Commit graph

1,215,304 commits

Author SHA1 Message Date
Matthew Wilcox (Oracle)
5d8edfb900 iomap: Copy larger chunks from userspace
If we have a large folio, we can copy in larger chunks than PAGE_SIZE.
Start at the maximum page cache size and shrink by half every time we
hit the "we are short on memory" problem.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-24 18:04:30 -04:00
Matthew Wilcox (Oracle)
d6bb59a944 iomap: Create large folios in the buffered write path
Use the size of the write as a hint for the size of the folio to create.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-24 18:04:30 -04:00
Matthew Wilcox (Oracle)
4f66170119 filemap: Allow __filemap_get_folio to allocate large folios
Allow callers of __filemap_get_folio() to specify a preferred folio
order in the FGP flags.  This is only honoured in the FGP_CREATE path;
if there is already a folio in the page cache that covers the index,
we will return it, no matter what its order is.  No create-around is
attempted; we will only create folios which start at the specified index.
Unmodified callers will continue to allocate order 0 folios.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-24 18:04:30 -04:00
Matthew Wilcox (Oracle)
ffc143db63 filemap: Add fgf_t typedef
Similarly to gfp_t, define fgf_t as its own type to prevent various
misuses and confusion.  Leave the flags as FGP_* for now to reduce the
size of this patch; they will be converted to FGF_* later.  Move the
documentation to the definition of the type insted of burying it in the
__filemap_get_folio() documentation.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-07-24 18:04:30 -04:00
Matthew Wilcox (Oracle)
7a8eb01b07 iomap: Remove unnecessary test from iomap_release_folio()
The check for the folio being under writeback is unnecessary; the caller
has checked this and the folio is locked, so the folio cannot be under
writeback at this point.

The comment is somewhat misleading in that it talks about one specific
situation in which we can see a dirty folio.  There are others, so change
the comment to explain why we can't release the iomap_page.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-24 18:04:30 -04:00
Matthew Wilcox (Oracle)
32b29cc9db doc: Correct the description of ->release_folio
The filesystem ->release_folio method is called under more circumstances
now than when the documentation was written.  The second sentence
describing the interpretation of the return value is the wrong polarity
(false indicates failure, not success).  And the third sentence is also
wrong (the kernel calls try_to_free_buffers() instead).

So replace the entire paragraph with a detailed description of what the
state of the folio may be, the meaning of the gfp parameter, why the
method is being called and what the filesystem is expected to do.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-24 18:04:30 -04:00
Matthew Wilcox (Oracle)
a221ab717c iomap: Remove large folio handling in iomap_invalidate_folio()
We do not need to release the iomap_page in iomap_invalidate_folio()
to allow the folio to be split.  The splitting code will call
->release_folio() if there is still per-fs private data attached to
the folio.  At that point, we will check if the folio is still dirty
and decline to release the iomap_page.  It is possible to trigger the
warning in perfectly legitimate circumstances (eg if a disk read fails,
we do a partial write to the folio, then we truncate the folio), which
will cause those writes to be lost.

Fixes: 60d8231089 ("iomap: Support large folios in invalidatepage")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-07-24 18:04:29 -04:00
Matthew Wilcox (Oracle)
1b0306981e iov_iter: Add copy_folio_from_iter_atomic()
Add a folio wrapper around copy_page_from_iter_atomic().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-24 18:03:58 -04:00
Matthew Wilcox (Oracle)
908a1ad894 iov_iter: Handle compound highmem pages in copy_page_from_iter_atomic()
copy_page_from_iter_atomic() already handles !highmem compound
pages correctly, but if we are passed a highmem compound page,
each base page needs to be mapped & unmapped individually.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-07-24 18:03:43 -04:00
Matthew Wilcox (Oracle)
f7f9a0c873 iov_iter: Map the page later in copy_page_from_iter_atomic()
Remove a couple of calls to kunmap_atomic() in the rare error cases.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-07-24 18:03:43 -04:00
Paul E. McKenney
84dd7f19e7 checkpatch: Complain about unexpected uses of RCU Tasks Trace
RCU Tasks Trace is quite specialized, having been created specifically
for sleepable BPF programs.  Because it allows general blocking within
readers, any new use of RCU Tasks Trace must take current use cases into
account.  Therefore, update checkpatch.pl to complain about use of any of
the RCU Tasks Trace API members outside of BPF and outside of RCU itself.

[ paulmck: Apply Joe Perches feedback. ]

Cc: Andy Whitcroft <apw@canonical.com> (maintainer:CHECKPATCH)
Cc: Joe Perches <joe@perches.com> (maintainer:CHECKPATCH)
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> (reviewer:CHECKPATCH)
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-07-24 14:52:16 -07:00
Linus Torvalds
0b5547c518 SCSI fixes on 20230724
Single fix for a potential regression over a misunderstanding of the
 blk_get_queue() api.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZL7MmSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishS5CAP9nqusg
 7fN/2nO7MdZNeZwHvNVmgBOVO7z4vPypCTN8oAEAvMQUcXjQFUuIm4qJalF0UPKv
 GxQjWcd2Pm7rYI6i/9Y=
 =/KLr
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
 "A single fix for a potential regression over a misunderstanding of the
  blk_get_queue() api"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sg: Fix checking return value of blk_get_queue()
2023-07-24 14:38:41 -07:00
Ian Rogers
c126ac4a20 perf build: Add LTO build option
Add an LTO build option, that sets the appropriate CFLAGS and CXXFLAGS
values.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230724201247.748146-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-24 18:24:25 -03:00
Ian Rogers
5cfb0cc0d9 perf test: Avoid weak symbol for arch_tests
GCC LTO will complain that the array length varies for the arch_tests
weak symbol. Use extern/static and architecture determining #if to
workaround this problem.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230724201247.748146-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-24 18:24:09 -03:00
Ian Rogers
0f97a3a0de perf parse-events: Avoid use uninitialized warning
With GCC LTO a potential use uninitialized is spotted:
```
In function ‘parse_events_config_bpf’,
    inlined from ‘parse_events_load_bpf’ at util/parse-events.c:874:8:
util/parse-events.c:792:37: error: ‘error_pos’ may be used uninitialized [-Werror=maybe-uninitialized]
  792 |                                 idx = term->err_term + error_pos;
      |                                     ^
util/parse-events.c: In function ‘parse_events_load_bpf’:
util/parse-events.c:765:13: note: ‘error_pos’ was declared here
  765 |         int error_pos;
      |             ^
```
So initialize at declaration.

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230724201247.748146-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-24 18:23:52 -03:00
Ian Rogers
91f88a0ac8 perf stat: Avoid uninitialized use of perf_stat_config
perf_event__read_stat_config will assign values based on number of
tags and tag values. Initialize the structs to zero before they are
assigned so that no uninitialized values can be seen.

This potential error was reported by GCC with LTO enabled.

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230724201247.748146-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-24 18:23:18 -03:00
Athira Rajeev
341e0e9f59 perf callchain powerpc: Fix addr location init during arch_skip_callchain_idx function
'perf record;  with callchain recording fails as below
in powerpc:

    ./perf record -a -gR sleep 10
    ./perf report
    perf: Segmentation fault

gdb trace points to thread__find_map

    0  0x00000000101df314 in atomic_cmpxchg (newval=1818846826, oldval=1818846827, v=0x1001a8f3) at /home/athira/linux/tools/include/asm-generic/atomic-gcc.h:70
    1  refcount_sub_and_test (i=1, r=0x1001a8f3) at /home/athira/linux/tools/include/linux/refcount.h:135
    2  refcount_dec_and_test (r=0x1001a8f3) at /home/athira/linux/tools/include/linux/refcount.h:148
    3  map__put (map=0x1001a8b3) at util/map.c:311
    4  0x000000001016842c in __map__zput (map=0x7fffffffa368) at util/map.h:190
    5  thread__find_map (thread=0x105b92f0, cpumode=<optimized out>, addr=13835058055283572736, al=al@entry=0x7fffffffa358) at util/event.c:582
    6  0x000000001016882c in thread__find_symbol (thread=<optimized out>, cpumode=<optimized out>, addr=<optimized out>, al=0x7fffffffa358) at util/event.c:656
    7  0x00000000102e12b4 in arch_skip_callchain_idx (thread=<optimized out>, chain=<optimized out>) at arch/powerpc/util/skip-callchain-idx.c:255
    8  0x00000000101d3bf4 in thread__resolve_callchain_sample (thread=0x105b92f0, cursor=0x1053d160, evsel=<optimized out>, sample=0x7fffffffa908, parent=0x7fffffffa778, root_al=0x7fffffffa710,
        max_stack=<optimized out>) at util/machine.c:2940
    9  0x00000000101cd210 in sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=<optimized out>, evsel=<optimized out>, al=<optimized out>, max_stack=<optimized out>)
        at util/callchain.c:1112
    10 0x000000001022a9d8 in hist_entry_iter__add (iter=0x7fffffffa750, al=0x7fffffffa710, max_stack_depth=<optimized out>, arg=0x7fffffffbbd0) at util/hist.c:1232
    11 0x0000000010056d98 in process_sample_event (tool=0x7fffffffbbd0, event=0x7ffff6223c38, sample=0x7fffffffa908, evsel=<optimized out>, machine=0x10524ef8) at builtin-report.c:332

Here arch_skip_callchain_idx calls thread__find_symbol and which
invokes thread__find_map with uninitialised "addr_location".
Snippet:

thread__find_symbol(thread, PERF_RECORD_MISC_USER, ip, &al);

Recent change with commit 0dd5041c9a ("perf addr_location: Add
init/exit/copy functions") , introduced "maps__zput" in the function
thread__find_map. This could result in segfault while accessing
uninitialised map from "struct addr_location". Fix this by adding
addr_location__init and addr_location__exit in arch_skip_callchain_idx.

Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230724165815.17810-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-24 17:46:11 -03:00
Arnd Bergmann
b30cb96623
drm/panel: ld9040: add backlight Kconfig dependency
The driver now uses the backlight interface, which breaks when that
is disabled:

ld.lld: error: undefined symbol: devm_backlight_device_register

Enforce the necessary Kconfig dependency to avoid this.

Fixes: c2268daa65 ("drm/panel: ld9040: Register a backlight device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724121736.1293270-1-arnd@kernel.org
2023-07-24 22:00:39 +02:00
Rong Tao
910e230d5f samples/hw_breakpoint: Fix kernel BUG 'invalid opcode: 0000'
Macro symbol_put() is defined as __symbol_put(__stringify(x))

    ksym_name = "jiffies"
    symbol_put(ksym_name)

will be resolved as

    __symbol_put("ksym_name")

which is clearly wrong. So symbol_put must be replaced with __symbol_put.

When we uninstall hw_breakpoint.ko (rmmod), a kernel bug occurs with the
following error:

[11381.854152] kernel BUG at kernel/module/main.c:779!
[11381.854159] invalid opcode: 0000 [#2] PREEMPT SMP PTI
[11381.854163] CPU: 8 PID: 59623 Comm: rmmod Tainted: G      D    OE      6.2.9-200.fc37.x86_64 #1
[11381.854167] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B360M-HDV, BIOS P3.20 10/23/2018
[11381.854169] RIP: 0010:__symbol_put+0xa2/0xb0
[11381.854175] Code: 00 e8 92 d2 f7 ff 65 8b 05 c3 2f e6 78 85 c0 74 1b 48 8b 44 24 30 65 48 2b 04 25 28 00 00 00 75 12 48 83 c4 38 c3 cc cc cc cc <0f> 0b 0f 1f 44 00 00 eb de e8 c0 df d8 00 90 90 90 90 90 90 90 90
[11381.854178] RSP: 0018:ffffad8ec6ae7dd0 EFLAGS: 00010246
[11381.854181] RAX: 0000000000000000 RBX: ffffffffc1fd1240 RCX: 000000000000000c
[11381.854184] RDX: 000000000000006b RSI: ffffffffc02bf7c7 RDI: ffffffffc1fd001c
[11381.854186] RBP: 000055a38b76e7c8 R08: ffffffff871ccfe0 R09: 0000000000000000
[11381.854188] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[11381.854190] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[11381.854192] FS:  00007fbf7c62c740(0000) GS:ffff8c5badc00000(0000) knlGS:0000000000000000
[11381.854195] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[11381.854197] CR2: 000055a38b7793f8 CR3: 0000000363e1e001 CR4: 00000000003726e0
[11381.854200] DR0: ffffffffb3407980 DR1: 0000000000000000 DR2: 0000000000000000
[11381.854202] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[11381.854204] Call Trace:
[11381.854207]  <TASK>
[11381.854212]  s_module_exit+0xc/0xff0 [symbol_getput]
[11381.854219]  __do_sys_delete_module.constprop.0+0x198/0x2f0
[11381.854225]  do_syscall_64+0x58/0x80
[11381.854231]  ? exit_to_user_mode_prepare+0x180/0x1f0
[11381.854237]  ? syscall_exit_to_user_mode+0x17/0x40
[11381.854241]  ? do_syscall_64+0x67/0x80
[11381.854245]  ? syscall_exit_to_user_mode+0x17/0x40
[11381.854248]  ? do_syscall_64+0x67/0x80
[11381.854252]  ? exc_page_fault+0x70/0x170
[11381.854256]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Signed-off-by: Rong Tao <rongtao@cestc.cn>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-07-24 12:15:29 -07:00
Sebastian Reichel
0acf4fa7f1 arm64: dts: rockchip: add PCIe3 support for rk3588
Add both PCIe3 controllers together with the shared PHY.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230717173512.65169-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-24 21:10:42 +02:00
Mark Brown
f061e2be86
ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 register
The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:

wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16

Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-24 20:10:35 +01:00
Palmer Dabbelt
ff09f6fd29 modpost, kallsyms: Treat add '$'-prefixed symbols as mapping symbols
Trying to restrict the '$'-prefix change to RISC-V caused some fallout,
so let's just treat all those symbols as special.

Fixes: c05780ef3c ("module: Ignore RISC-V mapping symbols too")
Link: https://lore.kernel.org/all/20230712015747.77263-1-wangkefeng.wang@huawei.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-07-24 12:09:47 -07:00
Mark Brown
c918008fe7
ASoC: da7219: Patches related to a spurious AAD IRQ
Merge series from Dmytro Maluka <dmy@semihalf.com>:

This series includes 2 patches related to (but not fixing) the following
I2C failure which occurs sometimes during system suspend or resume and
indicates a problem with a spurious DA7219 interrupt:

[  355.876211] i2c_designware i2c_designware.3: Transfer while suspended
[  355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440
...
[  355.876462] Call Trace:
[  355.876468]  <TASK>
[  355.876475]  ? update_load_avg+0x1b3/0x615
[  355.876484]  __i2c_transfer+0x101/0x1d8
[  355.876494]  i2c_transfer+0x74/0x10d
[  355.876504]  regmap_i2c_read+0x6a/0x9c
[  355.876513]  _regmap_raw_read+0x179/0x223
[  355.876521]  regmap_raw_read+0x1e1/0x28e
[  355.876527]  regmap_bulk_read+0x17d/0x1ba
[  355.876532]  ? __wake_up+0xed/0x1bb
[  355.876542]  da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184]
[  355.876556]  irq_thread+0x13c/0x231
[  355.876563]  ? irq_forced_thread_fn+0x5f/0x5f
[  355.876570]  ? irq_thread_fn+0x4d/0x4d
[  355.876576]  kthread+0x13a/0x152
[  355.876581]  ? synchronize_irq+0xc3/0xc3
[  355.876587]  ? kthread_blkcg+0x31/0x31
[  355.876592]  ret_from_fork+0x1f/0x30
[  355.876601]  </TASK>

This log shows that DA7219 AAD interrupt handler da7219_aad_irq_thread()
is unexpectedly running when DA7219 is suspended and should not generate
interrupts. As a result, the IRQ handler is trying to read AAD IRQ event
status over I2C and is hitting the I2C driver "Transfer while suspended"
failure.

Patch #1 adds synchronize_irq() when suspending DA7219, to prevent the
IRQ handler from running after suspending if there is a pending IRQ
generated before suspending. With this patch the above failure is still
reproducible, so this patch does not fix any real observed issue so far,
but at least is useful for confirming that the above issue is not caused
by a pending IRQ but rather looks like a DA7219 hardware issue with an
unexpectedly generated IRQ.

Patch #2 does not fix the above issue either, but it prevents its
potentially harmful side effects. With the existing code, if the issue
occurs and the IRQ handler fails to read the AAD IRQ events status over
I2C, it does not check that and tries to use the garbage uninitialized
value of the events status, potentially reporting bogus events. This
patch fixes that by adding missing error checking.

In fact I'm sending these patches not only to submit them for review but
also to ask Renesas folks for any hints on a possible cause of the
described DA7219 issue (AAD interrupts spuriously firing after jack
detection is already disabled) or how to debug it further.
2023-07-24 20:09:31 +01:00
Krzysztof Kozlowski
be9f6d5638 pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM
Add driver for pin controller in Low Power Audio SubSystem (LPASS).  The
driver is similar to SM8250 LPASS pin controller, with difference in one
new pin (gpio14) belonging to swr_tx_data.

Link: https://lore.kernel.org/r/20230719192058.433517-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-07-24 21:07:04 +02:00
Krzysztof Kozlowski
2b4e7a8727 dt-bindings: pinctrl: qcom,sm8350-lpass-lpi: add SM8350 LPASS TLMM
Add bindings for pin controller in SM8350 Low Power Audio SubSystem
(LPASS).

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230719192058.433517-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-07-24 21:07:04 +02:00
Stefan Haberland
856d8e3c63 s390/dasd: print copy pair message only for the correct error
The DASD driver has certain types of requests that might be rejected by
the storage server or z/VM because they are not supported. Since the
missing support of the command is not a real issue there is no user
visible kernel error message for this.

For copy pair setups  there is a specific error that IO is not allowed on
secondary devices. This error case is explicitly handled and an error
message is printed.

The code checking for the error did use a bitwise 'and' that is used to
check for specific bits. But in this case the whole sense byte has to
match.

This leads to the problem that the copy pair related error message is
erroneously printed for other error cases that are usually not reported.
This might heavily confuse users and lead to follow on actions that might
disrupt application processing.

Fix by checking the sense byte for the exact value and not single bits.

Cc: stable@vger.kernel.org # 6.1+
Fixes: 1fca631a11 ("s390/dasd: suppress generic error messages for PPRC secondary devices")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 13:05:29 -06:00
Stefan Haberland
8a2278ce9c s390/dasd: fix hanging device after request requeue
The DASD device driver has a function to requeue requests to the
blocklayer.
This function is used in various cases when basic settings for the device
have to be changed like High Performance Ficon related parameters or copy
pair settings.

The functions iterates over the device->ccw_queue and also removes the
requests from the block->ccw_queue.
In case the device is started on an alias device instead of the base
device it might be removed from the block->ccw_queue without having it
canceled properly before. This might lead to a hanging device since the
request is no longer on a queue and can not be handled properly.

Fix by iterating over the block->ccw_queue instead of the
device->ccw_queue. This will take care of all blocklayer related requests
and handle them on all associated DASD devices.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 13:05:29 -06:00
Stefan Haberland
acea28a6b7 s390/dasd: use correct number of retries for ERP requests
If a DASD request fails an error recovery procedure (ERP) request might
be built as a copy of the original request to do error recovery.

The ERP request gets a number of retries assigned.
This number is always 256 no matter what other value might have been set
for the original request. This is not what is expected when a user
specifies a certain amount of retries for the device via sysfs.

Correctly use the number of retries of the original request for ERP
requests.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 13:05:29 -06:00
Stefan Haberland
05f1d8ed03 s390/dasd: fix hanging device after quiesce/resume
Quiesce and resume are functions that tell the DASD driver to stop/resume
issuing I/Os to a specific DASD.

On resume dasd_schedule_block_bh() is called to kick handling of IO
requests again. This does unfortunately not cover internal requests which
are used for path verification for example.

This could lead to a hanging device when a path event or anything else
that triggers internal requests occurs on a quiesced device.

Fix by also calling dasd_schedule_device_bh() which triggers handling of
internal requests on resume.

Fixes: 8e09f21574 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")

Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 13:05:29 -06:00
FUKAUMI Naoki
c75b725ea6 arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b
add alias for sdmmc as mmc1.
make card detect work.

Fixes: ea3e66e7ad ("arm64: dts: rockchip: add SD card support to rock-5a")
Fixes: 2a6d4af5f1 ("arm64: dts: rockchip: Add SD card support to rock-5b")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20230722121150.130126-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-24 20:55:20 +02:00
Yogesh Hegde
ebceec271e arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
This patch fixes an issue affecting the Wifi/Bluetooth connectivity on
ROCK Pi 4 boards. Commit f471b1b2db ("arm64: dts: rockchip: Fix Bluetooth
on ROCK Pi 4 boards") introduced a problem with the clock configuration.
Specifically, the clock-names property of the sdio-pwrseq node was not
updated to 'lpo', causing the driver to wait indefinitely for the wrong clock
signal 'ext_clock' instead of the expected one 'lpo'. This prevented the proper
initialization of Wifi/Bluetooth chip on ROCK Pi 4 boards.

To address this, this patch updates the clock-names property of the
sdio-pwrseq node to "lpo" to align with the changes made to the bluetooth node.

This patch has been tested on ROCK Pi 4B.

Fixes: f471b1b2db ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards")
Cc: stable@vger.kernel.org
Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com>
Link: https://lore.kernel.org/r/ZLbATQRjOl09aLAp@zephyrusG14
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-24 20:51:25 +02:00
Daniel Borkmann
dc644b540a tcx: Fix splat in ingress_destroy upon tcx_entry_free
On qdisc destruction, the ingress_destroy() needs to update the correct
entry, that is, tcx_entry_update must NULL the dev->tcx_ingress pointer.
Therefore, fix the typo.

Fixes: e420bed025 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: syzbot+bdcf141f362ef83335cf@syzkaller.appspotmail.com
Reported-by: syzbot+b202b7208664142954fa@syzkaller.appspotmail.com
Reported-by: syzbot+14736e249bce46091c18@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+bdcf141f362ef83335cf@syzkaller.appspotmail.com
Tested-by: syzbot+b202b7208664142954fa@syzkaller.appspotmail.com
Tested-by: syzbot+14736e249bce46091c18@syzkaller.appspotmail.com
Tested-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230721233330.5678-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24 11:42:35 -07:00
Alexander Stein
49aa77165c
spi: lpspi: Add power-domains to the DT bindings
i.MX8(X) based SoC use a power domain. Allow supplying this domain in
bindings.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230721111020.1234278-2-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-24 19:28:24 +01:00
Thomas Zimmermann
9c053ef5c8 fbdev: Harmonize some comments in <linux/fb.h>
Make the comments for I/O, system and DMA memory say the same.
Makes the header file's structure more obvious.

Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-13-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
94fc7ad91b fbdev: Remove FB_DEFAULT_SYS_OPS
Remove the initializer macro FB_DEFAULT_SYS_OPS and its helper macro
__FB_DEFAULT_SYS_OPS_MMAP. There are no users.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Helge Deller <deller@gmx.de> (maintainer:FRAMEBUFFER LAYER)
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-12-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
f98eb6c0ea drm/omapdrm: Set fbdev FBINFO_VIRTFB flag
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is
in DMA-able memory and should be accessed with the CPU's regular
memory ops.

v2:
	* drop FBINFO_DEFAULT

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-11-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
da6eb399d4 drm/omapdrm: Use GEM mmap for fbdev emulation
The fbdev emulation currently uses fbdev's default mmap code, which
has been written for I/O memory. Provide an mmap that uses GEM's mmap
infrastructure.

Utilize fine-grained fbdev macros to initialize struct fb_ops. The
macros set the read/write and the draw callbacks for DMA memory. Set
the fb_mmap callback to omapdrm's new mmap helper. Also select the
correct Kconfig token for fbdev's DMA helpers. Note that the DMA
helpers are the same as for system memory.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-10-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
413b75745f drm/omapdrm: Set VM flags in GEM-object mmap function
Use the mmap callback in struct drm_gem_object_funcs to set the
VM flags. Replace a number of mmap helpers in omapdrm with their
GEM helper counterparts. Generate DRM's file-operations instance
with GEM's DEFINE_DRM_GEM_FOPS.

The omapdrm driver uses DRM's drm_gem_mmap() helper to prepare
the VMA structure. It then modifies the resulting VMA state in
its own helper omap_gem_mmap_obj(). The patch improves this by
setting up the VMA in the mmap callback in drm_gem_object_funcs,
which is called from within drm_gem_mmap().

Omapdrm's omap_gem_mmap() and omap_gem_mmap() can then be removed
from the driver. A call to drm_gem_mmap() is sufficient for the
mmap operation.

Finally, with the omap functions gone, the drivers file_ops in
omapdriver_fops can be generated with DEFINE_DRM_GEM_FOPS, which
sets DRM's default helpers.

v2:
	* detailed commit message (Javier)
	* do not set VM_PFNMAP

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-9-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
5ad315c8b2 drm/exynos: Set fbdev FBINFO_VIRTFB flag
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is
in DMA-able memory and should be accessed with the CPU's regular
memory ops.

v2:
	* drop FBINFO_FLAG_DEFAULT

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by : Inki Dae <inki.dae@samsung.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-8-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
b1d69bf1bf drm/exynos: Use fbdev DMA helpers
Use fbdev's DMA helpers for fbdev emulation. The driver previously
used the I/O-memory helpers, while allocating DMA-able system memory.
This could (in theory) result in bus errors from accessing the memory
range.

This bug has been present since the exynos driver was first added.

v2:
	* drop the pointless Fixes tag (Javier)
	* fix typo in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-7-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
ef28231b57 drm/tegra: Store pointer to vmap'ed framebuffer in screen_buffer
Tegra uses DMA-able memory, which has to be acessed with CPU ops
for system-memory. Store the framebuffer's vmap address in struct
fb_info.screen_buffer. The currently used field 'screen_base' is
for I/O memory.

Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-6-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
7a9e28ab49 drm/tegra: Set fbdev FBINFO_VIRTFB flag
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is
in DMA-able memory and should be accessed with the CPU's regular
memory ops.

v2:
	* drop FBINFO_DEFAULT

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-5-tzimmermann@suse.de
2023-07-24 20:14:43 +02:00
Thomas Zimmermann
f9400b17a7 drm/tegra: Use fbdev DMA helpers
Use fbdev's DMA helpers for fbdev emulation. They are equivalent to the
previously used system-memory helpers, so no functional changes here.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-4-tzimmermann@suse.de
2023-07-24 20:14:42 +02:00
Thomas Zimmermann
2529d46a03 drm/fbdev-dma: Use fbdev DMA helpers
Use fbdev's DMA helpers for fbdev-dma. They are equivalent to the
previously used system-memory helpers, so no functional changes here.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-3-tzimmermann@suse.de
2023-07-24 20:14:42 +02:00
Thomas Zimmermann
6f0f694162 fbdev: Add fb_ops init macros for framebuffers in DMA-able memory
Add initializer macros for struct fb_ops for framebuffers in DMA-able
memory areas. Also add a corresponding Kconfig token. As of now, this
is equivalent to system framebuffers and mostly useful for labeling
drivers correctly.

A later patch may add a generic DMA-specific mmap operation. Linux
offers a number of dma_mmap_*() helpers for different use cases.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-2-tzimmermann@suse.de
2023-07-24 20:14:29 +02:00
Luca Ceresoli
e6fa481643 drm/panel: db7430: remove unused variables
These variables are never referenced in the code.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719105829.148011-1-luca.ceresoli@bootlin.com
2023-07-24 19:55:53 +02:00
Jens Axboe
7b72d661f1 io_uring: gate iowait schedule on having pending requests
A previous commit made all cqring waits marked as iowait, as a way to
improve performance for short schedules with pending IO. However, for
use cases that have a special reaper thread that does nothing but
wait on events on the ring, this causes a cosmetic issue where we
know have one core marked as being "busy" with 100% iowait.

While this isn't a grave issue, it is confusing to users. Rather than
always mark us as being in iowait, gate setting of current->in_iowait
to 1 by whether or not the waiting task has pending requests.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/io-uring/CAMEGJJ2RxopfNQ7GNLhr7X9=bHXKo+G5OOe0LUq=+UgLXsv1Xg@mail.gmail.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217699
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217700
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Phil Elwell <phil@raspberrypi.com>
Tested-by: Andres Freund <andres@anarazel.de>
Fixes: 8a796565ce ("io_uring: Use io_schedule* in cqring wait")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24 11:44:35 -06:00
Mark Brown
85d12eda23
ALSA: hda: Adding support for CS35L56 on HDA
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

This set of patches adds support for using the CS35L56 boosted smart
amplifier on HDA systems. In these systems the CS35L56 audio is
routed through a HDA-to-I2S bridge codec.

This doesn't include the changes to the Realtek driver to actually hook
up the CS35L56 driver, because we don't yet have the QUIRK IDs to
associate it with. But we want to publish the driver now so that it is
available for bringing up hardware with the CS35L56.

The first 9 patches are moving code out of the ASoC driver and into the
shared library so that it can be shared with the HDA driver.

Patch #10 fixes missing #includes in the HDA headers so that the CS35L56
driver doesn't have to #include headers that it doesn't use.
2023-07-24 18:42:26 +01:00
Christian Brauner
20ea1e7d13 file: always lock position for FMODE_ATOMIC_POS
The pidfd_getfd() system call allows a caller with ptrace_may_access()
abilities on another process to steal a file descriptor from this
process. This system call is used by debuggers, container runtimes,
system call supervisors, networking proxies etc. So while it is a
special interest system call it is used in common tools.

That ability ends up breaking our long-time optimization in fdget_pos(),
which "knew" that if we had exclusive access to the file descriptor
nobody else could access it, and we didn't need the lock for the file
position.

That check for file_count(file) was always fairly subtle - it depended
on __fdget() not incrementing the file count for single-threaded
processes and thus included that as part of the rule - but it did mean
that we didn't need to take the lock in all those traditional unix
process contexts.

So it's sad to see this go, and I'd love to have some way to re-instate
the optimization. At the same time, the lock obviously isn't ever
contended in the case we optimized, so all we were optimizing away is
the atomics and the cacheline dirtying. Let's see if anybody even
notices that the optimization is gone.

Link: https://lore.kernel.org/linux-fsdevel/20230724-vfs-fdget_pos-v1-1-a4abfd7103f3@kernel.org/
Fixes: 8649c322f7 ("pid: Implement pidfd_getfd syscall")
Cc: stable@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-24 10:16:36 -07:00
Haixin Yu
9754353d0a perf pmu arm64: Fix reading the PMU cpu slots in sysfs
Commit f8ad6018ce ("perf pmu: Remove duplication around
EVENT_SOURCE_DEVICE_PATH") uses sysfs__read_ull() to read a full sysfs
path, which will never succeeds as it already comes with the sysfs mount
point in it, which sysfs__read_ull() will add again.

Fix it by reading the file using filename__read_ull(), that will not add
the sysfs mount point.

Fixes: f8ad6018ce ("perf pmu: Remove duplication around EVENT_SOURCE_DEVICE_PATH")
Signed-off-by: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Tested-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/ZL4G7rWXkfv-Ectq@B-Q60VQ05P-2326.local
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-24 13:40:52 -03:00