Commit graph

1,072,133 commits

Author SHA1 Message Date
Hans de Goede
3b6740bdd5 ACPI: video: Drop dmi_system_id.ident settings from video_detect_dmi_table[]
The .ident field of the dmi_system_id structs in the
video_detect_dmi_table[] is not used by the code.

Change all .ident = "..." assignments to comments, this reduces the
size of video_detect.o / video.ko by about 1500 bytes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:32:21 +01:00
Hans de Goede
009a789443 ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
The handling of PMIC register reads through writing 0 to address 4
of the OpRegion is wrong. Instead of returning the read value
through the value64, which is a no-op for function == ACPI_WRITE calls,
store the value and then on a subsequent function == ACPI_READ with
address == 3 (the address for the value field of the OpRegion)
return the stored value.

This has been tested on a Xiaomi Mi Pad 2 and makes the ACPI battery dev
there mostly functional (unfortunately there are still other issues).

Here are the SET() / GET() functions of the PMIC ACPI device,
which use this OpRegion, which clearly show the new behavior to
be correct:

OperationRegion (REGS, 0x8F, Zero, 0x50)
Field (REGS, ByteAcc, NoLock, Preserve)
{
    CLNT,   8,
    SA,     8,
    OFF,    8,
    VAL,    8,
    RWM,    8
}

Method (GET, 3, Serialized)
{
    If ((AVBE == One))
    {
        CLNT = Arg0
        SA = Arg1
        OFF = Arg2
        RWM = Zero
        If ((AVBG == One))
        {
            GPRW = Zero
        }
    }

    Return (VAL) /* \_SB_.PCI0.I2C7.PMI5.VAL_ */
}

Method (SET, 4, Serialized)
{
    If ((AVBE == One))
    {
        CLNT = Arg0
        SA = Arg1
        OFF = Arg2
        VAL = Arg3
        RWM = One
        If ((AVBG == One))
        {
            GPRW = One
        }
    }
}

Fixes: 0afa877a56 ("ACPI / PMIC: intel: add REGS operation region support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:28:32 +01:00
Andrii Nakryiko
8388092b25 Merge branch 'libbpf: deprecate bpf_program__get_prog_info_linear'
Dave Marchevsky says:

====================

bpf_program__get_prog_info_linear is a helper which wraps the
bpf_obj_get_info_by_fd BPF syscall with some niceties that put
all dynamic-length bpf_prog_info in one buffer contiguous with struct
bpf_prog_info, and simplify the selection of which dynamic data to grab.

The resultant combined struct, bpf_prog_info_linear, is persisted to
file by 'perf' to enable later annotation of BPF prog data. libbpf
includes some vaddr <-> offset conversion helpers for
struct bpf_prog_info_linear to simplify this.

This functionality is heavily tailored to perf's usecase, so its use as
a general prog info API should be deemphasized in favor of just calling
bpf_obj_get_info_by_fd, which can be more easily fit to purpose. Some
examples from caller migrations in this series:

  * Some callers weren't requesting or using dynamic-sized prog info and
    are well served by a simple get_info_by_fd call (e.g.
    dump_prog_id_as_func_ptr in bpftool)
  * Some callers were requesting all of a specific dynamic info type but
    only using the first record, so can avoid unnecessary malloc by
    only requesting 1 (e.g. profile_target_name in bpftool)
  * bpftool's do_dump saves some malloc/free by growing and reusing its
    dynamic prog_info buf as it loops over progs to grab info and dump.

Perf does need the full functionality of
bpf_program__get_prog_info_linear and its accompanying structs +
helpers, so copy the code to its codebase, migrate all other uses in the
tree, and deprecate the helper in libbpf.

Since the deprecated symbols continue to be included in perf some
renaming was necessary in perf's copy, otherwise functionality is
unchanged.

This work was previously discussed in libbpf's issue tracker [0].

[0]: https://github.com/libbpf/libbpf/issues/313

v2->v3:
  * Remove v2's patch 1 ("libbpf: Migrate internal use of
    bpf_program__get_prog_info_linear"), which was applied [Andrii]
  * Add new patch 1 migrating error checking of libbpf calls to
    new scheme [Andrii, Quentin]
  * In patch 2, fix != -1 error check of libbpf call, improper realloc
    handling, and get rid of confusing macros [Andrii]
  * In patch 4, deprecate starting from 0.6 instead of 0.7 [Andrii]

v1->v2: fix bpftool do_dump changes to clear bpf_prog_info after use and
correctly pass realloc'd ptr back (patch 2)
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2021-11-03 11:25:37 -07:00
Dave Marchevsky
f5aafbc2af libbpf: Deprecate bpf_program__get_prog_info_linear
As part of the road to libbpf 1.0, and discussed in libbpf issue tracker
[0], bpf_program__get_prog_info_linear and its associated structs and
helper functions should be deprecated. The functionality is too specific
to the needs of 'perf', and there's little/no out-of-tree usage to
preclude introduction of a more general helper in the future.

  [0] Closes: https://github.com/libbpf/libbpf/issues/313

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-5-davemarchevsky@fb.com
2021-11-03 11:25:36 -07:00
Dave Marchevsky
199e06fe83 perf: Pull in bpf_program__get_prog_info_linear
To prepare for impending deprecation of libbpf's
bpf_program__get_prog_info_linear, pull in the function and associated
helpers into the perf codebase and migrate existing uses to the perf
copy.

Since libbpf's deprecated definitions will still be visible to perf, it
is necessary to rename perf's definitions.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-4-davemarchevsky@fb.com
2021-11-03 11:25:36 -07:00
Dave Marchevsky
c59765cfd1 bpftool: Use bpf_obj_get_info_by_fd directly
To prepare for impending deprecation of libbpf's
bpf_program__get_prog_info_linear, migrate uses of this function to use
bpf_obj_get_info_by_fd.

Since the profile_target_name and dump_prog_id_as_func_ptr helpers were
only looking at the first func_info, avoid grabbing the rest to save a
malloc. For do_dump, add a more full-featured helper, but avoid
free/realloc of buffer when possible for multi-prog dumps.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-3-davemarchevsky@fb.com
2021-11-03 11:25:32 -07:00
Dave Marchevsky
60f2707539 bpftool: Migrate -1 err checks of libbpf fn calls
Per [0], callers of libbpf functions with LIBBPF_STRICT_DIRECT_ERRS set
should handle negative error codes of various values (e.g. -EINVAL).
Migrate two callsites which were explicitly checking for -1 only to
handle the new scheme.

  [0]: https://github.com/libbpf/libbpf/wiki/Libbpf-1.0-migration-guide#direct-error-code-returning-libbpf_strict_direct_errs

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-2-davemarchevsky@fb.com
2021-11-03 11:22:30 -07:00
wangzhitong
69cace6e18 ACPI: EC: Remove initialization of static variables to false
Remove the initialization of two static variables to false which is
pointless.

Signed-off-by: wangzhitong <wangzhitong@uniontech.com>
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:17:40 +01:00
Binbin Zhou
eb794e3c6b ACPI: EC: Use ec_no_wakeup on HP ZHAN 66 Pro
EC interrupts constantly wake up system from s2idle, so set
ec_no_wakeup by default to keep the system in s2idle and reduce
energy consumption.

Signed-off-by: Binbin Zhou <zhoubinbin@uniontech.com>
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:13:01 +01:00
Sakari Ailus
1e96078e0a at24: Support probing while in non-zero ACPI D state
In certain use cases (where the chip is part of a camera module, and the
camera module is wired together with a camera privacy LED), powering on
the device during probe is undesirable. Add support for the at24 to
execute probe while being in ACPI D state other than 0 (which means fully
powered on).

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:03:55 +01:00
Rajmohan Mani
434aa74bd7 media: i2c: imx319: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:03:55 +01:00
Sakari Ailus
b82a7df4a7 ACPI: Add a convenience function to tell a device is in D0 state
Add a convenience function to tell whether a device is in D0 state,
primarily for use in drivers' probe or remove functions on busses where
the custom is to power on the device for the duration of both.

Returns false on non-ACPI systems.

Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:03:55 +01:00
Sakari Ailus
ed66f12ba4 Documentation: ACPI: Document _DSC object usage for enum power state
Document the use of the _DSC object for setting desirable power state
during probe.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:03:55 +01:00
Sakari Ailus
b18c1ad685 i2c: Allow an ACPI driver to manage the device's power state during probe
Enable drivers to tell ACPI that there's no need to power on a device for
probe. Drivers should still perform this by themselves if there's a need
to. In some cases powering on the device during probe is undesirable, and
this change enables a driver to choose what fits best for it.

Add a field called "flags" into struct i2c_driver for driver flags, and a
flag I2C_DRV_ACPI_WAIVE_D0_PROBE to tell a driver supports probe in ACPI D
states other than 0.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:03:55 +01:00
Sakari Ailus
b340c7d6f6 ACPI: scan: Obtain device's desired enumeration power state
Store a device's desired enumeration power state in struct
acpi_device_power during acpi_device object's initialisation.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-03 19:03:55 +01:00
Ville Syrjälä
c1d53cbd83 drm/i915: Use intel_de_rmw() for icl combo phy programming
Streamline the code by using intel_de_rmw().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-16-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:52:03 +02:00
Ville Syrjälä
d4e0f16325 drm/i915: Use intel_de_rmw() for icl mg phy programming
Streamline the code by using intel_de_rmw().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-15-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:51:44 +02:00
Ville Syrjälä
c86e187372 drm/i915: Use intel_de_rmw() for tgl dkl phy programming
Streamline the code by using intel_de_rmw().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-14-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:48:00 +02:00
Ville Syrjälä
88a2441522 drm/i915: Enable per-lane drive settings for icl+
Now that the link buf_trans, link training, and the
combo/mg/dkl/snps phy programming are all fixed up we can
allow per-lane DP drive settings on icl+. Make it so.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:46:03 +02:00
Ville Syrjälä
3e9cf8f055 drm/i915: Query the vswing levels per-lane for snps phy
Prepare for per-lane drive settings by querying the desired vswing
level per-lane.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:45:46 +02:00
Ville Syrjälä
a905ced613 drm/i915: Query the vswing levels per-lane for tgl dkl phy
Prepare for per-lane drive settings by querying the desired vswing
level per-lane.

Note that the code only does two loops, with each one writing the
levels for two TX lanes. The register offsets also look a bit funny
because each time through the loop we write to the exact same
register offsets. The crucial bit is the HIP_INDEX_REG
write that steers the same mmio window into different places.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:45:19 +02:00
Ville Syrjälä
305448e557 drm/i915: Query the vswing levels per-lane for icl mg phy
Prepare for per-lane drive settings by querying the desired vswing
level per-lane.

Note that the code only does two loops, with each one writing the
levels for two TX lanes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:43:52 +02:00
Ville Syrjälä
31e914a230 drm/i915: Query the vswing levels per-lane for icl combo phy
Prepare for per-lane drive settings by querying the desired vswing
level per-lane.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-9-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:43:24 +02:00
Ville Syrjälä
f20ca899a7 drm/i915: Stop using group access when progrmming icl combo phy TX
Program each TX lane individually so that we can start to use per-lane
drive settings.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-11-03 19:42:34 +02:00
Daniel Thompson
b77dbc86d6 kdb: Adopt scheduler's task classification
Currently kdb contains some open-coded routines to generate a summary
character for each task. This code currently issues warnings, is
almost certainly broken and won't make sense to any kernel dev who
has ever used /proc to examine task states.

Fix both the warning and the potential for confusion by adopting the
scheduler's task classification. Whilst doing this we also simplify the
filtering by using mask strings directly (which means we don't have to
guess all the characters the scheduler might give us).

Unfortunately we can't quite match the scheduler classification completely.
We add four extra states: - for idle loops and i, m and s for sleeping
system daemons (which means kthreads in one of the I, M and S states).
These extra states are used to manage the filters for tools to make the
output of ps and bta less noisy.

Note: The Fixes below is the last point the original dubious code was
      moved; it was not introduced by that patch. However it gives us
      the last point to which this patch can be easily backported.
      Happily that should be enough to cover the introduction of
      CONFIG_WERROR!

Fixes: 2f064a59a1 ("sched: Change task_struct::state")
Link: https://lore.kernel.org/r/20211102173158.3315227-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2021-11-03 17:21:37 +00:00
Pali Rohár
36de23a4c5 MIPS: Cobalt: Explain GT64111 early PCI fixup
Properly document why changing PCI Class Code for GT64111 device to Host
Bridge is required as important details were after 20 years forgotten.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-03 17:34:11 +01:00
Aric Cyr
7846972880 drm/amd/display: 3.2.160
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Anthony Koo
904b782980 drm/amd/display: [FW Promotion] Release 0.0.91
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Aurabindo Pillai
a81ddb758c drm/amd/display: add condition check for dmub notification
[Why & How]
In order to have dc_enable_dmub_notifications() more precise, add
one more condition to check if dc->debug.dpia_debug.bits.disable_dpia
is false.

Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Jake Wang
cd8cfbca6e drm/amd/display: Added new DMUB boot option for power optimization
[Why]
During Z10, root clock gating and memory low power registers needs to
to be restored if optimization is enabled in driver.

[How]
Added new DMUB boot option for root clock gating and memory low power.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Jake Wang
9959125a0a drm/amd/display: Add MPC meory shutdown support
[Why & How]
The MPC memory clocks should be powered down when not in use.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Jake Wang
0a068b683c drm/amd/display: Added HPO HW control shutdown support
[Why]
HPO is only used for DP2.0. HPO HW control should be
disable when not being used to save power.

[How]
Shutdown HPO HW control during init hw.
Shutdown HPO HW control during stream disable.
Enable HPO HW control during stream enable if DP2.0.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Wenjing Liu
edcf52caa9 drm/amd/display: fix register write sequence for LINK_SQUARE_PATTERN
[why&how]
write LINK_SQUARE_PATTERN_num + 1 for square pulse pattern.
Specs requirement to write this register prior to write LINK_QUAL_LANEX_SET.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Jimmy Kizito
589bd2f03f drm/amd/display: Clear encoder assignments when state cleared.
[Why]
State can be cleared without removing individual streams (by
calling dc_remove_stream_from_ctx()). This can leave the
encoder assignment module in an incoherent state and cause
future assignments to be incorrect.

[How]
Clear encoder assignments when committing 0 streams or
re-initializing hardware.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Roman Li
0b55313cbd drm/amd/display: Force disable planes on any pipe split change
[Why]
In scenario when 1 display connected with pipe split (2 pipes in use)
and 3 new displays simultaneously hotplugged via MST hub (4 pipes in use),
mpcc may get reprogram to other vtg, remaining busy.
In this case waiting for mpcc idle timeouts with error like this:
[drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc
RIP: 0010:mpc2_assert_mpcc_idle_before_connect
Call Trace:
dcn20_update_mpcc
dcn20_program_front_end_for_ctx
dc_commit_state
amdgpu_dm_atomic_commit_tail
...

[How]
Add pipe split change condition to disable dangling plane.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Bing Guo
1fc31638eb drm/amd/display: Fix bpc calculation for specific encodings
[Why]
1. YCbCr 4:2:2 8bpc/10bpc modes are blocked for HDMI by policy
2. A YCbCr 4:2:0 calculation error blocked some 4:2:0 timing modes

[How]
YCbCr 4:2:2 8bpc/10bpc modes are allowed for HDMI
Fix YCbCr 4:2:0 calculation error

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Yu-ting Shen
bca5bea403 drm/amd/display: avoid link loss short pulse stuck the system
[Why]
MST monitor sends link loss short pulse continuous but sink is
occupy by HDMI input to lead link training fail.

[How]
disable link once retraining fail.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Yu-ting Shen <yu-tshen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Felipe Clark
670d2a6240 drm/amd/display: Fix dummy p-state hang on monitors with extreme timing
[WHY]
It was found that the system would hang on a dummy pstate when playing
4k60 videos on a 1080p 390Hz monitor.

[HOW]
Properly select the dummy_pstate_latency_ms when firmware assisted
memory clock switching is enabled instead of assuming that the highest
latency would work for every monitor timing.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Felipe Clark <felclark@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:34 -04:00
Anson Jacob
7c5b0f2236 drm/amd/display: Fix dcn10_log_hubp_states printf format string
Fix spacing issue for the format string.

Addresses-Coverity-ID: 1446765: ("Invalid printf format string")

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:33 -04:00
Hersen Wu
a550bb165b drm/amd/display: dsc engine not disabled after unplug dsc mst hub
[WHY]
If timing and bpp of displays on mst hub are not changed,
pbn, slot_num for displays should not be changed. Linux
user mode may initiate atomic_check with different display
configuration after set mode finished. This will call to
amdgpu_dm to re-compute payload, slot_num of displays and
saved to dm_connect_state. stream->timing.flags.dsc, pbn,
slot_num are updated to values which may be different from
that were used for set mode. when dsc hub with 3 4k@60hz dp
connected, 3 dsc engines are enabled. timing.flags.dsc = 1.
timing.flags.dsc are changed to 0 due to atomic check. when
dsc hub is unplugged, amdgpu driver check timing.flags.dsc
for last mode set and find out flags.dsc = 0, then does not
disable dsc.

[HOW]
check status of  displays on dsc mst hubs. re-compute pbn,
slot_num, timing.flags.dsc only if there is mode, connect
or enable/disable change.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:32:33 -04:00
Linus Torvalds
655fedaad3 Just one JFS patch
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEIodevzQLVs53l6BhNqiEXrVAjGQFAmGCnuoACgkQNqiEXrVA
 jGS68RAAm/sHFB4Kha351GHiOzLTqdbecYR6g9FrGA1rjeum1H0KeCKxTZ8D+PAP
 pxUieR/n52UC+2qqnZWgJccRgVRdyMSqkVwRFJAGourv9cd8CILb0cZUaoCLaSpU
 GbHn2GPaOBbOOPGiCLY6AJ3IhhDY+2qhgC6M4eGGRW0uVl/vyuW/CuAUH0PUFL+y
 Xksf0qOLcr+nPCsqb+kIbY95ZRD67udtbtn09VW/T2wSCQeN1KJEBcs2zC0BB6Nz
 OwccEZrd0spyCh/15G4pzo2y5Pq4yu+ymeuxFEyCGRTzgT+CNFvS7URSW5fwOLUw
 Q20mi+Y0xu/4fVgGhkpIQXySaA1/4JTYfXDk65q5f1VpI5/7RAVOj8jRUWQKS+ra
 B0ihP1yJf91sh7W2ykxjQtqsw/+UukYJijiD4Jwk8LAOHd00bpsT6BnbF05dDFaH
 a7aWIzaon6qeJ5KDkgqhn9bRRjE5o3i2SqWu3W6QBEkaFYIIurej1m/FNYpgND1W
 c+z6VRO09N18g2vCVEG7nZ6i2ob7xjuB9aNS0r+btf6ZoKZ5pfxDpm8YcFcUlkS7
 pHSt2VnbRZBoYF5/9Hw+2MzEj8Gum3J/CiEfR4nLCjqXUfCdIHYHk+vZFwybeNXy
 YRVRYpTMX60re+vyoRcnVBG0Ua9kvanEVj4HxiZpEukVRi9bzhE=
 =0HJn
 -----END PGP SIGNATURE-----

Merge tag 'jfs-5.16' of git://github.com/kleikamp/linux-shaggy

Pull jfs fix from David Kleikamp:
 "Just one JFS patch"

* tag 'jfs-5.16' of git://github.com/kleikamp/linux-shaggy:
  JFS: fix memleak in jfs_mount
2021-11-03 09:23:25 -07:00
James Zhu
93cec18478 drm/amdgpu: remove duplicated kfd_resume_iommu
Remove duplicated kfd_resume_iommu which already runs
in mdgpu_amdkfd_device_init.

Tested-By: Ken Moffat <zarniwhoop@ntlworld.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:08 -04:00
Aaron Liu
e8a423c589 drm/amdgpu: update RLC_PG_DELAY_3 Value to 200us for yellow carp
For yellow carp, the desired CGPG hysteresis value is 0x4E20.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:08 -04:00
Mario Limonciello
91adec9e07 drm/amd/display: Look at firmware version to determine using dmub on dcn21
commit 652de07add ("drm/amd/display: Fully switch to dmub for all dcn21
asics") switched over to using dmub on Renoir to fix Gitlab 1735, but this
implied a new dependency on newer firmware which might not be met on older
kernel versions.

Since sw_init runs before hw_init, there is an opportunity to determine
whether or not the firmware version is new to adjust the behavior.

Cc: Roman.Li@amd.com
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1772
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Fixes: 652de07add ("drm/amd/display: Fully switch to dmub for all dcn21 asics")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:08 -04:00
Mario Limonciello
a750559132 drm/amdgpu/pm: Don't show pp_power_profile_mode for unsupported devices
For ASICs not supporting power profile mode, don't show the attribute.
Verify that the function has been implemented by the subsystem.

Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:07 -04:00
Mario Limonciello
a035be8a05 drm/amd/pm: Adjust returns when power_profile_mode is not supported
This better aligns that the caller can make a mistake with the buffer
and -EINVAL should be returned, but if the hardware doesn't support
the feature it should be -EOPNOTSUPP.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:07 -04:00
Mario Limonciello
067558177b drm/amd/pm: Add missing mutex for pp_get_power_profile_mode
Prevent possible issues from set and get being called simultaneously.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:07 -04:00
Mario Limonciello
9a40d0448f drm/amdgpu/pm: drop pp_power_profile_mode support for yellow carp
This was added by commit bd8dcea93a ("drm/amd/pm: add callbacks to
read/write sysfs file pp_power_profile_mode") but the feature was
deprecated from PMFW.  Remove it from the driver.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:07 -04:00
Graham Sider
cc22b92761 drm/amdkfd: update gfx target version for Renoir
Previously Renoir compiler gfx target version was forced to Raven.
Update driver side for completeness.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:07 -04:00
Mario Limonciello
c92f909614 drm/amdgpu: Convert SMU version to decimal in debugfs
This is more useful when talking to the SMU team to have the information
in this format, save one less step to manually do it.

Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03 12:22:07 -04:00