Commit graph

1,215,304 commits

Author SHA1 Message Date
Ming Qian
d196d01c70 MAINTAINERS: update amphion vpu driver entry
Shijie has not been actively working on the driver,
his e-mail address is bouncing for quite awhile now.
remove him from the maintainer list here.
I do want to thank him for his work on the driver.

Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Andy Shevchenko
78e9ab0f74 media: drxk: Use %*ph for printing hexdump of a small buffer
The kernel already has a helper to print a hexdump of a small
buffer via pointer extension. Use that instead of open coded
variant.

In long term it helps to kill pr_cont() or at least narrow down
its use.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Tomi Valkeinen
906a6c1c45 media: i2c: ds90ub913: Fix a warning about use of uninitialized variable
Fix the following warning:

drivers/media/i2c/ds90ub913.c:488:9: warning: 'v' may be used uninitialized [-Wmaybe-uninitialized]
  488 |         ub913_write(priv, UB913_REG_GENERAL_CFG,
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  489 |                     v | UB913_REG_GENERAL_CFG_CRC_ERR_RESET);
      |                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/ds90ub913.c:477:12: note: 'v' was declared here
  477 |         u8 v, v1, v2;
      |            ^

Fix the warning by initializing the variable to 0. Proper error handling
here would be somewhat pointless, as we are just printing register
values, and the user will see an error about the failed i2c transaction.

Fixes: c158d0d4ff ("media: i2c: add DS90UB913 driver")
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Closes: https://lore.kernel.org/all/a0180488-f7f5-8538-a8bb-52ae52912835@xs4all.nl/
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Thomas Zimmermann
b4f470aef4 media: Remove flag FBINFO_FLAG_DEFAULT from fbdev drivers
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by kzalloc(). So do not
set it.

Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.

v2:
	* fix commit message (Miguel)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Tomi Valkeinen
c8c7ed99f0 media: ti: cal: Implement get_frame_desc for camera-rx
CAL uses get_frame_desc to get the VC and DT for the incoming CSI-2
stream, but does it in a bit hacky way. Clean this up by implementing
.get_frame_desc to camera-rx, and calling that from cal.c.

No functional change intended.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Tomi Valkeinen
e7bbe653fd media: ti: cal: Use subdev state
Change TI CAL driver to use subdev state. No functional changes
(intended).

This allows us to get rid of the 'formats' field, as the formats are
kept in the state, and also the 'mutex' as we already have state locking.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Tomi Valkeinen
2633288acc media: ti: cal: Fix cal_camerarx_create() error handling
We don't do a proper job at freeing resources in cal_camerarx_create's
error paths.

Fix these, and also switch the phy allcation from kzalloc to
devm_kzalloc to simplify the code further.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Tomi Valkeinen
662cf98d17 media: ti: cal: Clean up mbus formats uses
Clean up the CAL drivers uses of mbus formats:

- Switch all YUV formats from 2X8 formats to 1X16, as those are what
  should be used for CSI-2 bus.

- Drop 24 and 32 bit formats, as the driver doesn't support them (see
  cal_ctx_pix_proc_config()).

- Switch RGB565_2X8_LE to RGB565_1X16 (for the same reason as for the
  YUV formats) and drop RGB565_2X8_BE as it cannot be supported with
  CSI-2.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Martin Kepplinger
cd063027c3 media: imx: Unstage the imx8mq-mipi-csi2 driver
The imx8mq-mipi-csi2 MIPI CSI-2 receiver driver is used and maintained.
There is no reason to keep it in staging. The accompanying CSI bridge
driver that uses it is in drivers/media/platform/nxp as well.

One TODO is to get rid of csi_state's "state" and "lock" variables.
Especially make sure suspend/resume is working without them. That can
very well be worked on from the new location.

Also add a MAINTAINERS section for the imx8mq-mipi-csi2 mipi receiver
driver.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Nikolay Kyx
3180449e6c staging: media: ipu3: code style fix - avoid multiple line dereference
This patch fixes the following checkpatch.pl warning:

WARNING: Avoid multiple line dereference

in file ipu3-css.c

Signed-off-by: Nikolay Kyx <knv418@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-25 09:24:30 +02:00
Hangbin Liu
fa532bee17 team: reset team's flags when down link is P2P device
When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device. Fix this by
remove multicast/broadcast flags and add p2p and noarp flags.

After removing the none ethernet interface and adding an ethernet interface
to team, we need to reset team interface flags. Unlike bonding interface,
team do not need restore IFF_MASTER, IFF_SLAVE flags.

Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 1d76efe157 ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 09:16:17 +02:00
Hangbin Liu
da19a2b967 bonding: reset bond's flags when down link is P2P device
When adding a point to point downlink to the bond, we neglected to reset
the bond's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to the bonding.

To address this issue, let's reset the bond's flags for P2P interfaces.

Before fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188::
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/gre6 2006:70:10::1 brd 2006:70:10::2
    inet6 fe80::200:ff:fe00:0/64 scope link
       valid_lft forever preferred_lft forever

After fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9::
8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2
    inet6 fe80::1/64 scope link
       valid_lft forever preferred_lft forever

Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 872254dd6b ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 09:16:17 +02:00
Steve French
1982655821 smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
The NTLMSSP_NEGOTIATE_VERSION flag only needs to be sent during
the NTLMSSP NEGOTIATE (not the AUTH) request, so filter it out for
NTLMSSP AUTH requests. See MS-NLMP 2.2.1.3

This fixes a problem found by the gssntlmssp server.

Link: https://github.com/gssapi/gss-ntlmssp/issues/95
Fixes: 52d005337b ("smb3: send NTLMSSP version information")
Acked-by: Roy Shterman <roy.shterman@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-25 01:16:05 -05:00
Winston Wen
a43f95fdd3 cifs: fix charset issue in reconnection
We need to specify charset, like "iocharset=utf-8", in mount options for
Chinese path if the nls_default don't support it, such as iso8859-1, the
default value for CONFIG_NLS_DEFAULT.

But now in reconnection the nls_default is used, instead of the one we
specified and used in mount, and this can lead to mount failure.

Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-25 00:31:24 -05:00
Winston Wen
c1ed39ec11 fs/nls: make load_nls() take a const parameter
load_nls() take a char * parameter, use it to find nls module in list or
construct the module name to load it.

This change make load_nls() take a const parameter, so we don't need do
some cast like this:

        ses->local_nls = load_nls((char *)ctx->local_nls->charset);

Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-25 00:30:02 -05:00
Ritesh Harjani (IBM)
4ce02c6797 iomap: Add per-block dirty state tracking to improve performance
When filesystem blocksize is less than folio size (either with
mapping_large_folio_support() or with blocksize < pagesize) and when the
folio is uptodate in pagecache, then even a byte write can cause
an entire folio to be written to disk during writeback. This happens
because we currently don't have a mechanism to track per-block dirty
state within struct iomap_folio_state. We currently only track uptodate
state.

This patch implements support for tracking per-block dirty state in
iomap_folio_state->state bitmap. This should help improve the filesystem
write performance and help reduce write amplification.

Performance testing of below fio workload reveals ~16x performance
improvement using nvme with XFS (4k blocksize) on Power (64K pagesize)
FIO reported write bw scores improved from around ~28 MBps to ~452 MBps.

1. <test_randwrite.fio>
[global]
	ioengine=psync
	rw=randwrite
	overwrite=1
	pre_read=1
	direct=0
	bs=4k
	size=1G
	dir=./
	numjobs=8
	fdatasync=1
	runtime=60
	iodepth=64
	group_reporting=1

[fio-run]

2. Also our internal performance team reported that this patch improves
   their database workload performance by around ~83% (with XFS on Power)

Reported-by: Aravinda Herle <araherle@in.ibm.com>
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-25 10:55:56 +05:30
Ritesh Harjani (IBM)
a01b8f2252 iomap: Allocate ifs in ->write_begin() early
We dont need to allocate an ifs in ->write_begin() for writes where the
position and length completely overlap with the given folio.
Therefore, such cases are skipped.

Currently when the folio is uptodate, we only allocate ifs at writeback
time (in iomap_writepage_map()). This is ok until now, but when we are
going to add support for per-block dirty state bitmap in ifs, this
could cause some performance degradation. The reason is that if we don't
allocate ifs during ->write_begin(), then we will never mark the
necessary dirty bits in ->write_end() call. And we will have to mark all
the bits as dirty at the writeback time, that could cause the same write
amplification and performance problems as it is now.

Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-07-25 10:55:56 +05:30
Ritesh Harjani (IBM)
7f79d85b52 iomap: Refactor iomap_write_delalloc_punch() function out
This patch factors iomap_write_delalloc_punch() function out. This function
is resposible for actual punch out operation.
The reason for doing this is, to avoid deep indentation when we bring
punch-out of individual non-dirty blocks within a dirty folio in a later
patch (which adds per-block dirty status handling to iomap) to avoid
delalloc block leak.

Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-07-25 10:55:56 +05:30
Ritesh Harjani (IBM)
0af2b37d8e iomap: Use iomap_punch_t typedef
It makes it much easier if we have iomap_punch_t typedef for "punch"
function pointer in all delalloc related punch, scan and release
functions. It will be useful in later patches when we will factor out
iomap_write_delalloc_punch() function.

Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-25 10:55:55 +05:30
Ritesh Harjani (IBM)
eee2d2e6ea iomap: Fix possible overflow condition in iomap_write_delalloc_scan
folio_next_index() returns an unsigned long value which left shifted
by PAGE_SHIFT could possibly cause an overflow on 32-bit system. Instead
use folio_pos(folio) + folio_size(folio), which does this correctly.

Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-25 10:55:55 +05:30
Ritesh Harjani (IBM)
cc86181a3b iomap: Add some uptodate state handling helpers for ifs state bitmap
This patch adds two of the helper routines ifs_is_fully_uptodate()
and ifs_block_is_uptodate() for managing uptodate state of "ifs" state
bitmap.

In later patches ifs state bitmap array will also handle dirty state of all
blocks of a folio. Hence this patch adds some helper routines for handling
uptodate state of the ifs state bitmap.

Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-25 10:55:55 +05:30
Ritesh Harjani (IBM)
3ea5c76cad iomap: Drop ifs argument from iomap_set_range_uptodate()
iomap_folio_state (ifs) can be derived directly from the folio, making it
unnecessary to pass "ifs" as an argument to iomap_set_range_uptodate().
This patch eliminates "ifs" argument from iomap_set_range_uptodate()
function.

Also, the definition of iomap_set_range_uptodate() and
ifs_set_range_uptodate() functions are moved above ifs_alloc().
In upcoming patches, we plan to introduce additional helper routines for
handling dirty state, with the intention of consolidating all of "ifs"
state handling routines at one place.

Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-25 10:55:54 +05:30
Ritesh Harjani (IBM)
04f52c4e6f iomap: Rename iomap_page to iomap_folio_state and others
struct iomap_page actually tracks per-block state of a folio.
Hence it make sense to rename some of these function names and data
structures for e.g.
1. struct iomap_page (iop) -> struct iomap_folio_state (ifs)
2. iomap_page_create() -> ifs_alloc()
3. iomap_page_release() -> ifs_free()
4. iomap_iop_set_range_uptodate() -> ifs_set_range_uptodate()
5. to_iomap_page() -> folio->private

Since in later patches we are also going to add per-block dirty state
tracking to iomap_folio_state. Hence this patch also renames "uptodate"
& "uptodate_lock" members of iomap_folio_state to "state" and"state_lock".

We don't really need to_iomap_page() function, instead directly open code
it as folio->private;

Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-25 10:55:54 +05:30
Manivannan Sadhasivam
c2add32ce4 dt-bindings: opp: Increase maxItems for opp-hz property
Current limit of 16 will be exhausted by platforms specifying the frequency
for 9 clocks using opp-hz, like Qcom SDM845 SoC. For instance, specifying
the frequency for 9 clocks with 64bit specifier as below would consume
(9 * 2 = 18) items.

	opp-50000000 {
		opp-hz = /bits/ 64 <50000000>,
			 /bits/ 64 <0>,
			 /bits/ 64 <0>,
			 /bits/ 64 <37500000>,
			 /bits/ 64 <0>,
			 /bits/ 64 <0>,
			 /bits/ 64 <0>,
			 /bits/ 64 <0>,
			 /bits/ 64 <75000000>;
	};

So let's increase the limit to 32 which should be enough for most platforms
(hopefully).

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-07-25 09:40:57 +05:30
Brian Norris
0979e7e3cf MAINTAINERS: Add drivers/firmware/google/ entry
These are mostly used for Chrome platforms, so group it in with the same
mailing list, repo, and (one) committer.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-By: Benson Leung <bleung@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230724081247.678784-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
2023-07-25 10:52:37 +08:00
Bart Van Assche
65a558f66c block: Improve performance for BLK_MQ_F_BLOCKING drivers
blk_mq_run_queue() runs the queue asynchronously if BLK_MQ_F_BLOCKING
has been set. This is suboptimal since running the queue asynchronously
is slower than running the queue synchronously. This patch modifies
blk_mq_run_queue() as follows if BLK_MQ_F_BLOCKING has been set:
- Run the queue synchronously if it is allowed to sleep.
- Run the queue asynchronously if it is not allowed to sleep.
Additionally, blk_mq_run_hw_queue(hctx, false) calls are modified into
blk_mq_run_hw_queue(hctx, hctx->flags & BLK_MQ_F_BLOCKING) if the caller
may be invoked from atomic context.

The following caller chains have been reviewed:

blk_mq_run_hw_queue(hctx, false)
  blk_mq_get_tag()      /* may sleep, hence the functions it calls may also sleep */
  blk_execute_rq()             /* may sleep */
  blk_mq_run_hw_queues(q, async=false)
    blk_freeze_queue_start()   /* may sleep */
    blk_mq_requeue_work()      /* may sleep */
    scsi_kick_queue()
      scsi_requeue_run_queue() /* may sleep */
      scsi_run_host_queues()
        scsi_ioctl_reset()     /* may sleep */
  blk_mq_insert_requests(hctx, ctx, list, run_queue_async=false)
    blk_mq_dispatch_plug_list(plug, from_sched=false)
      blk_mq_flush_plug_list(plug, from_schedule=false)
        __blk_flush_plug(plug, from_schedule=false)
	blk_add_rq_to_plug()
	  blk_mq_submit_bio()  /* may sleep if REQ_NOWAIT has not been set */
  blk_mq_plug_issue_direct()
    blk_mq_flush_plug_list()   /* see above */
  blk_mq_dispatch_plug_list(plug, from_sched=false)
    blk_mq_flush_plug_list()   /* see above */
  blk_mq_try_issue_directly()
    blk_mq_submit_bio()        /* may sleep if REQ_NOWAIT has not been set */
  blk_mq_try_issue_list_directly(hctx, list)
    blk_mq_insert_requests() /* see above */

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230721172731.955724-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 20:13:12 -06:00
Bart Van Assche
d42e2e3448 scsi: Remove a blk_mq_run_hw_queues() call
blk_mq_kick_requeue_list() calls blk_mq_run_hw_queues() asynchronously.
Leave out the direct blk_mq_run_hw_queues() call. This patch causes
scsi_run_queue() to call blk_mq_run_hw_queues() asynchronously instead
of synchronously. Since scsi_run_queue() is not called from the hot I/O
submission path, this patch does not affect the hot path.

This patch prepares for allowing blk_mq_run_hw_queue() to sleep if
BLK_MQ_F_BLOCKING has been set. scsi_run_queue() may be called from
atomic context and must not sleep. Hence the removal of the
blk_mq_run_hw_queues(q, false) call. See also scsi_unblock_requests().

Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230721172731.955724-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 20:13:12 -06:00
Bart Van Assche
b5ca9acff5 scsi: Inline scsi_kick_queue()
Inline scsi_kick_queue() to prepare for modifying the second argument
passed to blk_mq_run_hw_queues().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230721172731.955724-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 20:13:12 -06:00
Bart Van Assche
e0933b526f block: Fix a source code comment in include/uapi/linux/blkzoned.h
Fix the symbolic names for zone conditions in the blkzoned.h header
file.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Fixes: 6a0cb1bc10 ("block: Implement support for zoned block devices")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230706201422.3987341-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 20:11:54 -06:00
Christoph Hellwig
ae42f0b3bf block: don't pass a bio to bio_try_merge_hw_seg
There is no good reason to pass the bio to bio_try_merge_hw_seg.  Just
pass the current bvec and rename the function to bvec_try_merge_hw_page.
This will allow reusing this function for supporting multi-page integrity
payload bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 19:55:16 -06:00
Christoph Hellwig
858c708d9e block: move the bi_size update out of __bio_try_merge_page
The update of bi_size is the only thing in __bio_try_merge_page that
needs a bio.  Move it to the callers, and merge __bio_try_merge_page
and page_is_mergeable into a single bvec_try_merge_page that only takes
the current bvec instead of a full bio.  This will allow reusing this
function for supporting multi-page integrity payload bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 19:55:16 -06:00
Christoph Hellwig
80232b5203 block: downgrade a bio_full call in bio_add_page
bio_add_page already checks that there is space in bi_size a little
earlier.  So after we failed to add to an existing segment, just check
that there is another one available instead of duplicating the bi_size
check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 19:55:16 -06:00
Christoph Hellwig
613699050a block: move the bi_size overflow check in __bio_try_merge_page
Checking for availability in bi_size in a function that attempts to
merge into an existing segment is a bit odd, as the limit also applies
when adding a new segment.  This code works fine as we always call
__bio_try_merge_page, but contributes to sub-optimal calling conventions
and doesn't lead to clear code.

Move it to two of the callers instead, the third one already has a more
strict check that includes max_hw_segments anyway.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 19:55:16 -06:00
Christoph Hellwig
0eca8b6f97 block: move the bi_vcnt check out of __bio_try_merge_page
Move the bi_vcnt out of __bio_try_merge_page and into the two callers
that don't already have it in preparation for additional changes to
__bio_try_merge_page.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 19:55:16 -06:00
Christoph Hellwig
939e1a3703 block: move the BIO_CLONED checks out of __bio_try_merge_page
__bio_try_merge_page is a way too low-level helper to assert that the
bio is not cloned.  Move the check into bio_add_page and
bio_iov_iter_get_pages instead, which are the high level entry points
that should enforce this variant.  bio_add_hw_page already this
check, coverig the third (indirect) caller of __bio_try_merge_page.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 19:55:16 -06:00
Christoph Hellwig
6850b2dd5c block: use SECTOR_SHIFT bio_add_hw_page
Use the SECTOR_SHIFT magic constant instead of the magic number.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 19:55:16 -06:00
Christoph Hellwig
cd1d83e24e block: tidy up the bio full checks in bio_add_hw_page
bio_add_hw_page already checks if the number of bytes trying to be added
even fit into max_hw_sectors limit of the queue.   Remove the call to
bio_full and just do a check for the smaller of the number of segments
in the bio and the queue max segments limit, and do this cheap check
before the more expensive gap to previous check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 19:55:16 -06:00
Jakub Kicinski
f0291103d2 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-07-21 (i40e, iavf)

This series contains updates to i40e and iavf drivers.

Wang Ming corrects an error check on i40e.

Jake unlocks crit_lock on allocation failure to prevent deadlock and
stops re-enabling of interrupts when it's not intended for iavf.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED
  iavf: fix potential deadlock on allocation failure
  i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()
====================

Link: https://lore.kernel.org/r/20230721155812.1292752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 17:12:06 -07:00
Jakub Kicinski
ac2a7b1317 linux-can-fixes-for-6.5-20230724
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmS+jLwTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRC+UBxKKooE6LMiB/wPcSaPk8b/Tkpwnf0R0yP36tP7YS0V
 7SZldc2KRYeQb0Lk1gPTzWRGmddKl2kORh3Y3JkfanKNsiNfhYgUrxeLDkbeDolo
 n1Io6fjhK1DzM5cx6Sn+spPpl4QGWV3YQ8PAJm6FjsH5+M5LPzZIK0GGakESCxU7
 YDbq3wqglKeI2h1Ae3sQeBd7k26KQXupHfoCyYgUlmOF/u2PuKP0xmn2674QdlvR
 m99iE5kqF/HKlrg1OlcOTa7KzknOYPjsVpJ1nTcqxKmUDEYq+niLflBV9Gw8VEyO
 Y1naqUJz3TavDVgVIGkjUJEd/+sw3yI2LK7g3+DhugXvMLrqIPa6kmrM
 =ayq3
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2023-07-24

The first patch is by me and adds a missing set of CAN state to
CAN_STATE_STOPPED on close in the gs_usb driver.

The last patch is by Eric Dumazet and fixes a lockdep issue in the CAN
raw protocol.

* tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: raw: fix lockdep issue in raw_release()
  can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED
====================

Link: https://lore.kernel.org/r/20230724150141.766047-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 17:10:10 -07:00
Jedrzej Jagielski
a333605650 ice: Fix memory management in ice_ethtool_fdir.c
Fix ethtool FDIR logic to not use memory after its release.
In the ice_ethtool_fdir.c file there are 2 spots where code can
refer to pointers which may be missing.

In the ice_cfg_fdir_xtrct_seq() function seg may be freed but
even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)).

In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input
may first fail to be added via ice_fdir_update_list_entry() but then
may be deleted by ice_fdir_update_list_entry.

Terminate in both cases when the returned value of the previous
operation is other than 0, free memory and don't use it anymore.

Reported-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423
Fixes: cac2a27cd9 ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 17:07:51 -07:00
Stewart Smith
d11b0df7dd tcp: Reduce chance of collisions in inet6_hashfn().
For both IPv4 and IPv6 incoming TCP connections are tracked in a hash
table with a hash over the source & destination addresses and ports.
However, the IPv6 hash is insufficient and can lead to a high rate of
collisions.

The IPv6 hash used an XOR to fit everything into the 96 bits for the
fast jenkins hash, meaning it is possible for an external entity to
ensure the hash collides, thus falling back to a linear search in the
bucket, which is slow.

We take the approach of hash the full length of IPv6 address in
__ipv6_addr_jhash() so that all users can benefit from a more secure
version.

While this may look like it adds overhead, the reality of modern CPUs
means that this is unmeasurable in real world scenarios.

In simulating with llvm-mca, the increase in cycles for the hashing
code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9
on Nehalem (base of ~173).

In commit dd6d2910c5 ("netfilter: conntrack: switch to siphash")
netfilter switched from a jenkins hash to a siphash, but even the faster
hsiphash is a more significant overhead (~20-30%) in some preliminary
testing.  So, in this patch, we keep to the more conservative approach to
ensure we don't add much overhead per SYN.

In testing, this results in a consistently even spread across the
connection buckets.  In both testing and real-world scenarios, we have
not found any measurable performance impact.

Fixes: 08dcdbf6a7 ("ipv6: use a stronger hash for tcp")
Signed-off-by: Stewart Smith <trawets@amazon.com>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 16:52:37 -07:00
Wei Fang
bb7a015636 net: fec: avoid tx queue timeout when XDP is enabled
According to the implementation of XDP of FEC driver, the XDP path
shares the transmit queues with the kernel network stack, so it is
possible to lead to a tx timeout event when XDP uses the tx queue
pretty much exclusively. And this event will cause the reset of the
FEC hardware.
To avoid timeout in this case, we use the txq_trans_cond_update()
interface to update txq->trans_start to jiffies so that watchdog
won't generate a transmit timeout warning.

Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230721083559.2857312-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 16:45:29 -07:00
Paolo Abeni
b8dc6d6ce9 mptcp: fix rcv buffer auto-tuning
The MPTCP code uses the assumption that the tcp_win_from_space() helper
does not use any TCP-specific field, and thus works correctly operating
on an MPTCP socket.

The commit dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
broke such assumption, and as a consequence most MPTCP connections stall
on zero-window event due to auto-tuning changing the rcv buffer size
quite randomly.

Address the issue syncing again the MPTCP auto-tuning code with the TCP
one. To achieve that, factor out the windows size logic in socket
independent helpers, and reuse them in mptcp_rcv_space_adjust(). The
MPTCP level scaling_ratio is selected as the minimum one from the all
the subflows, as a worst-case estimate.

Fixes: dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20230720-upstream-net-next-20230720-mptcp-fix-rcv-buffer-auto-tuning-v1-1-175ef12b8380@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 16:36:05 -07:00
Darrick J. Wong
d42bd17c6a Create large folios in iomap buffered write path
Commit ebb7fb1557 limited the length of ioend chains to 4096 entries
 to improve worst-case latency.  Unfortunately, this had the effect of
 limiting the performance of:
 
 fio -name write-bandwidth -rw=write -bs=1024Ki -size=32Gi -runtime=30 \
         -iodepth 1 -ioengine sync -zero_buffers=1 -direct=0 -end_fsync=1 \
         -numjobs=4 -directory=/mnt/test
 
 https://lore.kernel.org/linux-xfs/20230508172406.1CF3.409509F4@e16-tech.com/
 
 The problem ends up being lock contention on the i_pages spinlock as we
 clear the writeback bit on each folio (and propagate that up through
 the tree).  By using larger folios, we decrease the number of folios
 to be processed by a factor of 256 for this benchmark, eliminating the
 lock contention.
 
 Creating large folios in the buffered write path is also the right
 thing to do.  It's a project that has been on the back burner for years,
 it just hasn't been important enough to do before now.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmS+/8YACgkQDpNsjXcp
 gj6jwgf/YpI9mbo63D55QRpMVhvej10aGxZj497IJW5bEqh5cRX0x+kUZkMOW36a
 iBB4iiTT+Gl6Z7eJ89W4J7Es48k8hHaprh1WGjlI0zHmBhXvNGHKSk7Egno1BS2v
 23YEzBGOdA6dlhDLA9PNIiV5berwTxyNbdv/PadKxDcWy65UvwZ8FCQfli9E0CP6
 aeG8PU8RybagYUQYQuCU7TgcCJNpthJHmYBy+iJEZy/9JI0klYvHUaLo6hl1wgXw
 Cthc63C4lYtCY/koHFaD8W24RYAZQF+BMTE6oL6X+tA70fRL7ozCGtu4Mjk55kmJ
 yNkVqw2ImTuwLRxfxPyEp23Iwz9alA==
 =WE72
 -----END PGP SIGNATURE-----

Merge tag 'large-folio-writes' of git://git.infradead.org/users/willy/pagecache into iomap-6.6-merge

Create large folios in iomap buffered write path

Commit ebb7fb1557 limited the length of ioend chains to 4096 entries
to improve worst-case latency.  Unfortunately, this had the effect of
limiting the performance of:

fio -name write-bandwidth -rw=write -bs=1024Ki -size=32Gi -runtime=30 \
        -iodepth 1 -ioengine sync -zero_buffers=1 -direct=0 -end_fsync=1 \
        -numjobs=4 -directory=/mnt/test

https://lore.kernel.org/linux-xfs/20230508172406.1CF3.409509F4@e16-tech.com/

The problem ends up being lock contention on the i_pages spinlock as we
clear the writeback bit on each folio (and propagate that up through
the tree).  By using larger folios, we decrease the number of folios
to be processed by a factor of 256 for this benchmark, eliminating the
lock contention.

Creating large folios in the buffered write path is also the right
thing to do.  It's a project that has been on the back burner for years,
it just hasn't been important enough to do before now.

* tag 'large-folio-writes' of git://git.infradead.org/users/willy/pagecache:
  iomap: Copy larger chunks from userspace
  iomap: Create large folios in the buffered write path
  filemap: Allow __filemap_get_folio to allocate large folios
  filemap: Add fgf_t typedef
  iomap: Remove unnecessary test from iomap_release_folio()
  doc: Correct the description of ->release_folio
  iomap: Remove large folio handling in iomap_invalidate_folio()
  iov_iter: Add copy_folio_from_iter_atomic()
  iov_iter: Handle compound highmem pages in copy_page_from_iter_atomic()
  iov_iter: Map the page later in copy_page_from_iter_atomic()

[djwong: yay amortizations!]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2023-07-24 16:12:29 -07:00
Breno Leitao
004a04b97b netconsole: Use kstrtobool() instead of kstrtoint()
Replace kstrtoint() by kstrtobool() in the sysfs _store() functions.
This improves the user usability and simplify the code.

With this fix, it is now possible to use [YyNn] to set and unset a
feature. Old behaviour is still unchanged.

kstrtobool() is also safer and doesn't need the extra validation that
is required when converting a string to bool (end field in the struct),
which makes the code simpler.

Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721092146.4036622-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 16:06:20 -07:00
Breno Leitao
9f64b6e459 netconsole: Use sysfs_emit() instead of snprintf()
According to the sysfs.rst documentation, _show() functions should only
use sysfs_emit() instead of snprintf().

Since snprintf() shouldn't be used in the sysfs _show() path, replace it
by sysfs_emit().

Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721092146.4036622-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 16:06:20 -07:00
Maciej Fijalkowski
a097627dca net: add missing net_device::xdp_zc_max_segs description
Cited commit under 'Fixes' tag introduced new member to struct
net_device without providing description of it - fix it.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20230720141613.61488b9e@canb.auug.org.au/
Fixes: 13ce2daa25 ("xsk: add new netlink attribute dedicated for ZC max frags")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Simon Horman <simon.horman@corigine.com> # build-tested
Link: https://lore.kernel.org/r/20230721145808.596298-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 15:54:50 -07:00
Maciej Żenczykowski
69172f0bcb ipv6 addrconf: fix bug where deleting a mngtmpaddr can create a new temporary address
currently on 6.4 net/main:

  # ip link add dummy1 type dummy
  # echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr
  # ip link set dummy1 up
  # ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1
  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic
         valid_lft 604800sec preferred_lft 86172sec
      inet6 2000::1/64 scope global mngtmpaddr
         valid_lft forever preferred_lft forever
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

  # ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1

  (can wait a few seconds if you want to, the above delete isn't [directly] the problem)

  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::1/64 scope global mngtmpaddr
         valid_lft forever preferred_lft forever
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

  # ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1
  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic
         valid_lft 604797sec preferred_lft 86169sec
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

This patch prevents this new 'global temporary dynamic' address from being
created by the deletion of the related (same subnet prefix) 'mngtmpaddr'
(which is triggered by there already being no temporary addresses).

Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: 53bd674915 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses")
Reported-by: Xiao Ma <xiaom@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 15:51:21 -07:00
Yuanjun Gong
69a184f7a3 ethernet: atheros: fix return value check in atl1e_tso_csum()
in atl1e_tso_csum, it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().

Fixes: a6a5325239 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230720144219.39285-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 15:43:02 -07:00
Yuanjun Gong
ed96824b71 atheros: fix return value check in atl1_tso()
in atl1_tso(), it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().

Fixes: 401c0aabec ("atl1: simplify tx packet descriptor")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230722142511.12448-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 15:37:56 -07:00