Commit graph

1,215,304 commits

Author SHA1 Message Date
Mark Brown
0eff26b13d
ASoC: cs35l30: Use maple tree register cache
The cs35l30 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-10-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:08 +01:00
Mark Brown
ce598b2f83
ASoC: cs43130: Use maple tree register cache
The cs43130 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-9-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:08 +01:00
Mark Brown
62145b0a53
ASoC: cs42l83: Use maple tree register cache
The cs42l83 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-8-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:07 +01:00
Mark Brown
7e39a71876
ASoC: cs42l73: Use maple tree register cache
The cs42l73 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-7-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:06 +01:00
Mark Brown
6b7fed83c9
ASoC: cs42l42: Use maple tree register cache
The cs42l42 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-6-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:05 +01:00
Mark Brown
bb1bd25ad7
ASoC: cs4234: Use maple tree register cache
The cs4234 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-5-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:04 +01:00
Mark Brown
28f851babc
ASoC: cs35l35: Use maple tree register cache
The cs35l35 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-4-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:03 +01:00
Mark Brown
e7795f2d29
ASoC: cs35l34: Use maple tree register cache
The cs35l34 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-3-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:02 +01:00
Mark Brown
7a230512d3
ASoC: cs35l33: Use maple tree register cache
The cs35l33 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-2-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:01 +01:00
Mark Brown
176bb179f1
ASoC: cs35l32: Use maple tree register cache
The cs35l32 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.

Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-1-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:11:00 +01:00
Jon Hunter
f9fd804aa0
ASoC: tegra: Fix Master Volume Control
Commit 3ed2b549b3 ("ALSA: pcm: fix wait_time calculations") corrected
the PCM wait_time calculations and in doing so reduced the calculated
wait_time. This exposed an issue with the Tegra Master Volume Control
(MVC) device where the reduced wait_time caused the MVC to fail. For now
fix this by setting the default wait_time for Tegra to be 500ms.

Fixes: 3ed2b549b3 ("ALSA: pcm: fix wait_time calculations")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230613093453.13927-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-13 12:10:56 +01:00
Jan Kara
404615d7f1 ext2: Drop fragment support
Ext2 has fields in superblock reserved for subblock allocation support.
However that never landed. Drop the many years dead code.

Reported-by: syzbot+af5e10f73dbff48f70af@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
2023-06-13 12:37:31 +02:00
Hans de Goede
9ce9308691 Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans 2023-06-13 12:37:05 +02:00
Srinivas Pandruvada
b77b75fc61 platform/x86: ISST: Fix usage counter
On multi package system, the TPMI SST instance is getting allocated
again as the usage counter is not getting incremented. Here the
instance is allocated only when the usage count is zero. There is
no need to allocate again.

Increment usage ID on successful return from isst_if_cdev_register().

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230612224033.2382527-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-13 12:35:00 +02:00
Srinivas Pandruvada
fa5e68b1c1 platform/x86: ISST: Reset default callback on unregister
When multiple clients are registered and some of those modules are
removed, the default IOCTL callback for those clients are still not
NULL. Calling them will result in crash.

Set the default IOCTL callback pointer to NULL on unregister.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230612224033.2382527-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-13 12:34:50 +02:00
Christophe JAILLET
f3710f5e9e tty: serial: samsung_tty: Use abs() to simplify some code
Use abs() instead of hand-writing it.

Suggested-by: Walter Harms <wharms@bfs.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <7bd165e82ed3675d4ddee343ab373031e995a126.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:33:22 +02:00
Christophe JAILLET
832e231cff tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
When the best clk is searched, we iterate over all possible clk.

If we find a better match, the previous one, if any, needs to be freed.
If a better match has already been found, we still need to free the new
one, otherwise it leaks.

Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:33:22 +02:00
Christophe JAILLET
a9c09546e9 tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
If clk_get_rate() fails, the clk that has just been allocated needs to be
freed.

Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:33:22 +02:00
Uwe Kleine-König
aeaee158c2 platform/x86: int3472: Switch back to use struct i2c_driver's .probe()
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230612073902.840435-4-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-13 12:32:47 +02:00
Uwe Kleine-König
bba73a1d05 platform/x86: asus-tf103c-dock: Switch back to use struct i2c_driver's .probe()
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230612073902.840435-3-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-13 12:32:45 +02:00
Uwe Kleine-König
8802fcfb57 platform/surface: surface3_power: Switch back to use struct i2c_driver's .probe()
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230612073902.840435-2-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-13 12:32:16 +02:00
Robert Hodaszi
a82c3df955 tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A
LS1028A is using DMA with LPUART. Having RX watermark set to 1, means
DMA transactions are started only after receiving the second character.

On other platforms with newer LPUART IP, Receiver Idle Empty function
initiates the DMA request after the receiver is idling for 4 characters.
But this feature is missing on LS1028A, which is causing a 1-character
delay in the RX direction on this platform.

Set RX watermark to 0 to initiate RX DMA after each character.

Link: https://lore.kernel.org/linux-serial/20230607103459.1222426-1-robert.hodaszi@digi.com/
Fixes: 9ad9df8447 ("tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case")
Cc: stable <stable@kernel.org>
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Message-ID: <20230609121334.1878626-1-robert.hodaszi@digi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:31:45 +02:00
David E. Box
f2b689ab2f platform/x86/intel/pmc/mtl: Put devices in D3 during resume
An earlier commit placed some driverless devices in D3 during boot so that
they don't block package cstate entry on Meteor Lake. Also place these
devices in D3 after resume from suspend.

Fixes: 336ba968d3 ("platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230607233849.239047-2-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-13 12:30:02 +02:00
David E. Box
801e5dc985 platform/x86/intel/pmc: Add resume callback
Add a resume callback to perform platform specific functions during resume
from suspend.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230607233849.239047-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-13 12:29:33 +02:00
Uwe Kleine-König
d9f59caf94 serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
The need to handle the FSL variant of 8250 in a special way is also
present without console support. So soften the dependency for
SERIAL_8250_FSL from SERIAL_8250_CONSOLE to SERIAL_8250. To handle
SERIAL_8250=m, the FSL code can be modular, too, thus SERIAL_8250_FSL
becomes tristate.

Compiling 8250_fsl as a module requires adding a module license so this
is added, too. While add it also add a appropriate module description.

As then SERIAL_OF_PLATFORM=y + SERIAL_8250_FSL=m is a valid combination
(if COMPILE_TEST is enabled on a platform that is neither PPC, ARM nor
ARM64), the check in 8250_of.c must be weakened a bit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20230609133932.786117-3-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:27:05 +02:00
Uwe Kleine-König
1eea99c045 powerpc/legacy_serial: Handle SERIAL_8250_FSL=n build failures
With SERIAL_8250=y and SERIAL_8250_FSL_CONSOLE=n the both
IS_ENABLED(CONFIG_SERIAL_8250) and IS_REACHABLE(CONFIG_SERIAL_8250)
evaluate to true and so fsl8250_handle_irq() is used. However this
function is only available if CONFIG_SERIAL_8250_CONSOLE=y (and thus
SERIAL_8250_FSL=y).

To prepare SERIAL_8250_FSL becoming tristate and being enabled in more
cases, check for IS_REACHABLE(CONFIG_SERIAL_8250_FSL) before making use
of fsl8250_handle_irq(). This check is correct with and without the
change to make SERIAL_8250_FSL modular.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 66eff0ef52 ("powerpc/legacy_serial: Warn about 8250 devices operated without active FSL workarounds")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Message-ID: <20230609133932.786117-2-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:27:04 +02:00
Mark Pearson
f999e23ce6 platform/x86: thinkpad_acpi: Fix lkp-tests warnings for platform profiles
Fix issues identified in dytc_profile_refresh identified by lkp-tests.
drivers/platform/x86/thinkpad_acpi.c:10538
	dytc_profile_refresh() error: uninitialized symbol 'funcmode'.
drivers/platform/x86/thinkpad_acpi.c:10531
	dytc_profile_refresh() error: uninitialized symbol 'output'.
drivers/platform/x86/thinkpad_acpi.c:10537
	dytc_profile_refresh() error: uninitialized symbol 'output'.

These issues should not lead to real problems in the field as the refresh
function should only be called if MMC or PSC mode enabled. But good to fix.

Thanks to Dan Carpenter and the lkp-tests project for flagging these.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202306011202.1hbgLRD4-lkp@intel.com/
Fixes: 1bc5d819f0 ("platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230606151804.8819-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-13 12:25:38 +02:00
Ratchanan Srirattanamet
11d24327c2 drm/nouveau: don't detect DSM for non-NVIDIA device
The call site of nouveau_dsm_pci_probe() uses single set of output
variables for all invocations. So, we must not write anything to them
unless it's an NVIDIA device. Otherwise, if we are called with another
device after the NVIDIA device, we'll clober the result of the NVIDIA
device.

For example, if the other device doesn't have _PR3 resources, the
detection later would miss the presence of power resource support, and
the rest of the code will keep using Optimus DSM, breaking power
management for that machine.

Also, because we're detecting NVIDIA's DSM, it doesn't make sense to run
this detection on a non-NVIDIA device anyway. Thus, check at the
beginning of the detection code if this is an NVIDIA card, and just
return if it isn't.

This, together with commit d22915d22d ("drm/nouveau/devinit/tu102-:
wait for GFW_BOOT_PROGRESS == COMPLETED") developed independently and
landed earlier, fixes runtime power management of the NVIDIA card in
Lenovo Legion 5-15ARH05. Without this patch, the GPU resumption code
will "timeout", sometimes hanging userspace.

As a bonus, we'll also stop preventing _PR3 usage from the bridge for
unrelated devices, which is always nice, I guess.

Fixes: ccfc2d5cdb ("drm/nouveau: Use generic helper to check _PR3 presence")
Signed-off-by: Ratchanan Srirattanamet <peathot@hotmail.com>
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/79
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/DM6PR19MB2780805D4BE1E3F9B3AC96D0BC409@DM6PR19MB2780.namprd19.prod.outlook.com
2023-06-13 12:18:08 +02:00
Badhri Jagan Sridharan
286d9975a8 usb: gadget: udc: core: Prevent soft_connect_store() race
usb_udc_connect_control(), soft_connect_store() and
usb_gadget_deactivate() can potentially race against each other to invoke
usb_gadget_connect()/usb_gadget_disconnect(). To prevent this, guard
udc->started, gadget->allow_connect, gadget->deactivate and
gadget->connect with connect_lock so that ->pullup() is only invoked when
the gadget is bound, started and not deactivated. The routines
usb_gadget_connect_locked(), usb_gadget_disconnect_locked(),
usb_udc_connect_control_locked(), usb_gadget_udc_start_locked(),
usb_gadget_udc_stop_locked() are called with this lock held.

An earlier version of this commit was reverted due to the crash reported in
https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/.
commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing")
addresses the crash reported.

Cc: stable@vger.kernel.org
Fixes: 628ef0d273 ("usb: udc: add usb_udc_vbus_handler")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Message-ID: <20230609010227.978661-2-badhri@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:16:34 +02:00
Badhri Jagan Sridharan
50966da807 usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
usb_udc_vbus_handler() can be invoked from interrupt context by irq
handlers of the gadget drivers, however, usb_udc_connect_control() has
to run in non-atomic context due to the following:
a. Some of the gadget driver implementations expect the ->pullup
   callback to be invoked in non-atomic context.
b. usb_gadget_disconnect() acquires udc_lock which is a mutex.

Hence offload invocation of usb_udc_connect_control()
to workqueue.

UDC should not be pulled up unless gadget driver is bound. The new flag
"allow_connect" is now set by gadget_bind_driver() and cleared by
gadget_unbind_driver(). This prevents work item to pull up the gadget
even if queued when the gadget driver is already unbound.

Cc: stable@vger.kernel.org
Fixes: 1016fc0c09 ("USB: gadget: Fix obscure lockdep violation for udc_mutex")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Message-ID: <20230609010227.978661-1-badhri@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:16:34 +02:00
Pavan Holla
92c9c3baad usb: typec: Fix fast_role_swap_current show function
The current implementation mistakenly performs a & operation on
the output of sysfs_emit. This patch performs the & operation before
calling sysfs_emit.

Fixes: 662a60102c ("usb: typec: Separate USB Power Delivery from USB Type-C")
Cc: stable <stable@kernel.org>
Reported-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Pavan Holla <pholla@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Message-ID: <20230607193328.3359487-1-pholla@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:16:07 +02:00
Xu Yang
53d061c19d usb: chipidea: imx: add missing USB PHY DPDM wakeup setting
USB PHY DPDM wakeup bit is enabled by default, when USB wakeup
is not required(/sys/.../wakeup is disabled), this bit should be
disabled, otherwise we will have unexpected wakeup if do USB device
connect/disconnect while system sleep.
This bit can be enabled for both host and device mode.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:05:42 +02:00
Xu Yang
0ac37fbdad usb: chipidea: imx: turn off vbus comparator when suspend
As we use bvalid for vbus wakeup source, to save power when
suspend, turn off the vbus comparator for imx7d and imx8mm.

Below is this bit description from RM of iMX8MM
"VBUS Valid Comparator Enable:

This signal controls the USB OTG PHY VBUS Valid comparator which
indicates whether the voltage on the USB_OTG*_VBUS pin is below
the VBUS Valid threshold. The VBUS Valid threshold is nominally
4.75V on this USB PHY. The VBUS Valid threshold can be adjusted
using the USBNC_OTGn_PHY_CFG1[OTGTUNE0] bit field. Status of the
VBUS Valid comparator, when it is enabled, is reported on the
USBNC_OTGn_PHY_STATUS[VBUS_VLD] bit.
When OTGDISABLE0 (USBNC_USB_OTGx_PHY_CFG2[10])is set to 1'b0 and
DRVVBUS0 is set to 1'b1, the Bandgap circuitry and VBUS Valid
comparator are powered, even in Suspend or Sleep mode.
DRVVBUS0 should be reset to 1'b0 when the internal VBUS Valid comparator
is not required, to reduce quiescent current in Suspend or Sleep mode.
 - 0 The VBUS Valid comparator is disabled
  - 1 The VBUS Valid comparator is enabled"

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230517081907.3410465-2-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 12:05:42 +02:00
Pawel Laszczak
41e2f976b5 MAINTAINERS: add Cadence USBHS driver entry
Patch adds entry for USBHS (CDNS2) driver into MAINTARNERS file

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Message-ID: <20230602102644.77470-5-pawell@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:59:29 +02:00
Pawel Laszczak
07a3aef249 usb: cdns2: Add tracepoints for CDNS2 driver
Patch adds the series of tracepoints that can be used for
debugging issues detected in driver.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Message-ID: <20230602102644.77470-4-pawell@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:59:29 +02:00
Pawel Laszczak
3eb1f1efe2 usb: cdns2: Add main part of Cadence USBHS driver
This patch introduces the main part of Cadence USBHS driver
to Linux kernel.
To reduce the patch size a little bit, the header file gadget.h was
intentionally added as separate patch.

The Cadence USB 2.0 Controller is a highly configurable IP Core which
supports both full and high speed data transfer.

The current driver has been validated with FPGA platform. We have
support for PCIe bus, which is used on FPGA prototyping.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Message-ID: <20230602102644.77470-3-pawell@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:59:29 +02:00
Pawel Laszczak
0ca2026eea usb: cdns2: Device side header file for CDNS2 driver
Patch defines macros, registers and structures used by
Device side driver.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Message-ID: <20230602102644.77470-2-pawell@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:59:29 +02:00
Christophe JAILLET
01052b91c9 usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe()
If dwc3_meson_g12a_otg_init() fails, resources allocated by the previous
of_platform_populate() call should be released, as already done in the
error handling path.

Fixes: 1e355f21d3 ("usb: dwc3: Add Amlogic A1 DWC3 glue")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <9d28466de1808ccc756b4cc25fc72c482d133d13.1686403934.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:59:01 +02:00
Jeff Layton
a053d9dc45 usb: update the ctime as well when updating mtime after an ioctl
In general, POSIX requires that when the mtime is updated that the ctime
be updated as well. Add the missing timestamp updates to the usb ioctls.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-ID: <20230612104524.17058-3-jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:58:50 +02:00
Roy Luo
83cb2604f6 usb: core: add sysfs entry for usb device state
Expose usb device state to userland as the information is useful in
detecting non-compliant setups and diagnosing enumeration failures.
For example:
- End-to-end signal integrity issues: the device would fail port reset
  repeatedly and thus be stuck in POWERED state.
- Charge-only cables (missing D+/D- lines): the device would never enter
  POWERED state as the HC would not see any pullup.

What's the status quo?
We do have error logs such as "Cannot enable. Maybe the USB cable is bad?"
to flag potential setup issues, but there's no good way to expose them to
userspace.

Why add a sysfs entry in struct usb_port instead of struct usb_device?
The struct usb_device is not device_add() to the system until it's in
ADDRESS state hence we would miss the first two states. The struct
usb_port is a better place to keep the information because its life
cycle is longer than the struct usb_device that is attached to the port.

Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202306042228.e532af6e-oliver.sang@intel.com
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Roy Luo <royluo@google.com>
Message-ID: <20230608015913.1679984-1-royluo@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:58:26 +02:00
Prashanth K
edd60d24bd usb: common: usb-conn-gpio: Set last role to unknown before initial detection
Currently if we bootup a device without cable connected, then
usb-conn-gpio won't call set_role() since last_role is same as
current role. This happens because during probe last_role gets
initialised to zero.

To avoid this, added a new constant in enum usb_role, last_role
is set to USB_ROLE_UNKNOWN before performing initial detection.

While at it, also handle default case for the usb_role switch
in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid
build warnings.

Fixes: 4602f3bff2 ("usb: common: add USB GPIO based connection detection driver")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:57:49 +02:00
Xu Yang
9a070e8e20 usb: chipidea: imx: don't request QoS for imx8ulp
Use dedicated imx8ulp usb compatible to remove QoS request
since imx8ulp has no such limitation of imx7ulp: DMA will
not work if system enters idle.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230530104007.1294702-2-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:57:11 +02:00
Xu Yang
52ff079ded dt-bindings: usb: ci-hdrc-usb2: add fsl,imx8ulp-usb compatible
The imx8ulp and imx8dxl are compatible. This will add fsl,imx8ulp-usb
to the compatible property.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20230530104007.1294702-1-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:57:10 +02:00
Andrew Halaney
60d5b71933 usb: dwc3: qcom: use dev_err_probe() where appropriate
Update to using dev_err_probe() throughout to reduce spam and log useful
information in devices_deferred.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Message-ID: <20230605193625.63187-1-ahalaney@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:57:01 +02:00
Christophe JAILLET
4a944da707 usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()
If dwc3_qcom_create_urs_usb_platdev() fails, some resources still need to
be released, as already done in the other error handling path of the
probe.

Fixes: c25c210f59 ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Message-ID: <b69fa8dd68d816e7d24c88d3eda776ceb28c5dc5.1685890571.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:56:34 +02:00
Christophe JAILLET
8fd95da2cf usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()
In the probe, some resources are allocated with
dwc3_qcom_of_register_core() or dwc3_qcom_acpi_register_core(). The
corresponding resources are already coorectly freed in the error handling
path of the probe, but not in the remove function.

Fix it.

Fixes: 2bc02355f8 ("usb: dwc3: qcom: Add support for booting with ACPI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Message-ID: <c0215a84cdf18fb3514c81842783ec53cf149deb.1685891059.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:56:31 +02:00
David Disseldorp
6b394dbb64 usb: gadget: f_mass_storage: remove unnecessary open check
The fsg_lun_is_open() test can be eliminated and the code merged with
the preceding conditional, because the LUN won't be open if
cfg->filename wasn't set. Similarly, the error_lun label will never be
reached with an open lun (non-null filp) so remove the unnecessary
fsg_lun_close() call.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Message-ID: <20230607215401.22563-1-ddiss@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:56:11 +02:00
Avichal Rakesh
5ae8a35459 usb: gadget: uvc: clean up comments and styling in video_pump
This patch elaborates on some of the edge cases handled by
video_pump around setting no_interrupt flag, and brings the
code style in line with rest of the file.

Link: https://lore.kernel.org/20230602151916.GH26944@pendragon.ideasonboard.com/
Signed-off-by: Avichal Rakesh <arakesh@google.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Message-ID: <20230602220455.313801-1-arakesh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:55:38 +02:00
Piyush Mehta
152669f844 usb: gadget: udc: udc-xilinx: Add identifier to read_fn function arg
Add an identifier in the read_fn function declaration because based on
commit ca0d8929e7 ("checkpatch: add warning for unnamed function
definition arguments") it is the preferred coding style even C standard
allows both formats.

Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Message-ID: <20230607072959.2334046-1-piyush.mehta@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:55:26 +02:00
Christophe JAILLET
f817f271da usb: usb251xb: Use of_property_read_u16()
Use of_property_read_u16() instead of of_property_read_u16_array() when
only 1 element is read.
This slightly simplifies the code.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <97478908a814d4fa694e0ca44212c3776cf3e6e9.1685877052.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13 11:55:18 +02:00