The enhanced detection introduced in commit '210d12c819 ("soc: qcom:
mdt_loader: Enhance split binary detection")' requires that all segments
lies within the file on disk.
But the Qualcomm firmware files consistently has a BSS-like segment at
the end, with a p_offset aligned to the next 4k boundary. As the p_size
is 0 and there's nothing to load, the image is not padded to cover this
(empty) segment.
Ignore zero-sized segments when determining if the image is split, to
avoid this problem.
Fixes: 210d12c819 ("soc: qcom: mdt_loader: Enhance split binary detection")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # qrb5165-rb5
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612215804.1883458-1-quic_bjorande@quicinc.com
The xo clock being used everywhere actually goes via the RPM. Since the
rpmcc driver recently got support for this clock we can use this now.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-1-83a2dfc986ab@z3ntu.xyz
Define clock/clock-names properties of the MMCC device node to be used
on MSM8226 platform.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-2-83a2dfc986ab@z3ntu.xyz
WARN and continue if misc_cg_set_capacity() fails, as the only scenario
in which it can fail is if the specified resource is invalid, which should
never happen when CONFIG_KVM_AMD_SEV=y. Deliberately not bailing "fixes"
a theoretical bug where KVM would leak the ASID bitmaps on failure, which
again can't happen.
If the impossible should happen, the end result is effectively the same
with respect to SEV and SEV-ES (they are unusable), while continuing on
has the advantage of letting KVM load, i.e. userspace can still run
non-SEV guests.
Reported-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20230607004449.1421131-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, ASoC supports dailinks with the following mappings:
1 cpu DAI to N codec DAIs
N cpu DAIs to N codec DAIs
But the mapping between N cpu DAIs and M codec DAIs is not supported.
The reason is that we didn't have a mechanism to map cpu and codec DAIs
This series suggests a new snd_soc_dai_link_codec_ch_map struct in
struct snd_soc_dai_link{} which provides codec DAI to cpu DAI mapping
information used to implement N cpu DAIs to M codec DAIs support.
And add the codec_ch_maps to SOF SoundWire machine driver.
Merge series from Mark Brown <broonie@kernel.org>:
A lot of the Cirrus Logic devices only support single register
read/write operations so they get no benefit from using the rbtree cache
over the more modern maple tree cache, convert them to use maple tree.
Add a "never" option to the nx_huge_pages module param to allow userspace
to do a one-way hard disabling of the mitigation, and don't create the
per-VM recovery threads when the mitigation is hard disabled. Letting
userspace pinky swear that userspace doesn't want to enable NX mitigation
(without reloading KVM) allows certain use cases to avoid the latency
problems associated with spawning a kthread for each VM.
E.g. in FaaS use cases, the guest kernel is trusted and the host may
create 100+ VMs per logical CPU, which can result in 100ms+ latencies when
a burst of VMs is created.
Reported-by: Li RongQing <lirongqing@baidu.com>
Closes: https://lore.kernel.org/all/1679555884-32544-1-git-send-email-lirongqing@baidu.com
Cc: Yong He <zhuangel570@gmail.com>
Cc: Robert Hoo <robert.hoo.linux@gmail.com>
Cc: Kai Huang <kai.huang@intel.com>
Reviewed-by: Robert Hoo <robert.hoo.linux@gmail.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Luiz Capitulino <luizcap@amazon.com>
Reviewed-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20230602005859.784190-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refresh comments about msrs_to_save, emulated_msrs, and msr_based_features
to remove stale references left behind by commit 2374b7310b (KVM:
x86/pmu: Use separate array for defining "PMU MSRs to save"), and to
better reflect the current reality, e.g. emulated_msrs is no longer just
for MSRs that are "kvm-specific".
Reported-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20230607004636.1421424-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The encoder hooks already get passed the crtc state so just
grab the crtc from there instead of from the connector state.
This is generally what everyone else does, so no reason for
icl_dsi.c to be different.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608203057.23759-13-ville.syrjala@linux.intel.com
encoder->disable() is supposed to happen before the pipe/transcoder
gets disabled. The icl+ DSI code screwed that up and put most things
(including the transcoder disable itself) into encoder->disable().
Follow the common rules and hoist most things into the
encoder->post_disable() hook.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608203057.23759-9-ville.syrjala@linux.intel.com
The programming of the DPHY vs. DSI _TIMING registers are
two separate steps in the TGL+ bspec sequence, with some
other stuff in between. Implement the same split.
Windows also seems follow the bspec TGL+ sequence, even
on ICL/JSL.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608203057.23759-5-ville.syrjala@linux.intel.com
Document kdump.rst was added into Documentation/arm64/, but not listed
in Documentation/arm64/index.rst. That triggers below warning when
executing "make htmldoc":
>> Documentation/arm64/kdump.rst: WARNING: document isn't included in any toctree
Fix it now.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306110549.ynH2Juok-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Fixes: 03dc0e0540 ("Documentation: add kdump.rst to present crashkernel reservation on arm64")
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230611230358.13635-1-bhe@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Doing the init OTP and display on DSI sequences back to back
doesn't really make any sense (a single sequence would suffice
then). Move the display on sequence to be done just before
backlight on, which is also what Windows does.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608203057.23759-3-ville.syrjala@linux.intel.com
Looks like we're trying to talk to the DSI panel even before turning
it on, on icl+. Bspec doesn't actually specify when these should be
done, but certainly we need to turn the panel on at least before
talking to it. So let's move the power on + reset deassert steps to
be the first thing we do. This is also what Windows does.
v2: s/intel_dsi_msleep/msleep/
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608203057.23759-2-ville.syrjala@linux.intel.com
Export Passive version 2 table similar to the way _TRT and _ART tables
via IOCTLs.
This removes need for binary utility to read ACPI Passive 2 table by
providing open source support. This table already has open source
implementation in the user space thermald, when the table is part of
data vault exported by the int3400 sysfs.
This table is supported in some older platforms before Ice Lake
generation.
Passive 2 tables contain multiple entries. Each entry has following
fields:
* Source: Named Reference (String). This is the source device for
temperature.
* Target: Named Reference (String). This is the target device to
control.
* Priority: Priority of this device compared to others.
* SamplingPeriod: Time Period in 1/10 of seconds unit.
* PassiveTemp: Passive Temperature in 1/10 of Kelvin.
* SourceDomain: Domain for the source (00:Processor, others reserved).
* ControlKnob: Type of control knob (00:Power Limit 1, others: reserved)
* Limit: The target state to set on reaching passive temperature.
This can be a string "max", "min" or a power limit value.
* LimitStepSize: Step size during activation.
* UnLimitStepSize: Step size during deactivation.
* Reserved1: Reserved
Three IOCTLs are added similar to IOCTLs for reading TRT:
ACPI_THERMAL_GET_PSVT_COUNT: Number of passive 2 entries.
ACPI_THERMAL_GET_PSVT_LEN: Total return data size (count x each
passive 2 entry size).
ACPI_THERMAL_GET_PSVT: Get the data as an array of objects with
passive 2 entries.
This change is based on original development done by:
Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I found a corruption during growfs:
XFS (loop0): Internal error agbno >= mp->m_sb.sb_agblocks at line 3661 of
file fs/xfs/libxfs/xfs_alloc.c. Caller __xfs_free_extent+0x28e/0x3c0
CPU: 0 PID: 573 Comm: xfs_growfs Not tainted 6.3.0-rc7-next-20230420-00001-gda8c95746257
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_corruption_error+0x134/0x150
__xfs_free_extent+0x2c1/0x3c0
xfs_ag_extend_space+0x291/0x3e0
xfs_growfs_data+0xd72/0xe90
xfs_file_ioctl+0x5f9/0x14a0
__x64_sys_ioctl+0x13e/0x1c0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
XFS (loop0): Corruption detected. Unmount and run xfs_repair
XFS (loop0): Internal error xfs_trans_cancel at line 1097 of file
fs/xfs/xfs_trans.c. Caller xfs_growfs_data+0x691/0xe90
CPU: 0 PID: 573 Comm: xfs_growfs Not tainted 6.3.0-rc7-next-20230420-00001-gda8c95746257
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_error_report+0x93/0xc0
xfs_trans_cancel+0x2c0/0x350
xfs_growfs_data+0x691/0xe90
xfs_file_ioctl+0x5f9/0x14a0
__x64_sys_ioctl+0x13e/0x1c0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f2d86706577
The bug can be reproduced with the following sequence:
# truncate -s 1073741824 xfs_test.img
# mkfs.xfs -f -b size=1024 -d agcount=4 xfs_test.img
# truncate -s 2305843009213693952 xfs_test.img
# mount -o loop xfs_test.img /mnt/test
# xfs_growfs -D 1125899907891200 /mnt/test
The root cause is that during growfs, user space passed in a large value
of newblcoks to xfs_growfs_data_private(), due to current sb_agblocks is
too small, new AG count will exceed UINT_MAX. Because of AG number type
is unsigned int and it would overflow, that caused nagcount much smaller
than the actual value. During AG extent space, delta blocks in
xfs_resizefs_init_new_ags() will much larger than the actual value due to
incorrect nagcount, even exceed UINT_MAX. This will cause corruption and
be detected in __xfs_free_extent. Fix it by growing the filesystem to up
to the maximally allowed AGs and not return EINVAL when new AG count
overflow.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This patch allows giving each of the controller's pins a meaningful
name.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The iomap-based read operations done by gfs2 for its system files, such
as rindex, may sometimes be interrupted and return -EINTR. This
confuses some users of gfs2_internal_read(). Fix that by retrying
interrupted reads.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There is not a single user in the entire kernel of this deprecated API,
kill it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the missing check for platform_get_irq() and return error code
if it fails.
The returned error code will be dealed with in
builtin_platform_driver(sifive_gpio_driver) and the driver will not
be registered.
Fixes: f52d6d8b43 ("gpio: sifive: To get gpio irq offset from device tree data")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If &encl_mm->encl->mm_list does not contain the searched 'encl_mm',
'tmp' will not point to a valid sgx_encl_mm struct.
Linus proposed to avoid any use of the list iterator variable after the
loop, in the attempt to move the list iterator variable declaration into
the macro to avoid any potential misuse after the loop. Using it in
a pointer comparison after the loop is undefined behavior and should be
omitted if possible, see Link tag.
Instead, just use a 'found' boolean to indicate if an element was found.
[ bp: Massage, fix typos. ]
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Link: https://lore.kernel.org/r/20230206-sgx-use-after-iter-v2-1-736ca621adc3@gmail.com
The way that the timeout is currently calculated could lead to a u64
timeout value in mmci_start_command(). This value is then cast in a u32
register that leads to mmc erase failed issue with some SD cards.
Fixes: 8266c585f4 ("mmc: mmci: add hardware busy timeout feature")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230613134146.418016-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When using dm-verity with a data partition on an emmc device, dm-verity
races with the initialization of the (e)MMC/SD cards. This is because the
card detection procedure is being managed from a workqueue, rather than
synchronously from the mmc host's ->probe() routine.
To allow the card detect to be synchronous, let's simply skip using the
workqueue at the first initialization attempt from mmc_start_host().
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Link: https://lore.kernel.org/r/ZCTOMVjW+pnZVGsQ@snowbird
[Ulf: Re-wrote the commit message to clarify the change]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
All mmc host drivers should have the asynchronous probe option enabled, but
it seems like we failed to set it for mmci, so let's do that now.
Fixes: 21b2cec61c ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230612143730.210390-1-ulf.hansson@linaro.org
The "qcom,paired" schema is all wrong. First, it's a list rather than an
object(dictionary). Second, it is missing a required type. The meta-schema
normally catches this, but schemas under "$defs" was not getting checked.
A fix for that is pending.
Fixes: f9a06b8109 ("dt-bindings: pinctrl: qcom,pmic-mpp: Convert qcom pmic mpp bindings to YAML")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418150606.1528107-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add support for TPS65219 PMICs GPIO interface.
3 GPIO pins:
- GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage.
- GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec.
GPIO0 is statically configured as input or output prior to Linux boot.
it is used for MULTI_DEVICE_ENABLE function.
This setting is statically configured by NVM.
GPIO0 can't be used as a generic GPIO (specification Table 8-34).
It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1.
Datasheet describes specific usage for non standard GPIO.
Datasheet: https://www.ti.com/lit/ds/symlink/tps65219.pdf
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In case of gpio-regmap, IRQ chip is added by regmap-irq and associated with
GPIO chip by gpiochip_irqchip_add_domain(). The initialization flag was not
added in gpiochip_irqchip_add_domain(), causing gpiochip_to_irq() to return
-EPROBE_DEFER.
Fixes: 5467801f1f ("gpio: Restrict usage of GPIO chip irq members before initialization")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some fields such as gt_logd_secs of the struct gfs2_tune are accessed
without holding the lock gt_spin in gfs2_show_options():
val = sdp->sd_tune.gt_logd_secs;
if (val != 30)
seq_printf(s, ",commit=%d", val);
And thus can cause data races when gfs2_show_options() and other functions
such as gfs2_reconfigure() are concurrently executed:
spin_lock(>->gt_spin);
gt->gt_logd_secs = newargs->ar_commit;
To fix these possible data races, the lock sdp->sd_tune.gt_spin is
acquired before accessing the fields of gfs2_tune and released after these
accesses.
Further changes by Andreas:
- Don't hold the spin lock over the seq_printf operations.
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
`_regmap_update_bits()` checks if the current register value differs
from the new value, and only writes to the register if they differ. When
testing hardware drivers, it might be desirable to always force a
register write, for example when writing to a `regmap_field`. This
enables and simplifies testing and verification of the hardware
interaction. For example, when using a hardware mock/simulation model,
one can then more easily verify that the driver makes the correct
expected register writes during certain events.
Add a bool variable `force_write_field` and a corresponding debugfs
entry to enable this. Since this feature could interfere with driver
operation, guard it with a macro.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/pnd1qifa7sj.fsf@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
regcache_maple_sync() tries to sync all cached values no matter
whether it's writable or not. OTOH, regache_sync_val() does care the
wrtability and returns -EIO for a read-only register. This results in
an error message like:
snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x2f0009. -5
and the sync loop is aborted incompletely.
This patch adds the writable register check to regcache_sync_val() for
addressing the bug above.
Note that, although we may add the check in the caller side
(regcache_maple_sync()), here we put in regcache_sync_val(), so that a
similar case like this can be avoided in future.
Fixes: f033c26de5 ("regmap: Add maple tree based register cache")
Link: https://lore.kernel.org/r/877cs7g6f1.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230613112240.3361-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch detected this bug:
arch/arm64/kvm/arch_timer.c:1425 kvm_timer_hyp_init()
warn: missing unwind goto?
There are two resources to be freed the vtimer and ptimer. The
line that Smatch complains about should free the vtimer first
before returning and then after that cleanup code should free
the ptimer.
I've added a out_free_ptimer_irq to free the ptimer and renamed
the existing label to out_free_vtimer_irq.
Fixes: 9e01dc76be ("KVM: arm/arm64: arch_timer: Assign the phys timer on VHE systems")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/72fffc35-7669-40b1-9d14-113c43269cf3@kili.mountain
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
ASoC is now supporting generic trigger ordering method.
This patch switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/87o7lqfnzb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is assuming that trigger starting order is
Link -> Component -> DAI as default, and its reverse order for stopping.
But some Driver / Card want to reorder it for some reasons.
We have such flags, but is unbalance like below.
struct snd_soc_component_driver :: start_dma_last
struct snd_soc_dai_link :: stop_dma_first
We want to have more flexible, and more generic method.
This patch adds new snd_soc_trigger_order for start/stop at
component / DAI-link.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0qmfnzx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The captured data will be combined from each cpu DAI if the dai link
has more than one cpu DAIs. We can set channel number indirectly by
adding sdw_codec_ch_maps.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230607031242.1032060-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, ASoC supports dailinks with the following mappings:
1 cpu DAI to N codec DAIs
N cpu DAIs to N codec DAIs
But the mapping between N cpu DAIs and M codec DAIs is not supported.
The reason is that we didn't have a mechanism to map cpu and codec DAIs
This patch suggests a new snd_soc_dai_link_codec_ch_map struct in
struct snd_soc_dai_link{} which provides codec DAI to cpu DAI mapping
information used to implement N cpu DAIs to M codec DAIs
support.
When a dailink contains two or more cpu DAIs, we should set channel
number of cpus based on its channel mask. The new struct also provides
channel mask information for each codec and we can construct the cpu
channel mask by combining all codec channel masks which map to the cpu.
The N:M mapping is however restricted to the N <= M case due to physical
restrictions on a time-multiplexed bus such as I2S/TDM, AC97, SoundWire
and HDaudio.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230607031242.1032060-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>