When map() is called on a detached domain, the domain does not exist in
the device so we do not send a MAP request, but we do update the
internal mapping tree, to be replayed on the next attach. Since this
constitutes a successful iommu_map() call, return *mapped in this case
too.
Fixes: 7e62edd7a3 ("iommu/virtio: Add map/unmap_pages() callbacks implementation")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230515113946.1017624-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use a normal "goto unwind" instead of trying to be clever with checking
!ret and manually managing the unlock.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/17-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The last two users of it are quite trivial, just open code the one line
loop.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/16-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For now several ARM drivers do not allow mappings to be created until a
domain is attached. This means they do not technically support
IOMMU_RESV_DIRECT as it requires the 1:1 maps to work continuously.
Currently if the platform requests these maps on ARM systems they are
silently ignored.
Work around this by trying again to establish the direct mappings after
the domain is attached if the pre-attach attempt failed.
In the long run the drivers will be fixed to fully setup domains when they
are created without waiting for attachment.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/15-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make iommu_change_dev_def_domain() general enough to setup the initial
default_domain or replace it with a new default_domain. Call the new
function iommu_setup_default_domain() and make it the only place in the
code that stores to group->default_domain.
Consolidate the three copies of the default_domain setup sequence. The flow
flow requires:
- Determining the domain type to use
- Checking if the current default domain is the same type
- Allocating a domain
- Doing iommu_create_device_direct_mappings()
- Attaching it to devices
- Store group->default_domain
This adjusts the domain allocation from the prior patch to be able to
detect if each of the allocation steps is already the domain we already
have, which is a more robust version of what change default domain was
already doing.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Robin points out that the fallback to guessing what domains the driver
supports should only happen if the driver doesn't return a preference from
its ops->def_domain_type().
Re-organize iommu_group_alloc_default_domain() so it internally uses
iommu_def_domain_type only during the fallback and makes it clearer how
the fallback sequence works.
Make iommu_group_alloc_default_domain() return the domain so the return
based logic is cleaner and to prepare for the next patch.
Remove the iommu_alloc_default_domain() function as it is now trivially
just calling iommu_group_alloc_default_domain().
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Put all the code to calculate the default domain type into one
function. Make the function able to handle the
iommu_change_dev_def_domain() by taking in the target domain type and
erroring out if the target type isn't reachable.
This makes it really clear that specifying a 0 type during
iommu_change_dev_def_domain() will have the same outcome as the normal
probe path.
Remove the obfuscating use of __iommu_group_for_each_dev() and related
struct __group_domain_type.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
group->domain should only be set once all the device's drivers have
had their ops->attach_dev() called. iommu_group_alloc_default_domain()
doesn't do this, so it shouldn't set the value.
The previous patches organized things so that each caller of
iommu_group_alloc_default_domain() follows up with calling
__iommu_group_set_domain_internal() that does set the group->domain.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_probe_device() path calls iommu_create_device_direct_mappings()
after attaching the device.
IOMMU_RESV_DIRECT maps need to be continually in place, so if a hotplugged
device has new ranges the should have been mapped into the default domain
before it is attached.
Move the iommu_create_device_direct_mappings() call up.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The general invariant is that all devices in an iommu_group are attached
to group->domain. We missed some cases here where an owned group would not
get the device attached.
Rework this logic so it follows the default domain flow of the
bus_iommu_probe() - call iommu_alloc_default_domain(), then use
__iommu_group_set_domain_internal() to set up all the devices.
Finally always attach the device to the current domain if it is already
set.
This is an unlikely functional issue as iommufd uses iommu_attach_group().
It is possible to hot plug in a new group member, add a vfio driver to it
and then hot add it to an existing iommufd. In this case it is required
that the core code set the iommu_domain properly since iommufd won't call
iommu_attach_group() again.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since __iommu_device_set_domain() now knows how to handle deferred attach
we can just call it directly from the only call site.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This function is only used to construct the groups, it should not be
operating the iommu driver.
External callers in VFIO and POWER do not have any iommu drivers on the
devices so group->domain will be NULL.
The only internal caller is from iommu_probe_device() which already calls
iommu_group_do_dma_first_attach(), meaning we are calling it twice in the
only case it matters.
Since iommu_probe_device() is the logical place to sort out the group's
domain, remove the call from iommu_group_add_device().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reorganize the attach_deferred logic to set dev->iommu->attach_deferred
immediately during probe and then have __iommu_device_set_domain() check
it and not attach the default_domain.
This is to prepare for removing the group->domain set from
iommu_group_alloc_default_domain() by calling __iommu_group_set_domain()
to set the group->domain.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is missing re-attach error handling if the attach fails, use the
common code.
The ugly "group->domain = prev_domain" will be cleaned in a later patch.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The error recovery here matches the recovery inside
__iommu_group_set_domain(), so just use it directly.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Let's try to have a consistent and clear strategy for error handling
during domain attach failures.
There are two broad categories, the first is callers doing destruction and
trying to set the domain back to a previously good domain. These cases
cannot handle failure during destruction flows and must succeed, or at
least avoid a UAF on the current group->domain which is likely about to be
freed.
Many of the drivers are well behaved here and will not hit the WARN_ON's
or a UAF, but some are doing hypercalls/etc that can fail unpredictably
and don't meet the expectations.
The second case is attaching a domain for the first time in a failable
context, failure should restore the attachment back to group->domain using
the above unfailable operation.
Have __iommu_group_set_domain_internal() execute a common algorithm that
tries to achieve this, and in the worst case, would leave a device
"detached" or assigned to a global blocking domain. This relies on some
existing common driver behaviors where attach failure will also do detatch
and true IOMMU_DOMAIN_BLOCK implementations that are not allowed to ever
fail.
Name the first case with __iommu_group_set_domain_nofail() to make it
clear.
Pull all the error handling and WARN_ON generation into
__iommu_group_set_domain_internal().
Avoid the obfuscating use of __iommu_group_for_each_dev() and be more
careful about what should happen during failures by only touching devices
we've already touched.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convenience macro to iterate over every struct group_device in the group.
Replace all open coded list_for_each_entry's with this macro.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No reason to wrapper a standard function, just call the library directly.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After the cited patch, mlx5_irq xarray index can be different then
mlx5_irq MSIX table index.
Fix it by storing both mlx5_irq xarray index and MSIX table index.
Fixes: 3354822cde ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited patch deny the user of changing the affinity of mlx5 irqs,
which break backward compatibility.
Hence, allow the user to change the affinity of mlx5 irqs.
Fixes: bbac70c741 ("net/mlx5: Use newer affinity descriptor")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
From one hand, mlx5 driver is allowing to probe PFs in parallel.
From the other hand, devcom, which is a share resource between PFs, is
registered without any lock. This might resulted in memory problems.
Hence, use the global mlx5_dev_list_lock in order to serialize devcom
registration.
Fixes: fadd59fc50 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case devcom allocation is failed, mlx5 is always freeing the priv.
However, this priv might have been allocated by a different thread,
and freeing it might lead to use-after-free bugs.
Fix it by freeing the priv only in case it was allocated by the
running thread.
Fixes: fadd59fc50 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
devcom events are sent to all registered component. Following the
cited patch, it is possible for two components, e.g.: two eswitches,
to send devcom events, while both components are registered. This
means eswitch layer will do double un/pairing, which is double
allocation and free of resources, even though only one un/pairing is
needed. flow example:
cpu0 cpu1
---- ----
mlx5_devlink_eswitch_mode_set(dev0)
esw_offloads_devcom_init()
mlx5_devcom_register_component(esw0)
mlx5_devlink_eswitch_mode_set(dev1)
esw_offloads_devcom_init()
mlx5_devcom_register_component(esw1)
mlx5_devcom_send_event()
mlx5_devcom_send_event()
Hence, check whether the eswitches are already un/paired before
free/allocation of resources.
Fixes: 09b278462f ("net: devlink: enable parallel ops on netlink interface")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken
up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb
fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up.
Fixes: 1880bc4e4a ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix spacing for the error and also the correct error code pointer.
Fixes: c9b9dcb430 ("net/mlx5: Move device memory management to mlx5_core")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
With introduction of post action infrastructure most of the users of encap
attribute had been modified in order to obtain the correct attribute by
calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action
is always on default attribute. However, the cited commit didn't modify
mlx5e_invalidate_encap() which prevents it from destroying correct modify
header action which leads to a warning [0]. Fix the issue by using correct
attribute.
[0]:
Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace:
Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK>
Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230
Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90
Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0
Fixes: 8300f22526 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.
Fixes: 7304d603a5 ("net/mlx5: DR, Add support for force-loopback QP")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When calculating crc for hash index we use the function crc32 that
calculates for little-endian (LE) arch.
Then we convert it to network endianness using htonl(), but it's wrong
to do the conversion in BE archs since the crc32 value is already LE.
The solution is to switch the bytes from the crc result for all types
of arc.
Fixes: 40416d8ede ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case user switch a device from switchdev mode to legacy mode, mlx5
first unpair the E-switch and afterwards unload the uplink vport.
From the other hand, in case user remove or reload a device, mlx5
first unload the uplink vport and afterwards unpair the E-switch.
The latter is causing a bug[1], hence, handle pairing of E-switch as
part of uplink un/load APIs.
[1]
In case VF_LAG is used, every tc fdb flow is duplicated to the peer
esw. However, the original esw keeps a pointer to this duplicated
flow, not the peer esw.
e.g.: if user create tc fdb flow over esw0, the flow is duplicated
over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated
flow.
During module unload while a peer tc fdb flow is still offloaded, in
case the first device to be removed is the peer device (esw1 in the
example above), the peer net-dev is destroyed, and so the mlx5e_priv
is memset to 0.
Afterwards, the peer device is trying to unpair himself from the
original device (esw0 in the example above). Unpair API invoke the
original device to clear peer flow from its eswitch (esw0), but the
peer flow, which is stored over the original eswitch (esw0), is
trying to use the peer mlx5e_priv, which is memset to 0 and result in
bellow kernel-oops.
[ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60
[ 157.964662 ] #PF: supervisor read access in kernel mode
[ 157.965123 ] #PF: error_code(0x0000) - not-present page
[ 157.965582 ] PGD 0 P4D 0
[ 157.965866 ] Oops: 0000 [#1] SMP
[ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core]
[ 157.976164 ] Call Trace:
[ 157.976437 ] <TASK>
[ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core]
[ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core]
[ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core]
[ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core]
[ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core]
[ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core]
[ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core]
[ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core]
[ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core]
[ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core]
[ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core]
[ 157.988549 ] pci_device_remove+0x31/0xa0
[ 157.988933 ] device_release_driver_internal+0x18f/0x1f0
[ 157.989402 ] driver_detach+0x3f/0x80
[ 157.989754 ] bus_remove_driver+0x70/0xf0
[ 157.990129 ] pci_unregister_driver+0x34/0x90
[ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core]
[ 157.990972 ] __x64_sys_delete_module+0x15a/0x250
[ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110
[ 157.991840 ] do_syscall_64+0x3d/0x90
[ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 04de7dda73 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Fixes: 1418ddd96a ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
DEVX can issue a general command, which is not used by mlx5 driver.
In case such command is failed, mlx5 is trying to collect the failure
data, However, mlx5 doesn't create a storage for this command, since
mlx5 doesn't use it. This lead to array-index-out-of-bounds error.
Fix it by checking whether the command is known before collecting the
failure data.
Fixes: 34f46ae0d4 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Following the CRD, connect the two QMP phys inbetween the USB Type-C
connectors and the DisplayPort controller, to handle orientation
switching.
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@kernel.org> # X13s
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515032743.400170-9-quic_bjorande@quicinc.com
With support for the QMP combo phy to react to USB Type-C switch events,
introduce it as the next hop for the SuperSpeed lanes of the two USB
Type-C connectors, and connect the output of the DisplayPort controller
to the QMP combo phy.
This allows the TCPM to perform orientation switching of both USB and
DisplayPort signals.
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@kernel.org> # X13s
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515032743.400170-8-quic_bjorande@quicinc.com
The "handshake_req_alloc excessive privsize" kunit test is intended
to check what happens when the maximum privsize is exceeded. The
WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for
this test.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 88232ec1ec ("net/handshake: Add Kunit tests for the handshake consumer API")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/168451636052.47152.9600443326570457947.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an error occures after calling nv_mgmt_acquire_sema(), it should be
undone with a corresponding nv_mgmt_release_sema() call.
Add it in the error handling path of the probe as already done in the
remove function.
Fixes: cac1c52c36 ("forcedeth: mgmt unit interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 misc changes and code clean up:
The following series contains general changes for improving
E-Switch driver behavior.
1) improving condition checking
2) Code clean up
3) Using metadata matching on send-to-vport rules.
4) Using RoCE v2 instead of v1 for loopback rules.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmRntucACgkQSD+KveBX
+j4Bigf+O2dpTClTifJ/5PbUi+dGuC7wEZcgwi75BZnoQVirxj8yizaPMgBb+daw
nW9YGV820eDB51ES7kiz6i9pYRO/LApbXGKvPmNaQw5OHqF7oQqT/dY4RJz2gyBN
QnTbZ8R8quG8KXa7ftt58ZeNAUxaPe+XxYR/TmSYl6IDUNtqy0pSu3llx2jxQfZS
ZUp5Vnd2wRwfIsOhI29eGZAzN0ND8NehdCw3tiH3nAcUP9Jv+W4KgYFJj9mkAjbv
m4f4R3orbMN+4eExeaHygDY2wJ+75YP3hAhA4Wdbm3RfLf3yCMVAIDFomaCnypXd
ZNeVaijnOrePqJ81nOjRizKJd+vc5Q==
=YKxP
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-05-19
mlx5 misc changes and code clean up:
The following series contains general changes for improving
E-Switch driver behavior.
1) improving condition checking
2) Code clean up
3) Using metadata matching on send-to-vport rules.
4) Using RoCE v2 instead of v1 for loopback rules.
* tag 'mlx5-updates-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: E-Switch, Initialize E-Switch for eswitch manager
net/mlx5: devlink, Only show PF related devlink warning when needed
net/mlx5: E-Switch, Use metadata matching for RoCE loopback rule
net/mlx5: E-Switch, Use RoCE version 2 for loopback traffic
net/mlx5e: E-Switch, Add a check that log_max_l2_table is valid
net/mlx5e: E-Switch: move debug print of adding mac to correct place
net/mlx5e: E-Switch, Check device is PF when stopping esw offloads
net/mlx5: Remove redundant vport_group_manager cap check
net/mlx5e: E-Switch, Use metadata for vport matching in send-to-vport rules
net/mlx5e: E-Switch, Allow get vport api if esw exists
net/mlx5e: E-Switch, Update when to set other vport context
net/mlx5e: Remove redundant __func__ arg from fs_err() calls
net/mlx5e: E-Switch, Remove flow_source check for metadata matching
net/mlx5: E-Switch, Remove redundant check
net/mlx5: Remove redundant esw multiport validate function
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230519175557.15683-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have been requiring the supported_interfaces bitmap to be filled in
by MAC drivers that have a mac_select_pcs() method. Now that all MAC
drivers fill in the supported_interfaces bitmap, it is time to enforce
this. We have already required supported_interfaces to be set in order
for optical SFPs to be configured in commit f81fa96d8a ("net: phylink:
use phy_interface_t bitmaps for optical modules").
Refuse phylink creation if supported_interfaces is empty, and remove
code to deal with cases where this mask is empty.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1q0K1u-006EIP-ET@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the Fiberstore SFP-10G-T and Walsun HXSX-ATRC-1
modules. Internally, the PCB silkscreen has what seems to be a part
number of WT_502. Fiberstore use v2.2 whereas Walsun use v2.6.
These modules contain a Marvell AQrate AQR113C PHY, accessible through
I2C 0x51 using the "rollball" protocol. In both cases, the PHY is
programmed to use 10GBASE-R with pause-mode rate adaption.
Unlike the other rollball modules, these only need a four second delay
before we can talk to the PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1q0JfS-006Dqc-8t@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hostdata->work_q only hosts a single work item, hostdata->main_task, and
thus doesn't need explicit concurrency limit. Let's use the default
@max_active. This doesn't cost anything and clearly expresses that
@max_active doesn't matter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The Linux kernel is notorious for misspelling X-Box, X-box, XBox or XBOX;
the official spelling is actually just Xbox. Plain and simple.
Tried to respect the existing notes but still following the style guide.
No functional changes intended. This only affects ancillary parts.
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Link: https://lore.kernel.org/r/401b1d94-1348-15fd-b48f-a80e8885c7a4@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A successful call to cgroup_css_set_fork() will always have taken
a ref on kargs->cset (regardless of CLONE_INTO_CGROUP), so always
do a corresponding put in cgroup_css_set_put_fork().
Without this, a cset and its contained css structures will be
leaked for some fork failures. The following script reproduces
the leak for a fork failure due to exceeding pids.max in the
pids controller. A similar thing can happen if we jump to the
bad_fork_cancel_cgroup label in copy_process().
[ -z "$1" ] && echo "Usage $0 pids-root" && exit 1
PID_ROOT=$1
CGROUP=$PID_ROOT/foo
[ -e $CGROUP ] && rmdir -f $CGROUP
mkdir $CGROUP
echo 5 > $CGROUP/pids.max
echo $$ > $CGROUP/cgroup.procs
fork_bomb()
{
set -e
for i in $(seq 10); do
/bin/sleep 3600 &
done
}
(fork_bomb) &
wait
echo $$ > $PID_ROOT/cgroup.procs
kill $(cat $CGROUP/cgroup.procs)
rmdir $CGROUP
Fixes: ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TZgh
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Dave Hansen:
"This works around and issue where the INVLPG instruction may miss
invalidating kernel TLB entries in recent hybrid CPUs.
I do expect an eventual microcode fix for this. When the microcode
version numbers are known, we can circle back around and add them the
model table to disable this workaround"
* tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Avoid incomplete Global INVLPG flushes
Make the chapter heading concise yet still descriptive.
This makes the subsystem table of contents more readable (IMO).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230518212749.18266-12-rdunlap@infradead.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>