
Commit fca460f95e simplified the x32
implementation by creating a syscall bitmask, equal to 0x40000000, that
could be applied to x32 syscalls such that the masked syscall number
would be the same as a x86_64 syscall.  While that patch was a nice
way to simplify the code, it went a bit too far by adding the mask to
syscall_get_nr(); returning the masked syscall numbers can cause
confusion with callers that expect syscall numbers matching the x32
ABI, e.g. unmasked syscall numbers.

This patch fixes this by simply removing the mask from syscall_get_nr()
while preserving the other changes from the original commit.  While
there are several syscall_get_nr() callers in the kernel, most simply
check that the syscall number is greater than zero, in this case this
patch will have no effect.  Of those remaining callers, they appear
to be few, seccomp and ftrace, and from my testing of seccomp without
this patch the original commit definitely breaks things; the seccomp
filter does not correctly filter the syscalls due to the difference in
syscall numbers in the BPF filter and the value from syscall_get_nr().
Applying this patch restores the seccomp BPF filter functionality on
x32.

I've tested this patch with the seccomp BPF filters as well as ftrace
and everything looks reasonable to me; needless to say general usage
seemed fine as well.

Signed-off-by: Paul Moore <pmoore@redhat.com>
Link: http://lkml.kernel.org/r/20130215172143.12549.10292.stgit@localhost
Cc: <stable@vger.kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-02 14:38:09 -07:00
Srivatsa S. Bhat
7a0c819d28 x86/mce: Rework cmci_rediscover() to play well with CPU hotplug
Dave Jones reports that offlining a CPU leads to this trace:

numa_remove_cpu cpu 1 node 0: mask now 0,2-3
smpboot: CPU 1 is now offline
BUG: using smp_processor_id() in preemptible [00000000] code:
cpu-offline.sh/10591
caller is cmci_rediscover+0x6a/0xe0
Pid: 10591, comm: cpu-offline.sh Not tainted 3.9.0-rc3+ #2
Call Trace:
 [<ffffffff81333bbd>] debug_smp_processor_id+0xdd/0x100
 [<ffffffff8101edba>] cmci_rediscover+0x6a/0xe0
 [<ffffffff815f5b9f>] mce_cpu_callback+0x19d/0x1ae
 [<ffffffff8160ea66>] notifier_call_chain+0x66/0x150
 [<ffffffff8107ad7e>] __raw_notifier_call_chain+0xe/0x10
 [<ffffffff8104c2e3>] cpu_notify+0x23/0x50
 [<ffffffff8104c31e>] cpu_notify_nofail+0xe/0x20
 [<ffffffff815ef082>] _cpu_down+0x302/0x350
 [<ffffffff815ef106>] cpu_down+0x36/0x50
 [<ffffffff815f1c9d>] store_online+0x8d/0xd0
 [<ffffffff813edc48>] dev_attr_store+0x18/0x30
 [<ffffffff81226eeb>] sysfs_write_file+0xdb/0x150
 [<ffffffff811adfb2>] vfs_write+0xa2/0x170
 [<ffffffff811ae16c>] sys_write+0x4c/0xa0
 [<ffffffff81613019>] system_call_fastpath+0x16/0x1b

However, a look at cmci_rediscover shows that it can be simplified quite
a bit, apart from solving the above issue. It invokes functions that
take spin locks with interrupts disabled, and hence it can run in atomic
context. Also, it is run in the CPU_POST_DEAD phase, so the dying CPU
is already dead and out of the cpu_online_mask. So take these points into
account and simplify the code, and thereby also fix the above issue.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-04-02 14:04:01 -07:00
Jacob Keller
8facd5fb73 net: fix smatch warnings inside datagram_poll
Commit 7d4c04fc17 ("net: add option to enable
error queue packets waking select") has an issue due to operator precedence
causing the bit-wise OR to bind to the sock_flags call instead of the result of
the terniary conditional. This fixes the *_poll functions to work properly. The
old code results in "mask |= POLLPRI" instead of what was intended, which is to
only include POLLPRI when the socket option is enabled.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 16:59:16 -04:00
Roland Stigge
b62d7946b2 MAINTAINERS: Add maintainer for LPC32xx
This patch adds Roland Stigge as maintainer for NXP LPC32xx.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02 13:45:51 -07:00
Ilija Hadzic
a8ec3a6629 drm: correctly restore mappings if drm_open fails
If first drm_open fails, the error-handling path will
incorrectly restore inode's mapping to NULL. This can
cause the crash later on. Fix by separately storing
away mapping pointers that drm_open can touch and
restore each from its own respective variable if the
call fails.

Fixes: https://bugzilla.novell.com/show_bug.cgi?id=807850
(thanks to Michal Hocko for investigating investigating and
finding the root cause of the bug)

Reference:
http://lists.freedesktop.org/archives/dri-devel/2013-March/036564.html

v2: Use one variable to store file and inode mapping
    since they are the same at the function entry.
    Fix spelling mistakes in commit message.

v3: Add reference to the original bug report.

Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de>
Tested-by: Marco Munderloh <munderl@tnt.uni-hannover.de>
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-03 06:44:38 +10:00
Dave Airlie
7cebefe6cc Merge branch 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Oops fixers.
* 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: fix NULL ptr dereference from nv50_disp_intr()
  drm/nouveau: fix handling empty channel list in ioctl's
2013-04-03 06:44:02 +10:00
Guenter Roeck
be0e2f1f7d net/nxp/lpc_eth: Drop ifdef CONFIG_OF_NET
Since of_get_mac_address() is now declared even if CONFIG_OF_NET
is not configured, the ifdef is no longer necessary and can be
removed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 16:43:56 -04:00
Guenter Roeck
6c5f7808ef net/freescale/fec: Simplify OF dependencies
Since of_get_mac_address() is now defined even if CONFIG_OF_NET
is not configured, the ifdef around the code calling it is no longer
necessary and can be removed.

Similar, since of_get_phy_mode() is now defined as dummy function
if OF_NET is not configured, it is no longer necessary to provide
an OF dependent function as front-end. Also, the function depends
on OF_NET, not on OF, so the conditional code was not correct anyway.
Drop the front-end function and call of_get_phy_mode() directly.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 16:43:56 -04:00
Guenter Roeck
509070437d net/cadence/macb: Simplify OF dependencies
With of_get_mac_address() and of_get_phy_mode() now defined as dummy
functions if OF_NET is not configured, it is no longer necessary to
provide OF dependent functions as front-end. Also, the two functions
depend on OF_NET, not on OF, so the conditional code was not correct
anyway.

Drop the front-end functions and call of_get_mac_address() and
of_get_phy_mode() directly instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 16:43:10 -04:00
Guenter Roeck
f9b124901c net/cadence/at91_ether: Simplify OF dependencies
With of_get_mac_address() and of_get_phy_mode() now defined as dummy
functions if OF_NET is not configured, it is no longer necessary to
provide OF dependent functions as front-end. Also, the two functions
depend on OF_NET, not on OF, so the conditional code was not correct
anyway.

Drop the front-end functions and call of_get_mac_address() and
of_get_phy_mode() directly instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 16:43:09 -04:00
Guenter Roeck
65b3841b9c of_net.h: Provide empty functions if OF_NET is not configured
of_get_mac_address() and of_get_phy_mode() are only provided if OF_NET
is configured. While most callers check for the define, not all do, and those
who do require #ifdef around the code. For those who don't, the missing check
can result in errors such as

arch/powerpc/sysdev/tsi108_dev.c:107:3: error: implicit declaration of
	function 'of_get_mac_address' [-Werror=implicit-function-declaration]
arch/powerpc/sysdev/mv64x60_dev.c:253:2: error: implicit declaration of
	function 'of_get_mac_address' [-Werror=implicit-function-declaration]

Provide empty functions if OF_NET is not configured.
This is safe because all callers do check the return values.

Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 16:43:09 -04:00
Dave Airlie
1caa590075 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
One locking regression fix, and a couple of other i915 ones.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm: don't unlock in the addfb error paths
  drm/i915: Fix build failure
  drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2)
  drm/i915: duct-tape locking when eDP init fails
2013-04-03 06:41:15 +10:00
Wanpeng Li
eee53d9218 staging: zcache: fix zcache writeback in debugfs
commit 9c0ad59ef ("zcache/debug: Use an array to initialize/use debugfs attributes")
use an array to initialize/use debugfs attributes, .name = #x, .val = &zcache_##x.
For zcache writeback, this commit set .name = zcache_outstanding_writeback_pages and
.name = zcache_writtenback_pages seperately, however, corresponding .val =
&zcache_zcache_outstanding_writeback_pages and .val = &zcache_zcache_writtenback_pages,
which are not correct.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 12:55:37 -07:00
Wanpeng Li
380cb19e40 staging: zcache: fix pers_pageframes|_max aren't exported in debugfs
Before commit 9c0ad59ef ("zcache/debug: Use an array to initialize/use
debugfs attributes"), pers_pageframes|_max are exported in debugfs, but
this commit forgot use array export pers_pageframes|_max. This patch add
pers_pageframes|_max back.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 12:55:37 -07:00
Wanpeng Li
b0749e77ae staging: zcache: handle zcache_[eph|pers]_zpages for zero-filled page
Increment/decrement zcache_[eph|pers]_zpages for zero-filled pages,
the main point of the counters for zpages and pageframes is to be
able to calculate density == zpages/pageframes. A zero-filled page
becomes a zpage that "compresses" to zero bytes and, as a result,
requires zero pageframes for storage. So the zpages counter should
be increased but the pageframes counter should not.

[Dan Magenheimer <dan.magenheimer@oracle.com>: patch description]
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 12:49:51 -07:00
Wanpeng Li
8762c7dde7 staging: zcache: zero-filled pages awareness
Compression of zero-filled pages can unneccessarily cause internal
fragmentation, and thus waste memory. This special case can be
optimized.

This patch captures zero-filled pages, and marks their corresponding
zcache backing page entry as zero-filled. Whenever such zero-filled
page is retrieved, we fill the page frame with zero.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 12:49:51 -07:00
Wanpeng Li
bdcde42d74 staging: zcache: introduce zero-filled pages handler
Introduce zero-filled pages handler to capture and handle zero pages.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 12:49:51 -07:00
Bob Liu
6fd3d05a8f drivers: staging: zcache: fix compile warning
Fix below compile warning:
staging/zcache/zcache-main.c: In function ‘zcache_autocreate_pool’:
staging/zcache/zcache-main.c:1393:13: warning: ‘cli’ may be used uninitialized
in this function [-Wuninitialized]

Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 12:43:41 -07:00
Bob Liu
555ee46f58 drivers: staging: zcache: fix compile error
Because 'ramster_debugfs_init' is not defined if !CONFIG_DEBUG_FS, there is
compile error:

$ make drivers/staging/zcache/
staging/zcache/ramster/ramster.c: In function ‘ramster_init’:
staging/zcache/ramster/ramster.c:981:2: error: implicit declaration of
function ‘ramster_debugfs_init’ [-Werror=implicit-function-declaration]

This patch fix it and reduce some #ifdef CONFIG_DEBUG_FS in .c files the same
way.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 12:43:41 -07:00
Greg Kroah-Hartman
6d3a63790c Third round of IIO cleanups, graduations and new stuff for the 3.10 cycle.
A small set including 3 things.
 1) A short cleanup series for the ak8975.
 2) Graduation of ak8975 out of staging.
 3) Some additional bits for the at91 adc driver to cover low resolution
    modes, sleep and a little bit of missing documentation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRWyOiAAoJEFSFNJnE9BaIQa8QALIgb//+AvAWg1pVkIJVkA0y
 U0lKA94ynO+WXM7jcWonDfjx02/lyWdNd5gSSbujtxOeanIg29c/RK3vJ4a1Y7Tq
 7b0nzSuX//9F6VsUafF+h8WAmjVLIY+yN/ovGB8s5RzvSj4TsU6lcnxtjp2KV5Os
 koxURUtVF9xwdUIdNHE++zp6vT0EYVhUzOC1WQZxpooUf6UJtTmDLiL1D+b7guWO
 Pc+zW5TWdN1db15XUPhnzVnA/aBGeTM+y9y/Eh9v4IW2oMS4lqjFIdKRFBQ+Yf9k
 4mm7gj5cXxMj2K1GGhofJUvgm++gXkcReXDvI8fXwlKOM+DJNqoYQ0aqk4XdzNch
 T/JOUR1rF9ZE3SlaD2diELFfrzp4WDZti0czW9qduqQh/Rjc7RAkWMngaOJKMfrE
 hdao5TKGfhY4YfBLROPddNesqlNlcppFlEmAeybyw3R8kuPc7Jihv5HzMpIg0gtN
 pz3ATWYwtRP7dATvmTmcvZedaMvIEpqajZKPjONFq/TSoXpubtmxxOq2frHz+FrG
 7VMsSrKyoLsC0jMkwsJzpPTUMJgjOthxii3DlNO/YgzTcj0gspgEN+Pm+s6xX4Mv
 N4t5r8c9jPTCWC/W6wpwIeIFCCdyPrjr+gMegKnM3bbLT9JHiGWnodsJ4lzwL/pI
 yGivjxp+srOqcpDX3l+V
 =HIcb
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.10c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:
	Third round of IIO cleanups, graduations and new stuff for the 3.10 cycle.

	A small set including 3 things.
	1) A short cleanup series for the ak8975.
	2) Graduation of ak8975 out of staging.
	3) Some additional bits for the at91 adc driver to cover low resolution
	   modes, sleep and a little bit of missing documentation.
2013-04-02 12:37:02 -07:00
Jesse Barnes
934e882201 drm/i915: drop DPFLIPSTAT enables on VLV v3
We don't need this until we start using the wait event commands.

v2: move to i915_irq.c (Jesse)
    drop unneeded sprite flip done enables (Ville)
v3: drop the DPFLIPSTAT enables altogether (Ville)

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-02 21:04:42 +02:00
Jesse Barnes
a0e4e199ad drm/i915: add Punit read/write routines for VLV v2
Slightly different than other platforms.

v2 [Jani]: Fix IOSF_BYTE_ENABLES_SHIFT shift. Use common routine.
v3: drop turbo defines from this patch (Ville)
    use PCI_DEVFN(2,0) instead of open coding (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Add checkpatch bikeshed about missing space.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-02 21:00:06 +02:00
Jesse Barnes
453c542059 drm/i915: panel power sequencing for VLV eDP v2
PPS register offsets have changed in Valleyview.

v2: don't clobber port select bits on VLV when fixing up PPS timings
    don't bother with G4x PPS regs (Jani)

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-02 20:54:31 +02:00
Jesse Barnes
b2634017b2 drm/i915/dp: fix up VLV DP handling v2
Needed to handle pre/post enable/disable paths on VLV and avoid a few
fields that are marked reserved on VLV.

v2: don't set color range or DP PLL fields (Jani)

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-02 20:49:18 +02:00
Reilly Grant
990454b5a4 VSOCK: Handle changes to the VMCI context ID.
The VMCI context ID of a virtual machine may change at any time. There
is a VMCI event which signals this but datagrams may be processed before
this is handled. It is therefore necessary to be flexible about the
destination context ID of any datagrams received. (It can be assumed to
be correct because it is provided by the hypervisor.) The context ID on
existing sockets should be updated to reflect how the hypervisor is
currently referring to the system.

Signed-off-by: Reilly Grant <grantr@vmware.com>
Acked-by: Andy King <acking@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 14:39:17 -04:00
Balakumaran Kannan
25fb6ca4ed net IPv6 : Fix broken IPv6 routing table after loopback down-up
IPv6 Routing table becomes broken once we do ifdown, ifup of the loopback(lo)
interface. After down-up, routes of other interface's IPv6 addresses through
'lo' are lost.

IPv6 addresses assigned to all interfaces are routed through 'lo' for internal
communication. Once 'lo' is down, those routing entries are removed from routing
table. But those removed entries are not being re-created properly when 'lo' is
brought up. So IPv6 addresses of other interfaces becomes unreachable from the
same machine. Also this breaks communication with other machines because of
NDISC packet processing failure.

This patch fixes this issue by reading all interface's IPv6 addresses and adding
them to IPv6 routing table while bringing up 'lo'.

==Testing==
Before applying the patch:
$ route -A inet6
Kernel IPv6 routing table
Destination                    Next Hop                   Flag Met Ref Use If
2000::20/128                   ::                         U    256 0     0 eth0
fe80::/64                      ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1     1 lo
::1/128                        ::                         Un   0   1     0 lo
2000::20/128                   ::                         Un   0   1     0 lo
fe80::xxxx:xxxx:xxxx:xxxx/128  ::                         Un   0   1     0 lo
ff00::/8                       ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1     1 lo
$ sudo ifdown lo
$ sudo ifup lo
$ route -A inet6
Kernel IPv6 routing table
Destination                    Next Hop                   Flag Met Ref Use If
2000::20/128                   ::                         U    256 0     0 eth0
fe80::/64                      ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1     1 lo
::1/128                        ::                         Un   0   1     0 lo
ff00::/8                       ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1     1 lo
$

After applying the patch:
$ route -A inet6
Kernel IPv6 routing
table
Destination                    Next Hop                   Flag Met Ref Use If
2000::20/128                   ::                         U    256 0     0 eth0
fe80::/64                      ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1     1 lo
::1/128                        ::                         Un   0   1     0 lo
2000::20/128                   ::                         Un   0   1     0 lo
fe80::xxxx:xxxx:xxxx:xxxx/128  ::                         Un   0   1     0 lo
ff00::/8                       ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1     1 lo
$ sudo ifdown lo
$ sudo ifup lo
$ route -A inet6
Kernel IPv6 routing table
Destination                    Next Hop                   Flag Met Ref Use If
2000::20/128                   ::                         U    256 0     0 eth0
fe80::/64                      ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1     1 lo
::1/128                        ::                         Un   0   1     0 lo
2000::20/128                   ::                         Un   0   1     0 lo
fe80::xxxx:xxxx:xxxx:xxxx/128  ::                         Un   0   1     0 lo
ff00::/8                       ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1     1 lo
$

Signed-off-by: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com>
Signed-off-by: Maruthi Thotad <Maruthi.Thotad@ap.sony.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 14:37:19 -04:00
Paul Gortmaker
5e404cd658 ipconfig: add informative timeout messages while waiting for carrier
Commit 3fb72f1e6e ("ipconfig wait
for carrier") added a "wait for carrier on at least one interface"
policy, with a worst case maximum wait of two minutes.

However, if you encounter this, you won't get any feedback from
the console as to the nature of what is going on.  You just see
the booting process hang for two minutes and then continue.

Here we add a message so the user knows what is going on, and
hence can take action to rectify the situation (e.g. fix network
cable or whatever.)  After the 1st 10s pause, output now begins
that looks like this:

	Waiting up to 110 more seconds for network.
	Waiting up to 100 more seconds for network.
	Waiting up to 90 more seconds for network.
	Waiting up to 80 more seconds for network.
	...

Since most systems will have no problem getting link/carrier in the
1st 10s, the only people who will see these messages are people with
genuine issues that need to be resolved.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 14:35:33 -04:00
Neil Horman
f7f2287426 forcedeth: Do a dma_mapping_error check after skb_frag_dma_map
This backtrace was recently reported on a 3.9 kernel:

Actual results: from syslog /var/log/messsages:
kernel: [17539.340285] ------------[ cut here ]------------
kernel: [17539.341012] WARNING: at lib/dma-debug.c:937 check_unmap+0x493/0x960()
kernel: [17539.341012] Hardware name: MS-7125
kernel: [17539.341012] forcedeth 0000:00:0a.0: DMA-API: device driver failed to
check map error[device address=0x0000000013c88000] [size=544 bytes] [mapped as
page]
kernel: [17539.341012] Modules linked in: fuse ebtable_nat ipt_MASQUERADE
nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_nat nf_nat_ipv6
ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
nf_conntrack bnep bluetooth rfkill ebtable_filter ebtables ip6table_filter
ip6_tables snd_hda_codec_hdmi snd_cmipci snd_mpu401_uart snd_hda_intel
snd_intel8x0 snd_opl3_lib snd_ac97_codec gameport snd_hda_codec snd_rawmidi
ac97_bus snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer snd
k8temp soundcore serio_raw i2c_nforce2 forcedeth ata_generic pata_acpi nouveau
video mxm_wmi wmi i2c_algo_bit drm_kms_helper ttm drm i2c_core sata_sil pata_amd
sata_nv uinput
kernel: [17539.341012] Pid: 17340, comm: sshd Not tainted
3.9.0-0.rc4.git0.1.fc19.i686.PAE #1
kernel: [17539.341012] Call Trace:
kernel: [17539.341012]  [<c045573c>] warn_slowpath_common+0x6c/0xa0
kernel: [17539.341012]  [<c0701953>] ? check_unmap+0x493/0x960
kernel: [17539.341012]  [<c0701953>] ? check_unmap+0x493/0x960
kernel: [17539.341012]  [<c04557a3>] warn_slowpath_fmt+0x33/0x40
kernel: [17539.341012]  [<c0701953>] check_unmap+0x493/0x960
kernel: [17539.341012]  [<c049238f>] ? sched_clock_cpu+0xdf/0x150
kernel: [17539.341012]  [<c0701e87>] debug_dma_unmap_page+0x67/0x70
kernel: [17539.341012]  [<f7eae8f2>] nv_unmap_txskb.isra.32+0x92/0x100

Its pretty plainly the result of an skb fragment getting unmapped without having
its initial mapping operation checked for errors.  This patch corrects that.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 14:32:24 -04:00