When MEC executes unmap_queue for mid command buffer preemption, it will
kick the write pointer of the gfx ring, set CP_VMID_PREEMPT to trigger the
preemption and wait for CP_VMID_PREEMPT becomes zero after the preemption
done. There is a race condition that PFP may excute the resetting command
before MEC set CP_VMID_PREEMPT. As a result, hang happens as
CP_VMID_PREEMPT is always 0xffff.
To avoid this, we send resetting CP_VMID_PREEMPT command after the trailing
fence is siganled and update gfx write pointer explicitly.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.3.x
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535
Add checking for NULL before calling nouveau_connector_detect_depth() in
nouveau_connector_get_modes() function because nv_connector->native_mode
could be dereferenced there since connector pointer passed to
nouveau_connector_detect_depth() and the same value of
nv_connector->native_mode is used there.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d4c2c99bdc ("drm/nouveau/dp: remove broken display depth function, use the improved one")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru
Add the -u/--user-thread option documentation for timerlat top/hist.
Link: https://lkml.kernel.org/r/bf727c8ccb8f50792200ae620141e047edf4af7a.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
osnoise runs 100% of time by default. It makes sense because osnoise
is preemptive. hwnoise checks preemption once a second, so it
reduces system progress.
Reduce runtime to 75% to avoid problems by default. I added a Fixes
as it might avoid problems for first time users as it lands on distros.
Link: https://lkml.kernel.org/r/af0b7113ffc00031b9af4bb40ef5889a27dadf8c.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Fixes: 1f428356c3 ("rtla: Add hwnoise tool")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Group all start tracing after finishing creating all instances.
The tracing instance starts first for the case of hitting a stop
tracing while enabling other instances. The trace instance is the
one with most valuable information.
Link: https://lkml.kernel.org/r/67da7a703a56f75d7cd46568525145a65501a7e8.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add auto-analysis to timerlat hist, including the --no-aa option to
reduce overhead and --dump-task. --aa-only was not added as it is
already on timerlat top.
Link: https://lkml.kernel.org/r/c2693f47ee83e659a7723fed8035f5d2534f528e.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, the auto-analysis is attached to the timerlat top instance.
The idea was to avoid creating another instance just for that, so one
instance could be reused.
The drawback is that, by doing so, the auto-analysis run for the entire
session, consuming CPU time. On my 24 box CPUs for timerlat with a 100
us period consumed 50 % with auto analysis, but only 16 % without.
By creating an instance for auto-analysis, we can keep the processing
stopped until a stop tracing condition is hit. Once it happens,
timerlat auto-analysis can use its own trace instance to parse only
the end of the trace.
By doing so, auto-analysis stop consuming cpu time when it is not
needed.
If the --aa-only is passed, the timerlat top instance is reused for
auto analysis.
Link: https://lkml.kernel.org/r/346b7168c1bae552a415715ec6d23c129a43bdb7.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the user sets -c <cpu-list> try to move rtla out of the <cpu-list>,
even without an -H option. This is useful to avoid having rtla
interfering with the workload.
This works by removing <cpu-list> from rtla's current affinity.
If rtla fails to move itself away it is not that of a problem as this
is an automatic measure.
Link: https://lkml.kernel.org/r/c54304d90c777310fb85a3e658d1449173759aab.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use a cpumask instead of a char *, reducing memory footprint and code.
No functional change, and in preparation for auto house-keeping.
Link: https://lkml.kernel.org/r/54c46293261d13cb1042d0314486539eeb45fe5d.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To avoid having rtla interfering with the measurement threads, add an
option for the user to set the CPUs in which rtla should run. For
instance:
# rtla timerlat top -H 0 -c 1-7
Will place rtla in the CPU 0, while running the measurement threads in
the CPU 1-7.
Link: https://lkml.kernel.org/r/6a6c78a579a96ba8b02ae67ee1e0ba2cb5e03c4a.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Suggested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The -C option sets a cgroup to the tracer's threads. If the -C option is
passed without arguments, the tracer's thread will inherit rtla's
cgroup. Otherwise, the threads will be placed on the cgroup passed
to the option.
Link: https://lkml.kernel.org/r/cb051477331d292f17c08bf1d66f0e0384bbe5a5.1686066600.git.bristot@kernel.org
Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 445164e8c1 ("spi: dw: Replace spi->chip_select references with
function calls") replaced direct access to spi.chip_select with
spi_*_chipselect calls but incorrectly replaced a set instance with a
get instance, replace the incorrect instance.
Fixes: 445164e8c1 ("spi: dw: Replace spi->chip_select references with function calls")
Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230613162103.569812-1-abe.kohandel@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
best_parent_rate entry is still being used in the code and needs to be
always updated regardless of the CLK_SET_RATE_NO_REPARENT flag.
Fixes: 1b4e99fda7 ("clk: Move no reparent case into a separate function")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230613131631.270192-1-m.szyprowski@samsung.com
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The devm_ioremap() function returns NULL on error, it never returns
error pointers.
Fixes: a77b2a0b12 ("soc: qcom: Introduce RPM master stats driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/ZH7sgpLAN23bCz9v@moroto
Jakub Kicinski says:
====================
tools: ynl-gen: improvements for DPLL
A set of improvements needed to generate the kernel code for DPLL.
====================
Link: https://lore.kernel.org/r/20230612155920.1787579-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of reimplementing policies in MutliAttr for every
underlying type forward the calls to the base type.
This will be needed for DPLL which uses a multi-attr nest,
and currently gets an invalid NLA_NEST policy generated.
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Scalar range validation assumes enums start at 0.
Teach it to properly calculate the value range.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for below fields coming in socinfo structure under v19:
* num_func_clusters: number of clusters with at least one functional core
* boot_cluster: cluster selected as boot cluster
* boot_core: core selected as boot core
While at it, rename some variables to align them with their
functionalities.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606134626.18790-3-quic_namajain@quicinc.com
Add support for below fields coming in socinfo structure under v18:
* num_kvps: number of key value pairs (KVP)
* kvps_offset: the offset of the KVP table from the base address of
socinfo structure in SMEM
KVP table has boolean values for certain feature flags, used to determine
hardware configuration.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606134626.18790-2-quic_namajain@quicinc.com
Add support for the lpass audio clock controller found on SC8280XP based
devices. This would allow lpass peripheral loader drivers to control the
clocks and bring the subsystems out of reset.
Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-5-srinivas.kandagatla@linaro.org
Add support for the lpass clock controller found on SC8280XP based devices.
This would allow lpass peripheral loader drivers to control the clocks and
bring the subsystems out of reset.
Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-4-srinivas.kandagatla@linaro.org
The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset
support when it is under the control of Q6DSP.
Add support for those resets and adds IDs for clients to request the reset.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-3-srinivas.kandagatla@linaro.org
The LPASS (Low Power Audio Subsystem) clock controller provides reset
support when it is under the control of Q6DSP.
Add support for those resets and adds IDs for clients to request the reset.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-2-srinivas.kandagatla@linaro.org
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C. The recording links were not tested,
but should be similar to previous platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-2-krzysztof.kozlowski@linaro.org
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C. The recording links were not tested,
but should be similar to previous platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-1-krzysztof.kozlowski@linaro.org
Add basic devicetree support for SDX75 platform and IDP board from
Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-6-git-send-email-quic_rohiagar@quicinc.com
The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.
Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-4-a288f24af81b@linaro.org
The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.
This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.
Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220739.1886155-1-quic_bjorande@quicinc.com
The adreno smmu should be compatible with qcom,adreno-smmu as well for
per-process page tables to work.
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220532.1884860-1-quic_bjorande@quicinc.com
&dispcc status was changed to okay by default in the platform, no need
to do it again in the board.
Fixes: 2ce38cc1e8 ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220420.1884631-1-quic_bjorande@quicinc.com
With wider usage on more boards, there have been reports of the
following:
[ 315.016174] qcom-ethqos 20000.ethernet eth0: no phy at addr -1
[ 315.016179] qcom-ethqos 20000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)
which has been fairly random and isolated to specific boards.
Early reports were written off as a hardware issue, but it has been
prevalent enough on boards that theory seems unlikely.
In bring up of a newer piece of hardware, similar was seen, but this
time _consistently_. Moving the reset to the mdio bus level (which isn't
exactly a lie, it is the only device on the bus so one could model it as
such) fixed things on that platform. Analysis on sa8540p-ride shows that
the phy's reset is not being handled during the OUI scan if the reset
lives in the phy node:
# gpio 752 is the reset, and is active low, first mdio reads are the OUI
modprobe-420 [006] ..... 154.738544: mdio_access: stmmac-0 read phy:0x08 reg:0x02 val:0x0141
modprobe-420 [007] ..... 154.738665: mdio_access: stmmac-0 read phy:0x08 reg:0x03 val:0x0dd4
modprobe-420 [004] ..... 154.741357: gpio_value: 752 set 1
modprobe-420 [004] ..... 154.741358: gpio_direction: 752 out (0)
modprobe-420 [004] ..... 154.741360: gpio_value: 752 set 0
modprobe-420 [006] ..... 154.762751: gpio_value: 752 set 1
modprobe-420 [007] ..... 154.846857: gpio_value: 752 set 1
modprobe-420 [004] ..... 154.937824: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
modprobe-420 [004] ..... 154.937932: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014
Moving it to the bus level, or specifying the OUI in the phy's
compatible ensures the reset is handled before any mdio access
Here is tracing with the OUI approach (which skips scanning the OUI):
modprobe-549 [007] ..... 63.860295: gpio_value: 752 set 1
modprobe-549 [007] ..... 63.860297: gpio_direction: 752 out (0)
modprobe-549 [007] ..... 63.860299: gpio_value: 752 set 0
modprobe-549 [004] ..... 63.882599: gpio_value: 752 set 1
modprobe-549 [005] ..... 63.962132: gpio_value: 752 set 1
modprobe-549 [006] ..... 64.049379: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
modprobe-549 [006] ..... 64.049490: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014
The OUI approach is taken given the description matches the situation
perfectly (taken from ethernet-phy.yaml):
- pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
description:
If the PHY reports an incorrect ID (or none at all) then the
compatible list may contain an entry with the correct PHY ID
in the above form.
The first group of digits is the 16 bit Phy Identifier 1
register, this is the chip vendor OUI bits 3:18. The
second group of digits is the Phy Identifier 2 register,
this is the chip vendor OUI bits 19:24, followed by 10
bits of a vendor specific ID.
With this in place the sa8540p-ride's phy is probing consistently, so
it seems the floating reset during mdio access was the issue. In either
case, it shouldn't be floating so this improves the situation. The below
link discusses some of the relationship of mdio, its phys, and points to
this OUI compatible as a way to opt out of the OUI scan pre-reset
handling which influenced this decision.
Link: https://lore.kernel.org/all/dca54c57-a3bd-1147-63b2-4631194963f0@gmail.com/
Fixes: 57827e87be ("arm64: dts: qcom: sa8540p-ride: Add ethernet nodes")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608201513.882950-1-ahalaney@redhat.com