Introduce the new helpers, snd_seq_kernel_client_get() and _put() for
kernel client drivers to treat the snd_seq_client more directly.
This allows us to reduce the exported symbols and APIs at each time we
need to access some field in future.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create a new variant of snd_seq_expand_var_event() for expanding the
data starting from the given byte offset. It'll be used by the new
UMP sequencer code later.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There can be a small memory hole that may not be cleared at expanding
an event with the variable length type. Make sure to clear it.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When parsing Group Terminal Blocks, we overwrote the preferred
protocol and the protocol capabilities silently from the last parsed
GTB. This patch adds the information print indicating the unexpected
overrides instead of silent action.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-17-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch extends the UMP core code to support the legacy MIDI 1.0
rawmidi devices. When the new kconfig CONFIG_SND_UMP_LEGACY_RAWMIDI
is set, the UMP core allows to attach an additional rawmidi device for
each UMP Endpoint. The rawmidi device contains 16 substreams where
each substream corresponds to a UMP Group belonging to the EP. The
device reads/writes the legacy MIDI 1.0 byte streams and translates
from/to UMP packets.
The legacy rawmidi devices are exclusive with the UMP rawmidi devices,
hence both of them can't be opened at the same time unless the UMP
rawmidi is opened in APPEND mode.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a code refactoring for abstracting the rawmidi access to the
UMP's own helpers. It's a preliminary work for the later code
refactoring of the UMP layer.
Until now, we access to the rawmidi substream directly from the
driver via rawmidi access helpers, but after this change, the driver
is supposed to access via the newly introduced snd_ump_ops and
receive/transmit via snd_ump_receive() and snd_ump_transmit() helpers.
As of this commit, those are merely wrappers for the rawmidi
substream, and no much function change is seen here.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB MIDI spec defines the Group Terminal Blocks (GTB) that associate
multiple UMP Groups. Those correspond to snd_ump_block entities in
ALSA UMP abstraction, and now we create those UMP Block objects for
each UMP Endpoint from the parsed GTB information.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A single USB audio device may have multiple interfaces for different
purposes (e.g. audio, MIDI and HID), where the iInterface descriptor
of each interface may contain an own suffix, e.g. "MIDI" for a MIDI
interface. as such a suffix is superfluous as a rawmidi and UMP
Endpoint name, this patch trims the superfluous "MIDI" suffix from the
name string.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB descriptor may provide a nicer name for USB interface, and we may
take it as the UMP Endpoint name. The UMP EP name is copied as the
rawmidi name, too.
Also, fill the UMP block product_id field from the iSerialNumber
string of the USB device descriptor as a recommended unique id, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Define new structs and constants from USB MIDI 2.0 specification,
to be used in the upcoming MIDI 2.0 support in USB-audio driver.
A new class-specific endpoint descriptor and group terminal block
descriptors are defined.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We're going to create rawmidi objects for MIDI 2.0 in a different code
from the current code for USB-MIDI 1.0. As a preliminary work, this
patch adds the number of rawmidi objects to keep globally in a
USB-audio card instance, so that it can be referred from both MIDI 1.0
and 2.0 code.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP devices may have more interesting information than the traditional
rawmidi. Extend the rawmidi_global_ops to allow the optional proc
info output and show some more bits in the proc file for UMP.
Note that the "Groups" field shows the first and the last UMP Groups,
and both numbers are 1-based (i.e. the first group is 1).
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It'd be convenient to have ioctls to inquiry the UMP Endpoint and UMP
Block information directly via the control API without opening the
rawmidi interface, just like SNDRV_CTL_IOCTL_RAWMIDI_INFO.
This patch extends the rawmidi ioctl handler to support those; new
ioctls, SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO and
SNDRV_CTL_IOCTL_UMP_BLOCK_INFO, return the snd_ump_endpoint and
snd_ump_block data that is specified by the device field,
respectively.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Applications may look for rawmidi devices with the ioctl
SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE. Returning a UMP device from this
ioctl may confuse the existing applications that support only the
legacy rawmidi.
This patch changes the code to skip the UMP devices from the lookup
for avoiding the confusion, and introduces a new ioctl to look for the
UMP devices instead.
Along with this change, bump the CTL protocol version to 2.0.9.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the support helpers for UMP (Universal MIDI Packet) in
ALSA core.
The basic design is that a rawmidi instance is assigned to each UMP
Endpoint. A UMP Endpoint provides a UMP stream, typically
bidirectional (but can be also uni-directional, too), which may hold
up to 16 UMP Groups, where each UMP (input/output) Group corresponds
to the traditional MIDI I/O Endpoint.
Additionally, the ALSA UMP abstraction provides the multiple UMP
Blocks that can be assigned to each UMP Endpoint. A UMP Block is a
metadata to hold the UMP Group clusters, and can represent the
functions assigned to each UMP Group. A typical implementation of UMP
Block is the Group Terminal Blocks of USB MIDI 2.0 specification.
For distinguishing from the legacy byte-stream MIDI device, a new
device "umpC*D*" will be created, instead of the standard (MIDI 1.0)
devices "midiC*D*". The UMP instance can be identified by the new
rawmidi info bit SNDRV_RAWMIDI_INFO_UMP, too.
A UMP rawmidi device reads/writes only in 4-bytes words alignment,
stored in CPU native endianness.
The transmit and receive functions take care of the input/out data
alignment, and may return zero or aligned size, and the params ioctl
may return -EINVAL when the given input/output buffer size isn't
aligned.
A few new UMP-specific ioctls are added for obtaining the new UMP
endpoint and block information.
As of this commit, no ALSA sequencer instance is attached to UMP
devices yet. They will be supported by later patches.
Along with those changes, the protocol version for rawmidi is bumped
to 2.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A new callback, ioctl, is added to snd_rawmidi_global_ops for allowing
the driver to deal with the own ioctls. This is another preparation
patch for the upcoming UMP support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_rawmidi_kernel_open() is used only internally from ALSA sequencer,
so far, and parsing the card / device matching table at each open is
redundant, as each sequencer client already gets the rawmidi object
beforehand.
This patch optimizes the path by passing the rawmidi object directly
at snd_rawmidi_kernel_open(). This is also a preparation for the
upcoming UMP rawmidi I/O support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding pre-charge actions to make FEPGA power stable faster. It
improve the recording quality at the beginning. Thus, it is also
meaningfully to decrease the final adc delay time.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230523083303.98436-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PAGE_OFFSET is technically a virtual address so when checking the value of
initrd_start against it we should make sure that it has been sanitised from
the values passed by the bootloader. Without this change, even with a bootloader
that passes correct addresses for an initrd, we are failing to load it on MT7621
boards, for example.
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code:
- skip cache invalidation if chip has working coherency circuitry.
- invalidate KSEG0-portion of the (physical) data address.
- force the dma channel doorbell write out to bus immediately with
a sync.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The Au1300, at least the one I have to test, uses the NetLogic vendor
ID, but commit 95b8a5e011 ("MIPS: Remove NETLOGIC support") also
dropped Au1300 detection. Restore Au1300 detection.
Tested on DB1300 with Au1380 chip.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Alchemy DB1200/DB1300 boards can use the pata_platform driver.
Unhide the config entry in all of MIPS.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
As Sandeep shown [1], high priority RT per-cpu kthreads are
typically helpful for Android scenarios to minimize the scheduling
latencies.
Switch EROFS_FS_PCPU_KTHREAD_HIPRI on by default if
EROFS_FS_PCPU_KTHREAD is on since it's the typical use cases for
EROFS_FS_PCPU_KTHREAD.
Also clean up unneeded sched_set_normal().
[1] https://lore.kernel.org/r/CAB=BE-SBtO6vcoyLNA9F-9VaN5R0t3o_Zn+FW8GbO6wyUqFneQ@mail.gmail.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230522092141.124290-1-hsiangkao@linux.alibaba.com
The function of pcpubuf.c is just for low-latency decompression
algorithms (e.g. lz4).
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230515095758.10391-1-zbestahu@gmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Add a node for the on-board I2S audio controller.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 2a31bf2080 ("watchdog: loongson1_wdt: Implement restart handler")
implmented .restart ops, Then, _machine_restart is no longer needed.
The _machine_halt and pm_power_off are also unnecessary,
which contain no hardware operations.
Therefore, remove the entire reset.c and related header file.
Update the Makefile accordingly.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Page pool for each rx queue enhance rx side performance
by reclaiming buffers back to each queue specific pool. DMA
mapping is done only for first allocation of buffers.
As subsequent buffers allocation avoid DMA mapping,
it results in performance improvement.
Image | Performance
------------ | ------------
Vannila | 3Mpps
|
with this | 42Mpps
change |
---------------------------
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://lore.kernel.org/r/20230522020404.152020-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In fact the device with chip id 0xD283 is called NCT6126D, and that is
the chip id the Nuvoton code was written for. Correct that name to avoid
confusion, because a NCT6116D in fact exists as well but has another
chip id, and is currently not supported.
The look at the spec also revealed that GPIO group7 in fact has 8 pins,
so correct the pin count in that group as well.
Fixes: d0918a84af ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116")
Reported-by: Xing Tong Wu <xingtong.wu@siemens.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The "ext" and "pll half" clocks don't belong in the DT. They are
not consumed directly by the AIC and are only used as the parent
clocks of the "i2s" clock. An operating system should be able to
figure out that information itself because it presumably knows the
layout of the clock tree.
Removing these from the DT should be safe from a compatibility
point of view because the jz4740-i2s driver in Linux does not, and
never did depend on them.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/all/20221028103418.17578-1-aidanmacdonald.0x0@gmail.com/
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Utilize a temporary variable to calculate number of ctx from ngpio
inside ->probe() implementation.
While at it, include math.h for using DIV_ROUND_UP().
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The design is to keep Buffer Object's caching policy immutable through
out its life cycle. This patch ends the support for set caching ioctl
from MTL onward. While doing that we also set BO's to be 1-way coherent
at creation time because GPU is no longer automatically snooping CPU
cache. For userspace components needing to fine tune the caching policy
for BO's, a follow up patch will extend the GEM_CREATE uAPI to allow
them specify caching mode at BO creation time.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519051103.3404990-2-fei.yang@intel.com
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After commit b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing
PEBS_DATA_CFG"), the cpuc->pebs_data_cfg may save some bits that are not
supported by real hardware, such as PEBS_UPDATE_DS_SW. This would cause
the VMX hardware MSR switching mechanism to save/restore invalid values
for PEBS_DATA_CFG MSR, thus crashing the host when PEBS is used for guest.
Fix it by using the active host value from cpuc->active_pebs_data_cfg.
Fixes: b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230517133808.67885-1-likexu@tencent.com
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The model property should be at the top level, let's move it out
of the pinctrl node.
Fixes: d2eaf949d2 ("ARM: dts: omap3-gta04a5one: define GTA04A5 variant with OneNAND")
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As per the RZ/G2L HW(Rev.1.30 May2023) manual, there are no "write enable"
bits in the CPG_SIPLL5_CLK1 register. So fix the CPG_SIPLL5_CLK register
write by removing the "write enable" bits.
Fixes: 1561380ee7 ("clk: renesas: rzg2l: Add FOUTPOSTDIV clk support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230518152334.514922-1-biju.das.jz@bp.renesas.com
[geert: Remove CPG_SIPLL5_CLK1_*_WEN bit definitions]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
IOMMU v2 page table supports 4 level (47 bit) or 5 level (56 bit) virtual
address space. Current code assumes it can support 64bit IOVA address
space. If IOVA allocator allocates virtual address > 47/56 bit (depending
on page table level) then it will do wrong mapping and cause invalid
translation.
Hence adjust aperture size to use max address supported by the page table.
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: aaac38f614 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Cc: <Stable@vger.kernel.org> # v6.0+
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230518054351.9626-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>