commit bdf3f41760 upstream.
TCR2_ELx.E0POE is set during smp_init().
However, this bit is not reprogrammed when the CPU enters suspension and
later resumes via cpu_resume(), as __cpu_setup() does not re-enable E0POE
and there is no save/restore logic for the TCR2_ELx system register.
As a result, the E0POE feature no longer works after cpu_resume().
To address this, save and restore TCR2_EL1 in the cpu_suspend()/cpu_resume()
path, rather than adding related logic to __cpu_setup(), taking into account
possible future extensions of the TCR2_ELx feature.
Fixes: bf83dae90f ("arm64: enable the Permission Overlay Extension for EL0")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4e305ed60 upstream.
pdev can be null and free_ring: can be called in 1297 with a null
pdev.
Fixes: 55c82617c3 ("3c59x: convert to generic DMA API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260106094731.25819-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d984b0574 upstream.
The size of the buffer is not the same when alloc'd with
dma_alloc_coherent() in he_init_tpdrq() and freed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260107090141.80900-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6c209ceb8 upstream.
I haven't found an NFSERR_EAGAIN in RFCs 1094, 1813, 7530, or 8881.
None of these RFCs have an NFS status code that match the numeric
value "11".
Based on the meaning of the EAGAIN errno, I presume the use of this
status in NFSD means NFS4ERR_DELAY. So replace the one usage of
nfserr_eagain, and remove it from NFSD's NFS status conversion
tables.
As far as I can tell, NFSERR_EAGAIN has existed since the pre-git
era, but was not actually used by any code until commit f4e44b3933
("NFSD: delay unmount source's export after inter-server copy
completed."), at which time it become possible for NFSD to return
a status code of 11 (which is not valid NFS protocol).
Fixes: f4e44b3933 ("NFSD: delay unmount source's export after inter-server copy completed.")
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b88bfa42e upstream.
When the NFSD instance doesn't to startup, the net ref data memory is
not properly reclaimed, which triggers the memory leak issue reported
by syzbot [1].
To avoid the problem reported in [1], the net ref data memory reclamation
action is moved outside of nfsd_net_up when the net is shutdown.
[1]
unreferenced object 0xffff88812a39dfc0 (size 64):
backtrace (crc a2262fc6):
percpu_ref_init+0x94/0x1e0 lib/percpu-refcount.c:76
nfsd_create_serv+0xbe/0x260 fs/nfsd/nfssvc.c:605
nfsd_nl_listener_set_doit+0x62/0xb00 fs/nfsd/nfsctl.c:1882
genl_family_rcv_msg_doit+0x11e/0x190 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x2fd/0x440 net/netlink/genetlink.c:1210
BUG: memory leak
Reported-by: syzbot+6ee3b889bdeada0a6226@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6ee3b889bdeada0a6226
Fixes: 39972494e3 ("nfsd: update percpu_ref to manage references on nfsd_net")
Cc: stable@vger.kernel.org
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0424066fc upstream.
If we are trying to unlock the filesystem via an administrative
interface and nfsd isn't running, it crashes the server. This
happens currently because nfsd4_revoke_states() access state
structures (eg., conf_id_hashtbl) that has been freed as a part
of the server shutdown.
[ 59.465072] Call trace:
[ 59.465308] nfsd4_revoke_states+0x1b4/0x898 [nfsd] (P)
[ 59.465830] write_unlock_fs+0x258/0x440 [nfsd]
[ 59.466278] nfsctl_transaction_write+0xb0/0x120 [nfsd]
[ 59.466780] vfs_write+0x1f0/0x938
[ 59.467088] ksys_write+0xfc/0x1f8
[ 59.467395] __arm64_sys_write+0x74/0xb8
[ 59.467746] invoke_syscall.constprop.0+0xdc/0x1e8
[ 59.468177] do_el0_svc+0x154/0x1d8
[ 59.468489] el0_svc+0x40/0xe0
[ 59.468767] el0t_64_sync_handler+0xa0/0xe8
[ 59.469138] el0t_64_sync+0x1ac/0x1b0
Ensure this can't happen by taking the nfsd_mutex and checking that
the server is still up, and then holding the mutex across the call to
nfsd4_revoke_states().
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 1ac3629bf0 ("nfsd: prepare for supporting admin-revocation of state")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb321998de upstream.
The loop in nfsd4_revoke_states() stops one too early because
the end value given is CLIENT_HASH_MASK where it should be
CLIENT_HASH_SIZE.
This means that an admin request to drop all locks for a filesystem will
miss locks held by clients which hash to the maximum possible hash value.
Fixes: 1ac3629bf0 ("nfsd: prepare for supporting admin-revocation of state")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2857bd59fe upstream.
Writing to v4_end_grace can race with server shutdown and result in
memory being accessed after it was freed - reclaim_str_hashtbl in
particularly.
We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is
held while client_tracking_op->init() is called and that can wait for
an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a
deadlock.
nfsd4_end_grace() is also called by the landromat work queue and this
doesn't require locking as server shutdown will stop the work and wait
for it before freeing anything that nfsd4_end_grace() might access.
However, we must be sure that writing to v4_end_grace doesn't restart
the work item after shutdown has already waited for it. For this we
add a new flag protected with nn->client_lock. It is set only while it
is safe to make client tracking calls, and v4_end_grace only schedules
work while the flag is set with the spinlock held.
So this patch adds a nfsd_net field "client_tracking_active" which is
set as described. Another field "grace_end_forced", is set when
v4_end_grace is written. After this is set, and providing
client_tracking_active is set, the laundromat is scheduled.
This "grace_end_forced" field bypasses other checks for whether the
grace period has finished.
This resolves a race which can result in use-after-free.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Closes: https://lore.kernel.org/linux-nfs/20250623030015.2353515-1-neil@brown.name/T/#t
Fixes: 7f5ef2e900 ("nfsd: add a v4_end_grace file to /proc/fs/nfsd")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neil@brown.name>
Tested-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e901c7fce5 upstream.
Commit abc02e5602 ("NFSD: Support write delegations in LAYOUTGET")
added NFSD_MAY_OWNER_OVERRIDE to the access flags passed from
nfsd4_layoutget() to fh_verify(). This causes LAYOUTGET to fail for
executable-only files, and causes xfstests generic/126 to fail on
pNFS SCSI.
To allow read access to executable-only files, what we really want is:
1. The "permissions" portion of the access flags (the lower 6 bits)
must be exactly NFSD_MAY_READ
2. The "hints" portion of the access flags (the upper 26 bits) can
contain any combination of NFSD_MAY_OWNER_OVERRIDE and
NFSD_MAY_READ_IF_EXEC
Fixes: abc02e5602 ("NFSD: Support write delegations in LAYOUTGET")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260109112133.973195406@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Slade Watkins <sr@sladewatkins.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3344716dde which is
commit 9be15fbfc6 upstream.
This causes problems in older kernel trees as SNP host kdump is not
supported in them, so drop it from the stable branches.
Reported-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/dacdff7f-0606-4ed5-b056-2de564404d51@amd.com
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Sairaj Kodilkar <sarunkod@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7346e7a058 ("pwm: stm32: Always do lazy disabling") triggered a
regression where PWM polarity changes could be ignored.
stm32_pwm_set_polarity() was skipped due to a mismatch between the
cached pwm->state.polarity and the actual hardware state, leaving the
hardware polarity unchanged.
Fixes: 7edf736920 ("pwm: Add driver for STM32 plaftorm")
Cc: stable@vger.kernel.org # <= 6.12
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Co-developed-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
commit 5326ab737a upstream.
According to section 5.3.6.2 (Multiport Device Operation) of the virtio
spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE
is followed by a virtio_console_resize struct containing cols then rows.
The kernel implements this the wrong way around (rows then cols) resulting
in the two values being swapped.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed3ba9b6e2 upstream.
SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to
br_ioctl_call(), which causes unnecessary RTNL dance and the splat
below [0] under RTNL pressure.
Let's say Thread A is trying to detach a device from a bridge and
Thread B is trying to remove the bridge.
In dev_ioctl(), Thread A bumps the bridge device's refcnt by
netdev_hold() and releases RTNL because the following br_ioctl_call()
also re-acquires RTNL.
In the race window, Thread B could acquire RTNL and try to remove
the bridge device. Then, rtnl_unlock() by Thread B will release RTNL
and wait for netdev_put() by Thread A.
Thread A, however, must hold RTNL after the unlock in dev_ifsioc(),
which may take long under RTNL pressure, resulting in the splat by
Thread B.
Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR)
---------------------- ----------------------
sock_ioctl sock_ioctl
`- sock_do_ioctl `- br_ioctl_call
`- dev_ioctl `- br_ioctl_stub
|- rtnl_lock |
|- dev_ifsioc '
' |- dev = __dev_get_by_name(...)
|- netdev_hold(dev, ...) .
/ |- rtnl_unlock ------. |
| |- br_ioctl_call `---> |- rtnl_lock
Race | | `- br_ioctl_stub |- br_del_bridge
Window | | | |- dev = __dev_get_by_name(...)
| | | May take long | `- br_dev_delete(dev, ...)
| | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...)
| | | | `- rtnl_unlock
\ | |- rtnl_lock <-' `- netdev_run_todo
| |- ... `- netdev_run_todo
| `- rtnl_unlock |- __rtnl_unlock
| |- netdev_wait_allrefs_any
|- netdev_put(dev, ...) <----------------'
Wait refcnt decrement
and log splat below
To avoid blocking SIOCBRDELBR unnecessarily, let's not call
dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF.
In the dev_ioctl() path, we do the following:
1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl()
2. Check CAP_NET_ADMIN in dev_ioctl()
3. Call dev_load() in dev_ioctl()
4. Fetch the master dev from ifr.ifr_name in dev_ifsioc()
3. can be done by request_module() in br_ioctl_call(), so we move
1., 2., and 4. to br_ioctl_stub().
Note that 2. is also checked later in add_del_if(), but it's better
performed before RTNL.
SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since
the pre-git era, and there seems to be no specific reason to process
them there.
[0]:
unregister_netdevice: waiting for wpan3 to become free. Usage count = 2
ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4282 [inline]
netdev_hold include/linux/netdevice.h:4311 [inline]
dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624
dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826
sock_do_ioctl+0x1ca/0x260 net/socket.c:1213
sock_ioctl+0x23a/0x6c0 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 893b195875 ("net: bridge: fix ioctl locking")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[cascardo: fixed conflict at dev_ifsioc]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b747cc628 ]
Commit ac4e04d9e3 ("cpufreq: intel_pstate: Unchecked MSR aceess in
legacy mode") introduced a check for feature X86_FEATURE_IDA to verify
turbo mode support. Although this is the correct way to check for turbo
mode support, it causes issues on some platforms that disable turbo
during OS boot, but enable it later [1]. Before adding this feature
check, users were able to get turbo mode frequencies by writing 0 to
/sys/devices/system/cpu/intel_pstate/no_turbo post-boot.
To restore the old behavior on the affected systems while still
addressing the unchecked MSR issue on some Skylake-X systems, check
X86_FEATURE_IDA only immediately before updates of MSR_IA32_PERF_CTL
that may involve setting the Turbo Engage Bit (bit 32).
Fixes: ac4e04d9e3 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2122531 [1]
Tested-by: Aaron Rainbolt <arainbolt@kfocus.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251111010840.141490-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ richa: Backport to 6.12.y with context adjustments ]
Signed-off-by: Richa Bharti <richa.bharti@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8defb4f081 ]
Otherwise userspace may be fooled into believing it has a reserved VMID
when in reality it doesn't, ultimately leading to GPU hangs when SPM is
used.
Fixes: 80e709ee6e ("drm/amdgpu: add option params to enforce process isolation between graphics and compute")
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ adapted 3-argument amdgpu_vmid_alloc_reserved(adev, vm, vmhub) call to 2-argument version and added separate error check to preserve reserved_vmid tracking logic. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e5a541420 ]
When nvmem_cell_read() fails in mt798x_phy_calibration(), the function
returns without calling nvmem_cell_put(), leaking the cell reference.
Move nvmem_cell_put() right after nvmem_cell_read() to ensure the cell
reference is always released regardless of the read result.
Found via static analysis and code review.
Fixes: 98c485eaf5 ("net: phy: add driver for MediaTek SoC built-in GE PHYs")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251211081313.2368460-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 193d18f605 ]
Beacon frames are required to be sent to the broadcast address, see IEEE
Std 802.11-2020, 11.1.3.1 ("The Address 1 field of the Beacon .. frame
shall be set to the broadcast address"). A unicast Beacon frame might be
used as a targeted attack to get one of the associated STAs to do
something (e.g., using CSA to move it to another channel). As such, it
is better have strict filtering for this on the received side and
discard all Beacon frames that are sent to an unexpected address.
This is even more important for cases where beacon protection is used.
The current implementation in mac80211 is correctly discarding unicast
Beacon frames if the Protected Frame bit in the Frame Control field is
set to 0. However, if that bit is set to 1, the logic used for checking
for configured BIGTK(s) does not actually work. If the driver does not
have logic for dropping unicast Beacon frames with Protected Frame bit
1, these frames would be accepted in mac80211 processing as valid Beacon
frames even though they are not protected. This would allow beacon
protection to be bypassed. While the logic for checking beacon
protection could be extended to cover this corner case, a more generic
check for discard all Beacon frames based on A1=unicast address covers
this without needing additional changes.
Address all these issues by dropping received Beacon frames if they are
sent to a non-broadcast address.
Cc: stable@vger.kernel.org
Fixes: af2d14b01c ("mac80211: Beacon protection using the new BIGTK (STA)")
Signed-off-by: Jouni Malinen <jouni.malinen@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215151134.104501-1-jouni.malinen@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ changed RX_DROP to RX_DROP_MONITOR ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f183663901 ]
Currently, folio_expected_ref_count() only adds references for the swap
cache if the folio is anonymous. However, according to the comment above
the definition of PG_swapcache in enum pageflags, shmem folios can also
have PG_swapcache set. This patch makes sure references for the swap
cache are added if folio_test_swapcache(folio) is true.
This issue was found when trying to hot-unplug memory in a QEMU/KVM
virtual machine. When initiating hot-unplug when most of the guest memory
is allocated, hot-unplug hangs partway through removal due to migration
failures. The following message would be printed several times, and would
be printed again about every five seconds:
[ 49.641309] migrating pfn b12f25 failed ret:7
[ 49.641310] page: refcount:2 mapcount:0 mapping:0000000033bd8fe2 index:0x7f404d925 pfn:0xb12f25
[ 49.641311] aops:swap_aops
[ 49.641313] flags: 0x300000000030508(uptodate|active|owner_priv_1|reclaim|swapbacked|node=0|zone=3)
[ 49.641314] raw: 0300000000030508 ffffed312c4bc908 ffffed312c4bc9c8 0000000000000000
[ 49.641315] raw: 00000007f404d925 00000000000c823b 00000002ffffffff 0000000000000000
[ 49.641315] page dumped because: migration failure
When debugging this, I found that these migration failures were due to
__migrate_folio() returning -EAGAIN for a small set of folios because the
expected reference count it calculates via folio_expected_ref_count() is
one less than the actual reference count of the folios. Furthermore, all
of the affected folios were not anonymous, but had the PG_swapcache flag
set, inspiring this patch. After applying this patch, the memory
hot-unplug behaves as expected.
I tested this on a machine running Ubuntu 24.04 with kernel version
6.8.0-90-generic and 64GB of memory. The guest VM is managed by libvirt
and runs Ubuntu 24.04 with kernel version 6.18 (though the head of the
mm-unstable branch as a Dec 16, 2025 was also tested and behaves the same)
and 48GB of memory. The libvirt XML definition for the VM can be found at
[1]. CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is set in the guest
kernel so the hot-pluggable memory is automatically onlined.
Below are the steps to reproduce this behavior:
1) Define and start and virtual machine
host$ virsh -c qemu:///system define ./test_vm.xml # test_vm.xml from [1]
host$ virsh -c qemu:///system start test_vm
2) Setup swap in the guest
guest$ sudo fallocate -l 32G /swapfile
guest$ sudo chmod 0600 /swapfile
guest$ sudo mkswap /swapfile
guest$ sudo swapon /swapfile
3) Use alloc_data [2] to allocate most of the remaining guest memory
guest$ ./alloc_data 45
4) In a separate guest terminal, monitor the amount of used memory
guest$ watch -n1 free -h
5) When alloc_data has finished allocating, initiate the memory
hot-unplug using the provided xml file [3]
host$ virsh -c qemu:///system detach-device test_vm ./remove.xml --live
After initiating the memory hot-unplug, you should see the amount of
available memory in the guest decrease, and the amount of used swap data
increase. If everything works as expected, when all of the memory is
unplugged, there should be around 8.5-9GB of data in swap. If the
unplugging is unsuccessful, the amount of used swap data will settle below
that. If that happens, you should be able to see log messages in dmesg
similar to the one posted above.
Link: https://lkml.kernel.org/r/20251216200727.2360228-1-bijan311@gmail.com
Link: https://github.com/BijanT/linux_patch_files/blob/main/test_vm.xml [1]
Link: https://github.com/BijanT/linux_patch_files/blob/main/alloc_data.c [2]
Link: https://github.com/BijanT/linux_patch_files/blob/main/remove.xml [3]
Fixes: 86ebd50224 ("mm: add folio_expected_ref_count() for reference count calculation")
Signed-off-by: Bijan Tabatabai <bijan311@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 78cb1a13c4 ]
Now that PAGE_MAPPING_MOVABLE is gone, we can simplify and rely on the
folio_test_anon() test only.
... but staring at the users, this function should never even have been
called on movable_ops pages. E.g.,
* __buffer_migrate_folio() does not make sense for them
* folio_migrate_mapping() does not make sense for them
* migrate_huge_page_move_mapping() does not make sense for them
* __migrate_folio() does not make sense for them
* ... and khugepaged should never stumble over them
Let's simply refuse typed pages (which includes slab) except hugetlb, and
WARN.
Link: https://lkml.kernel.org/r/20250704102524.326966-26-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: f183663901 ("mm: consider non-anon swap cache folios in folio_expected_ref_count()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71154bbe49 ]
Syzkaller reports a simult-connect race leading to inconsistent fallback
status:
WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Modules linked in:
CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6
RSP: 0018:ffffc900006cf338 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf
RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900
R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0
Call Trace:
<TASK>
tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197
tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922
tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672
tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918
ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500
dst_input include/net/dst.h:471 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979
__netif_receive_skb+0x1d/0x160 net/core/dev.c:6092
process_backlog+0x442/0x15e0 net/core/dev.c:6444
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494
napi_poll net/core/dev.c:7557 [inline]
net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684
handle_softirqs+0x216/0x8e0 kernel/softirq.c:579
run_ksoftirqd kernel/softirq.c:968 [inline]
run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960
smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160
kthread+0x3c2/0x780 kernel/kthread.c:463
ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The TCP subflow can process the simult-connect syn-ack packet after
transitioning to TCP_FIN1 state, bypassing the MPTCP fallback check,
as the sk_state_change() callback is not invoked for * -> FIN_WAIT1
transitions.
That will move the msk socket to an inconsistent status and the next
incoming data will hit the reported splat.
Close the race moving the simult-fallback check at the earliest possible
stage - that is at syn-ack generation time.
About the fixes tags: [2] was supposed to also fix this issue introduced
by [3]. [1] is required as a dependence: it was not explicitly marked as
a fix, but it is one and it has already been backported before [3]. In
other words, this commit should be backported up to [3], including [2]
and [1] if that's not already there.
Fixes: 23e89e8ee7 ("tcp: Don't drop SYN+ACK for simultaneous connect().") [1]
Fixes: 4fd19a3070 ("mptcp: fix inconsistent state on fastopen race") [2]
Fixes: 1e777f39b4 ("mptcp: add MSG_FASTOPEN sendmsg flag support") [3]
Cc: stable@vger.kernel.org
Reported-by: syzbot+0ff6b771b4f7a5bce83b@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/586
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251212-net-mptcp-subflow_data_ready-warn-v1-1-d1f9fd1c36c8@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ adapted mptcp_try_fallback() call ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2b8d20628 upstream.
For zoned block devices that do not need zone write plugs (e.g. most
device mapper devices that support zones), the disk hash table of zone
write plugs is NULL. For such devices, blk_zone_reset_all_bio_endio()
should not attempt to scan this has table as that causes a NULL pointer
dereference.
Fix this by checking that the disk does have zone write plugs using the
atomic counter. This is equivalent to checking for a non-NULL hash table
but has the advantage to also speed up the execution of
blk_zone_reset_all_bio_endio() for devices that do use zone write plugs
but do not have any plug in the hash table (e.g. a disk with only full
zones).
Fixes: efae226c2e ("block: handle zone management operations completions")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fd8720dff upstream.
Since commit 222f2c7c6d14 ("iomap: always run error completions in user
context"), read error completions are deferred to s_dio_done_wq. This
means the workqueue also needs to be allocated for async reads.
Fixes: 222f2c7c6d14 ("iomap: always run error completions in user context")
Reported-by: syzbot+a2b9a4ed0d61b1efb3f5@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251124140013.902853-1-hch@lst.de
Tested-by: syzbot+a2b9a4ed0d61b1efb3f5@syzkaller.appspotmail.com
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b22d0fcc6 upstream.
damon_do_test_apply_three_regions() is assuming all dynamic memory
allocation in it will succeed. Those are indeed likely in the real use
cases since those allocations are too small to fail, but theoretically
those could fail. In the case, inappropriate memory access can happen.
Fix it by appropriately cleanup pre-allocated memory and skip the
execution of the remaining tests in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-18-sj@kernel.org
Fixes: 17ccae8bb5 ("mm/damon: add kunit tests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28ab2265e9 upstream.
damon_test_new_filter() is assuming all dynamic memory allocation in it
will succeed. Those are indeed likely in the real use cases since those
allocations are too small to fail, but theoretically those could fail. In
the case, inappropriate memory access can happen. Fix it by appropriately
cleanup pre-allocated memory and skip the execution of the remaining tests
in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-14-sj@kernel.org
Fixes: 2a158e956b ("mm/damon/core-test: add a test for damos_new_filter()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eded254cb6 upstream.
damon_test_split_regions_of() is assuming all dynamic memory allocation in
it will succeed. Those are indeed likely in the real use cases since
those allocations are too small to fail, but theoretically those could
fail. In the case, inappropriate memory access can happen. Fix it by
appropriately cleanup pre-allocated memory and skip the execution of the
remaining tests in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-9-sj@kernel.org
Fixes: 17ccae8bb5 ("mm/damon: add kunit tests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc85a46928 ]
Commit 2b938e3db3 ("vfio/pci: Enable iowrite64 and ioread64 for vfio
pci") enables qword access to the PCI bar resources. However certain
devices (e.g. Intel X710) are observed with problem upon qword accesses
to the rom bar, e.g. triggering PCI aer errors.
This is triggered by Qemu which caches the rom content by simply does a
pread() of the remaining size until it gets the full contents. The other
bars would only perform operations at the same access width as their
guest drivers.
Instead of trying to identify all broken devices, universally disable
qword access to the rom bar i.e. going back to the old way which worked
reliably for years.
Reported-by: Farrah Chen <farrah.chen@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220740
Fixes: 2b938e3db3 ("vfio/pci: Enable iowrite64 and ioread64 for vfio pci")
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Link: https://lore.kernel.org/r/20251218081650.555015-2-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 634c2cd17b ]
Currently the function vpu_vb_is_codecconfig() always returns 0.
Delete it and its related code.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5d1e54bb4d ]
Some functions defined in vpu_v4l2.c are never used outside of that
compilation unit. Make them static.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Stable-dep-of: 634c2cd17b ("media: amphion: Remove vpu_vb_is_codecconfig")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ea16ba6ea ]
By default the amphion decoder will pre-parse 3 frames before starting
to decode the first frame. Alternatively, a block of flush padding data
can be appended to the frame, which will ensure that the decoder can
start decoding immediately after parsing the flush padding data, thus
potentially reducing decoding latency.
This mode was previously only enabled, when the display delay was set to
0. Allow the user to manually toggle the use of that mode via a module
parameter called low_latency, which enables the mode without
changing the display order.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: 634c2cd17b ("media: amphion: Remove vpu_vb_is_codecconfig")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5844227e0 ]
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock.
Fixes: 6467cda18c ("media: mediatek: vcodec: adding lock to protect decoder context list")
Fixes: afaaf3a0f6 ("media: mediatek: vcodec: adding lock to protect encoder context list")
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ adapted file_to_dec_ctx() and file_to_enc_ctx() helper calls to equivalent fh_to_dec_ctx(file->private_data) and fh_to_enc_ctx(file->private_data) pattern ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0da2ba35c0 ]
Let's properly adjust BALLOON_MIGRATE like the other drivers.
Note that the INFLATE/DEFLATE events are triggered from the core when
enqueueing/dequeueing pages.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-3-david@redhat.com
Fixes: fe030c9b85 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15504b1163 ]
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 0da2ba35c0 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb05f992b6 ]
Patch series "mm/migration: rework movable_ops page migration (part 1)",
v2.
In the future, as we decouple "struct page" from "struct folio", pages
that support "non-lru page migration" -- movable_ops page migration such
as memory balloons and zsmalloc -- will no longer be folios. They will
not have ->mapping, ->lru, and likely no refcount and no page lock. But
they will have a type and flags 🙂
This is the first part (other parts not written yet) of decoupling
movable_ops page migration from folio migration.
In this series, we get rid of the ->mapping usage, and start cleaning up
the code + separating it from folio migration.
Migration core will have to be further reworked to not treat movable_ops
pages like folios. This is the first step into that direction.
This patch (of 29):
The core will set PG_isolated only after mops->isolate_page() was called.
In case of the balloon, that is where we will remove it from the balloon
list. So we cannot have isolated pages in the balloon list.
Let's drop this unnecessary check.
Link: https://lkml.kernel.org/r/20250704102524.326966-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 0da2ba35c0 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9583f9d229 ]
caab002d50 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in
PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb).
But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S
directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are
Linux-created values that only coincidentally matched the PCIe spec.
b478e162f2 ("PCI/ASPM: Consolidate link state defines") later changed
them so they no longer matched the PCIe spec, so the bits ended up in the
wrong place in PCI_EXP_LNKCAP.
Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an
'aspm-no-l0s' property. Rely on brcmstb hardware to advertise L0s and/or
L1 support otherwise.
Fixes: caab002d50 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/linux-pci/20250925194424.GA2197200@bhelgaas
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded subject and description, added closes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251003170436.1446030-1-james.quinlan@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a364d10ffe ]
By default, the driver relies on the default hardware defined value for the
Max Link Width (MLW) capability. But if the "num-lanes" DT property is
present, assume that the chip's default capability information is incorrect
or undesired, and use the specified value instead.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded the description and comments]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250530224035.41886-3-james.quinlan@broadcom.com
Stable-dep-of: 9583f9d229 ("PCI: brcmstb: Fix disabling L0s capability")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2bae7beda1 ]
The strm->sample_width is not filled during rz_ssi_dai_hw_params(). This
wrong value is used for caching sample_width in struct hw_params_cache.
Fix this issue by replacing 'strm->sample_width'->'params_width(params)'
in rz_ssi_dai_hw_params(). After this drop the variable sample_width
from struct rz_ssi_stream as it is unused.
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bcba172793 ]
For some reason we endedup allocating sdw_stream_runtime for every cpu dai,
this has two issues.
1. we never set snd_soc_dai_set_stream for non soundwire dai, which
means there is no way that we can free this, resulting in memory leak
2. startup and shutdown callbacks can be called without
hw_params callback called. This combination results in memory leak
because machine driver sruntime array pointer is only set in hw_params
callback.
Fix this by
1. adding a helper function to get sdw_runtime for substream
which can be used by shutdown callback to get hold of sruntime to free.
2. only allocate sdw_runtime for soundwire dais.
Fixes: d32bac9cb0 ("ASoC: qcom: Add helper for allocating Soundwire stream runtime")
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Steev Klimaszewski <threeway@gmail.com> # Thinkpad X13s
Link: https://patch.msgid.link/20251022143349.1081513-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc90bbefa7 ]
In the existing definition of sdw_stream_runtime, the 'type' member is
never set and defaults to PCM. To prepare for the BPT/BRA support, we
need to special-case streams and make use of the 'type'.
No functional change for now, the implicit PCM type is now explicit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: bcba172793 ("ASoC: qcom: sdw: fix memory leak for sdw_stream_runtime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efae226c2e ]
The functions blk_zone_wplug_handle_reset_or_finish() and
blk_zone_wplug_handle_reset_all() both modify the zone write pointer
offset of zone write plugs that are the target of a reset, reset all or
finish zone management operation. However, these functions do this
modification before the BIO is executed. So if the zone operation fails,
the modified zone write pointer offsets become invalid.
Avoid this by modifying the zone write pointer offset of a zone write
plug that is the target of a zone management operation when the
operation completes. To do so, modify blk_zone_bio_endio() to call the
new function blk_zone_mgmt_bio_endio() which in turn calls the functions
blk_zone_reset_all_bio_endio(), blk_zone_reset_bio_endio() or
blk_zone_finish_bio_endio() depending on the operation of the completed
BIO, to modify a zone write plug write pointer offset accordingly.
These functions are called only if the BIO execution was successful.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[ adapted bdev_zone_is_seq() check to disk_zone_is_conv() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52a525011c ]
The full duplex audio starts with half duplex mode and then switch to
full duplex mode (another FIFO reset) when both playback/capture
streams available leading to random audio left/right channel swap
issue. Fix this channel swap issue by detecting the full duplex
condition by populating struct dup variable in startup() callback
and synchronize starting both the play and capture at the same time
in rz_ssi_start().
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Co-developed-by: Tony Tang <tony.tang.ks@renesas.com>
Signed-off-by: Tony Tang <tony.tang.ks@renesas.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d970eda00 upstream.
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context.
Cc: stable@vger.kernel.org
Fixes: 1dfc2e4611 ("gve: Refactor napi add and remove functions")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20251219102945.2193617-1-hramamurthy@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ea97b76d6 upstream.
The sanity checks in hrtimer_update_function() are expensive for high
frequency usage like in the io/uring code due to locking.
Hide the sanity checks behind CONFIG_PROVE_LOCKING, which has a decent
chance to be enabled on a regular basis for testing.
Fixes: 8f02e3563b ("hrtimers: Introduce hrtimer_update_function()")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/87ikpllali.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>