Commit graph

1,215,304 commits

Author SHA1 Message Date
Vincent Whitchurch
284779dbf4 net: stmmac: Apply redundant write work around on 4.xx too
commit a3a57bf07d ("net: stmmac: work
around sporadic tx issue on link-up") worked around a problem with TX
sometimes not working after a link-up by avoiding a redundant write to
MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems
with handling multiple writes to that register in some cases.

That commit however only added the work around to dwmac_lib.c (apart
from the common code in stmmac_main.c), but my systems with version
4.21a of the IP exhibit the same problem, so add the work around to
dwmac4_lib.c too.

Fixes: a3a57bf07d ("net: stmmac: work around sporadic tx issue on link-up")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721-stmmac-tx-workaround-v1-1-9411cbd5ee07@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 11:03:55 +02:00
Maciej W. Rozycki
0859bdf1ac Revert MIPS: Loongson: Fix build error when make modules_install
Revert commit 531b3d1195 ("MIPS: Loongson: Fix build error when make
modules_install"), which made `-march=loongson2e', `-march=loongson2f',
and `-march=loongson3a' compilation options probed for even though GCC
has supported them since 4.4.0, 4.4.0, and 4.6.0 respectively, which is
below our current minimum requirement of 5.1, in an attempt to work
around for the `cc-option' `make' function being undefined with `make'
targets that do not use the compiler.  The workaround has now been made
obsolete, by querying the `need-compiler' variable instead so as to make
sure the compiler isn't called for non-build targets.

Verified with `fuloong2e_defconfig' and the `modules_install' target.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-07-25 10:42:01 +02:00
Maciej W. Rozycki
4fe4a6374c MIPS: Only fiddle with CHECKFLAGS if `need-compiler'
We have originally guarded fiddling with CHECKFLAGS in our arch Makefile
by checking for the CONFIG_MIPS variable, not set for targets such as
`distclean', etc. that neither include `.config' nor use the compiler.

Starting from commit 805b2e1d42 ("kbuild: include Makefile.compiler
only when compiler is needed") we have had a generic `need-compiler'
variable explicitly telling us if the compiler will be used and thus its
capabilities need to be checked and expressed in the form of compilation
flags.  If this variable is not set, then `make' functions such as
`cc-option' are undefined, causing all kinds of weirdness to happen if
we expect specific results to be returned, most recently:

cc1: error: '-mloongson-mmi' must be used with '-mhard-float'

messages with configurations such as `fuloong2e_defconfig' and the
`modules_install' target, which does include `.config' and yet does not
use the compiler.

Replace the check for CONFIG_MIPS with one for `need-compiler' instead,
so as to prevent the compiler from being ever called for CHECKFLAGS when
not needed.

Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Closes: https://lore.kernel.org/r/85031c0c-d981-031e-8a50-bc4fad2ddcd8@collabora.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 805b2e1d42 ("kbuild: include Makefile.compiler only when compiler is needed")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-07-25 10:42:01 +02:00
Maciej W. Rozycki
a79a404e6c MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression
Remove a build-time check for the presence of the GCC `-msym32' option.
This option has been there since GCC 4.1.0, which is below the minimum
required as at commit 805b2e1d42 ("kbuild: include Makefile.compiler
only when compiler is needed"), when an error message:

arch/mips/Makefile:306: *** CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32.  Stop.

started to trigger for the `modules_install' target with configurations
such as `decstation_64_defconfig' that set CONFIG_CPU_DADDI_WORKAROUNDS,
because said commit has made `cc-option-yn' an undefined function for
non-build targets.

Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 805b2e1d42 ("kbuild: include Makefile.compiler only when compiler is needed")
Cc: stable@vger.kernel.org # v5.13+
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-07-25 10:42:01 +02:00
Rob Herring
657c45b303 MIPS: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-07-25 10:42:01 +02:00
Dan Carpenter
cf10b0bb50 media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init()
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;".  Normally, this is done
inside the vdec_msg_queue_deinit() function.  However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op.  For that situation, just
set the size to zero explicitly and return.

There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err.

Fixes: b199fe46f3 ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Fixes: 2f5d0aef37 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 10:35:00 +02:00
Dan Carpenter
be40f524b6 media: mediatek: vcodec: fix potential double free
The "lat_buf->private_data" needs to be set to NULL to prevent a
double free.  How this would happen is if vdec_msg_queue_init() failed
twice in a row and on the second time it failed earlier than on the
first time.

The vdec_msg_queue_init() function has a loop which does:
	for (i = 0; i < NUM_BUFFER_COUNT; i++) {

Each iteration initializes one element in the msg_queue->lat_buf[] array
and then the clean up function vdec_msg_queue_deinit() frees each
element of the msg_queue->lat_buf[] array.  This clean up code relies
on the assumption that every element is either initialized or zeroed.
Leaving a freed pointer which is non-zero breaks the assumption.

Fixes: b199fe46f3 ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 10:35:00 +02:00
Suman Ghosh
4e62c99d71 octeontx2-af: Fix hash extraction enable configuration
As of today, hash extraction support is enabled for all the silicons.
Because of which we are facing initialization issues when the silicon
does not support hash extraction. During creation of the hardware
parsing table for IPv6 address, we need to consider if hash extraction
is enabled then extract only 32 bit, otherwise 128 bit needs to be
extracted. This patch fixes the issue and configures the hardware parser
based on the availability of the feature.

Fixes: a95ab93550 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721061222.2632521-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 10:12:26 +02:00
Alexander Stein
461f1f6728 ARM: dts: imx6qdl-mba6: Add missing supply regulator for lm75 and at24
Fixes the warnings:
at24 0-0057: supply vcc not found, using dummy regulator
lm75 0-0049: supply vs not found, using dummy regulator

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-25 15:46:48 +08:00
Krzysztof Kozlowski
0d0e727f7e ARM: dts: imx1-apf9328: correct ethernet reg addresses (split)
The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-25 15:46:48 +08:00
Fabio Estevam
8cf71125e1 ARM: dts: imx7d-sdb: Pass the Ethernet aliases
Describe the Ethernet aliases so that the second MAC address
can be retrieved from the bootloader.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-25 15:46:48 +08:00
Krzysztof Kozlowski
38633443c6 ARM: dts: nxp: add missing space before {
Add missing whitespace between node name/label and opening {.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-25 15:46:38 +08:00
Irui Wang
dfa2d6e074 media: mediatek: vcodec: Return NULL if no vdec_fb is found
"fb_use_list" is used to store used or referenced frame buffers for
vp9 stateful decoder. "NULL" should be returned when getting target
frame buffer failed from "fb_use_list", not a random unexpected one.

Fixes: f77e89854b ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:44:27 +02:00
Xiaoyong Lu
89a4f369b2 media: mediatek: vcodec: fix AV1 decode fail for 36bit iova
Fix av1 decode fail when iova is 36bit.

Decoder hardware will access incorrect iova address when tile buffer is
36bit, it will lead to iommu fault when hardware access dram data.

Fixes: 2f5d0aef37 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Xiaoyong Lu<xiaoyong.lu@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:44:27 +02:00
Nícolas F. R. A. Prado
fe8a339783 media: mediatek: vcodec: Read HW active status from syscon
Remove the requirement of a VDEC_SYS reg iospace for both MT8173 and
MT8183. To achieve that, rely on a vdecsys syscon to be passed through
the DT, and use it to directly read the VDEC_HW_ACTIVE bit during IRQ
handling to check whether the HW is active. Also update the VP8 stateful
decoder to use the syscon, if present, for writes to VDEC_SYS.

The old behavior is still present when reg-names aren't supplied, as
to keep backward compatibility.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added vdecsys_regmap kerneldoc line provided by Nicolas]
2023-07-25 09:44:26 +02:00
Nícolas F. R. A. Prado
c332621712 media: mediatek: vcodec: Define address for VDEC_HW_ACTIVE
The VDEC_HW_ACTIVE bit is located at offset 0, bit 4 of the VDECSYS
iospace. Only the mask was previously defined, with the address being
implicit. Explicitly define the address, and append a '_MASK' suffix to
the mask, to make accesses to this bit clearer.

This commit brings no functional change.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:44:26 +02:00
Nícolas F. R. A. Prado
5ee1b02a39 media: dt-bindings: mediatek,vcodec: Remove VDEC_SYS register space
The binding expects the first register space to be VDEC_SYS. However
this register space is already assigned to a different node on both
MT8173 and MT8183: a clock-controller node called 'vdecsys' which is
also a syscon.

In order to resolve the overlapping address ranges, remove the VDEC_SYS
register space from the video decoder, and add a new property to hold
the phandle to the syscon, so that iospace can still be handled.

Also add reg-names to be able to tell that this new register schema is
used, so the driver can keep backward compatibility.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:44:26 +02:00
Nícolas F. R. A. Prado
4115cd8cf7 media: dt-bindings: mediatek,vcodec: Don't require assigned-clocks
On MT8183 it's not necessary to configure the parent for the clocks.
Remove the assigned-clocks and assigned-clock-parents from the required
list.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:44:26 +02:00
Nícolas F. R. A. Prado
93b9368de8 media: dt-bindings: mediatek,vcodec: Allow single clock for mt8183
MT8173 and MT8183 have different clocks, and consequently clock-names.
Relax the number of clocks and set clock-names based on compatible.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:44:26 +02:00
Dan Carpenter
251301e283 media: mediatek: vcodec: Improve an error message
This is intended to print the error code but there is a typo so it
prints IS_ERR() instead of PTR_ERR().

Fixes: 77f3b023f452 ("media: mediatek: vcodec: Add debugfs interface to get debug information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:44:26 +02:00
Dan Carpenter
b19c347b12 media: mediatek: vcodec: Fix potential crash in mtk_vcodec_dbgfs_remove()
The list iterator "dbgfs_inst" is always non-NULL.  This means that the
test for NULL inside the loop is unnecessary and it also means that the
test for NULL outside the loop will not work.  If we do not find the item
on the list with the correct the ctx_id then it will free invalid memory
leading to a crash.

Fixes: cd403a6a0419 ("media: mediatek: vcodec: Add a debugfs file to get different useful information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:44:26 +02:00
Suman Ghosh
ec87f05402 octeontx2-af: Install TC filter rules in hardware based on priority
As of today, hardware does not support installing tc filter
rules based on priority. This patch adds support to install
the hardware rules based on priority. The final hardware rules
will not be dependent on rule installation order, it will be strictly
priority based, same as software.

Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721043925.2627806-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 09:44:19 +02:00
Hal Feng
f2b539af57 riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
Add temperature sensor and thermal-zones support for
the StarFive JH7110 SoC. CPUFreq cooling is supported
in thermal-zones.

Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-07-25 08:41:54 +01:00
Hal Feng
65e4a0f33a riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
Add temperature sensor and thermal-zones support for
the StarFive JH7100 SoC.

Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-07-25 08:41:54 +01:00
Samin Guo
0104340a67 riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
v1.3B:
  v1.3B uses motorcomm YT8531(rgmii-id phy) x2, need delay and
  inverse configurations.
  The tx_clk of v1.3B uses an external clock and needs to be
  switched to an external clock source.

v1.2A:
  v1.2A gmac0 uses motorcomm YT8531(rgmii-id) PHY, and needs delay
  configurations.
  v1.2A gmac1 uses motorcomm YT8512(rmii) PHY, and needs to
  switch rx and rx to external clock sources.

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
[conor: squashed a fix from Samin to use the actual properties]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-07-25 08:41:54 +01:00
Christophe JAILLET
e354f67733 drm/i915: Fix an error handling path in igt_write_huge()
All error handling paths go to 'out', except this one. Be consistent and
also branch to 'out' here.

Fixes: c10a652e23 ("drm/i915/selftests: Rework context handling in hugepages selftests")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7a036b88671312ee9adc01c74ef5b3376f690b76.1689619758.git.christophe.jaillet@wanadoo.fr
(cherry picked from commit 361ecaadb1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-25 08:38:12 +01:00
Radhakrishna Sripada
3844ed5e78 drm/i915/dpt: Use shmem for dpt objects
Dpt objects that are created from internal get evicted when there is
memory pressure and do not get restored when pinned during scanout. The
pinned page table entries look corrupted and programming the display
engine with the incorrect pte's result in DE throwing pipe faults.

Create DPT objects from shmem and mark the object as dirty when pinning so
that the object is restored when shrinker evicts an unpinned buffer object.

v2: Unconditionally mark the dpt objects dirty during pinning(Chris).

Fixes: 0dc987b699 ("drm/i915/display: Add smem fallback allocation for dpt")
Cc: <stable@vger.kernel.org> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718225118.2562132-1-radhakrishna.sripada@intel.com
(cherry picked from commit e91a777a6e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-25 08:38:09 +01:00
Christophe JAILLET
2deed4cda3 clk: imx: clk-gpr-mux: Simplify .determine_rate()
imx_clk_gpr_mux_determine_rate() is the same as __clk_mux_determine_rate(),
so use the latter to save some LoC.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/ac8bd50c41b84f244bb0ec94e8aed25c513c9037.1688760152.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-07-25 10:35:10 +03:00
Paolo Abeni
34192a2f46 Merge branch 'fix-up-dev-flags-when-add-p2p-down-link'
Hangbin Liu says:

====================
Fix up dev flags when add P2P down link

When adding p2p interfaces to bond/team. The POINTOPOINT, NOARP flags are
not inherit to up devices. Which will trigger IPv6 DAD. Since there is
no ethernet MAC address for P2P devices. This will cause unexpected DAD
failures.
====================

Link: https://lore.kernel.org/r/20230721040356.3591174-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 09:32:30 +02:00
Ming Qian
5bd28eae48 media: amphion: ensure the bitops don't cross boundaries
the supported_instance_count determine the instance index range,
it shouldn't exceed the bits number of instance_mask,
otherwise the bitops of instance_mask may cross boundaries

Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:49 +02:00
Ming Qian
cf6a063549 media: amphion: fix UNUSED_VALUE issue reported by coverity
assign value '-EINVAL' to ret, but the stored value is overwritten
before it can be used

Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:49 +02:00
Ming Qian
c224d0497a media: amphion: fix UNINIT issues reported by coverity
using uninitialized value may introduce risk

Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:49 +02:00
Ming Qian
79d3bafaec media: amphion: fix REVERSE_INULL issues reported by coverity
null-checking of a pointor is suggested before dereferencing it

Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:49 +02:00
Ming Qian
b237b058ad media: amphion: fix CHECKED_RETURN issues reported by coverity
calling "vpu_cmd_send/vpu_get_buffer_state/vpu_session_alloc_fs"
without checking return value

Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:49 +02:00
Benjamin Gaignard
f000e6ca2d media: rkvdec: increase max supported height for H.264
After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:49 +02:00
Ming Qian
b69713f502 media: amphion: decoder support display delay for all formats
the firmware only support low latency mode for h264,
but firmware will notify an event to driver
when one frame is decoded,
if V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
and V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY is set to 0,
driver can display the decoded frame immediately.

Fixes: ffa331d9bf ("media: amphion: decoder implement display delay enable")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:49 +02:00
Zheng Wang
c677d7ae83 media: mtk-jpeg: Fix use after free bug due to uncanceled work
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work. Then mtk_jpeg_dec_device_run
and mtk_jpeg_enc_device_run may be called to start the
work.
If we remove the module which will call mtk_jpeg_remove
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.

Fix it by canceling the work before cleanup in the mtk_jpeg_remove

CPU0                  CPU1

                    |mtk_jpeg_job_timeout_work
mtk_jpeg_remove     |
  v4l2_m2m_release  |
    kfree(m2m_dev); |
                    |
                    | v4l2_m2m_get_curr_priv
                    |   m2m_dev->curr_ctx //use
Fixes: b2f0d2724b ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:48 +02:00
Michael Tretter
b3b4c9d3cb media: verisilicon: Fix TRY_FMT on encoder OUTPUT
Commit f100ce3bbd ("media: verisilicon: Fix crash when probing
encoder") removed vpu_fmt from hantro_try_fmt(), since it was
initialized from vpu_dst_fmt, which may not be initialized, when TRY_FMT
is called. It was replaced by fmt, which is found using the pixelformat.

For the encoder, this changed the fmt to contain the raw format instead
of the coded format. The format constraints as of fmt->frmsize are only
valid for the coded format and are 0 for the raw formats. Therefore, the
size of a encoder OUTPUT device is constrained to 0 and the
v4l2-compliance tests for G_FMT, TRY_FMT, and SET_FMT fail.

Bring back vpu_fmt to use the coded format on an encoder OUTPUT device,
but initialize it using the currently set pixelformat on dst_fmt, which
is the coded format on an encoder.

Fixes: f100ce3bbd ("media: verisilicon: Fix crash when probing encoder")
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:48 +02:00
Emma Christy
3194d514ea media: rkvdec: removed redundant blank line
Adhere to Linux kernel coding style. Removed redundant blank line.
Issue found by checkpatch.

Signed-off-by: Emma Christy <emma.t.christy@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:48 +02:00
Juerg Haefliger
cd37409f1f media: meson: vdec: Add MODULE_FIRMWARE macro
The meson-vdec module loads firmware so add MODULE_FIRMWARE macros to
provide that information via modinfo.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:48 +02:00
Ming Qian
12cd8b8ac0 media: amphion: add helper function to get id name
convert numbers into meaningful names,
then it can improve the log readability

Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:48 +02:00
Ming Qian
73e3f09292 media: amphion: reinit vpu if reqbufs output 0
according to v4l2 stateful decoder document 4.5.1.3. State Machine,
the state should change from seek to initialization
if call VIDIOC_REQBUFS(OUTPUT, 0).

so reinit the vpu decoder if reqbufs output 0

Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:31:48 +02:00
Jacky Bai
07ba6d1ae5 clk: imx: Add 519.75MHz frequency support for imx9 pll
For video pll, it may need 519.75MHz clock frequency for
the LVDS display usage. So add 519.75MHz frequency config
support for video pll.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230628061724.2056520-3-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-07-25 10:28:42 +03:00
Chancel Liu
3ea5704860 clk: imx93: Add PDM IPG clk
The IPG clk and MCLK of PDM share the same control gate.

Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230628061724.2056520-2-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-07-25 10:28:42 +03:00
Chancel Liu
2fe182dd27 dt-bindings: clock: imx93: Add PDM IPG clk
Add PDM IPG clk.

Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230628061724.2056520-1-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-07-25 10:28:42 +03:00
Hans Verkuil
c62b089163 media: pci: saa7164: replace BUG with error return
It was completely unnecessary to use BUG in saa7164_s_frequency,
just return an error instead. This also solves a smatch error:

drivers/media/pci/saa7164/saa7164-encoder.c:388 saa7164_s_frequency() error: potentially dereferencing uninitialized 'tsport'.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:31 +02:00
Hans Verkuil
2e1796fd49 media: pci: cx23885: replace BUG with error return
It was completely unnecessary to use BUG in buffer_prepare().
Just replace it with an error return. This also fixes a smatch warning:

drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:31 +02:00
Hans Verkuil
466ae77a8c staging: media: tegra-video: include video.h header
This tells sparse that tegra_vip_driver is actually used,
and so avoids this warning:

drivers/staging/media/tegra-video/vip.c:280:31: warning: 'tegra_vip_driver' defined but not used [-Wunused-variable]
  280 | static struct platform_driver tegra_vip_driver = {
      |                               ^~~~~~~~~~~~~~~~

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2023-07-25 09:24:31 +02:00
Hans Verkuil
c8f0e92490 staging: media: sun6i-isp: drop of_match_ptr for ID table
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not make any sense.

This also fixes this !CONFIG_OF error:

drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.c:529:34: warning: 'sun6i_isp_of_match' defined but not used [-Wunused-const-variable=]
  529 | static const struct of_device_id sun6i_isp_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2023-07-25 09:24:30 +02:00
Hans Verkuil
ee630b29ea media: tuners: qt1010: replace BUG_ON with a regular error
BUG_ON is unnecessary here, and in addition it confuses smatch.
Replacing this with an error return help resolve this smatch
warning:

drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00