The chip has strange power-on reset values for the registers that
control the output ASRC and DAC source muxes - the values are actually
marked "Reserved" in the datasheet [1]. This means that until the
underlying kcontrols are modified, the codec will not function as
expected.
The registers in question are:
register / field reset value valid values
ASRCO_SOURCE_0_1 0x10
ASRC_OUT_SOURCE0 0 4 .. 16
ASRC_OUT_SOURCE1 1 4 .. 16
ASRCO_SOURCE_2_3 0x10
ASRC_OUT_SOURCE2 2 4 .. 16
ASRC_OUT_SOURCE3 3 4 .. 16
DAC_SOURCE_0_1 0x10
DAC_SOURCE_0 0 12 .. 13
DAC_SOURCE_1 1 12 .. 13
Set some sane defaults during the driver probe:
ADC Decimator0 -> Output ASRC0
ADC Decimator1 -> Output ASRC1
ADC Decimator2 -> Output ASRC2
ADC Decimator3 -> Output ASRC3
Input ASRC0 -> DAC0
Input ASRC1 -> DAC1
With this, the chip will behave as advertised by the default kcontrol
state exposed by the driver.
[1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1372.pdf
Fixes: 6cd4c6459e ("ASoC: Add ADAU1372 audio CODEC support")
Signed-off-by: Alvin Šipraga <alvin.sipraga@analog.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20261006-asoc-adau1372-fixes-v1-2-599cc17fb5f6@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
gpiod_set_value() emits a WARN when the GPIO provider indicates that it
can sleep, as is typical for I2C controlled GPIO expanders. Since the
powerdown GPIO is only manipulated in process context, use the _cansleep
variant instead. This lets the driver use sleepy GPIOs to power off the
chip.
Fixes: 6cd4c6459e ("ASoC: Add ADAU1372 audio CODEC support")
Signed-off-by: Alvin Šipraga <alvin.sipraga@analog.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20261006-asoc-adau1372-fixes-v1-1-599cc17fb5f6@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Acer Aspire Go 15 (AG15-21P, board MDC Herbag2_MDU) has two PDM
DMICs connected to the ACP. The BIOS does not set the AcpDmicConnected
_DSD property, so the acp6x machine driver never registers the DMIC
card. The existing Herbag_MDU entry does not match this board name, so
add a DMI quirk for it.
Tested on BIOS V1.11: the acp6x DMIC capture device is registered and
records audio on both channels.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Garland <minimelkav@gmail.com>
Link: https://patch.msgid.link/20261005-acp6x-herbag2-quirk-v1-1-a1f2683d758f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Dell XPS 13 DX13260 create an acpi_gpio_mapping with exactly two
GPIO entries to point at the two pins in the GpioIo(). Use this to
read the speaker ID GPIOs.
This fixes problems on Dell XPS 13 DX13260:
- No speaker audio
- The wrong firmware was loaded so the speaker protection did not match
the speaker characteristics.
The Dell XPS 13 DX13260 has two speaker ID GPIOs, to form a 2-bit ID. The
ACPI GpioIo() has both pins but the Linux-specific spk-id-gpios property
only has a mapping to the first pin. This meant that the speaker ID was
wrong in most cases, and that would lead to the codec driver loading the
wrong amp firmware, or not finding a firmware (as 0 is not a valid ID on
this laptop).
Assisted-by: Codex:gpt-6-sol
Reported-by: Wiza Jalakasi <wjalakasi@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221956
Tested-by: Wiza Jalakasi <wjalakasi@gmail.com>
Fixes: f3c6051477 ("spi: cs42l43: Add GPIO speaker id support to the bridge configuration")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20261001085830.4014291-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 902f497a1f ("ASoC: codecs: lpass-wsa-macro: remove useless
gain read/write sequence") removed the read and write of the digital
volume register in wsa_macro_enable_interpolator(), on the grounds that
writing back the value just read does nothing. The comment above it,
"apply gain after int clk is enabled", was left in place.
On the Dell XPS 13 9345 (X1E80100, four WSA8845 amplifiers on two WSA
macros) the write does something: a volume change made while the path
is idle does not take effect when playback starts. Lowering the digital
volume from 81 to 63 with nothing playing, then playing a test tone,
gave about the same level as before the change. With the rewrite
restored, lowering it from 81 to 69 while idle played audibly quieter,
and restoring 81 while idle brought the level back. Changes made during
playback take effect with or without the rewrite.
The register already holds the new value when this happens. Without the
rewrite, after an idle change from 69 to 81, playback stayed at the old
level while the register, read from the hardware through /dev/mem, held
the new one (0xfd). Writing that same value back through /dev/mem
brought the level up at once.
This is the behaviour described in commit 46188db080 ("ASoC: codecs:
lpass-wsa-macro: fix compander volume hack"): "the volume registers
still need to be written after enabling clocks in order for any prior
updates to take effect." The value read comes from the register cache,
so the write pushes the last requested volume to the hardware once its
clock runs.
Restore the rewrite in the interpolator's POST_PMU event only. The mix
path event removed later in the same series is not brought back.
Fixes: 902f497a1f ("ASoC: codecs: lpass-wsa-macro: remove useless gain read/write sequence")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Liviu Nicoara <lnicoara@thinkoid.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260929115755.6096-1-lnicoara@thinkoid.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ASUS Zenbook S14 UM5406GA (Strix Point, ACP 7.0) to
acp70_acpi_flag_override_table so that the broken BIOS
acp-audio-config-flag is ignored and the default SoundWire
enumeration path is used. Without this, no ASoC machine driver
matches and internal speakers/mic fail to probe.
Reported-by: Jannick Tobler <business@jtobler.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=222009
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260928083925.266471-1-zhangheng@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
A variant of the Lenovo Yoga Slim 7 exists on Lunar Lake that
doesn't have a physical jack socket. Cirrus codecs still use match
tables on LNL but the match table makes no distinction between a system
with or without a jack. This leads to the system failing probe as the
jack in the topology file is not matched by a DAI link as the machine
driver is constructed.
Add a new quirk to block using match tables for specific devices, and
rely on function topologies which can handle this difference seamlessly.
This is slightly preferred over moving everything to function topologies
due to the lower chance of causing regressions on other systems.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260928105610.242687-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAI ID is a hardware port ID and is not necessarily the index of
the corresponding entry in variant->dai_driver.
When configuring a DAI with LPAIF_I2SCTL_MODE_QUAD01, the probe code
currently uses dai_id to index variant->dai_driver. This is incorrect
for platforms where DAI IDs are sparse. For example, the IPQ806x MI2S
DAI has ID 4 while it is the only entry in the DAI driver table. If
that DAI is configured for QUAD01 and probe reaches this branch, the
code writes beyond that single entry via dai_driver[4] instead of
updating the DAI being processed.
Use the loop index i when updating the current DAI's playback channel
constraints, while retaining dai_id for indexing the hardware-port
specific playback SD-line mode array.
This fixes the incorrect DAI table access for platforms where the DAI
ID does not match its position in the driver table.
Fixes: c223f41c1a ("ASoC: qcom: Add four speaker support on MI2S secondary")
Cc: stable@vger.kernel.org
Signed-off-by: Zimeng Li <me@lizi.moe>
Assisted-by: LLM-assisted source analysis
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260927010911.51980-1-me@lizi.moe
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Chuwi Hi8 tablets with model number CWI513 ship with a BIOS
(American Megatrends 5.11, dated 05/21/2016) whose DMI sys_vendor and
product_name are both "Default string". The tested unit is labelled
just "Hi8", but its model number is the same as the existing "Chuwi Hi8
Pro (CWI513)" entry, and it needs the same quirks. That entry matches on
sys_vendor "Hampoo" and product_name "X1D3_C806N", so it never applies
to these units.
Without its quirks the internal speaker, whose amplifier has a
differential input wired across LOUT left and right, cancels to a faint
distorted residual for any centred (L == R) content, and the headphone
channels are swapped.
Add an entry matching board_vendor "Hampoo" and board_name "Cherry Trail
CR", plus the BIOS date since those two are too generic on their own.
drivers/platform/x86/touchscreen_dmi.c already matches the Chuwi HiBook
the same way.
The quirks are those of the existing Hi8 Pro entry, except for the
over-current detection scale factor: 1.0 instead of the 0.75 from
BYT_RT5651_DEFAULT_QUIRKS. With 0.75 and a CTIA headset (inline mic and
one button), loud speech into the mic, and headphone playback coupling
onto the mic line, were reported as spurious KEY_PLAYPAUSE presses, one
of them held for a whole 8 second speech window. With 1.0 the same test
gave no spurious events, and 3 real button presses were reported as
exactly 3 press/release pairs.
Tested on a unit with the generic DMI strings, with a module built from
this patch and no quirk module parameter. The quirks were applied via
the new entry, the card components read "cfg-spk:1 cfg-mic:in2
cfg-hp:lrswap", and the following all work: speaker, headphone left/right
order, jack and headset-mic detection, headset button, and the internal
and headset mics.
The problem was diagnosed with the help of an AI coding assistant, which
also drafted this changelog.
Assisted-by: Claude Opus 5.5
Signed-off-by: Jasper Firth <jasper.m.f@hotmail.com>
Link: https://patch.msgid.link/20260925-hi8-quirk-v1-1-ffd00b0447f9@hotmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Maciej Strozek <mstrozek@opensource.cirrus.com> says:
The first corrects the point at which the suspended flag is set during
system suspend, the second balances the runtime PM reference taken in
probe when one of the later probe steps fails.
Link: https://patch.msgid.link/20260924095458.2683755-1-mstrozek@opensource.cirrus.com
Add a common error path in probe that balances the runtime PM reference.
Fixes: 3af1815a2f ("ASoC: SDCA: Add basic SDCA function driver")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260924095458.2683755-3-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drv->suspended path was executed before system suspension instead of
after, move it lower to correct it.
Fixes: 7a5214f769 ("ASoC: SDCA: Add basic system suspend support")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260924095458.2683755-2-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Yoga Pro 7 14ASP9 (83HN) has no digital microphone on the ACP
PDM interface; all internal mics are wired to the Realtek ALC287 codec.
Add 83HN to acp70_acpi_flag_override_table to prevent the legacy ACP
driver from binding and exposing a non-functional PDM capture device,
consistent with the sibling 83W5/83V9 entries.
Reported-by: Mikail <mikailb1998@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221886
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260922123029.534152-1-zhangheng@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As per specification, Sample Base Rate (bit 14)
shall be set to 1 for 44.1 kHz.
Fixes: c7e79b2b2d ("ASoC: rt274: add rt274 codec driver")
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260918111745.3589393-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fat fingered the change when reorganizing the jack-detect
initialization. Equivalent changes for rt274 and rt298:
Commit a43b4394bb ("ASoC: codecs: rt274: Always init jack_detect_work")
Commit 1eb73102da ("ASoC: codecs: rt298: Reorganize jack detect handling")
carry no update to the delay value.
>From user perspective, no difference has been observed between 1250 and
50 values on Intel's SkyLake, KabyLake and AmberLake configurations.
Fixes: 3082afe097 ("ASoC: codecs: rt286: Reorganize jack detect handling")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260918111745.3589393-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Stream6 Input Threshold control points at stream index 4, which is
already used by Stream5. The threshold get and put callbacks derive the
lane ID from the register offset, so the duplicate index makes Stream6
operate on lane 4 and leaves lane 5 inaccessible from userspace.
Use stream index 5 for Stream6.
Fixes: a2df8c2d5b ("ASoC: tegra: Add Tegra186 based ASRC driver")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260921085704.1248920-2-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DRC_THRESH_QR field is bits 7 and 6 of DRC_1, but the control sits on
DRC_0. Its shift and max are right for the field, only the register is
wrong.
Those bits of DRC_0 belong to DRC_STARTUP_GAIN, which "DRC Startup
Volume" claims as bits 10 to 6. So the two controls share bits 7 and 6.
Writing either one moves the other, and the quick release threshold is
never reached at all.
The six fields of DRC_1 tile it exactly, so there is nowhere else the
threshold could live. Point the control at DRC_1.
Found by a sweep for two controls claiming the same bits of one
register. No board with this codec was to hand, the register map is
the driver's own wm8903.h.
Fixes: f1c0a02f32 ("ALSA: ASoC: Add WM8903 CODEC driver")
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Assisted-by: Claude:claude-opus-5
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260920135327.3628704-1-sammiee5311@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo V15 G6 ARP (product name 83UU) uses the ACP6x PDM interface
for its internal digital microphone array. Its firmware exposes neither
the AcpDmicConnected _DSD property nor the _WOV method, so acp6x_probe()
falls through to the DMI check and returns -ENODEV, leaving
acp_yc_mach.0 unbound and no capture device registered.
Add a DMI quirk entry for this model. With it, the machine driver binds
and the DMIC capture device is created:
acp_yc_mach acp_yc_mach.0: Enabling ACP DMIC support via DMI
card 2: acp6x [acp6x], device 0: DMIC capture dmic-hifi-0
Capture was verified working with arecord and PipeWire.
Signed-off-by: Daniel Ortiz <letargopausado@gmail.com>
Link: https://patch.msgid.link/20260920011920.2482786-1-letargopausado@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the MHI HELLO exchange was relocated, it is sent only at device
registration. During a suspend-resume cycle, the firmware in WiFi
cards such as WCN7850 indefinitely waits for another HELLO,
triggering:
ath12k_wifi7_pci 0004:01:00.0: timeout while waiting for restart complete
ath12k_wifi7_pci 0004:01:00.0: failed to resume core: -110
Fix this by triggering the handshake from resume_early in the MHI
transport.
Validated on Qualcomm X1E-801800 on Lenovo Slim 7x across 10
suspend-resume cycles.
Fixes: 544d85de4d ("net: qrtr: Send HELLO message on endpoint register")
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://lore.kernel.org/all/6257c447-788d-4362-851e-0d552bcf7c56@oss.qualcomm.com/
Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Reported-by: Vlastimil Babka (SUSE) <vbabka@suse.com>
Link: https://lore.kernel.org/all/ab1491bb-cca5-4145-ac7d-31c966abf7b4@suse.com/
Tested-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reported-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/all/87a4plsg4w.wl-tiwai@suse.de/
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bunch of core and driver fixes:
- Couple of fixes in core around dma_chan_put() for kref underflow, user
after free bug and waiting for rcu readers for dma devices
- mmp sg length and wrong extended DRCMR base for SpacemiT K3
- hardware buffer descriptor chain fix for xilinx dma
- sun6i fixes for status behaviour and dma position registers
- runtime pm reference leak fix for sprd driver
-----BEGIN PGP SIGNATURE-----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=9a97
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- A couple of fixes in core around dma_chan_put() for kref underflow,
use-after-free and waiting for rcu readers for dma devices
- mmp sg length and wrong extended DRCMR base for SpacemiT K3
- hardware buffer descriptor chain fix for xilinx dma
- sun6i fixes for status behaviour and dma position registers
- runtime pm reference leak fix for sprd driver
* tag 'dmaengine-fix-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg()
dmaengine: xilinx_dma: Fix hardware buffer descriptor chain after cyclic DMA
dmaengine: pxa: fix double counting of the hw descriptors
dmaengine: sun6i: fix undefined behaviour in sun6i_dma_tx_status
dmaengine: sun6i: fix non-atomic read of DMA position registers
dmaengine: xilinx_dma: Fix hardware buffer descriptor reuse order
dmaengine: wait for RCU readers before releasing dma_device
dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()
dmaengine: Fix device kref underflow in dma_chan_put()
dmaengine: add dma_device_get() helper
dmaengine: sprd: Fix runtime PM reference leak in probe
dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn()
dmaengine: mmp_pdma: fix wrong extended DRCMR base for SpacemiT K3
- Cadence ensure work completion before clock stop
- Disable ghost Realtek on Asus GX651AX
-----BEGIN PGP SIGNATURE-----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=mDuH
-----END PGP SIGNATURE-----
Merge tag 'soundwire-7.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
- Cadence: ensure work completion before clock stop
- Disable ghost Realtek on Asus GX651AX
* tag 'soundwire-7.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: cadence_master: wait and cancel cdns->work before clock stop
soundwire: dmi-quirks: Disable ghost Realtek on Asus GX651AX
- Reject the loading of a potentially problematic microcode version
on Intel Granite Rapids systems (Chang S. Bae)
- On FRED, reconstruct the proper #GP context for rejected INT
instructions, to fix a signal ABI regression (Matthew Schwartz)
- Add a test for this signal ABI regression the x86
self-test suite (Matthew Schwartz)
- Don't emit the new and not yet properly supported EGPR instructions
(%r16-%r31) on CONFIG_X86_NATIVE_CPU=y builds (Chang S. Bae)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MP1H
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Reject the loading of a potentially problematic microcode version
on Intel Granite Rapids systems (Chang S. Bae)
- On FRED, reconstruct the proper #GP context for rejected INT
instructions, to fix a signal ABI regression (Matthew Schwartz)
- Add a test for this signal ABI regression the x86
self-test suite (Matthew Schwartz)
- Don't emit the new and not yet properly supported EGPR instructions
(%r16-%r31) on CONFIG_X86_NATIVE_CPU=y builds (Chang S. Bae)
* tag 'x86-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build/64: Prevent native builds from generating EGPR use
selftests/x86: Check signal state for rejected software interrupts
x86/fred: Reconstruct the #GP context for rejected INT instructions
x86/microcode/intel: Reject problematic loading on Granite Rapids systems
- Fix timer signal <-> exec() race, to prevent UAF (Thomas Gleixner)
- Clean up POSIX CPU timers right after de_thread(), to prevent UAF
(Hyunwoo Kim)
- Fix POSIX CPU timers race between expiry and timer_settime(),
to prevent UAF (Thomas Gleixner)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KhWJ
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer race fixes from Ingo Molnar:
- Fix timer signal <-> exec() race, to prevent UAF (Thomas Gleixner)
- Clean up POSIX CPU timers right after de_thread(), to prevent UAF
(Hyunwoo Kim)
- Fix POSIX CPU timers race between expiry and timer_settime(),
to prevent UAF (Thomas Gleixner)
* tag 'timers-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Prevent freeing a timer which is queued on the expiry list
exec: Cleanup POSIX timers right after de_thread()
signal: Prevent exec() race
present, but development headers (binutils-dev) are not
(Ulises Mendez Martinez)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vTNY
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
- Fix objtool build error on systems where libopcodes is
present, but development headers (binutils-dev) are not
(Ulises Mendez Martinez)
* tag 'objtool-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Validate disassembler headers in libopcodes probe
as well, to avoid races with (private) futex waiters
(Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qQHe
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Ingo Molnar:
- Also allocate a default private futex hash on vfork() as well, to
avoid races with (private) futex waiters (Peter Zijlstra)
* tag 'locking-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Also allocate private hash on vfork()
A few driver specific fixes, none of them particularly severe or
unusual.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmqvmVMACgkQJNaLcl1U
h9AOdwf/aRa54oHd6iLCPXNAbZLDie0pnJa/Q/5sjpJoVY9ofKc2XM9djmy60YdF
/VGIphT8gr6at6fLZHEBbLanu2MQC2vxW9zDh5n+Xe8HUS3sdrwtBJPSv74Mcfrf
OIv6nFrVsbo1IMF7x4ncYOhOBGKyOSqhsVdt+k6jl1wuTDJBHyFs7sdL1DGRCRu/
ba4n2W+kSxVeFx3ACFyDJ8l8vLqtyotFKkpmslrPmT0yHFwOr8SOMbyQ5MPxITpx
gqgLikR3OW5alOLxy1U2nWCdjNsc8UWBhx1sCnByYrUO3VmRIEx4j1l2wSVX0J7E
Ck7/pSpg1NGkxVYSLCTBufqq8kgPTQ==
=iy0J
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes, none of them particularly severe or
unusual"
* tag 'spi-fix-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-qspi: Reprogram the clock rate when the operation frequency changes
spi: spi-zynqmp-gqspi: stop the controller on shutdown
spi: virtio: Use the per-transfer bits per word
spi: spi-qpic-snand: avoid writing QPIC_EBI2_ECC_BUF_CFG register
Fixes mainly for cleanup and error handling, a good part of them
around DMA resource management.
- at91: ensure DMA channels are released on all exit paths
- imx: fix autosuspend cleanup on remove
- qcom-cci: fix device node reference leak
- atr, imx, qcom-geni: set adapter slot to NULL on registration
failure
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaq+VLAAKCRDaeAVmJtMt
bqmsAP9umA0ew1WQkQGTlTJLfbQdhwy8IDS7tMRAlgL7vsUxOQEApvFqr6Xtq2j7
HiSP35cHybZlA7P2T70A+MVniCJDRQ4=
=Sn1c
-----END PGP SIGNATURE-----
Merge tag 'i2c-fixes-7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c fixes from Andi Shyti:
"Fixes mainly for cleanup and error handling, a good part of them
around DMA resource management:
- at91: ensure DMA channels are released on all exit paths
- imx: fix autosuspend cleanup on remove
- qcom-cci: fix device node reference leak
- atr, imx, qcom-geni: set adapter slot to NULL on registration
failure"
* tag 'i2c-fixes-7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: qcom-cci: fix device_node refcount leak in cci_probe()/cci_remove()
i2c: qcom-geni: release DMA channels on probe error
i2c: imx: release DMA channels on probe error
i2c: at91: release DMA channels on remove and probe error
i2c: atr: fix dangling adapter pointer on add failure
i2c: imx: disable autosuspend on remove
- Fixes for evdev and input compat handling to zero-initialize on-stack
absinfo and force-feedback effect structures before partial or compat
copies from userspace, preventing kernel stack memory disclosure
- Fixes for the Synaptics RMI4 driver to prevent an out-of-bounds read
when writing multi-chunk blocks over SMBus and to avoid a NULL pointer
dereference during suspend/resume when the RMI device is unbound
- Fixes for the soc_button_array driver to propagate -EPROBE_DEFER on
non-Bay Trail/Cherry Trail platforms (fixing broken power and volume
buttons on the Microsoft Surface Pro 11) and to validate the ACPI
package element count before dereferencing
- A fix for the adp5588-keys driver to cache the initial GPIO hardware
state before registering the gpiochip so pre-configured pin states are
not clobbered by GPIO hogs during registration
- A fix for the cyttsp5 touchscreen driver to clamp the device-supplied
HID report size before copying into the response buffer, preventing a
buffer overflow
- A fix for the HP SDC serio driver to use timer_shutdown_sync() on
module exit so the periodic kicker timer cannot rearm itself during
teardown
- A fix for the eeti_ts touchscreen driver to export its OF module alias
so the module autoloads on Device Tree platforms
- Updates to the xpad joystick driver adding support for the Victrix Pro
BFG controller and Azeron devices, and fixing the device type
classification for the PDP Marvel Xbox 360 controller
- Quirks for the i8042 and atkbd drivers to keep the built-in keyboards
functional on the Acer Aspire Go 15 AG15-42P and Xiaomi Redmi Book Pro
16 2026
- A quirk for the Synaptics PS/2 touchpad driver disabling SMBus
InterTouch on the Lenovo ThinkPad T440p (board ID 2722) so the
touchpad and TrackPoint respond immediately at boot
- Other minor updates and documentation fixes, including reading the
"ti,poll-period" property as u32 in tsc2007, adding the mt6572
compatible to the MediaTek keypad Device Tree binding, fixing an
attribute name typo in the trackpoint sysfs ABI documentation, and
documenting that no new LED codes should be added to the input
subsystem.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaq9j+gAKCRBAj56VGEWX
nJ5KAQDnTOivIghgIGnlKTIYLSV4cJ0fWJh7J1/ubx9soK+9RwD/bDUdyryAaSTr
x95U7/fEvq/lXBFyK2LXyahuTC6vNQY=
=Vsfi
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Fixes for evdev and input compat handling to zero-initialize on-stack
absinfo and force-feedback effect structures before partial or compat
copies from userspace, preventing kernel stack memory disclosure
- Fixes for the Synaptics RMI4 driver to prevent an out-of-bounds read
when writing multi-chunk blocks over SMBus and to avoid a NULL
pointer dereference during suspend/resume when the RMI device is
unbound
- Fixes for the soc_button_array driver to propagate -EPROBE_DEFER on
non-Bay Trail/Cherry Trail platforms (fixing broken power and volume
buttons on the Microsoft Surface Pro 11) and to validate the ACPI
package element count before dereferencing
- A fix for the adp5588-keys driver to cache the initial GPIO hardware
state before registering the gpiochip so pre-configured pin states
are not clobbered by GPIO hogs during registration
- A fix for the cyttsp5 touchscreen driver to clamp the device-supplied
HID report size before copying into the response buffer, preventing a
buffer overflow
- A fix for the HP SDC serio driver to use timer_shutdown_sync() on
module exit so the periodic kicker timer cannot rearm itself during
teardown
- A fix for the eeti_ts touchscreen driver to export its OF module
alias so the module autoloads on Device Tree platforms
- Updates to the xpad joystick driver adding support for the Victrix
Pro BFG controller and Azeron devices, and fixing the device type
classification for the PDP Marvel Xbox 360 controller
- Quirks for the i8042 and atkbd drivers to keep the built-in keyboards
functional on the Acer Aspire Go 15 AG15-42P and Xiaomi Redmi Book
Pro 16 2026
- A quirk for the Synaptics PS/2 touchpad driver disabling SMBus
InterTouch on the Lenovo ThinkPad T440p (board ID 2722) so the
touchpad and TrackPoint respond immediately at boot
- Other minor updates and documentation fixes, including reading the
"ti,poll-period" property as u32 in tsc2007, adding the mt6572
compatible to the MediaTek keypad Device Tree binding, fixing an
attribute name typo in the trackpoint sysfs ABI documentation, and
documenting that no new LED codes should be added to the input
subsystem
* tag 'input-for-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: hp_sdc - shut down kicker timer on module exit
Input: xpad - add support for Victrix Pro BFG Controller
Input: tsc2007 - read "ti,poll-period" as u32
Input: trackpoint - fix the inertia attribute name in the ABI document
Input: eeti_ts - publish the OF module alias
Input: xpad - add support for Azeron devices
Input: xpad - fix PDP Marvel Xbox 360 controller
Input: document that no new LED codes should be added
Input: soc_button_array - check btns_desc->package.count
Input: soc_button_array - fix MS Surface Pro 11 probe failure
Input: i8042 - add quirk for Acer Aspire Go 15 AG15-42P
Input: synaptics - disable InterTouch on ThinkPad T440p (board id 2722)
Input: cyttsp5 - clamp the HID report size before memcpy
Input: zero ff_effect before compat copy in input_ff_effect_from_user
Input: evdev - zero absinfo before partial copy in EVIOCSABS
Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound
Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block()
Input: atkbd - skip deactivate for Xiaomi Redmi Book Pro 16 2026
dt-bindings: input: mediatek,mt6779-keypad: add mt6572
Input: adp5588-keys - cache GPIO state before registering the gpiochip
-----BEGIN PGP SIGNATURE-----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=kiQE
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20260919' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Ensure that the cached SELinux access decisions are correct
- Fix the SELinux overlayfs code to properly track the top-level/user
information on multiple stacked overlayfs filesystems
- Fix the SELinux overlayfs code to properly enforce mprotect() access
control policy on all of the different layers in multiple stacked
overlayfs filesystems
* tag 'selinux-pr-20260919' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: recheck intermediate backing files on mprotect()
selinux: preserve user SID across nested backing files
selinux: always fill AVC decision in avc_has_perm_noaudit()
The of_node_put() matching of_node_get() runs after i2c_del_adapter(),
whose trailing memset() zeroes adap->dev and thus adap->dev.of_node,
making the put a no-op and leaking the node on every adapter removal
and error cleanup.
Use a devm action: the pointer is captured at registration, out of
reach of that memset(), and devres runs the put once on probe failure
and detach, replacing the three manual of_node_put() calls. The
setup loop uses the scoped iterator form so the child node is released
automatically if devm_add_action_or_reset() fails mid-loop.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 02a4a69667 ("i2c: qcom-cci: don't put a device tree node before i2c_add_adapter()")
Assisted-by: Claude:claude-opus-5
Signed-off-by: Liu Zhenlong <dragonliu2018@gmail.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260818175750.4205-1-dragonliu2018@gmail.com
geni_i2c_init() grabs exclusive GPI tx/rx DMA channels when the serial
engine runs in GPI mode. If i2c_add_adapter() subsequently fails, probe
returns without releasing the channels, because the remove callback is
not invoked after a failed probe.
The adapter-registration failure path used to release the channels via
its err_dma label; that release was dropped when the probe tail was
restructured into geni_i2c_init().
Release the channels on the adapter-registration failure path, mirroring
geni_i2c_remove().
Fixes: d8d3bb127a ("i2c: qcom-geni: Isolate serial engine setup")
Assisted-by: GLM:5.3
Signed-off-by: Shengzhuo Wei <me@cherr.cc>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260827-i2c-dma-channel-leak-v1-3-271d4adc03a0@cherr.cc
i2c_imx_dma_request() acquires exclusive tx/rx DMA channels and is
optional: on errors other than -EPROBE_DEFER the driver falls back to
PIO mode and probe continues. If i2c_add_numbered_adapter() then fails,
probe returns through clk_notifier_unregister without releasing the
channels, because the remove callback is not invoked after a failed
probe.
Release the channels on the probe error path, mirroring
i2c_imx_remove().
Fixes: ce1a78840f ("i2c: imx: add DMA support for freescale i2c driver")
Assisted-by: GLM:5.3
Signed-off-by: Shengzhuo Wei <me@cherr.cc>
Cc: <stable@vger.kernel.org> # v3.19+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260827-i2c-dma-channel-leak-v1-2-271d4adc03a0@cherr.cc
at91_twi_configure_dma() requests exclusive tx/rx DMA channels, but
nothing ever releases them on driver detach, and the probe error path
after the channels are acquired (i2c_add_numbered_adapter() failure)
returns without releasing them either, because the remove callback is
not invoked after a failed probe.
Move the release into a helper, call it from the existing
configure-failure path, the adapter-registration failure path, and
at91_twi_remove().
Fixes: 60937b2cdb ("i2c: at91: add dma support")
Assisted-by: GLM:5.3
Signed-off-by: Shengzhuo Wei <me@cherr.cc>
Cc: <stable@vger.kernel.org> # v3.8+
Acked-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260827-i2c-dma-channel-leak-v1-1-271d4adc03a0@cherr.cc
Kijo analyzed another race in the POSIX CPU timer code:
Commit bf635681c9 converted cpu_timer::firing from a tristate value to a
boolean. This lost the distinction between "not owned by the firing list"
and "still owned, but delivery was canceled". The resulting race is:
expiry handler timer_settime() timer_delete()
-------------- --------------- --------------
collect timer onto
private firing list
firing = true
observes firing = true
firing = false
return TIMER_RETRY
wait for handler
observes firing = false
finish deletion
unhash and free timer
resume list traversal
read freed elist.next
-> UAF
The firing bit is clearly the wrong indicator since that commit.
Check whether the timer is queued on the expiry list or not instead. If it
is queued clear the firing bit to prevent signal delivery as before and
return TIMER_RETRY so the caller unlocks the timer which allows the expiry
code to make progress and remove it from the list.
Fixes: bf635681c9 ("posix-cpu-timers: Cleanup the firing logic")
Reported-by: Kijo Park <red993688@gmail.com>
Debugged-by: Kijo Park <red993688@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Kijo Park <red993688@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----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=WxSA
-----END PGP SIGNATURE-----
Merge tag 'for-7.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Among the regular fixes, there are two that were reported recently and
have user impact:
- filesystem id is now stable again on the default and common case
(it broke openconnect key derivation, while this is not secure,
it's still in use), the intention was to change id for the
temp_fsid use case
- fix detection of /dev/root and rename it after device scan, this
broke booting of initramdisk-less system with grub2 as the probe
needs the real device
Regular fixes:
- don't store compressed inline extent if the size is larger than
uncompressed
- in zoned mode, handle activation of zones for all supported block
group profiles in case there are still free ones left
- check space for a chunk item when reading sys array from superblock
- allow using space reserves when removing verity items fails
- fix error handling after free space tree rebuild fails
- abort transaction if reflink or hole punching fails and it's not
possible to update the inode
- properly protect block group iteration during device replace start
- error message fixups"
* tag 'for-7.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: derive f_fsid with dev_t only when temp_fsid is active
btrfs: add "/dev/root" exception for device path update
btrfs: check if there is space for chunk item when validating sys chunk array
btrfs: abort transaction on failure to update inode for hole punching and reflinking
btrfs: clear free space tree creation state on rebuild failure
btrfs: handle lack of space when cleaning up verity items
btrfs: fix creation of compressed inline extents that don't save space
btrfs: tree-checker: fix error message regarding free space extent items
btrfs: tree-checker: print dev extent offset in error message
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
btrfs: zoned: handle RAID profiles in btrfs_can_activate_zone()
Omar reports that CONFIG_X86_NATIVE_CPU=y allows builds to opportunistically
emit instructions using %r16-%r31 (EGPRs) when the build host supports APX
since the commit:
ea1dcca1de ("x86/kbuild/64: Add the CONFIG_X86_NATIVE_CPU option to locally optimize the kernel with '-march=native'")
But the kernel is not yet prepared to use new registers internally. For
example, there is no context-switch support for general in-kernel use.
Explicitly disable EGPR use when building with -march=native.
For C, since GCC 14 and Clang 18, both compilers support suppressing EGPR
use with -mno-apx-features=egpr, whose availability can be detected via
cc-option.
For Rust, pass features=-apxf through the generated JSON to avoid
unstable-feature warnings, see
https://github.com/rust-lang/rust/issues/139284
Note Rust only accepts the option to disable APX instructions entirely or not.
Support for this gating also depends on the Rust/LLVM combination. Rust
1.88 introduced the `apxf` feature option, but versions prior to 1.93 may
emit an `apxf` attribute to the backend that only LLVM 23 or later can
interpret. Restrict native Rust builds accordingly.
Fixes: ea1dcca1de ("x86/kbuild/64: Add the CONFIG_X86_NATIVE_CPU option to locally optimize the kernel with '-march=native'")
Reported-by: Omar Avelar <omar.avelar@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260916230003.1144622-1-chang.seok.bae@intel.com
fix for dma-buf, a drm_pending_vblank_event leak fix for drm,
suspend/resume fixes for nouveau, one out-of-bounds access fix for gud,
a use-after-free fix for vc4, a fence signaling fix, a race condition
fix for sched, planes formats fixes for verisilicon, and add the blend
mode property for loongson
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaqvVAAAKCRAnX84Zoj2+
dtThAX9JC7SWXw+n4o9EUsxNqvlpviwe8AS7aJR++rq/sZM0an7zl0aCJu/E8p+/
JRkO+X8BfjE+2CX8RWKH63ed95vA+9DF8JfryBTSJiSz4forppFfwH7uovT3nqq2
eOon6nJQzg==
=Utup
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-09-17' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Two ttm fixes for ttm_tt_swapout(), one page-alignment and one overflow
fix for dma-buf, a drm_pending_vblank_event leak fix for drm,
suspend/resume fixes for nouveau, one out-of-bounds access fix for gud,
a use-after-free fix for vc4, a fence signaling fix, a race condition
fix for sched, planes formats fixes for verisilicon, and add the blend
mode property for loongson
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <self@mripard.dev>
Link: https://patch.msgid.link/aqvVENQ4ksJEIcdb@houat
A batch of bug fixes for the smb client:
- Fix multiple out-of-bounds reads and use-after-frees in the SMB2/3
receive path that are reachable from a malicious or compromised
server: a stale next_buffer pointer and an integer overflow in
compound encrypted frame handling, missing minimum-PDU-size and
per-sub-PDU length validation before parsing command-specific
response fields, missing bounds checks in DFS referral, server
interface list, EA list, POSIX SID, snapshot enumeration and SMB1
reparse point parsing
- Fix use-after-frees and races in multichannel and connection
teardown, including an interface freed while still in use when
adding channels, a server used after its channel reference was
dropped, a reconnect work item left queued after the server is
freed and an uninitialized reconnect list node
- Fix a heap overflow in the native symlink parser: an absolute
target without an NT drive prefix caused out-of-bounds writes and a
u16 length underflow leading to a 64K memcpy into a small buffer,
triggerable by a user with write access to a mounted share under
default settings
- Fix WSL reparse point parsing: use unaligned accessors for the
packed extended-attribute payload to avoid alignment faults on some
architectures and stop leaving partially mutated fattr fields on
parse failure
- Fix lease break ACKs being sent through the wrong session on
multiuser mounts, which caused read failures (e.g. on NetApp
ONTAP/Azure Files) when copying files
- Fix an smbd_connection leak when cifs_get_tcp_session() fails after
an RDMA connection was already established
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTcqRusfSdYROJQwGkpVtNKoQNdYwUCaq2frwAKCRApVtNKoQNd
Y1mcAQDcDTkep03jzghyJG6xWJ3S7KNbeYpjkOPnPyR+Et7HmAD/eXLFvgkJ3wC7
tBUDjDTLeyP6/DOBmDb/fIKEw2vfBQs=
=+Vsw
-----END PGP SIGNATURE-----
Merge tag 'cifs-fixes-7.3-rc4' of https://git.manguebit.org/linux
Pull smb client fixes from Paulo Alcantara:
"A batch of bug fixes for the smb client:
- Fix multiple out-of-bounds reads and use-after-frees in the SMB2/3
receive path that are reachable from a malicious or compromised
server: a stale next_buffer pointer and an integer overflow in
compound encrypted frame handling, missing minimum-PDU-size and
per-sub-PDU length validation before parsing command-specific
response fields, missing bounds checks in DFS referral, server
interface list, EA list, POSIX SID, snapshot enumeration and SMB1
reparse point parsing
- Fix use-after-frees and races in multichannel and connection
teardown, including an interface freed while still in use when
adding channels, a server used after its channel reference was
dropped, a reconnect work item left queued after the server is
freed and an uninitialized reconnect list node
- Fix a heap overflow in the native symlink parser: an absolute
target without an NT drive prefix caused out-of-bounds writes and a
u16 length underflow leading to a 64K memcpy into a small buffer,
triggerable by a user with write access to a mounted share under
default settings
- Fix WSL reparse point parsing: use unaligned accessors for the
packed extended-attribute payload to avoid alignment faults on some
architectures and stop leaving partially mutated fattr fields on
parse failure
- Fix lease break ACKs being sent through the wrong session on
multiuser mounts, which caused read failures (e.g. on NetApp
ONTAP/Azure Files) when copying files
- Fix an smbd_connection leak when cifs_get_tcp_session() fails after
an RDMA connection was already established"
* tag 'cifs-fixes-7.3-rc4' of https://git.manguebit.org/linux:
cifs: Fix server use-after-free in cifs_chan_skip_or_disable()
smb: client: fix reparse buffer bounds in cifs_query_reparse_point()
smb: client: fix potential OOB read in smb3_enum_snapshots()
smb: client: fix missing iov bounds check in parse_posix_sids()
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
smb: client: reject short Next offsets in parse_server_interfaces()
smb: client: fix missing lower-bound check on DFS referral string offsets
smb: client: fix server->total_read for compound encrypted PDUs
smb: client: validate minimum PDU size before smb2_get_data_area_len()
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
smb: client: fix fattr leaking on wsl_to_fattr() failure
smb: client: fix unaligned access in WSL reparse point parser
smb: client: fix smbd_connection leak on cifs_get_tcp_session() error
smb: client: fix rlist race and missing initialization
smb: client: cancel reconnect work in clean_demultiplex_info()
smb/client: send lease break ACKs thru correct session for multiuser mounts
smb: client: validate absolute native symlink targets before NT fixups
Four driver fixes, three of which are minor and one of which (fnic)
tries to add some logic to try to avoid MSI-X being ineffective if
hyperthreading is disabled. The core fix adds validation to mode sense
buffer sizes because it is used by ATA and could, theoretically, be
exploited by a specially crafted USB device that can simply be plugged
in to any laptop or server.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaq2P/hsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIXJ6AD9FODcORvjoRDhcU626EWsG/Hoy7YcMH2T
bZVtZwp3hH8BAPnKar5uj3fCQxJkvI+sLKjiGultTi3llt9VaZGSTFj2
=JgQF
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four driver fixes, three of which are minor and one of which (fnic)
tries to add some logic to try to avoid MSI-X being ineffective if
hyperthreading is disabled.
The core fix adds validation to mode sense buffer sizes because it is
used by ATA and could, theoretically, be exploited by a specially
crafted USB device that can simply be plugged in to any laptop or
server"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()
scsi: fnic: Fix missed link-up when critical IRQ targets offline CPU
scsi: ibmvfc: Add Kconfig dependency to fix link failure when NVME_FC=m
scsi: qla2xxx: Fix the ql2xfc2target parameter description
scsi: pm80xx: Fix the use_msix, use_tasklet and read_wwn parameter descriptions
after ten seconds of inactivity when a new session setup request is
received. Sessions now expire only after credential expiration, while
stale unauthenticated sessions are cleaned up after a 45-second timeout.
- Keep earlier responses in compound requests when Query Info fails
because the output buffer is too small. The error response is appended
without truncating preceding responses.
- Return STATUS_BUFFER_OVERFLOW for partial
FILE_NORMALIZED_NAME_INFORMATION responses instead of incorrectly
returning STATUS_INFO_LENGTH_MISMATCH.
-----BEGIN PGP SIGNATURE-----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=9nNl
-----END PGP SIGNATURE-----
Merge tag 'ksmbd-for-7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/smb
Pull smb server fixes from Namjae Jeon:
- Fix session expiration so that valid sessions are no longer removed
after ten seconds of inactivity when a new session setup request is
received.
Sessions now expire only after credential expiration, while stale
unauthenticated sessions are cleaned up after a 45-second timeout.
- Keep earlier responses in compound requests when Query Info fails
because the output buffer is too small. The error response is
appended without truncating preceding responses.
- Return STATUS_BUFFER_OVERFLOW for partial
FILE_NORMALIZED_NAME_INFORMATION responses instead of incorrectly
returning STATUS_INFO_LENGTH_MISMATCH.
* tag 'ksmbd-for-7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/smb:
ksmbd: keep compound responses on query info errors
ksmbd: fix partial normalized name responses
ksmbd: follow SMB2 session expiration semantics
stream_config is not initialized before being passed to
sdw_stream_add_slave(). The type field may contain garbage and is
later copied to stream->type by sdw_config_stream().
Zero-initialize stream_config so type defaults to SDW_STREAM_PCM.
While at it, use snd_sdw_params_to_config() helper instead of
open-coding the same logic.
Fixes: 2b7aecd585 ("ASoC: rt1017: Add RT1017 SDCA amplifier driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Link: https://patch.msgid.link/20260914104551.377880-1-yijiangshan@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
stream_config is not initialized before being passed to
sdw_stream_add_slave(). The type field may contain garbage and is
later copied to stream->type by sdw_config_stream().
Zero-initialize stream_config so type defaults to SDW_STREAM_PCM.
Fixes: 18c0af945f ("ASoC: max98363: add soundwire amplifier driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Link: https://patch.msgid.link/20260914104456.376666-1-yijiangshan@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
dynamically reserving MFT tail records, accounting for records added
during allocation, and avoiding false -ENOSPC failures.
- Repack non-resident $MFT/$ATTRIBUTE_LIST when its mapping pairs no longer
fit in the base MFT record, while propagating allocation and writeback
errors.
- Serialize runlist updates with the runlist lock and restore both the
in-memory runlist and on-disk mapping pairs when allocation rollback is
required.
- Propagate folio errors and harden inode failure handling by treating
interrupted reads as transient failures and discarding and unhashing
inodes whose initialization fails.
- Fix the $MFTMirr write offset when mirror records span multiple folios,
preventing mirror records from overwriting the first record with large
MFT record sizes.
-----BEGIN PGP SIGNATURE-----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=rT1L
-----END PGP SIGNATURE-----
Merge tag 'ntfs-for-7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs fixes from Namjae Jeon:
- Make MFT extension work on existing Windows-created volumes by
dynamically reserving MFT tail records, accounting for records added
during allocation, and avoiding false -ENOSPC failures
- Repack non-resident $MFT/$ATTRIBUTE_LIST when its mapping pairs no
longer fit in the base MFT record, while propagating allocation and
writeback errors
- Serialize runlist updates with the runlist lock and restore both the
in-memory runlist and on-disk mapping pairs when allocation rollback
is required
- Propagate folio errors and harden inode failure handling by treating
interrupted reads as transient failures and discarding and unhashing
inodes whose initialization fails
- Fix the $MFTMirr write offset when mirror records span multiple
folios, preventing mirror records from overwriting the first record
with large MFT record sizes
* tag 'ntfs-for-7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: fix $MFTMirr write offset when it spans multiple folios
ntfs: unhash failed inode reads
ntfs: discard inodes that fail initialization
ntfs: ignore interrupted inode reads as corruption
ntfs: propagate folio errors
ntfs: protect runlist updates with the runlist lock
ntfs: account for MFT records added during allocation
ntfs: repack $MFT/$ATTRIBUTE LIST
ntfs: use dynamic MFT tail reservation
